Cable Chain 25x57
This Cable Cahin was inspired by Marius Hornberger design Its redesign to fit my needs with endconnectors This is for my PrintNC machine.
- Downloads
- 471
- Likes
- 64
- Rating
- 5
23 models
This Cable Cahin was inspired by Marius Hornberger design Its redesign to fit my needs with endconnectors This is for my PrintNC machine.
Mounting bracket 3 sides-40x40x25x5 ca.: 40x40x25 PETG 0.4mm Nozzle ca 50min ca.: 4,4m Filament no Supports 50% Infill
[EN] Protective frame for rfid keychain 25mm x 51mm. [RU] Защитная рамка для RFID брелка 25мм х 51мм, например "тройка" или ключ от домофона ПИК Print Settings Printer: FDM Rafts: No Supports: No Resolution: .2 mm Filament: pla Notes:…
A compact magnetic riser designed to hold thin materials flat on a laser cutter honeycomb bed. The block contains a 25×5mm magnet that securely attaches to the steel honeycomb surface, keeping the riser firmly in place during cutting or…
I modeled and printed some custom zero stop rings for my Vortex Strike Eagle 5-25x56. I figured I would post as I had seen some people asking about custom ones online when I was looking. I printed in PLA for now, but I am sure that it…
Mounting bracket 40x40x25x5 ca.: 40x40x25 PETG 0.4mm Nozzle ca 40min ca.: 3,1m Filament maybe supports, for me it worked without 50% Infill
A simple base adapter for older Warhammer The Old World, designed to have just enough clearance for models whether you want to glue them in or leave them swappable, this design uses 3mmx1.5mm magnets to keep your soldiers in ranks. This…
This is an end cap for a rectangular tube like you see in some desks. The tube in the picture where I made this for measures 22X47 mm inside and 25X50 mm outside. https://www.3dwp.nl
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 1.5-2mm² cable M4 screw holes
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 3mm² cable M4 screw holes
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 4mm² cable M4 screw holes
Schale Durchmesser 250mm für Silwy Magnet System zum einkleben von Magnet 25x5mm
25x50mm base with holes for a magnet
inner 25x55x25 mm, wall 1mm so outer 27x56x26 (bottom +1mm, -1mm top cover stuck inner) 3mm x 2mm hole seem not enough for cable out
The updated model now has a lower overhang angle (<45°), with the upper part centered and improved sturdiness. 20% infill PLA or PETG No need for support Suits for 6mm² cable M4 screw holes
UPDATE: //2 of the Mounts had some fitment issues. redesigned and reuploaded those as “Rev2” Dragchain Mount for the StrongholdPro CNC to hold bigger, sturdier dragchains from aliexpress. Dragchains used:…
Use this to play regiment style games with your oval based miniatures. A press fit recess for 2mm by 6mm round magnets is located at the bottom for easier transport.
3x1 25x50mm or 3x2 25x25mm movement base
Gadgets box,Sorry for the poor quality of the photo.Download, print, you will like it, LIKE.
Dosenhalter für Silwy Magnet System zum einkleben von Magnet 25x5mm
Eierbecher Durchmesser 45mm für Silwy Magnet System zum einkleben von Magnet 25x5mm
Mounting bracket 40x40x25x5 ca.: 40x40x25 PETG 0.4mm Nozzle ca 40min ca.: 3,1m Filament maybe supports, for me it worked without 50% Infill
Mounting bracket 3 sides-40x40x25x5 ca.: 40x40x25 PETG 0.4mm Nozzle ca 50min ca.: 4,4m Filament no Supports 50% Infill