RIKON 10-305 Bandsaw Zero-Clearance Insert
100% Infill
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 105
- Likes
- 10
- Rating
- 5
298 models
100% Infill
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
Used this mount to attach my switch with a tesa stripe under my table. Because the mount is so minimalistic it only works with good filament and good printer settings. happy printing!
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Tiskl jsem v PLA výška vrstvy 0,13 segmenty 3 a hustota 18 bez podpěr..
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant
Requires:Original G305 PCB, Scroll, Side Buttons and Screws. Requires 4* 5mm Diameter 3mm Depth magnets. Requires 4* 5mm Diameter 3mm Depth magnets. (may need glue) rotate top -55 degrees, rotate Rear 90 degrees. If you enjoy this mouse…
FINALLY FINISHED I've tested the final version of this mouse for a couple months now and I'm convinced it is pretty much as good as it will get. Enjoy! Background Story This Model was initially made for school and then continued in my…
Full instruction writeup on instructables: https://www.instructables.com/Razer-Viper-Mini-Wireless-Mod-G305/ It will likely ask you if the baseplate file should be separated, it should not be. I can no longer combine the bodies in Fusion…
UPDATED: Slightly larger tolerance (0.1mm diameter for the bearing balls). Choose random seams if you printer is not well-calibrated. I recently needed a slimmer ball bearing for a spinner project, so I did my own take on ball bearings to…
LogitechG305 Mod compilation. You will find everything you need to fully modify your G305 and tinker with it to your hearts content… or maybe just create your own mods :D Update 2022.7.6 : Added more mods including an insane 20-30gr mod…
Originally published here: Samsung Galaxy A20 & A30 & A30s a205 a305 a307 case by tato_713 - Thingiverse This case is for the Samsung A20 phone (models started with a205), for the A20s (a207 models) look here . This case was tested on the…
Sharing my custom 3D enclosure design for the Lenovo M90q Gen 1, featuring the MSI RTX 3050 LP, a 3.5-inch LCD screen, and an RGB fan. This project involved designing the 3D case model using SketchUp and printing it with PETG filament on…
-58g with holes / 63g without holes. Weight will vary based on battery and print material. -Wireless using G305 Internals -Rechargable AAA via magnetic microusb tip -Designed for FDM printing -No soldering required FREE THINGIVERSE TEST…
A really simple vertical stand for the Dell OptiPlex 3050. The PC just slots in and the stands prevent it from tipping over.
about 5.5 ft. reinforced with a combination of .5 and .25 in dowels. have fun. Category: Props
For best results I recommend Resin printing. I included an example model of how I Resin printed this on a Anycubic Photon Mono X using Anycubic standard Black Resin. 2 Layers of dark gray spray-paint (I ran out of black spray-paint). 2…
Remixed from: https://www.thingiverse.com/thing:4600978 https://www.thingiverse.com/thing:3823244 https://www.thingiverse.com/thing:3969266 I used the tinfoil and lithium battery for a big while and I was looking into making a battery…
A spare wheel for the Husqvarna Automower 305. Since the originals are too expensive I have drawn this replacement. I hope that it is durable and also copes well with slopes. But that will show over time. Rim and profile are screwed,…
I have had success FDM printing this model. Mods I did to the Logitech g305: Replaced the AA battery with a AAA battery and spring. SLA printed back cover Weight 79g total with the SLA print coming in at 3g compared to the stock 7g back…
Elevate your Dell Optiplex 3050 Micro with these custom 3D printable model files designed to accommodate an MSI RTX 3050 LP graphics card. This set includes: 3D Case : A custom-designed case tailored for the Dell 3050 Micro, providing…
Just a Remix of the Logitech G305 battery cover with Logitech Logo
Alternative mouse shell for G305 - Semi Ergo Shape - GPRO Feet compatible - LiPo replacement. Best filament with most accurate results is Extrudr XPETG so far. It does not warp like PLA or regular PETG and has good sanding properties.…
This model is compatible with the lego system.
LSI 9305-16i or LSI 9305-24i fan shroud. This is a remixed design from barichardson with most overhangs removed to be more easily printed. Snaps onto the heat sink without the use of screws. Four STL files for both the 16i and 24i with…
Switch dimensions: 94mm width 26mm height without the feet mounting holes: 6.5mm diameter 35mm center distance
A reference STL for the EMAX ES 3054 17g servo. All dimensions are approximate per my measurements using my own servo and the spec drawings. If you'd like the Fusion 360 source feel free to msg me with your email.
Meet the sub-40g Z(H)ero Mouse, inspired by Optimums Zero Mouse. Parts required: -Logitech G305 Lightspeed https://amzn.to/3EqIv8R -Lightweight Lithium Battery https://amzn.to/4hvylmi No additional screws/hardware required! I designed…
This model is compatible with the lego system.
This model is compatible with the lego system.
A small shelf designed to hold the MikroTik CRS305-1G-4S+IN switch in place and connect to a server rack. There are small pegs to hold the switch in place: it is a somewhat tight fit, but the switch can be set atop the pegs and slid…
I have a Dell Optiplex 7050 Micro with no faceplate and no power button. So I rebuilt it. Optimized print profiles for Bambu Lab printers available here:…
NEM bus for Marklin 3054 shortcoupler
Made this 3.5" HDD caddy for my Dell OptiPlex 3050, i wanted to add more storage but it only came with a small SSD. The screw holes might not match 100%, since i did not use them, its a tight fit and i don't plan on shaking my PC! also be…
This tractor is not meant for young boys. This part broke fairly quickly and instead of buying a new part I created this in Fusion 360. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2…
Spare maintenance tool to open body on Husqvarna Automover 305. Tho tool has a protruded edge at the back to allow easier removal from its space. When the tool is inserted into its space the distance should be facing downward.
Used filament as a pin for hinge and latch. The mouse fits comfortably without moving around and without the side buttons been pushed while inside.
If you have a Samsung refrigerator with a French door, you know there's a little mullion flap between the two sides of the door that slides into place when the door closes to insulate the gap. You may have also at some point accidentally…
Profile "U" for LED Light Bar Prusa i3 MK2 / MK3 lighting. Fitted perfectly, it enters with a slight resistance. To avoid the bending of the profile from the LED heat, I recommend printing the element with 70% filling. The LED strip must…
This model is compatible with the lego system.
Originally model was prepared for GS305EP switch, but considering size of other GS equipment, it should accommodate most of them. Model has tolerances, so switch does not have to be forced into it. End plate requires M2 screws, holes are…
So we've got the ZS-VML here. A 3d printable mouse designed for FDM printing. It's a symmetric mouse that's based off of the Razer Viper Mini. It's got a lower hump, higher front, and slightly wider sides. You can find this mouse and more…
This is a G305 Internals Shell shaped like a mix between Sensei Ten and Endgame XM1. You need 6 6x3mm magnets and quite a few M2 Screws in different lengths - you can buy a set on Amazon and you will be fine (Button/Socket/Flat doesn't…
This model is compatible with the lego system.
I got this Lenovo P330 Tiny back in March of 2024. I mostly used this as a NAS. Its stock configuration included a 2 GB external GPU, which worked fine for basic tasks. I also played some games on it like FH4, and FIFA 18. While exploring…
Over the years I would end up dropping the remote a few times, in doing so the battery cover ended up breaking so for a long time I was using tape to hold the battery in, I then got an AnyCubic Photo Mono. From using tape to hold the…
Replacement piece OMAR IKEA 10055941 / 130531 to adjust the height
Transform your workspace with our custom-designed wall mount for the Optiplex 3050 computer. Crafted with precision, this 3D-printable model offers a perfect blend of style and functionality, enabling you to securely hang your computer on…
Mountingbracket for Netgear switch GS305 or GS308 with a height of 29mm
This model is compatible with the lego system.
This model is compatible with the lego system.
Turn your Logitech G305 into the best ergo mouse in history! (which is G703/G603 imo) I made this because the G305 is still the cheapest good wireless gaming mouse in my country. HUGE credit to Rollinsloth's RS4 design;…
First two pictures are the “Big Daddy”. Second two pictures are the “Slim Boi”. The Big Daddy holds the G305 and three AAA batteries. The Slim Boi just holds the mouse. Print settings I used in the pictures are 0.3mm layer height, really…
I had some issues with the original model from AuroraProjects, the covers didn't want to snap to the bus bars, and some of them cracked on the outer walls. I replicated the original design from the STL in onshape, with the follwing…
These are mounts for MikroTik Switches CSS610-8G-2S+ and CRS305-1G-4S+. The rack ears for the CSS610-8G-2S+ are the same as those for the CRS310-1G-5S-4S+ in my previous mod . The other parts seen in the photos are from NatalieT's project…
This is a remix of the VIPRO v1 Mouse G305 Shell that changes the battery to a USB charging AAA battery. Additionally the design was modified to allow it to work with later G305 PCB revisions that have a few larger components that…
10" server rack for Netgear GS305 5 port switch. Pretty simple design, I printed face down using mouse ears.
Custom Bracket for Yeston RTX 3050 Low profile card to fit Lenovo M720q. Allows for easy closing of top part of case. Printed in 100% infill PLA+ or can use PETG.
This model is compatible with the lego system.
This model is compatible with the lego system.
Wanted a lighter, more ergonomic base for the G305. I wish I could transition away from Google Sketchup so I could make the polycount higher and make it more polished, but this model took me about 45 hours of work and it pissed me off…
*(legal disclaimer at bottom) Safety: If undertaken please make sure it is legal in your location and fly model rockets outside and away from people, property, and living things, the methods in this guide can be dangerous and might not be…
This model is compatible with the lego system.
A 10-inch rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't installed them. This…
Overview This is a custom, 3D-printable cooling shroud designed specifically for the Yeston RTX 3050 6GB Low Profile GPU . It replaces or modifies the stock cooling layout to allow a cheap $5 AliExpress blower fan to pull fresh air…
A 19-inch, 2-part, modular rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't…
This model is compatible with the lego system.
There is no soldering needed. I designed it to work with a triple A battery in lieu of having to solder a bit and using a different one. You will need to cut a few things. Specifics can be found in the google doc which details all…
My kids broke yet another part of the hitch assembly so I've created it from measurements in CAD. We only have a dump wagon so it has not been tested with any other components. They've also lost the plastic screw which raises/lowers it,…
Snaps onto the switch and locks into side vent holes with small pegs. Designed with 80mm fan and M3 brass inserts in mind. Supplied F3D file can be used to edit the fan size and brass insert holes. Best to be printed with fan side on the…
remix for XL, printed solid 300g PETG
Yeston updated there RTX 3050 LP model and flipped the HDMI and DPI ports. This is the updated version for the change.
This model is compatible with the lego system.
Movement holder/casing ring for the Miyota 2305 (NOT 2035!) quartz day date movement to be used in Seiko NH series watch cases. Since the Miyota 2305 movement is much smaller than the NH34/NH35/NH36 mech movements, a spacer is required to…
This is a 1x6 Gridfinity compatible holder for the GemRed 82305 digital angle finder. It is designed to fit inside the top drawer of an IKEA ALEX drawer unit. I have also included a model of a bounding volume of the tool itself, which was…
ATTENTION!!! Don't forget to add a pause in the Slicer at the exact layer height to put the magnets in place. Make sure to put magnets in correct orientation!!! Model uses 3x6 mm diammeter neodimium magnets.
guide: https://medium.com/@zoroseerus/zs-a1-3d-printed-symmetric-wireless-mouse-guide-607e6e8e19aa -Mass will vary based on battery and print material. -Wireless using G305 Internals -Rechargeable AAA via magnetic microusb tip or 675 coin…
This is a proof of concept of a low budget lightweight mouse mod based on the logitech G305 wireless mouse. If you buy a standard logitech G305 this model uses all internals and screws that you will find when taking that mouse apart.…
This file contains my personal documentation for integrating an RTX 3050 GPU with the EXP GDC TH3P4GAN GPU Dock, complemented by a custom-designed 3D-printed case. Inside, you'll find detailed design notes, CAD files, assembly…
Attention: when doing first cut, plz reinforce the plate with som tape. PLA may splitter otherwise. BE CAREFUL Print it Install it with the original screws Reinforce it with tape Make a VERY CAREFUL first cut with safety glasses on Remove…
Edit 22/08/2026 Found and uploaded the, 'flat', version of the battery cage. Thanks to @Galaxy_5255671 for giving me motivation to look for it! Edit 15/2/2026 Added Back V2.1, with a bigger 7mm rear skate land and a much improved side…
This mount holds the Netgear GS305E switch in a 10" rack. You have to slightly force the switch into the mount. This is deliberate for the switch to stay in place even when yanking the cables. The switch is mounted assymetrically, I've…
Since the wall mounts I found with a quick search didn't really appeal to me, I developed my own version. The wall mount consists of 2 parts that are screwed by means of M3 screws and threaded inserts. The switch is tightly enclosed by…
The plastic part of scroll wheel has worn out and became loose, which caused the scroll wheel to not to rotate freely. I designed this model to replace the plastic part. After disassembling the mouse, you need to remove the plastic…
Allows for mounting of a MikroTik CRS305-1G-4S+IN almost anywhere using double sided sticky tape. The posts of the print go into the bottom of the router and then double sided tape goes on the bottom of the flat piece. Stick it where you…
Das obere Teil wurde aus PLA gedruckt, ggf. wäre hier PETG nicht verkehrt. Das untere Teil kann an das Oberteil angesteckt werden und wurde aus TPU 95a gedruckt. Mein TPU war leider etwas feucht und es wurde zu langsam gedruckt, deshalb…
I printed this on its side with only necessary support. I'm not sure which is best for it. The fit is excellent. Be very careful with the clip on the heatsink as the heatsink is not rigidly mounted and the chip on the PCB has no metal…
You've probably seen the A1 Mini mystery kits for a printed mouse. I think it's pretty neat that Bambu Lab is including those as there are plenty of others to try as well, like this one. It's an asymmetric shape I made that has design…
This model is compatible with the lego system.
Dell Optiplex 3050 SFF 3.5" HDD Tray Adaptor Use in place of included 2.5" tray to run a 3.5" HDD Especially useful when using a m.2 boot SSD Printed and verified fit
Theres the STL and the Ondsel file, i printed it at 100% and it worked ok, Only change i made after print was add a 1mm fillet on the recepticle to make it stronger but its manly aesthetic. Use a Brim, the side where there is no holes…
I've designed a 6x1 Gridfinity holder specifically for the Klein Tools 32305HD, which I believe is only available at Home Depot. Amazon might have a similar one (32313HD), but I'm not entirely sure if it will fit. I initially printed it…
This model is compatible with the lego system.
I prefer to keep my switches off the shelves and add them to a standard 19" server rack instead. I recently picked up this GS305P and adapted a rackmount adapter for it. 1. Non-printed Parts Required (4) Server rack Cage nuts (4) M6 x…
This model is compatible with the lego system.
https://www.printables.com/model/532449-dell-optiplex-3050-hdd-caddy/remixes this ^^^ but i fixed all the problems Tight clips Tight corners All fixed
A shelf for mounting MikroTik CRS305 in modular rack. Can be mixed and matched with: blank panels: https://www.printables.com/model/898351-rack-mount-empty-panels-small-printer-friendly patch panels:…
This would'nt be possible without Mouse Shape Tester Megapack , so thanks Scout339 :) I have a small desk and too many mouses, this was a way a find to keep thigs less chaotic
I'd printed out one of Masiakla's rack mounts to use with a GS308v3 switch, but as I was considering the way I'd use it in my own setup, I realized I wanted to have at least one keystone connector to run a cable through behind the rack.…
CWWK/Topton Affordable Edition Riser Base to accommodate 80x25mm fan at the bottom Combine with ZeroFlow's 120mm Top Fan mount for significant cooling benefits. Results: Stock fanless 48C 120mm Fan only 30C 120mm Fan and 80mm Fan 24C…
Logitech G305 conversion to G9x geometry. Printed on Elegoo Saturn MSLA using Sirayatech Fast Smoky Black and 10mL of Blu to increase durability. Print should work fine for FDM but will require a lot of support, PETG recommended as a…