Cover for UGREEN 130W Autoladegerät
Cover for UGREEN 130W Autoladegerät .
- Downloads
- 16
- Likes
- 0
- Rating
- 5
86 models
Cover for UGREEN 130W Autoladegerät .
The new M1 and M2 MacBook Air (and possibly other recent Apple devices) come with a 30W charger that does not provide a method for wrapping/storing the USB-C to USB-C or USB-C to Magsafe cable along with the charger brick. This slides…
A 19-inch, 2-piece, modular rackmount for up to 3 of the Unifi U-POE-at adapters . comes in either a 3 slot or a 2 slot version for either side. This mount is part of a 19-inch modular rackmount system designed by @Mauker , you can mix…
This is a mounting point for Lenovo Legion 300W and 230W charger. It's designed to be attached to the underside of a table so that the charger isn't laying on the floor. You can also quickly and easily unattach the charger if you need to…
A 10-inch rack mount for up to 3 of the Unifi U-POE-at adapters . It can be a good option if you don't have a PoE+ switch for your devices. To install the adapters, simply slide them in from the front of the mount. I have also included a…
It doesn't require any special settings, I printed it in PETG at 0.2mm resolution. It will probably fail to work if printed with a higher diameter nozzle than 0.4mm because the lip that holds the lid might not be strong enough.
This is a printed air-assist nozzle for the NEJE 30W and 40W "new style" laser modules with the amber/red window. Simply replace the window with the nozzle part and insure the lens assembly is properly fitted into the cone. Attach a 6mm…
This model is a drop-in replacement for the laser module's tinted acrylic window and slides directly over the laser's focusing lens. To achieve an airtight fit around the focusing lens, it is recommended to apply a few turns of Teflon…
KS0 Pro Stand for 230W Power Supply.
A remix of a 240W charger mount for a popular charger used by a lot of Dell devices, including the D6000 docking station. I would advise to print it in PETG because chargers/adapter can get hot.
This bit was inspired by the 230 spin track from Metal Fight. It is a free spinning bit that works better the lighter it is. Heavier bit = less stable.
70W adapter verision here https://www.printables.com/model/653755 You need to print the box padding in TPU and the rest in PETG. You will also need x6 M3 screws of 20 mm of length. This is a mix-match of a bunch of models, some mine, some…
I build the power bank by assembling a 5s Li-ion battery, hooking it up to a BMS, and adding a few more modules to make it all work. The Power Bank has 3 USB Type-C ports for charging and I added an OLED Display which shows detailed…
Made for Dell LA130PM121 19.5V / 6.7A Power Supply Charger. Print instructions Steep angles, so print with cooling or supports.
Components you will need: 12x18650 cells, BMS preferably over 20A, power bank module(link in the description), cables that can withstand over 10Amps (the BMS is optional as the power bank module already has one, but i don't trust it)…
Dremel Grip for Hilda HLD 130W (remixed - modified diameter)
Corner mount for Tapo cameras - C520WS (likely for C510W C500 C530WS too). Enough space within to hide the cables.
My LENOVO LEGION 5 laptop spends most of time on the desk. So, I had to find the way to hang its charger under the desk top, that it doesn't take up additional space. That is the result, a simple hanger for LENOVO 230W charger (type:…
This laptop cable organizer was designed to be compatible with the dell 130W charger. The brick portion of the charger stays in place with a friction fit.
Remixed the 40W MacBook charger wrap to fit my wife's 2020 MacBook Air USB-C charger. There are no cutout's for the plug it's just a wrap around the brick. I did add a few clips to clip the USB-C cable onto it though. Category: Electronics
Simple laptop power supply mount (Dell 130W psu. ) Models Tested: DA130PM130 DA130PM200 Uses counter sunk screws, for my purposes I used 4.0 x 20 mm screws to mount underneath a cheap ikea desk. I used 20% infill, and printed in PETG.…
Print two pieces (mix and match you can print 2 of the same or one each), attach the pieces with M6 bolt+nut and you have your 19" rack bracket for 6 of your POE+ adapters I print it with PETG and 0.8mm nozzle with 0.5mm layer height for…
Fits really well, includes an access hole to adjust laser unit position. Use the screw holes in the back to secure the sprung aluminium mount they give you and mount onto the rear portion of the MPCNC Primo 57mm spindle holder The reason…
This Mostly-printed Z-axis for Neje 30W/40W laser modules is a mashup/modification and remix of a couple of designs: Silvester's 3D-Printed CNC Z-axis for Nema17 (Pinshape) and leadscrew/nut from 3DPRINTINGWORLD's Linear Ball-Bearing…
Outer dimensions : 74.1 x 30.6 x 53 mm Inner dimensions : 66.6 x 23.1 mm
one piece print, with screw hole for mounting. Print Settings: 0.4mm nozzle 0.2mm layer height
Supports a 230w Lenovo Legion I5 Power Supply. It mounts under A desk using some #6 x 1in Wood Screws. Prints in 2:15 and i used PLA and its holding great. Polymaker Polyterra Black Home Depot Wood Screws #6 x 1in Print time - 2:15 .2…
Very easy print and assembly. Stand bolts into the projector with two M4 bolts and bolts together with four M4 socketed cap screws and nuts. does not cover any fans or ports, made for Vankyo v630w. I found that even though the manual says…
remixed this from Jmusicman1993s design to accommodate for an AU/EU plug Print Settings Printer: Prusa Cocoon Create i3 mk2s Rafts: No Supports: Yes Resolution: 200 Infill: 38 Filament: 3d fillies PLA black Notes: Print with tree supports…
Simply mount air nozzle on focusing lens. This should also fit on other Neje laser modules like A30130 External diameter of air input is 5mm. Nozzle mounted on laser: https://www.youtube.com/watch?v=fPiL8KUA4E4 Category: DIY
We got this nifty little pottery wheel to use for wet-sanding custom resin dice, but it didn't have a splash guard and I didn't find a design available. So, here's my stab at it.
HP Dock Cover For some reason, HP decided to make the entire top of this dock a power button. This cover is made to prevent anything (kids, cats, books, etc.) from accidentally shutting down your laptop. Side-USB file has a cutout for…
I replaced the old hi-fi system in my daughter's room, but I didn't want to get rid of the speakers. So I build a Moode Player with some parts lying around my workshop. I just bough the Raspberry Pi DigiAMP+ board. The front face has been…
3D-printed replacement mount nut for Xiaomi Wireless Car Charger 30W W03ZM The original nut broke, and I couldn't find a replacement for sale. You might need to slightly scale the model. I printed one on a Creality K1C and it fit…
Yet another under-table adapter holder
I've created this remix with PrusaSlicer to fit the Ubiquiti PoE+ Adapter (30W)
My wife's laptop has this monster of a power block, an ASUS ADP-230GB B. When her laptop is under load it gets hot sitting on the bed or the carpet - read 130°F/55°C while she was playing Borderlands. I just wanted something to give it…
This adapter lets you mount a NEJE 30W Laser Module to your 65mm spindle clamp on your cnc router. The adapter is attached using the existing FOUR M3 fasteners which hold the fan and internal PCB to the aluminium extrusion of the laser.…
djk4linux's air-assist nozzle for the Neje 40W lasers is a bit long for cutting thick materials. So I remixed it for some shorter options. https://www.thingiverse.com/thing:5073015 The original nozzle extends 15mm from the base of the…
Modèles avec vis ou aiment. Aiment : 6x3mm 4x Impression : Couche : 0.2 Remplissage : 15% Supports : oui
Organizer with clips for the charger of your Apple Macbook Air 2025. This is a 30W charger with one flat side and one curved side. Dimensions around the charger are 49mm x 28mm.
This model is designed to not need supports. Just print two copies.
Gridfinity compatible bin to safely store Apple 30W Charger with European Plug Apple Logo and 30W is scaled down and can be printed in 100%
A Neje 30W laser module air assist. (for 40W module see https://www.thingiverse.com/thing:5194498 ) It's a very compact one which still enables access to the focus ring. There are two versions with a 4 and 6mm inner tubing. Both are…
Adapter Plate for mounting Atomstack 130W laser onto most generic laser cutters that use V-Wheels on 20x20 extrusion. Plate also mounts external board. Includes clips for both cables and air hose.
90° Kamerahalterung für die Tapo C530WS zur Montage an einer Hausecke oder Wandkante. Die Halterung wird an zwei Seiten der 90°-Ecke befestigt und verlängert die Kameraposition um ca. 100 mm von der Wand weg. Die Kabelführung für das…
Cable management accessory for the 230W HP Victus power adapter.
The Fusion model has a "desk_thickness" parameter, adjust that for your desk.
Dell 130W charger holder for vertical or horizontal mount. No needs for support. Charger model HA130PM130. Dell models: Xps 15 9530 9550 9560 9570 7590 Precision 5530 5510 5540 Do you like my models? Consider buying me a coffee .
I change dimmensions and side holes Its under desk holder for 330W GAN CHARGER FROM ALIEXPRESS Profile for A1 MINI
The switches support of my range hood BROAN QP130WWC litteraly broke down like a chocolate barre. After looking for a replacement, the part number is S97017729, and since I'm a cheap bastard, rather than pay 25ish dollars plus shipping…
A new plate, to mout the new NEJE 30w and 40w laser modul to the Ortur Laser Master 2 7w, 15w and 20w frame. Print Settings Rafts: No Supports: No Resolution: 0,4 Category: 3D Printing
I decided that I was tired of my Lenovo chargers sitting on the floor and wanted something to mount it to the under side of my desk but still be able to take it out when needed. You should be able to mount this with double sided tape or…
This mount is a remix allowing you to have 4 support points rather than just 2 while also only needing 2 screw points.
Other materials such as pictures
Staubschutz für die Okularseite. Einfach raufdrücken - hält von selbst. Dust protection for the eyepiece side. Simply press it on - holds by itself.
I lost my lens caps to my Swarovski SLC 8x30WB binoculars, so designed and printed replacements using Fillamentum FlexFill TPU 98A on Prusa Mini with 0.6mm nozzle and 0.2 layer height with 30% infill (not that it uses the infill at all).…
Print with 3+ parameters for strangth Filament: whatever you have. This print is in ASA and PETg. PLA would also work just fine
A secure mount for the slightly larger Ubiquiti PoE Adapter, fits into the 1U Modular Tray system. Prints at 0.2mm Layer Height, facedown. Needs supports for the internal locking clips.
I remixed this model to not have chamfers on the front face.
Simple roof for the Tapo camera, integrated cable holder. I didn't quite trust the tiny screws that came in the box. Print Settings Material: PETG Perimeters: 4 Texture: Fuzzy Skin (looks great and hides layer lines)
I wanted to create something original, small, sturdy and good enough to not only carry both the charger and the cable together but do so without increasing the thickness normal to the large flat area of the charger. I also wanted to avoid…
Print one of each and 4x Legs (no supports). Assemble the TDA7297 by fixing the knob bolt to the Base. You can use some super glue if you want it to be more stable, but not necessary. The sound is great, I recommend using traslucent…
A ridiculously overpowered 3D printed handheld fan powered by FPV drone parts. This build uses a 2207 brushless motor , a 5-inch propeller , a 30A ESC and a 3S LiPo battery. The body is designed to hold the electronics neatly inside,…
The specific model is this one: https://baseusonline.com/product/79/baseus-circular-plastic-a-c-30w-pps-car-charger-black#item_358 Diameter is 2.5cm. Will likely work on the other 30W one that is dual USB A (which is why I didn't put in…
Adapter for nice mounting of Vankyo V630W projector to Meliconi 400CE ceiling mount. Holes on mounting pad on Meliconi have 100mm pitch. For mounting you need: 4 pieces 6x14mm inbus screws with recessed head, 4 washers and 4 lock nuts…
Dell 130W GaN Slim charger holder for vertical or horizontal mount. No support needed. Power adapter Info Do you like my models? Consider buying me a coffee .
here are my charger block cases for Apple 10W(usb) 20W(usb-c) and 30W (MacBook Air m1 usb-c)
Ursprünglich eine Litphane Box aber hab festgestellt, sie passt perfekt zur Drone.
This is my first model i am posting publicly The model is a (hopefully) dimensionally acurate recreation of a realme wall charging brick (plug) so if you ever need it for something here it is
Here is a small (66mm diameter) cup holder insert to keep your eLeaf iStick 30W mod and a couple of 510 threaded tanks in place. Category: Other
I designed this cooler for the UGreen 130W Car Charger because I wanted to be able to charge my power bank at full speed. It mounts around the charger without requiring any permanent changes. When stock, the charger overheats when…
This mount allows you to attach the led driver directly to the back of the IKEA BESTA shelf (or any other). Included is the fusion360 file (it's a bit messy) to allow for your own modifications. Versions There is a 45deg angled version…
Clear the cable clutter from your workspace with this sleek, low-profile mounting bracket designed specifically for the Dell 130W power supply (brick dimensions: approx. 132mm x 60mm x 23.5mm). Whether you want to screw it to the…
Slightly modified version of the Dual iStick Cup Holder for 30W model iSticks. Work in progress since I haven't printed it yet. Updates: 2015-06-02: Increased size of iStick holes for better fit. Category: Automotive
This attachment holds your cable close to the charger in your bag without getting tangled. The charger will still fit in your socket with the attachment connected.
In case you lose yours or just want another; This is a replacement Laser Focus Gauge for the Roly LaserMATIC MK2. It works for both the 20W and 30W Modules. This is slightly different from the MK1 so this only works for Mk2 LaserMATIC.…
Designed a small bracket to attach to the back of the UCG Fiber 10in Rack mount to help manage wires and bricks a bit better. It is affixed with 2x M3x16 SHCS. I wanted to use four ideally but unfortunately there isn't enough room and I…
Protector de PLA para cargador modelo UGREEN Nexode 30W Mini, espero les sirva Se le puede adherir el siguiente organizador de cable para portarlo mas comodamente…
Cable management bracket designed to mount directly to two of the mounting holes on the 40 mm fan on top of the NEJE laser module. The holder keeps the laser cables securely routed and out of the way while maintaining a clean…
The Yihua 929D-V has an inherent weakness where the iron mounts to the body. Iron mounting screws thread into a thin ring which is then a potential break point. In fact, mine broke. I made some ABS glue by melting ABS in acetone, glued it…
Dell 130W charger holder for vertical or horizontal mount. No needs for support. Charger model HA130PM130. Dell models: Xps 15 9530 9550 9560 9570 7590 Precision 5530 5510 5540 Do you like my models? Consider buying me a coffee .
Dell 130W GaN Slim charger holder for vertical or horizontal mount. No support needed. Power adapter Info Do you like my models? Consider buying me a coffee .
Cable management accessory for the 230W HP Victus power adapter.