Lego Compatible (48336.dat) Plate 1 x 2 with Handle Type 2
This model is compatible with the lego system.
- Downloads
- 856
- Likes
- 45
- Rating
- 5
37 models
This model is compatible with the lego system.
RC10 Gold Pan Servo Mounts These are very simple but necessary. They replace Associated part Number 6366. NOTE: The originals required the use of 2 washers under the rear servo mount. See the attached picture from the RC10 Manual. To…
Quick and dirty remix to make a ATGM336H GPS antenna fit also. I've added a spacing of 20.6 by 6 by 6 mm extra in the top. https://www.tinytronics.nl/en/communication-and-signals/wireless/gps/modules/atgm336h-gps-module
I have re-modeled all the pieces to accommodate a Stealthburner with the following modifications: Chaoticlab TAP CNC (I am pretty sure everything works just as well even if you do not have a TAP, however it is untested) Bigtreetech EBB42…
This model is compatible with the lego system.
Marlin 336 30-30 Bore Guide – A practical solution for hassle-free cleaning. Designed to fit snugly into your Marlin 336 30-30, this bore guide simplifies the cleaning process, making it quick and efficient. No more fumbling with…
This is a version of the Brio 33369 utility pole, set on top of a curved track. The track has the same curvature as the standard “E” track with a side platform for the utility pole to stand. I designed this model for MMU printing, but it…
I wanted to use the Tamiya MFC-03 and use the interior dash and seat for my Tamiya AROCS 3363. I am sure it will work on the ACTROS. I got this idea from Bob at Hobbyconcepts-LLC video were he made this bracket out of aluminum. This works…
Replacement hopper for the BRIO Tipping Wagon (product number 33614 in red, but could be printed in any color). Photo shows my replacement on the left, OEM on the right. Printed upright with supports under the pins.
I was missing the Guide for my Bosch Planer (Model #3365). I used Cargy's design and slightly modified the bracket file to make it work. I adjusted the tolerances and made the slot on the adjuster larger for use with my model. Note that I…
Update: tried in keyboard and did not work since it was too far away from the trackball. New version (v5) should address this issue. but you need to print a remixed version of the adapter_v4_bottom as well! It is still not perfect, but I…
The knob on my Carrier Furnace 58STX045112 cabinet broke so I used my digital calipers and some Fusion 360 know-how to model a new one. I've included the f3d file for you to further optimize if you'd like but it's fully functional and…
GM/Opel 90503110 Knob Trunk Box Right 2336971 Vectra B This is the part that closes the lateral lid, inside the trunk, where tools (Jack, Safety triangle and Lug wrench) are hidden. Could not find a new one to buy, so I designed and…
Wall mount for Home Assistant panel with support to grip directly to an EU electrical box made of either plasterboard or concrete.
A 2x3x4 gridfinity holder for the ChannelLock E336, I printed it in petg 0.6 nozzle
This is a Gridfinity holder for the Milescraft 7336 PocketJig 200XCJ pocket hole kit. Doesn't hold the clamp or any of the consumables, but keeps the kit and bits together and organized. In my photo is my first print which was not quite…
You can find it on HPI Vorza Manual, page #3 https://www.hpiracing.com/assets/documents/instruction_manuals/115870_vol04_vorza_flux_hp_rtr_061015.pdf It took 36 minutes to print on my FDM printer: Printing Speed: 60mm/s Support Type:…
Die Borungen sind etwas knapp bemesser und müssen etwas (0,5mm) aufgebohrt werden
This is an enclosure for the SC3336 camera ( https://s.click.aliexpress.com/e/_c42L6Q2P or on amazon https://amzn.to/4ngrpwI ) that is used with the luckfox pico mini board (https://s.click.aliexpress.com/e/_c33LMcDd or on amazon…
This is a kickplate designed to fit the KidKraft "Large Play Kitchen with Lights & Sounds" (item number 53369), a popular model sold at Costco: https://www.kidkraft.com/ca_en/large-play-kitchen-with-lights-sounds-white.html Once…
This blank plug is designed to seal BS 2.5-inch water supply outlets and protect them from dust, dirt, and contamination . It includes a small hole for attaching a chain or cord , allowing the plug to be secured to the hydrant, vehicle,…
piece 48336 (1x2 plate with a side bar handle) about 2 grams
Profilo Superiore per Analizzatori di Spettro Advantest serie R3361x o simili. Dato che dopo molto tempo si rovinano e si rompono, ne ho disegnato due Modelli . Vanno bene entrambe, logicamente misurando i miei Strumenti quindi se ci sono…
The lid is intended to replace the original when/if it breaks.
ORGANIZZATORE GT336 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
Captain_America_Shield__wearable__3362628
A simple adapter to house a 1/4'' screw inside the tube of the Crivit bike repair stand. Don’t waste money on other tripods
I need to protect the three heads of the laser level during transport because I don’t use its case. The tolerances are intentionally tight to prevent them from coming off too easily. IMPORTANT : Please print only in TPU; any other…
My ATGM336H gps module had a slightly larger antenna, no I had to modify the front part. I have also a big preferences on brass inserts, so I modified that also. A Big thanks to Brian Flores and Alley Cat's
Press fit cover with a generic vent look. Works with the part that attaches to the core one Eric_336328 made.
You need 2 M2 bolts (skirted to be flush) and 2 M2 metal threaded inserts (see the picture). I printed these models on their sides using a Core ONE. This helps the appearance of the slider top. Note that you will need to set the slider…
When dissaseble the light housing i've encoutered that one of the attachment mounts was broken. This meant that the light could not be closed anymore without having a gap or sitting loose on the wall. i've crafted the new mount from the…
Printable replacement for the freezer drawer slide rail clip on Bosch / Thermador / Gaggenau built-in refrigerators. Replaces OEM part 00633652 (supersedes 00604665; also sold as AP5953399 / PS10060851). Fits the T24/T30/T36 built-in…
Die Borungen sind etwas knapp bemesser und müssen etwas (0,5mm) aufgebohrt werden
Marlin 336 30-30 Bore Guide – A practical solution for hassle-free cleaning. Designed to fit snugly into your Marlin 336 30-30, this bore guide simplifies the cleaning process, making it quick and efficient. No more fumbling with…
This is a 6 compartment divider for the Packout Organizer Cup (48-22-8336). Included with this is the STL file for 3D printing in the original configuration. Also has a .f3d file for Fusion 360 if you want to edit and change how the…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…