Comb 3in1
A thin comb for hair and beard 2mm thicknes(0.6 mm minimum), 20.6 cm long, 7cm wide
- Downloads
- 476
- Likes
- 39
- Rating
- 4.6
55 models
A thin comb for hair and beard 2mm thicknes(0.6 mm minimum), 20.6 cm long, 7cm wide
A simple holder to store the 6 Stabilo Woody pens and make them easy accessable for kids.
English Gardena Sprinkler Mount 3in1 This mount is designed for the following Gardena Sprinklers: Classic Polo Comfort Aquazoom AquaZoom M (Other Gardena sprinklers have not been tested yet, but they might fit.) What you need: Broom…
Based on my past design, the Prusa Mini z-axis mount for YI HOME CAMERA : https://www.prusaprinters.org/prints/74970-xiaomi-yi-home-google-nest-camera-mount-prusa-mini I want to upgrade the mount to hold more stuff, which is LED Keychain…
Print with PETG without support. Put 50 euro cent into the hole. (push it in with some tool, only 3mm is out) Open some bottle and drink:) W
🎯 Silicon PRO 3in1 è lo strumento definitivo per ogni amante del fai-da-te e per i professionisti della sigillatura! Con il suo design ergonomico a freccia e le tre punte intercambiabili, questo accessorio rende ogni lavoro di silicone…
Made some changes. The tube now holds filament roll better in place and does not require any supports and screws. The baseplate is upgraded so it's a little smaller and actually saves more space, now standard-size filament spools fit more…
More options and upgrades available soon, free version includes very basic features! Free Version includes: Clean Cooler Grooved with Spout Model Features: Layered STEP files so under the objects tab you can easily color customize without…
Hook for your bag with three position- way to use. 1) Tension on desk board 2) Hook with small diameter (upto 3cm) 3) Hook with big diameter (upto 6cm) Tolerances depend on material you will use, like PETG si more flexible than PLA :)
What can I use it for? Handle for drawer Print the base model and a additional pole in the size you need. Filament Swatch Just print a few of the base models and use them as samples . KeyChain You will also need paracord for this. Print…
3in1 Silicone/Caulk Tool What are the three functions? It includes a scraper to remove the old silicone, as well as two round edges with different diameters, to smooth the new silicone once applied. Three versions There is a Mini, a…
edit: I've added a version 2 which has thicker outer walls and an adjusted cover.
I found myself comfortable using soap bars lately, even solid shampoos, and I thought that it would be better to have a place to put my soaps near my sink and that even my shower organizer wasn’t fit to support them. So I started working…
It takes up little space. The inner diameters are 26 mm, 22 mm, and 18 mm, so that the boilie does not get stuck. You will need an Olfa SKB-2 blade. I printed it as follows: Layer: 0.2 Filament: Bambu Lab PLA Basic With support
This garden light can be used as a floor, wall, or hanging light. It is approximately 40 cm high, making it a full-size fixture. It is prepared for an E27 socket. Please use only LED bulbs (otherwise, excessive heat generation is…
Dieser Spulenhalter ist ein Remix aus drei Modellen. Perfekt für die MMU3 die bald erscheint. Montiert kann dieser an Wand, Decke oder Boden. Gedruckt mit Prusament PETG Matte Black und Prusament PETG Orange. Perimeter 3 Infill 25%…
Rafts: No Supports: No Resolution: 0.2 Walls 6 Infill: 0 PETG, or PLA
Just your basic 3 in 1 Apple products support for iPhone, Watch and Airpods. I wanted a simple, elegant right hand style support with a practical and clean look.
More than a regular ruler! Compass to draw circles/arcs (with the help of a needle) Punch locator to be used with center-punch/pen I recommend activating ironing the topmost surface to get a nicer tool.
Simple part cooler for XCR3D 3in1 S1 (non-mixing) aka BigtreeTech ZSYong 3in1 hotend, attached at the heatsink with existing fan screws, uses 50x15 blower fan. Printed without support.
ITA assemblare il gruppo e fissare alla base con una vite a esagno incassato M4 X 70mm con dado normale M3 annegato dal lato opposto. fremare l'anello in testa senza fermacavi utilizzando 6 brugole M3 X 8mm Con fermacavi aggiungere una…
The model comes with a lot of wapones and are printable with a 3d printer
Pen Organizer For STABILO Woody 3in1 As already mentioned in the short description, I didn't like any of the current models. So I designed two versions myself. One version with space for 7 pens and one with space for 15 pens. The tip…
Update: 18 Nov 2019: Added a 3D Model with my version of bdwalker1's hot end design; https://www.thingiverse.com/thing:1328848 . Components include - E3D Lite6 J-Head, 0.4mm nozzle, collet, collet lock, Capricorn TL and the 3 in 1 PCA to…
To use with armattan frames.. Armattan Badger include 3in1 (gps 18x18/ sma/ T antenna). Print in tpu 20-30 %
i have added the extra parts hotend conversion is complete, i have also added an updated (lighter less intrusive) hotend mount note: will need to cut or desolder un-needed bl-touch and neopixel pins on the hotend board to mount the…
This is an adapter to make the slot behind the gear shifter able to hold all can sizes available on the european market, 50cl, 33cl and 25cl. Fits all BMW 3 series cars made during 2005-2013. This only applies to cars not having the stock…
Could not find a single stand for this vacuum, I've never 3D modeled before but my brother and I were up late putting this thing together while having 0 Fusion360 experience :D . VERY BASIC NEEDS IMPROVEMENT but works. Would love input…
Minimum ring base required to support a naked portafilter with handle perfectly touching on the table. Inner hole doubles as a tamper holder. Every portafilter is slightly diffferent in bottom diameter and handle angle, so its impossible…
I was inspired by hotend holder https://www.thingiverse.com/thing:1703064 But 30x30 fan are weak and can't really cool down the hotend. Moreover the bronze bearing was abused after 10-15 days and I've twice melted holder :( Then I…
REMIX!! OPTIMIZED FOR AUTOMATED PRINTING! I changed the position and length of where the camera would mount. I found that you can use cheap harbor freight screws as tripod screws, so I just bolt my action cam right on it. I liked the…
This project replace the original screen mount with an arm which allow you to mount your raspberry with klipper, a camera connected to the raspberry (I used the Longruner Caméra with IR vision) an finally a place to put tools for 3D…
English: This box is designed for storing Nescafé 3in1 (or 2in1) and fits the contents of an XXL pack (20 sachets). Its simple and elegant design makes makes it a great addition to any kitchen counter, a pantry or kitchen drawer. The…
Malo miesta na stole? Tento stojan ušetrí miesto na stole a to jednoducho. Ak máš nápad ako by som ho mohol vylepšiť, tak mi napíš. Stojan 3 in 1: stojan na RC model držiak SKYRC 200W držiak SKYRC Tire Warmer Odporúčam pre rýchle…
This is a pencil holder with 2 extra parts. the cylinder on the side is to slide something round and the hook is to hang
**Updated and more advanced prints with mixers can be found here https://www.thingiverse.com/thing:3657366 3in1 Color Wheel with 61 Different Colors in single print I created this so I can see the difference in mixing 3 filaments and also…
Baseus 3in1 wireless charger pole stand…
This is a case for the AOK 150W 3in1 discarger. I printed it in ABS because the bulbs get hot. http://bit.ly/3rh6Umn This is a tight fit :) Print Settings Printer: Craftbot Plus Rafts: No Supports: Yes Resolution: 0.2 Infill: 19 Category:…
Nástavce na vysavač ECG VT 4220 3in1
I don't know if this counts as a remix since I designed it from scratch in Fusion360, but I really want to give a big shoutout to hxr's crayon holder which heavily inspired this case here: Mine uses the same principle, pencil goes in, lid…
I was having troubles finding a mount for this hotend. Thinking that I can't be the only one with this issue, I created this mockup of the hotend in question. This is the BigTreeTech ZSYong 3in1out hotend mockup. My thoughts are to use…
Hallo miteinander, Meine Tochter hat die Stifte auf den Tisch gelegt, da diese aber sehr gerne wegrollen und dann immer auf den Boden fliegen dachte ich mir das ein Stiftehalter optimal ist. Die Löcher sind von oben 14mm ganz leicht…
Malo miesta na stole? Tento stojan V.2 ušetrí miesto na stole a to jednoducho. Ak máš nápad ako by som ho mohol vylepšiť, tak mi napíš. Oproti prvej verzií je produkt menší a ma väčšiu plochu na model auta. Stojan 3 in 1: stojan na RC…
Hallo miteinander, Meine Tochter hat die Stifte auf den Tisch gelegt, da diese aber sehr gerne wegrollen und dann immer auf den Boden fliegen dachte ich mir das ein Stiftehalter optimal ist. Die Löcher sind von oben 14mm ganz leicht…
Malo miesta na stole? Tento stojan ušetrí miesto na stole a to jednoducho. Ak máš nápad ako by som ho mohol vylepšiť, tak mi napíš. Stojan 3 in 1: stojan na RC model držiak SKYRC 200W držiak SKYRC Tire Warmer Odporúčam pre rýchle…
This is an adapter to make the slot behind the gear shifter able to hold all can sizes available on the european market, 50cl, 33cl and 25cl. Fits all BMW 3 series cars made during 2005-2013. This only applies to cars not having the stock…
Always have a die with you—without even needing a surface to roll it on. Roll it while walking, in the car, or even while doing a barrel roll in your aircraft. This handheld spinning die is great fun to fidget with and play around. It…
A remix of RJCDesigns16's child safe utensil set. RJCDesigns16 's model received a LOT of criticism around microplastics and stability . Unfortunately, I was not able to improve on those fronts, but this model uses less plastic with the…
More options and upgrades available soon, free version includes very basic features! Free Version includes: Clean Cooler Grooved with Spout Model Features: Layered STEP files so under the objects tab you can easily color customize without…
More options and upgrades available soon, free version includes very basic features! Free Version includes: Clean Cooler Grooved with Spout Model Features: Layered STEP files so under the objects tab you can easily color customize without…
Same 3in1 now with a Pokémon theme! Consider this an addon of the original design but with a theme that includes items to help create your own Pokeball Cooler! AMS/CFS is required for the majority of the print the flat parts can be scaled…
More options and upgrades available soon, free version includes very basic features! Free Version includes: Clean Cooler Grooved with Spout Model Features: Layered STEP files so under the objects tab you can easily color customize without…
Same 3in1 now with a Pride theme! Consider this an addon of the original design but with a theme that includes items to help create your own Pride Cooler! AMS/CFS is required for the majority of the print There are a bunch of files so i…
I needed a quick and easy way to get 15mm between each of the filament holders when hanging them from the shelf above my 3d printer. Can be used for both the original and remix. Printed in esun black PLA+ using MK4 Input Shaper printer…