5cm Mini Origami Elephant
If you like the model, give it a ❤ and download it, thanks- Pokud se vám model líbí, dejte mu ❤ a stáhněte si ho, díky For better results, I recommend adding supports
- Downloads
- 1,748
- Likes
- 429
- Rating
- 5
506 models
If you like the model, give it a ❤ and download it, thanks- Pokud se vám model líbí, dejte mu ❤ a stáhněte si ho, díky For better results, I recommend adding supports
I created it for my dad and thought it might be useful for others. There's a long finger one and a short finger one. Print instructions Change infill→fill angle from 45° (default) to 83° #edited 20231020
I made a 2nd remix of this beautiful Spyro the Dragon full multi material model with way more details (he got more dragon scales on his back) and some corrected anatomy. Besides increasing the details I also sliced him into 2 parts and…
Verry small 5cm mini spiral cone fidget is beautiful :-) perfektní pohyb pro relaxaci a antistress :-) Do you like the model? Like, download and print :-) thanks Líbí se ti model ? Dej like, stáhni a vytiskni :-) díky jde tisknout z PLA i…
Haku (Miyazaki) 🐲 Commercial License Do you want to sell prints of my models? You can purchase commercial licensing by joining the Commercial License in my Patreon .
Swivel wheel. Diameter 5cm, 2cm depth, to use with bolts to fasten. Required hardware (per wheel): 608 bearing 1x (can also use 2x) metal or https://www.printables.com/model/541192-print-in-place-bearings M5x30mm + 2x nuts + 1 washer,…
This enclosure is based upon the Prusa Printer Enclosure V2 – with MMU2S support. https://www.prusaprinters.org/prints/3673-prusa-printer-enclosure-v2-with-mmu2s-support I wanted to have a tall enclosure to be able to keep the spool…
Available in two versions: 15cm / 6in 10cm / 4in Now you can make perfectly parallel lines on your paper, woodwork, etc. In addition to the horizontal distance (15cm/6in or 10cm/4in), I added markers for vertical distance between lines (…
Ein einstellbarer Fuß für Möbel, dieser wird mit 3 Schrauben an dem Möbelstück befestigt und kann dann mit der großen M30 Schraube in der Höhe eingestellt werden. Lässt sich einfach drucken mit PETG oder PLA. Das Innenteil ist 3% kleiner…
DANBY Air conditioner AC 7 Inch adapter/reducer to 5.9Inch (15cm) originally drawn for model DPA120B8WDB-6. Short and long Versions (I prefer the short one). Reducer to 5.9Inch (15cm) drawn because 7 inch ducts seem harder to find on…
Ich habe eine Reliefartige Postkarte bekommen, diese kann demnach nicht in einen standard Bilderrahmen. Also habe ich einen konstruiert. Die Postkarte ist zwischen den beiden Bauteilen vorgeshen. Da meine eine faltbare ist habe ich etwas…
Holder for a 3.5cm standard headphone speaker. Model has two slots for zip ties. Can be used for Xbox 360 sonus mod. Cura indicates model errors, but everything prints fine, I just suck at blender. Supports may be needed on bed only for…
You have to have the gripper attachment.
A simple caddy to hold 200 of these lint free wipes. I use them to clean my build plate between prints, but they are originally used for something to do with fingernail art / painting. This is the link to the eBay listing i used to buy…
👍 Don't forget to Like and Collect it, so you can easily find it later! ⭐ Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this…
Category: Toys & Games
Follow me on Instagram ❤ Facebook ❤ TikTok ❤ Telegram ❤ Patreon ❤ Pinterest ❤ Haku (Miyazaki) 🐲 Commercial License Do you want to sell prints of my models? You can purchase commercial licensing by joining the Commercial License in my…
This is a remix of bias tape maker from https://www.thingiverse.com/thing:3880491 by Oscarko. It is increased by 150% (for 5cm tape), the wings are clipped a bit and the bottom is flattened for better bed adhesion. Print instructions…
👍 Don't forget to Like and Collect it, so you can easily find it later! ⭐ After a successful print, rinse with water for a smoother finish. The Mini Pocket Slide Box (25mm Tall) offers expanded storage while maintaining its compact and…
K/DA exploded into the music scene with their hit song “POP/STARS.” Fans of K/DA can’t get enough of their unconventional flair, from the trademark tails (which fans suspect are real) to otherworldly decor in their studio. “Our songs are…
Metric ruler with steps of 1 mm. Measures up to 15cm. Best print with a layer height of <= 0.1 mm. Print instructions Best print with a layer height of <= 0.1 mm.
Title: 3D Root Watering Spike 15cm - 360° Irrigation System Description: An innovative and effective solution for indoor and outdoor plant care! This 15cm watering spike is designed to deliver water directly to the root zone, preventing…
I could not find a proper scaled lamp shade for the Ikea Fado in the style of the Death star, so i remixed one. Print it in transparent filament. ---- www.jprint.dk Facebook, Instagram, Twitter - @jprintdk Print Settings Printer: BambuLab…
I cant take credit for this, all I did was scale Decibel's awesome stem model on the x and y to fit the 5cm version of Lytta's beautiful spiral vase rose. I left the Z at Decibel's original hight to have a long stem. All credit really…
Another great model uploaded to https://3dwarehouse.sketchup.com/search.html?q=starwars&backendClass=entity as a free download I like this model, but I'm guessing at about 5 - 10 kg's in plastic and 8 months to print. I might just shrink…
Jack-O' Valentine is a major character in the Guilty Gear series. She is one of the three servants of That Man, alongside Raven and I-No. Her past is shrouded in mystery, and her own memories are vague. Because her awakening remains…
Popis Box with handle - outer max dimension 108x125x54mm - inner max dimension 100x100x50mm Video with disassembly: Used screws: no screws needed 3D printing settings Layer 0,1mm for no supports (0,2 with supports - use organic tree 25°)…
This is a tripod. Compact when folded - diameter is 4cm (38mm) and length is 17.5cm, extends to 45cm, manages to hold a smartphone (around 250g) + 1.5kg weight while fully extended (and 3kg+ when not fully extended), though I wouldn't…
This is a scale version of a wind turbine approximately around 1:100 The rotor is connected to the nacelle with a 608 bearing Print all parts once except for blade print this 3 times. Everything should just press together, although…
These raisers are made for the GraviTrax Junior marble tracks to raise the tracks for longer runs
I have revised the model of “morenostefanuto” to be 3D-printable. Need to mention that I am not a “Andromeda Fan” or “Trekki” but this Andromeda Ascendant model is really huge and looks really fantastic. The dimensions are: length: ca. 50…
K/DA exploded into the music scene with their hit song “POP/STARS.” Fans of K/DA can’t get enough of their unconventional flair, from the trademark tails (which fans suspect are real) to otherworldly decor in their studio. “Our songs are…
I extended the 5cm box to make it 6cm, 7cm, 8cm, 9cm, and 10cm, respectively. I didn't change the other dimensions.
Tweezers for aquaristics. Ideal for planting flowers
Malá úprava zakladace. Přidány díry na šrouby s a sražený roh. Jedna verze je pouze s dírami na šrouby. Velikost díry je 2,5mm
Super simple storage box. Why do complicated when you can do simple? They can be snapped together in infinite row. Snap lid. No support, fast print. Hold well ! 1mm thick wall, 5x5x5cm
Seems every rotating thing on Printables needs a stepper motor and a programming degree so I made something that needs just 2 mr128 bearings and the rest can be found in the junk drawer. Wrap the wires around the built-in battery holder…
------------------------------------------------------------------------ List of released EOS rotor designs (subject to be actualized frequently) EOS_01 rotor design → this post (…
Simple set of cookie cutters. In STLs there is a set to be printed, or use the individual sizes as you like. Jednoduchá sada vykrajovátek na cokoli potřebujete. STL je tam jedno velké, s celým setem a potom i jednotlivé velikosti.…
Best for printing and storing.
This model is an Extension with a straight tunnel. It is compatible with the Gravitrax Junior Marble Run. I optimzied this model: https://www.printables.com/model/744471-gravitrax-junior-compatible-tunel I used the tolerances of this…
Metric ruler with steps of 1 mm. Measures up to 15cm. Best print with a layer height of <= 0.1 mm. Print instructions Best print with a layer height of <= 0.1 mm.
These Baseplates fit tightly into the IKEA Malm Drawer - the small one which fits neatly besides your bed. They have a little corner at the side, so the bins will have a little gap left and right (and in the back). The gap is similar on…
These are two rulers perpendicular to each other, also known as a square measure! You can use this 90 degree ruler in many ways, such as drawing or measuring something. Everything is labelled with an extra layer, you can add a filament…
I call it the “eco” version because I tried to design a frame (though visually a solid as the first one) that needs significantly less material to print. Having set infill to 5% you need only 56g of PLA. Furthermore I added mat and back…
Customized version of https://www.thingiverse.com/thing:1902359 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1902359 Instructions Using the following options: RulerLength = 15 Unit = centimeters…
ENG version : Gingerbread House Cookie Cutter as collection 16x17x14cm is not only for X-mas. All models are in 3mf for MK3S+, MINI+ and STL for other FDM. Collection : Front side, Back side, Roof, Side, Floor, Big&Small Window Material :…
75cm high wind-mill model with motor works great as indoor fan with an gear motor I used a maxon 24V gearmotor with Dia22mm and 4mm shaft In my version all printed in PLA without support fits within a 19cm x 19cm print bed (diagonally) (I…
90° adapter for air conditioners. Hose diameter is 15cm . The bottom is flattened to fit my BambuLab printer and print faster. Have to the original in terms of wind speed only 0.2m/s loss (original 9.6m/s - 90° adapter 9.4m/s). Please…
Stem for 5cm Spiral Vase Rose with bottom by lytta. It has three different parts: “Leaves”, “Receptacle”, and “Stem”. Printing I printed all of the parts with 3 walls, 3 tops and 3 bottoms using lightning infill. I used a heat gun (a hair…
Designed in Fusion 360, simple flower pot with spiral decoration. Drainage hole in the bottom. Fitting saucer. Does not leak from sides. I have designed more sizes - diameters 10, 12 and 15cm. Also available 12cm without hole Print with…
Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.
"Winter is coming" 0.1mm - layer 3 filament changes Category: Signs & Logos
15 cm ruler, with goniometer for the main angles and circle meter from 1 to 10 mm
Jack-O' Valentine is a major character in the Guilty Gear series. She is one of the three servants of That Man, alongside Raven and I-No. Her past is shrouded in mystery, and her own memories are vague. Because her awakening remains…
První model co jsem zkusil. Chyběla miska pod květináč, tak tady je :) Ale hodit se může na cokoliv. Základna průměr 14 cm, vnitřní průměr 13,5 cm My first model, bowl under the flowerpot. Base 14 cm, inner diameter 13,5 cm. Enjoy
Changed the size a bit. The llama's chin messed up a little on mine, but some flush cutters and some careful sanding solved the problem. Infill 30-40% -> you could probably use less. I went with more just in case. Supports definitely…
Daenerys Stormborn of the House Targaryen, First of Her Name, the Unburnt, Queen of Mereen, Queen of the Andals and the Rhoynar and the First Men, Khaleesi of the Great Grass Sea, Breaker of Chains, and Mother of Dragons 0.1mm - layer 3…
This is a simple weaving shuttle I made for my girlfriend. It's easy to print in PLA. I printed it with 100% infill just to be sure but I don't think it's necessary. I also made a Backstrap Weaving Loom , have a look!
Stackable Epoxy Resin Mixing TRAY Glue Filler 40x50mm
exactly what title said
Rounded 5cm star bead with 5mm hole. Designed in Illustrator and TinkerCAD. Category: Accessories Note: This design is re-published from Thingiverse and was originally uploaded on Feb 1, 2019.
Eine Nachbbildung des Windrades Nordex N175/6.x und der Windturbine Vestas V172 - 7.2 in ungefähren Maßstab 1:500. Es handelt sich um eine stark vereinfachte Abbildung. Die Nabe der Windkraftanlage ist ca. 25cm hoch. Die Bauteile können…
2.5cm (0.98 inches) The sizes are approximately! Do you need other sizes? Contact us! Please give us a ❤ if you liked the model, so we'll continue uploading interesting .STL! Ask us for custom designs! We are located in Buenos Aires,…
This is a heddle / backstrap weaving loom (not sure of the actual name in English) I made for my girlfriend. It fits the build plate of a BambuLab X1C, P1S and P1S perfectly. Required parts and material: 1x loom_hears.stl 2x handle.stl 2x…
Can be used at the beach as a shovel or other situations that only require a spoonful
Use 11pcs M5x12 screws with nuts.
Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.
My wife asked me for a little trash can for her desk to collect scraps from cross-stitching and model-making. Overall dimensions: Height: 11.4cm(4.5in) without lid, 15.4cm(6in) with lid. Diameter: 10cm(4in) at top, 7.6cm(3in) at base.…
The space I have for my printer is very low, and I needed something that would lower the filament spool even more without touching the belt. I did this remix with that purpose. I used the same settings as the original: 15% infill, gyroid…
Simple flyer stand. It is printed without supports.
The original model did not support the weight of my phone and even though it was super tight it still slipped.
Didn't post any models for quite some time now … but they are still piling up :) … I want to continue sharing them … I am not sure there are other robot enthusiasts out there like me … but if you are … more models will come up soon. This…
Super Mario Brothers themed star bead with 5mm hole. Single color. Measures 52mm x 49.5mm x 12mm. Print Notes Printed in Paramount3D Simpson Yellow, For best results, print face down, no supports. Category: Jewelry
you can print without model support
You can place 4 large tape rolls, width up to 5cm, diameter up to 15cm
More large robot prints are comming up :) …. This specifc robot is based on an 70ies SciFi movie “The Black Hole”. Those robots were the sentries of the space ship the movie is mainly playing on. Since it has not been designed by me (I am…
Warhammer Citadel Paint Stand Was asked by my brother to create a stand for his Warhammer paints. His Instagram Page - https://www.instagram.com/theforgotten3rd/ 40 Paints can be stored in each stand. Sixteen of which are instantly…
------------------------------------------------------------------------ List of released EOS rotor designs (subject to be actualized frequently) EOS_01 rotor design →…
Print 2 and glue it together I would be very happy about a Make, Like or Share! Happy printing!
Photo frame. Inside you can fit a 10x15 cm photo. Category: Art
This is a European standard slide tray in different sizes (one roll of 35mm film can give up to 42 images if you load your camera right). This design works perfectly with Leitz (Leica) line of Pradovit projectors. If you want a tray of…
⚠WARNINGS ⚠ THIS IS NOT A CERTIFIED HEMA SPARRING BUCKLER. IT IS TO BE USED AS A RIGID PROP TO STUDY FORMS BY YOURSELF ALONE NOT AGAINST AN OPPONENT! I AM NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY IF USED AGAINST AN OPPONENT! Hello, I…
Gedruckt in ASA von Filamentum passend für Golf1 und Cabrio für Lautsprecher 16,5 cm
------------------------------------------------------------------------ List of released EOS rotor designs (subject to be actualized frequently) EOS_01 rotor design (…
Expandable photo frame for your memories. You can (but dont need to) add a cheap (0.99€) glass in 10x15cm for best results. Best wishes
A buckle for 5cm or 2" wide nylon webbing straps. Easy adjustable but with a firm grip on the straps. It is made so it can easily rotate to a certain degree. No supports needed.
DEUTSCH Ein funktionales 15cm Rohr für das Quadro-System. Wenn der Drucker gut kalibriert ist, passt das schön und gut fest in die Kupplungen. ACHTUNG! WICHTIG! Das selbst gedruckte Teil hat keinen Anspruch auf die gleiche Festigkeit wie…
The screw holes are intended to be used with the SSD screws that come with Ridge. This way you can screw it at any point you have ventilation holes.
UPDATED 18 MAY 2025 After using this for a week away I decided to add a Lid to enable easier access to one days pills. A simple 7 compartment insert for the excellent 7cm x 5cm Container Pod by Squinn, now with Rotating Access Lid,…
Ein Trenner für den Ikea Ordning Besteckständer mit 13,5cm Höhe in 3 Ausführungen. Unterteilung in 2, 3 oder 4 Fächer. Inspiriert wurde ich durch: https://www.printables.com/de/model/10226-divider-for-ikea-ordning-utensils-holder Ich habe…
I needed the 5mm size one with just a *little* more height so I threw it in TinkerCAD and cut it up so I could add 3 mm with out affecting the geometry of the bottom or the lid slide part. Everything else is identical to the original.
A minimalistic picture frame. Print it, glue it to a wall, keep the open space orientated upward. Insert picture. Done!
I found a nice video on YT about a polycarbonate panel with a drilled hole for any 15 cm air exhaust. The missing thing were the parts to connect the hose with the panel. So there they are, modeled from scratch. I used the sliding…
New Wall Holder: https://www.printables.com/model/1054010-running-wheel-wall-holder ********** English ********** A smooth and very stable wheel with a diameter of 25cm. Suitable for hamsters, mice, rats and the like. Still working on…
Easy Print Sticker Roll Holder :) Printed with PLA 0.2 layer height :)
Flat and long vacuum nozzle. Dimensions: 35mm hose (doesn't need to be perfectly 35mm) 10.5x35mm nozzle, so flat short: one part only: ~25cm long: two parts connected: ~46cm Print options: printed from PETG seam position: random (I like…
3D model of a Viking axe adorned with intricate ornaments, showcasing a blend of historical and artistic detail