Search results: 630

Sort order

166 models

P
Printablesshoyler

Sony a6300 Grip Extension with AirTag Slot

A simple Sony a6300 extension grip with a place to hide an Air Tag. I recommend printing with base-plate supports, especially for the camera screw slot. This was modeled after my remixed a6600 camera extension grip, which was modeled…

Print approx. €1.25–€1.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
13
Likes
1
Rating
0
P
Printablesfrederikf

100+ Ball bearings in standard sizes (608, 6200, 6202, 6204, 6206, 6000 and 6305 etc.) - uses airsoft 6mm bb balls or 4.5mm steel balls

UPDATED: Slightly larger tolerance (0.1mm diameter for the bearing balls). Choose random seams if you printer is not well-calibrated. I recently needed a slimmer ball bearing for a spinner project, so I did my own take on ball bearings to…

Downloads
1,414
Likes
129
Rating
4.83
P
Printablesch1a

Vornado 630 Replacement Fan Blade

The blade length and hub measurements match the original, but I sort of eyeballed the angles of the fins. The hub fits snug, but should press on fine. I've been running this for a year in my shop and I can't tell a difference between the…

Downloads
1,077
Likes
42
Rating
5
P

Twilight Imperium Wormhole Tokens [thing:4866300 remix]

A highly visible (and in my opinion, super cool) set of wormhole tokens for use in Twilight Imperium 4th Edition. This is a multi-color remix of the wormhole gate tokens for Twilight Imperium 4 by Vypper on Thingiverse. Just set a color…

Downloads
603
Likes
48
Rating
4.75
P
Printablesmaxelman

Better bit holders for Milwaukee 48-89-4630 / Shockwave Case

The default holders for this set aren’t very good, so I made new ones You can also stack all the bits on one side, which leaves room for other bits on the right. I also included a version with the ½" bit holder in place of one of the 1/8"…

Downloads
563
Likes
212
Rating
5
P
PrintablesL0ran

Bosch Mum5 rotator - Bosch pt. nr. 00630760

I printed it with 50% infill, brim and supports addded to: The bottom face of the wings (not the inclined ones) The base circle The center square which is a bit above the ground the small gaps on the driver pins sticking out downside The…

Downloads
498
Likes
43
Rating
3
P
Printablesthall72
Downloads
423
Likes
45
Rating
0
P
Printablesfelixna

HP Thin Client T630 Stand

I bought a used HP Thin Client T630 where the stand was missing. Since the stand is important for the passive ventilation, I designed this one myself. As with the original stand, it can be mounted for horizontal or vertical position. It…

Downloads
406
Likes
22
Rating
5
P
PrintablesChase Adkins

Skil Table Saw TS6307-00 Miter Bar

This is a 300mm miter bar that fits the Skil TS6037-00 table saw. It has 5 holes in the top that I used for heat set inserts for an M5 bolt, but the Fusion file is available if you would like to do something different.

Downloads
372
Likes
42
Rating
0
P
Printablesthall72

Lego Compatible (46304.dat) Minifig Helmet Snow Goggles

This model is compatible with the lego system.

Downloads
352
Likes
54
Rating
0
P
Printablesmakes_stuff

Smallrig Ergonomic Grip for Sony a6000/a6300/a6400

THIS DOES NOT FIT THE A6500 due to the larger grip. This is a sculpted handle for the Smallrig a6500 cage (fits a6000, a6300, a6400) that fits 3 fingers and allows your index finger to comfortably manipulate the power, shutter, and C1…

Downloads
339
Likes
61
Rating
4
P
PrintablesAlpha

3M Exhale adaptor for Filter capsule (Fit 6100 6200 6300 only)

This is the exhale Adaptor that's design to fit with all my other filter capsule. It is designed to filter out the air you breath out, just incase if you got sick and this will prevent the virus from spreading. Print instructions Print…

Downloads
272
Likes
24
Rating
5
P
PrintablesGiovanni1954

ORGANIZZATORE GT630

ORGANIZZATORE GT630 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Combo Anycubic Kobra S1 Laser: Mecpow X3Pro 10W

Downloads
263
Likes
92
Rating
0
P
PrintablesW0mba

NEJE N40630 (30W) Laser Air Assist (.stl & .step)

This model is a drop-in replacement for the laser module's tinted acrylic window and slides directly over the laser's focusing lens. To achieve an airtight fit around the focusing lens, it is recommended to apply a few turns of Teflon…

Downloads
231
Likes
18
Rating
5
P
Printablesömer demir

Airbrush cleaning pot from 630g Nuttela jar

I printed mine with slim tree supports and it came out perfect. If my work inspired you, a coffee would make my day. https://buymeacoffee.com/odemir

Downloads
226
Likes
42
Rating
3
P
Printablesfranc12

Model train BB63000 N scale

Model train of BB63000 N scale used on French railways SNCF No engine installed Using boggies N scale found on amazon or internet. Bogies found on : https://www.amazon.fr/dp/B08RRXR8CY/ref=pe_27091421_487052621_TE_item Uses PLA, except…

Downloads
216
Likes
36
Rating
0
P
PrintablesAlexus

Caddy for Dell R610/630

A 3d model caddy suitable for 2.5" HDD/SSD. Perks: compatible with Dell servers R610/630 (perhaps others too); the caddy can be easily plugged in and pulled out; has a little space for marker numbering or to put a sticker on it; allows to…

Downloads
213
Likes
18
Rating
5
P
PrintablesOllie

Smallrig Ergonomic Grip for Sony a6000/a6100/a6300/a6400

Simplified model of a remix. Reduced file size by 125x. The original STL is 250 mb, and the new STL is 1734kb. Also included a 3mf file. I made mine with a resin printer (Elegoo Mars 3 Pro) using Elegoo's ABS Like resin Originally found…

Downloads
211
Likes
35
Rating
5
P
PrintablesBrianne

PiKVM Zero 2W Case (Geekworm X630)

Assuming you're using the same (Geekworm X630) HDMI-CSI bridge (…

Downloads
202
Likes
21
Rating
0
P
PrintablesCodecat

SONY A6000 Series | Thumb Grip with Support Handle | a6000 a6100 a6300 a6400 a6500 a6600

a6700 Users - The Grip does not fit because of the reworked mode-switcher, use the following remix by @shoyler_79369 (UNTESTED) : Extended Grip Printing instructions: Use supports when printing the model, otherwise you will not be able to…

Downloads
195
Likes
21
Rating
5
P
PrintablesPavel Petrman

Makeshift inhale and exhale filters for 3M 6000 face mask (3M 6300, 3M 6900)

If you need dust protection (about P1) or an exhale filter (as per authority requirement) just print these out and attach any membrane material you have at hand, fasten with a wire and you are ready to go. Made for a friend of mine who…

Downloads
192
Likes
20
Rating
3.5
P
PrintablesMartin Krupa

Slavia 630, 631, 634 FrontSight

Ověřený tisk PET-G, vrstva 0,2 mm s 2 perimetry. Doporučuji postavit na podložku přední částí - otvorem pro střelu z hlavně. Podpěry nutné. Použil jsem organické.

Downloads
188
Likes
6
Rating
5
P
PrintablesJeanLucPicard

Markisenklammer angepasst für Thule Omnistor 6300

The Thule Omnistor 6300 has a keder rail comparable in dimensions to the one in @Ezernal awning just on the internal side of the shade and neither his variant A nor B fit well. The concept of version B was maintained however the top was…

Downloads
169
Likes
16
Rating
0
P
PrintablesNat

Traxxas LaTrax Front/Rear Suspension Arm 7630 (TRA7630)

This thing breaks all the time and I got tired of buying replacements, so I modeled this. It works fine, still breaks like the original. spoiler: I purchased metal ones because I got tired of printing replacements.

Downloads
163
Likes
25
Rating
0
P
Printablesthall72

Lego Compatible (56630.dat) Minifig Cape Cloth Scalloped 5 Points

This model is compatible with the lego system.

Downloads
162
Likes
27
Rating
0
P
PrintablesPeterV

Marantz 6300 Tonearm Clamp

I would recommend printing with PETG at 0.15 layer height or less to achieve smoother surface. Part snaps in place.

Downloads
159
Likes
9
Rating
0
P
PrintablesParagon

Podstawka - HP T630 Thin Client

Podstawka do miniPC, HP T630 Thin Client. - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam: https://www.magazynowanie-energii.com - Lista wszystkich urządzeń, które posiadam Zapraszam…

Downloads
153
Likes
12
Rating
0
P
Printablesstikyworld

Silencer for Slavia 630

Air rifle silencer for SLAVIA 630.

Downloads
152
Likes
15
Rating
0
P
Printables3D.Labs

Neje N40630 Air assist

Air assist option for the NEJE N40630 laser with access to focus wheel. fits 5mmOD 2.5mm ID air assist tubing (tubing has air tight fit around inlet so no glue required) this was inspired by a few creators models but did not suit my needs…

Downloads
138
Likes
7
Rating
0
P
Printablestr0y

Camlock vacuum adapter for Skil 1340AA/TS6307 Table Saw

Adapter to convert the Skil 1340AA Table Saw dust extraction port to camlock. I think 1340AA is the European version of the Skil 15 amp 10 inch saw (TS6307), no idea if it will fit but they look the same. For use with Peter H's Camlock…

Downloads
137
Likes
26
Rating
0
P
PrintablesTomáš Filka

Kuličkové Ložisko - ČSN 02 4630

CZ: Model ke stažení v STEP Jedná se o model ložiska Model ložiska je pouze designová záležitost , není ověřeno jestli půjde model vytisknout!…

Downloads
128
Likes
5
Rating
0
P
PrintablesTwotone74

Halter Kassettenseite für Thule Spannstange G2 (Omnistor 6300/6200)

Ich habe mir bei Obelink eine zweite Spannstange für die Markise geholt. Beim Original (das weiße Teil rechts auf dem Bild) von Thule war der passende Halter für die Befestigung der Stange auf der Kassettenseite dabei, bei der Stange von…

Downloads
127
Likes
15
Rating
0
P
Printablesfranc12

BB63000 loco Truck N scale

This is a modell for a “pusher” train for the BB63000. It necessitates a Kato N gauge motor. Scale 1/160 , N multi part model, made of 3 colours. Original drawings made with Designspark mechanical, avail on request. The parts are 10x…

Downloads
111
Likes
12
Rating
0
P
Printablesdalias

Filament drying adapter for Presto Dehydro food dehydrator 06300

Use your Presto food dehydrator as a filament dryer, without any destructive changes that would interfere with using it for its original designed purpose. Concept inspired by thing #4856292 , but redesigned from scratch. I really liked…

Downloads
105
Likes
9
Rating
2
P
PrintablesAapjes94

Guide rail adapter for Makita DHS630

Alternative base for the Makita DHS630 by TJDesign's “Guide rail adapter for Makita DSS501” The CAD-file is fully parametric, so if you need this for a different saw feel free to reach out with the dimensions and I will make a new version.

Downloads
97
Likes
6
Rating
0
P
Printablesstikyworld

Laser holder for SLAVIA 630 Air Rifle

Simple laser pointer holder for Slavia Air Rifle.

Downloads
93
Likes
14
Rating
0
P
Printablesthall72
Downloads
92
Likes
12
Rating
0
P
PrintablesStarwhooper

Govee Immersion Camera on LG 65UJ6309

Design to put your Govee Immersion Camera on the Top of the LG 65UJ6309 Category: Video Games

Downloads
92
Likes
9
Rating
0
P
PrintablesSerge Nader

Philips QP2630 OneBlade stand organizer

Openings in the base are for easy cleaning and drying. On this page, you have access to two design files. One with straight outlines and the other with curved ones. For the second Philips trimmer stand, please check this link:…

Downloads
90
Likes
20
Rating
5
P
PrintablesChristophe_C

Logo Pioneer SA-6300

Logo “SA-6300” utilisé pour personnaliser la mise en rack 19 pouce d'un amplificateur vintage Pioneer. PLA ou PLA+ Buse 0.4mm, hauteur de couche 0.2mm, remplissage 15% Changement de couleur prévu à 1.2mm “SA-6300” logo used to personalize…

Downloads
89
Likes
5
Rating
0
P
PrintablesRjl

Projector Stand for Ceiling Picture (Made for Vankyo v630w primarily)

Very easy print and assembly. Stand bolts into the projector with two M4 bolts and bolts together with four M4 socketed cap screws and nuts. does not cover any fans or ports, made for Vankyo v630w. I found that even though the manual says…

Downloads
87
Likes
8
Rating
0
P
PrintablesPierre Banwarth

Pfaff Ambition 620/630 box

Little print usefull for the sewing girlfriend ! with space for sewing foots. Category: Tool Holders & Boxes

Downloads
77
Likes
8
Rating
5
P
PrintablesScratcher's Guy

Sash Lift - Andersen Narroline Double Hung 1630409

If you have old Andersen windows and the sash lift in the bottom pane broke, here's a model for your replacement. It has a good fit - not perfect, but I was happy. I tried to replicate the original as close as I could. Printed it with…

Downloads
73
Likes
0
Rating
0
P
PrintablesRussellCage

Skil Table Saw (TS6307) tool holder

There's storage for everything on the table saw, but for the allen key/screwdriver. Not anymore! It fits on multiple places on the legs. Print in PETG for it's flexibility.

Downloads
70
Likes
13
Rating
0
P
PrintablesJOGIAREA

Standfuß HP Thin Client T630 / Stand HP Thin Client T630

Der Fuß passt an einen HP ThinClient T630 und kann mit zwei M2 Schrauben von unten zusätzlich fixiert werden Zusätzlich kann der Fuß auf dem Regal festgeschraubt werden, muss aber nicht. The base fits an HP ThinClient T630 and can be…

Downloads
70
Likes
2
Rating
5
P
Printablesshoyler

Sony a6000 Series Thumb Grip with Support Handle EXTENDED | a6000 a6100 a6300 a6400 a6500 a6600 a6700

Extended version of a hot shoe grip for a6000 series cameras. This allows for some access to mode knob while not interfering with the standard Sony eye piece cover. Pictures show how the model fits on an a6600 and an a6300.

Downloads
69
Likes
6
Rating
0
P
PrintablesKajasX

lučík Slavia 630

Lučík pro vzduchovku Slavia 630. Jedná se o alternativu k originálnímu lučíku, pokud dojde ke ztrátě nebo poškození originálního lučíku. Upevnění pomocí dvou šroubů M5 s imbusovou hlavou - nutno dokoupit. Pro přední šroub je třeba do…

Downloads
67
Likes
11
Rating
0
P
PrintablesDougS2K

Skil Table Saw Zero Clearance Thoat Plate for TS6307 Remix

Remixed this from https://www.thingiverse.com/thing:6122834 to split the plate more evenly so it can be printed on an Ender 3 V2 Neo. Also adjusted the length by 2mm as original was noted to be 2mm short. Print Settings Printer Brand:…

Downloads
66
Likes
7
Rating
3
P
PrintablesMagnusT

Air Assist NEJE N40630 Laser

Using a larger fan (20x25mm outlet) and a 3D printed air cone dimensioned to suit the fan's flow and pressure capacity (air guide and outlet not being too narrow nor too wide) you get a good strong airflow. Category: DIY

Downloads
65
Likes
9
Rating
0
P
PrintablesFejszi

Dell Latitude D620/630 HDD Cover

I made this simple HDD cover for the Dell Latitude D620/D630 notebook because I couldn't find an existing STL for it. No Extra hardware needed Print Settings: Material: Anything works from the cheapest PLA to the most expensive PEEK Print…

Downloads
65
Likes
3
Rating
0
P
PrintablesLuccus

Wiznet EVB-Pico2 Case (W6300, W6100, W5500, W5100S)

This is a small case for the Wiznet EVB-Pico2 boards. It provides easy access to the two buttons but covers the LEDs (I printed it using transparent PETG). The pin headers are also covered, though there is some space above and below the…

Downloads
63
Likes
2
Rating
0
P
PrintablesRisky Rick

3M Half Facepiece Reusable Respirator 6300 Wall Hanger

I designed this to hang my respirator on to the wall when not in use. I didn't really see anything I liked when searching for one. Simple but effective Print Settings Printer Brand: Creality Printer: Ender-3 S1 Rafts: No Supports: No…

Downloads
55
Likes
9
Rating
5
P
Printableslouisblevine

Seiko 6309 Dial Spacer

This was a many-variant project that required a lot of tweaking, and I'm still not sure if I got it right. If you run into issues, let me know and I can try to adjust. Print with the smallest nozzle and finest resolution you can have. I…

Downloads
53
Likes
3
Rating
0
P
PrintablesYvrogne

LEGO Batmobile mini Tumbler (76303) wall mount with stand

Wall mount for Lego Batmobile mini Tumbler (76303) no support needed chose the Wall Mount file with the direction of the car fix with double tape

Downloads
52
Likes
12
Rating
0

Door mirror trim cover - Volvo 240 1204630, 1204631

Door mirror covers for late model Volvo 140,160 and early model 240. They are modeled after my best effort in Fusion 360, Im new to CAD so they are not totally 1:1 so feel free to remix and improve if you want to. They dont feature the…

Downloads
48
Likes
5
Rating
0
P
PrintablesHugo

Housing for relayboard 2ph63083a

This is a housing for a relay-board 2ph63083a. Category: DIY

Downloads
48
Likes
2
Rating
0
P
PrintablesTheGooNie

Philips Avent SCD620 / SCD630 camera holder clamp 30mm & 40mm (remix)

This is a remix of the camera holder clamp only, to fit better in places up to 30mm wide (the original is only about 26mm wide). For the other parts, please use one of the original or remixed sources:…

Downloads
42
Likes
9
Rating
0
P
Printablesmakho

Duratrax Battery Strap & ESC Mount Evader EXT2 (DTXC6305 Replacement)

This is a replacement for the battery strap and ESC mount of the Evader EXT2. The ESC mount will work with all Evader chassis, including the ST, ST Pro, EXT, etc but the strap will only work on an EXT2 or any other Evader that is already…

Downloads
38
Likes
2
Rating
0
P
PrintablesKranzCollective

V-Block with 6301 Bearings

Small set of roller v-blocks I personally use for checking pipe for runout (note that my tolerances are pretty large, so a 3d printed block is fine for my use). Included a small bracket with mounting holes that the blocks fit in for…

Downloads
38
Likes
6
Rating
0
P
PrintablesEmma_Just_Go

USB C Sony Minidisc Player Dock (MZ-E630 and other nickel gumstick models)

This is a homemade USBC charging dock for a Sony MZ-E630 MD Player, also compatible with similar models that use a rechargeable NiMH gumstick battery and have a similar charging port. The dock may need to be modified to fit bulkier models…

Downloads
38
Likes
4
Rating
0
P
PrintablesTomáš Vávra

Clatronic - KM 3630

Lever for raising the arm of the device.

Downloads
37
Likes
2
Rating
0

LG MDT63027201 Gear

Recambio de engranaje de nevera de marca LG para el dispensador de hielo. https://lgparts.com/products/mdt63027201

Downloads
36
Likes
3
Rating
0
P
Printablesdaimhinm

TRAXXAS 7630 Suspension Arm - FDM Optimized

TRAXXIS 7630 Suspension Arm revised to be easily printable on an FDM printer. Use your slicer to mirror as needed. Mirroring is only needed for visual preference. An Index drill set will be useful to cleanout the printed bores.

Downloads
34
Likes
9
Rating
0
P
PrintablesLBENEGAS

SKIL 1340 TABLE SAW (6307) alignment device

I am not a 3D expert, nor a carpenter. I am giving it a try. Just made this alignment device. you can install one of those DIALs to check the BLADE ALIGNMENT. Hope it is useful (it was to me). I printer in PLA (sunlu). Using 25% infill. 3…

Downloads
33
Likes
4
Rating
0

Fishrambit Keychain for 6308 bearing

Fish themed keyrambit! It fits 6308 bearing :)

Downloads
32
Likes
0
Rating
0
P
PrintablesNC Fabrikation

FAUX-PRO 16300 Crankshaft Repair Sleeve Tool

This is a 3D-printable version of the FEL-PRO 16300 crankshaft sleeve installation tool. Used to install the FEL-PRO 16250 crankshaft rear main seal sleeve on engines like the legendary pushrod 5.0L Ford V8 (among others). The center is…

Downloads
31
Likes
1
Rating
0
P
PrintablesTony.252

Airgun Slavia 630 frontsight

Here you have two types of front sights for the Slavia 630 airgun. The first type is a standard open sight. The second type is designed to accommodate a 3 mm fiber optic rod insert. This second type is also provided in .f3d format for…

Downloads
30
Likes
2
Rating
0
P
Printablesteddy3D

short coupling kinematics for Roco 46630

Sparepart for Roco-Car-Wagon Part-Nr.: 46330. Printer-Settings: Layerhight: 0,1mm Nozzle: 0.25mm Supports: Yes Use PCCF for best durability.

Downloads
29
Likes
1
Rating
0
P
PrintablesMelkin

UGREEN CM630 Capture card holder

Made smol holder for my UGREEN CM630 4K USB capture card. Adhesive mounted. You have a choice of 2 options: V1 - less material but small adhesion area. V2 - needs more material but have larger adhesion area plus 3mm mounting holes if you…

Downloads
29
Likes
3
Rating
0
P
PrintablesMatt

Robomow RS630 Wheel

I designed a combo 3D printed/CNC machined wheel for my Robomow RS630 when the plastic gear stripped in mine. I only have a Prusa Mini so I could not print an entire wheel but I do have a CNC router so I printed the center hub with the…

Downloads
28
Likes
3
Rating
0
P
PrintablesRaymondKelly

Philips shaver HC5630 or any other diameter 46mm holder

Easy to fit in. Maybe also useable for your shaver Have Fun, don´t hesitate to give a like or post a make picture. Open for any improvement ideas.- just send me a message. Category: Bathroom

Downloads
26
Likes
3
Rating
0
P
PrintablesREMLURELMI

Mechanical Safe Lock Holder - fits Sargent & Greenleaf 6630, 6631, 6651 - with storage slot for change key

Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default as modeled Brim: Optional

Downloads
26
Likes
5
Rating
0
P
Printablesmartin_pihrt

Steyr 6300 Terrus CVT - rearview mirror electronics cover

The photo shows the original cover and a copy together with the tractor :-)

Downloads
26
Likes
4
Rating
0
P

Air Assist Neje N40630 terminal

I printed and tried various air assists for my laser engraver but I found most of them too bulky so I chose the solution proposed by Tine Sedej ( https://www.thingiverse.com/tintek/designs ). To the laser anchored support (…

Downloads
25
Likes
0
Rating
0
P
PrintablesTigger

Adflo Battery Charging Station for 3M Adflo 837630

Adflo Battery Charging Station for M3 Adflo 837630 Insert Charging Cable in the Grove. Use 4 M3x20mm screws to connect the two parts of one Charging Station. Use 4 more screws to attatch a second Charging Station to the first one. Insert…

Downloads
24
Likes
2
Rating
0
P
PrintablesAndré

Dell Server Tower T330 T340 T420 T430 T440 T620 T630 T640 Foot mount

You may need to snip off two of the 2mm pins on top, depending on the mounting direction. This is the most likely part to break when moving the server.

Downloads
24
Likes
2
Rating
0
P
PrintablesJiří Mlejnek

Roomba 630 Handle / Rukojeť pro Roomba 630

Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 60% Filament: Devil Design ABS Aluminium Category: Parts

Downloads
24
Likes
0
Rating
0
P
PrintablesYoungYirka

B&D GK1630 oil cap

Oil cap for Black and Decker GK1630. Just add some rubber sealing on the bottom and you are good to go. My printing setting: Layers - 0,2mm QUALITY Filling ~30% No support needed

Downloads
24
Likes
0
Rating
0
P
PrintablesVolker-Volkach

Bracket / Holder for FL-11629 / FL-11630/40 Coils.. Spulenhalterungen für Flipper Pinball

English: As I am currently building a pinball machine, I needed appropriate holders for the dual coils, e.g. for Williams/Bally FL-11630, FL-11629 . I couldn't find any here, so I quickly constructed some. I won't install them until…

Downloads
23
Likes
4
Rating
0
P
PrintablesBrodes_9

Gopro Hero 7 Mount For Diatone 2018 GT R630

Designed for StatementPatient7816 to fit their Hero 7.

Downloads
23
Likes
0
Rating
0
P

Neje N40630 Spacer

Neje N4063 laser spacer from the base to be cut or engraved Print Settings Printer: Artillery Hornet Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 20 Infill: 20% Filament: xxx PLA xxx Category: 3D Printer Accessories

Downloads
23
Likes
0
Rating
0
P
PrintablesEuphoricPenguin

Replacement Whirlpool/Kenmore Lid Lock Bezel for W11237157, W10854524, W10630254, and W11187057

I used measurements from a damaged OEM part to create this printable version. I iterated through a few printed versions until I got one that worked well enough for my purposes. It's a bit finicky in that you can crack the screw posts if…

Downloads
22
Likes
2
Rating
0
P
PrintablesChristoph Caina

Wall-Mount for Proxxon Screwdriver Set 22630 (VDE)

This is the first version of my Wall-Mount for Proxxon Industrial Screwdriver Set 22630 (VDE). This set contains 6 single-piece holders for the VDE Screwdriver Set 22630 from Proxxon Industrial. 1x PH 2 1x PH 1 1x 6.5 1x 5.5 1x 4.0 1x 2.5…

Downloads
22
Likes
4
Rating
0
P
Printablesmarallo

RFID RDM6300 module holder

Simple holder for RDM6300 RFID 125kHz reader module. It contains 3 parts, made of a 5 mm thick mat, and two holders. It is screwed with two M3 screws. There is an opening for a pin connector in the pad. I printed from green PLA, the…

Downloads
22
Likes
1
Rating
0
P
PrintablesJason111

GE Dishwasher Silverware Basket Repair inserts gdf630psm3ss

This is for a GE dishwasher model number gdf630psm3ss silverware basket model number WD28X24476 AFTER A TEST RUN PETG IS STILL TOO SOFT AT THE DISHWASHER TEMPS. NEED TO USE A HIGH TEMP MATERIAL WITH HEAT RESISTANCE. I WILL BE PRINTING IN…

Downloads
21
Likes
3
Rating
0
P
PrintablesJC0Bcz

Držák na sklo digestoře MORA OP 630 W

Držák na sklo digestoře MORA OP 630 W

Downloads
21
Likes
1
Rating
0
P
PrintablesGerWa61

Matador 630 Konstruktionsbaukasten Miniaturpiano-Spielwerk

Ersatzteillager im Aufbau für altes Holzspielzeug zum selber drucken

Downloads
21
Likes
2
Rating
0
P
Printablesmkronmiller

Jumbo Funnel 16307

CAD Copy of the Jumbo Funnel Part Number 16307

Downloads
21
Likes
4
Rating
0
P
PrintablesFejszi

Dell D620/D630 RAM DOOR REPLACEMENT

Key features: .step files are provided: easy to modify and remix Perfect fitment: fits just like the original Printing: Material: basically anything works, from the cheapest PLA , to the most expensive PEEK Print settings: 0.3mm Layer…

Downloads
21
Likes
1
Rating
0
P
PrintablesStarwhooper

OpenSCAD - LG 65UJ6309 Frame Shape

I recreate https://www.printables.com/de/model/258932-govee-immersion-camera-on-lg-65uj6309 complete new in OpenSCAD to create sockets für any small things that i could put on top of my TV

Downloads
20
Likes
2
Rating
0
P
PrintablesShinsBlownOff

Geekworm X630 Case

I needed a case for my x630 circuit board in my Pi-KVM project so I made one in fusion 360 :)

Downloads
20
Likes
1
Rating
0
P
Printableskirby

Protectli VP6630 2U Rackmount Adapter

NOTE: I apologize for the print quality in the pictures above. It's awful. I'm sorting out both the design and print settings to improve this. This is a work in progress. I am using the STLs uploaded here and they definitely work for me,…

Downloads
19
Likes
5
Rating
0
P
PrintablesLegoRJ35

Insta630 Go 2 / Caddx Peanut ND filter Cases (2x, 3x, 4x)

You need to print it in TPU! The original design comes frome here: https://www.thingiverse.com/thing:5233243

Downloads
19
Likes
1
Rating
0
P
PrintablesToni

Bike lock holder ABUS 6300/90 Bordo

Made this very simple lock holder for my ABUS 6300/90 Bordo. I upladed the step file as well so you can adjust it to your needs. i attached it with VHB tape but i added screw holes if you need those. Feel free to comment.

Downloads
19
Likes
1
Rating
0
P
Printablesvalauvray

Dewalt DCF630 drywall gun

this support is used to clamp the drywall gun on its upper clip. the support is designed to be fixed under a shelf not on a vertical wall. the lower holes are used to pass a longer bit to screw the support.

Downloads
18
Likes
0
Rating
0
P
PrintablesSprinkles

DeWalt DC725K SLIDER 656309-00

This is a replacement part for the speed setting slider on a DeWalt cordless drill. This is part 6 in the drawing in the images. This part should work for the DC720, DC721, DC722, DC725, DC727, DC730, DC731, DC732, DC735, DC737, DC742,…

Downloads
18
Likes
0
Rating
0
P
PrintablesRemlej9

Coolermaster SK630/SK650 Key

Print with 0.1mm with the flat side on the sheet, might be some junk in the middle cross, should be easily removable with an allen key or knife. Tested on Coolermaster SK650 Cherry mx red Should work on other keyboards using cherry mx…

Downloads
17
Likes
1
Rating
0
P
PrintablesRudolff Vang

HP Thin Client T630 Stand with GoPro mount

I have modded the stand here to include a GoPro mount, where i have added a 140 fan since i have 4 of the T630's and airflow troug the systems. It will go out the Left or Right siide. I have included a mount for the 140mm fan i have ended…

Downloads
17
Likes
1
Rating
0
P
PrintablesBrownGenius

Skil MS6305-00 10" Sliding Bevel Miter Saw Dust Port Adapter for Ridgid Shop Vac

Connect your Ridgid shop vac to your Skil 10" Miter Saw (or any other tool that has a ~1.65" OD port)

Downloads
16
Likes
2
Rating
0