Search results: 7492

Sort order

48 models

P
PrintablesWoodenti

Thin Rip Jig for table saw (DeWalt 7492)

How to use the jig: 1) set the slider to the desired thickness 2) set it slightly before the blade 3) move the parallel guide until the wood touches the bearing, then fix it in position 4) perform the cut 5) repeat step 3) and 4)…

Downloads
1,566
Likes
455
Rating
5
P
Printableslewosh

Adjustment Jig for DeWalt Table Saw DWE7492

I found a well designed jig on the internet but because I already spent too much money on jigs and tools I built one myself. For your convenience I've included all Fusion 360 files so you can make changes to the design. To make…

Downloads
1,323
Likes
281
Rating
4.75
P
PrintablesMichel

Feather Board for DeWalt Table Saw 7491 & 7492

This is a remix of two designs to get the best of both for my DeWalt Table saw with metric nuts and bolts. Following Designs are used: Sliding Block: www.thingiverse.com/thing:3973092 The block was dapted to fit for the DeWalt 7491 & 7492…

Downloads
1,215
Likes
200
Rating
4.8
P
PrintablesBBTheStig

Dewalt 7491 Zero Clearance Table Saw Throat Plate - 7491RS - 7492QS

I redesigned this throat plate eliminating the screw holes and lock (lock is not necessary to have). I have fine tuned the bottom feet to be the exact height to level the plate with the table saw top (you can slightly sand these feet if a…

Downloads
1,153
Likes
105
Rating
5
P
PrintablesJiltedGeek

DeWalt DWE7492-QS and DWE7491-RS tablesaw insert

Because I broke my tablesaw insert plate, I needed to design this replacement part. I made it as accurate as possible and in two parts so it fits on the build plate. It is not a ‘zero clearance’ version, but as the pictures show a…

Downloads
856
Likes
158
Rating
4.67
P
Printablesmaxmar

Adjustment Jig for DeWalt DWE 7492 and DWE 7485 Table Saw

This is an adjustment jig for the DeWalt DWE 7492 and the DWE 7485 table saw. The set consists of multiple pieces for the adjustment of the fence and the blade relative to the miter slots of the table. Please pick the right extension…

Downloads
799
Likes
122
Rating
5
P
PrintablesPixel-Pete

OSVac Absaugadapter DeWalt DWE 7492

Link zum OSVac System: https://ossso.de/osvac/ Adapter für die Tischkreissäge DeWalt DWE 7492 um diese mit dem OSVac System zu verbinden. An dem Adapter wird auch gleich die Absaugung für die obere Abdeckung angeschlossen. Druckdaten:…

Downloads
718
Likes
116
Rating
5
P
PrintablesWoodenti

Featherboard optimized for DeWalt 7492

Marginally adapted the Featherboard. Created a new miter runner which is optimized for DeWalt 7492, based on my other design, using M5 nuts. Used my standard M5 star knob Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…

Downloads
712
Likes
119
Rating
5
P
PrintablesAtelierDZT

Zero Clearance Insert for Dewalt 7492

Just another Zero Clearance that fit for Dewalt 7492 with stock equipement. Print Settings Printer Brand: Creality Printer: CR10S PRO **Rafts:** No Supports: Yes **Resolution:** 0.20 Infill: 20 **Filament:** Amazon BasicFil PLA…

Downloads
528
Likes
45
Rating
0
P
PrintablesWoodenti

Miter Gauge for DeWalt 7492

This much more precise miter gauge helps to avoid the play between the groove and the standard miter. Depending on your print settings, you might want to print a section first to check the fit in the groove. it requires 2x M5 and 1x M6…

Downloads
513
Likes
93
Rating
4
P
PrintablesNoah's Prints

DEWALT Table Saw DWE7492

DEWALT table saw that is nearly 1:1 ratio to the actual DWE7492. I created this model for designing a workbench in my workshop.

Downloads
508
Likes
33
Rating
0
P
Printablesjcjames_13009

Dewalt DWE7492 Scale indicator clamp

This part is used to adjust and secure scale indicator of Dewalt DWE7492 table saw and avoid plastic distortion of original indicator when securing screws Remix from https://www.thingiverse.com/thing:4602164 Part has been redesigned to…

Downloads
394
Likes
75
Rating
4.83
P
PrintablesAlexandre M.

DeWalt DWE 7492 shop vac adapter/riving knife adapter

These adapters are made for the DEWALT DWE7492 Table saw adapter : - ID 35mm for shop vac - Port for 31.5mm ID hose to riving knife Riving knife adapter : - Tapered that goes inside the riving knife - Port for 31.5mm ID hose Fusion 360…

Downloads
293
Likes
35
Rating
0
P
Printablesjcjames_13009

Dewalt DWE7492 vacuum hose connector

I was needing to connect a vacuum hose to my table saw to extract wood chips and dust I designed the part in Fusion 360 with a cone to enter the table saw exits and an internal screw thread for the vacuum hose. After several tests I found…

Downloads
260
Likes
54
Rating
0
P
PrintablesMaxter3D

Mount Holder Fixation for Dewalt 7492 Pipe 28,5mm / Werkbank Fixierung für Dewalt 7492 Tischkreissäge

Just a fixation for the Dewalt Tablesaw 7492 You have the choice of locking it with upper part or just let it loose …

Downloads
215
Likes
24
Rating
5
P
PrintablesAndr34

Dewalt Table Saw (7485 / 7492) Curved Adapter to 40mm Hose

This adapter is curved so you can use inside a wood table and use a vacuum with 40mm hose. Curved prints are hard to print without support so I added also gcode with tree support as I have printed it. You can move printed part also when…

Downloads
210
Likes
23
Rating
0
P
PrintablesMichael Krüger

Blade Guard Dust Port for the Dewalt 7492

Blade Guard Dust Port for the Dewalt 7492 for the osVAC system. Spanhauben Adapter für die Dewalt 7492 für das osVAC system. Weitere Links/Details: Allgemeine Infos zum osVAC System: https://ossso.de/osvac/ Weitere Adapter von…

Downloads
202
Likes
25
Rating
5
P
PrintablesKarl E.

Dust Collector AddOn for DeWalt 7492

The grey hoses from my printed parts to the table saw are standard vacuumer hoses. The thread was a raw estimation, but it fitted at the first try. (yeah) it is left-handed. If you have another hose it should be easy to change the thread.…

Downloads
194
Likes
41
Rating
5
P
PrintablesBoVisfeldt

Footholder w. builtin shims for leveling for Dewalt 7485/7492 and simila table saws.

I recently built a worktable with a space for my dewalt 7485 tablesaw in one end. As the table is on wheels, the saw sometimes get a little out of allignment when moving the table around. Also, the wood got slightly out of allignment…

Downloads
191
Likes
46
Rating
0
P
PrintablesMichael Krüger

osVAC Adapter M32-R60 Dewalt 7492

This is a 60 mm male adapter for the osVAC system by Hobbyhimmel. Weitere Links/Details: Allgemeine Infos zum osVAC System: https://ossso.de/osvac/ Weitere Adapter von Hobbyhimmel:…

Downloads
188
Likes
21
Rating
0
P
PrintablesAlexandre M.

DeWalt DWE 7492 Frame clip

These clips are made for the DEWALT DWE7492 These clips allow you to hold and remove the tablesaw when it's needed. No need to unscrew it, just grab it and move. I recommend you to print it with the " U " face against the bed. My table…

Downloads
174
Likes
21
Rating
0
P
PrintablesAndr34

Dewalt Table Saw (7492 / 7485) Body Lock

Use this prints if you placed your Table Saw in place and you don't want to move it again. I used screw for wood to place it. I used two peaces of them but one is enough. There are 2 files: Low is for lower tubolar of table saw. Here I…

Downloads
160
Likes
48
Rating
5
P
Printablesmaxmar

osVAC Adapter for DeWalt DWE 7492 table saw

osVAC Adapter for the lower vaccuum port of the DeWalt DWE 7492 table saw. I printed in PETG, but other materials should work, too. No supports needed when you print with the table saw side facing the printing bed. Feedback Feedback?…

Downloads
143
Likes
15
Rating
0
P
Printableserelio_brolis

osVAC Adapter M32-M32-D60 Dewalt 7492

Good day, printhead's! Designed this for my workshop Dewalt DWE7492 power tool vacum connection. Also, because I use osVAC system all over the shop, added male end to both vacum connections. osVAC male ends M32 Dewalt outlet D60…

Downloads
135
Likes
17
Rating
0
P
Printablesnleskiw

Adaptor for Skil 7492 Orbital Sander to 1.25" Shop-Vac Vacuum Hose

This allows you to directly connect a 1.25" (31mm) Shop-Vac hose directly to the exhaust of a Skil 7492 Orbital Sander. Link to OnShape model . It may work on other sanders with the following specs: OD of exhaust port: Approx 38mm Pins:…

Downloads
118
Likes
12
Rating
4
P
Printablesadesir

Adaptateur aspiration 100 mm pour DW7492

Pour relier les deux sorties d'aspiration d'une scies sous table DW7492 (valable aussi pour les variantes Dewalt DW7491 et DW7485) à un aspirateur à copeaux et son tuyau de 100mm, voici un adaptateur sur mesure. Les embouts sont…

Downloads
103
Likes
11
Rating
5
P
PrintablesYeti

Dewalt 7492 3/8" Diameter dial guage

This fits dial guages that are 3/8" diameter. Used to align your table saw.

Downloads
93
Likes
26
Rating
0
P
PrintablesPanLyzwa

Dewalt 7492 Router Fence

Dewalt 7492 Router Fence holder that fit to 2 layers of 18mm playwood

Downloads
91
Likes
35
Rating
0
P
Printablesmaxmar

Vacuum adapter for DeWalt DWE 7492 table saw

Update If you use the osVAC system, have a look at the similar osVAC compatible vacuum adapter I made that you can use to connect your DeWalt table saw to the osVAC system here:…

Downloads
90
Likes
13
Rating
0
P
PrintablesHartmutA

DeWalt DWE 7492 Table Saw Adjustment Jig Remix

I print it all in PLA without support. Nozzle 0.6; Layer Hight 0,36

Downloads
87
Likes
11
Rating
5
P
PrintablesAnarchistPixel

100W TDA7492 Amplifier Enclosure

TDA7492 Amplifier Enclosure with SMPS and DAC. This enclosure houses the following components as seen in the pictures 1x TDA7492 100W amplifier 1x Arylic - Up2Stream Mini V3 1x 24V 6A SMPS 1x 150W DC-DC Buck Converter ( Bad idea, too much…

Downloads
75
Likes
11
Rating
0
P
PrintablesRoberto

Manípulo serra Dewalt 7492

Manipulo com diâmetro de 95mm

Downloads
67
Likes
17
Rating
0
P
PrintablesGrazzes

Dewalt 7492 lever table

print the model with supports as it was created. I recommend at least PETG material

Downloads
65
Likes
16
Rating
0

Gottlieb PN C17492CR

Gottlieb star post part number C17492CR for pinball machines. Set at 0.5" hole spacing for now. Print instructions Unassociated tags: star post Category: Mechanical Toys

Downloads
61
Likes
7
Rating
0
P
Printablesdrei-d-w

Dewalt DWE7492 90° - SHOPVAC CAMLOCK adapter - 3DW

The Dewalt DWE7492 - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system.

Downloads
60
Likes
12
Rating
0
P
PrintablesMichael

Remix Adjustment Jig for DeWalt DWE 7492 with adjustable Slider

Upgraded Version of the original File with adjustable T-Slot slider! You can use the original 8mm dial indicator mount from the original author. Fusion 360 File is added! Thanks to the original owner!

Downloads
55
Likes
2
Rating
0
P
Printablesdrei-d-w

Dewalt DWE7492 - SHOPVAC CAMLOCK adapter - 3DW

The Dewalt DWE7492 - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system.

Downloads
48
Likes
6
Rating
0
P
PrintablesRoberto

Duto de coletor de pó, serra Dewalt 7492

Duto de ar para serra Dewalt 7492

Downloads
48
Likes
3
Rating
0
P
Printablesgl4709

DeWalt DWE7492 and DWE7491

I resized the slot to .1mm this should make it much closer to being zero clearance. Increase the walls in your slicer.

Downloads
39
Likes
3
Rating
0
P
PrintablesSpy

TDA7492P Audio AMP Case

A case for a very common TDA7492P AMP. I designed it to fit very tight and without using any screws. Print Settings Rafts: Doesn't Matter Supports: No Category: Electronics

Downloads
34
Likes
5
Rating
0
P
Printablesdrei-d-w

DWE7485/DWE7492 Handrad Parallelanschlag / hand wheel

Als ich meine Tischkreissäge geliefert bekommen habe, war das Handrad zum Verstellen des Parallelanschlags kaputt. Kurzerhand habe ich es nachgebaut und gedruckt. Es funktioniert tadellos. Passt für: DWE7485 DWE7492 (in der Theorie sollte…

Downloads
33
Likes
7
Rating
0
P
Printablesdrei-d-w

Dewalt DWE7492 - SHOPVAC CAMLOCK adapter for saw blade extraction - 3DW

The Dewalt DWE7492 - SHOPVAC CAMLOCK saw blade extraction adapter is an accessory designed to connect the dust extraction port of the saw blade extraction to the SHOPVAC CAMLOCK vacuum system. For assembly I used one M3x6, one M3x10 and…

Downloads
30
Likes
10
Rating
0
P
PrintablesGDragon

Thin Rip Jig for table saw (DeWalt 7492) - mitre nut with space for zero clearance module

Remix miter insert, for compatibility with zero clearance module. After print just click it in! No glue needed. As a bonus, when the zero-clearance insert wears out, it can be easily replaced. you can use my remix (screw holes removed)…

Downloads
29
Likes
8
Rating
0
P
PrintablesMarcusRetaken

TDA7492P Audio Amplifier Mounting Plate

This faceplate is for the TDA7492P Stereo Amplifier Board with buttons.

Downloads
26
Likes
4
Rating
0
P
Printables3DMentes

TDA7492P Module enclosure Voronoi

Add some clearance between buttons and P2 connector, added some voronoi on top and a slot over the screws and text TDA7492P. Category: Audio

Downloads
23
Likes
1
Rating
0
P
PrintablesThomas Hoeser

DeWalt 7492 OsVAC Y-2-M32 Adapter

Print Setting PETG 0.3mm draft

Downloads
15
Likes
3
Rating
0
P
Printablesmodreoci

DeWALT DWE7492 to DXV20PC dust extraction adapter (parametric, PETG)

DeWALT DWE7492 → DXV20PC vacuum dust reduction Parametric 3D-printed adapter that connects the rear dust port of the DeWALT DWE7492 table saw directly to a DeWALT DXV20PC wet/dry vacuum hose — no duct tape, no rubber sleeve, no two…

Downloads
11
Likes
0
Rating
0
P
Printablesjvojtek

Dust Extraction Adapter for DeWalt DWE7492 Table Saw

Dust extraction adapter for the DeWalt DWE7492 250 mm table saw. Size: Ø59.8 × 92 mm. Part of my set of dust extraction adapters that connect my (mostly Makita) power tools to a Narex VYS 33-21 L shop vacuum – see the collection Makita…

Downloads
1
Likes
0
Rating
0