Dvířka SHARP GF-9090
Dále jsou nutné opěrné plíšky 2x. Do okénka příjde plexi o síle 2mm.
Print approx. €2.27–€2.77 excl. taxPreliminary estimate for one variant
- Downloads
- 11
- Likes
- 2
- Rating
- 0
65 models
Dále jsou nutné opěrné plíšky 2x. Do okénka příjde plexi o síle 2mm.
Print approx. €2.27–€2.77 excl. taxPreliminary estimate for one variant
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
I broke two Glass Shelf Support Piece on my Bosch gin81aef0 freezer, replacements are way too expensive for crappy plastic parts (part number 00639092), so I modeled replacement ones and they fit perfwectly.
Ford model T coupe Year 1909 Ondersteunt: Ja Resolutie: Dynamisch Invulling: 50% lijn Filament merk: 195 -200 Filament materiaal: PLA
Oil filter tool and wrench for Toyota 90915-YZZN1 Oil filter, Toyota Prius Recommend 30% or higher infill for strength.
This model is compatible with the lego system.
This model is compatible with the lego system.
I have created a simple replacement housing for the Liebherr activated charcoal filters. The original housing included a filter fleece, which I wanted to leave out of my design and placed the struts closer together. Simply print in PETG…
A better tap for the Smoby rainwater tank. The original tap breaks of very easy (mine did). My design uses a more rigid knob. I only designed the inner part, you can remove the original inner part very easily: After you unwind the tree…
These simple plugs are inserted into your chassis to keep dirt/water etc out. In a new car they should be inserted as part of the pre-delivery-inspection. They are bi-directional depending on your model of car or preference for…
Audi Box. Filament : Devil Design. Ocean Blue. ( 100% makita blue. ) PETG 0.20mm. 15% Infill : Gyroid. Nozzle : 230c. Bed : 90c. Support : None. Audi. Box. seal. Filament : KungFuFlex - Soft Flex - 85A - Panther Black.…
Replacement for BMW 52 20 8099555 rear seat side bolster clip Designed for my e46 coupe after the clip broke when removing the bolster panel and I found how expensive a replacement clip was to obtain. Likely fits other e46 3 series, e53…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
A close friend restored a 1931 Opel 1200. Cars of this era all look alike. By mounting this shield, the make of the car is instantly clear. This logo was used by Opel from 1909 until 1937. Please use UV and temperature stable filament for…
Update June 2025: 100 degrees Fahrenheit today, and the spring snap of the current version is no longer providing retention with the clip when printed in PETG. Update July 2025: ABS printed clip is holding up to 100 degree temp so far.…
Extruded from the DXF files provided by Nanuk. Step and FreeCAD files are also attached.
Audi Box. Filament : Devil Design. Ocean Blue. ( 100% makita blue. ) PETG 0.20mm. 15% Infill : Gyroid. Nozzle : 230c. Bed : 90c. Support : None. Box_Logo. Filament : Devil Design. Red. Klips. Prusament. Matte Black. Audi. Box. seal.…
Dad broke one of the feet on his loft ladder, so I designed a new one in Tinkercad. Hopefully someone has the same brand and will find this useful in future! Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 0.12 Infill: 100%…
These are near identical replacement feet for a Pioneer RT 909 tape recorder. I've made two sets of these for existing recorders and they fit perfectly. You'll need to print two of the feet in black PLA. Use the mirror function of your…
A model of the 88-94 OBS C1500 GM_15599095 88-94 C1500 Junction Block Nuts. These have not yet been test printed. MJF Nylon would probably be the best method/material.
lego 6180 6179 6178 6205 88646 4151 33909 41740
Thanks to the inserts made by brsc2909 for the Aldi Workzone / Allit Basic 33 / Jaycar 33 parts drawer, I remixed it to have 2x 12 sections for small screws. Since everybody needs different box sizes, I added the Fusion 360 and STEP Files…
A pencil/pen vase to keep your favorite pens and pencils, or anything else, in. It is 112mm tall and 77mm for the x and y axis. The photo shows the vase printed in vase/spiralize mode with 1 wall and 3 bottom layers. The stl file is…
Cossack of the 1st Chitinsky Regiment in parade uniform, 1909–1917
whelen 2909 siren use glue to put parts together
Toyota Body Plug 90950-01710A. Print with TPU, the lower the shore hardness the better. Might be a tight fit, so use a small tool to tap it into place if you choose to use a harder TPU.
Toyota Body Plug 90950-01941. Print with lower shore hardness TPU. If you choose to print in 95A shore hardness it might be tough to put in so use a small tool to tap it into place.
Multicolored Bologna FC 1909 logo, made for my kid who collects logo's. After he finished his “Eredivisie logo collection” he wanted a “Serie A logo collection” so here is one of the logo's. Print Instructions Print in 0.2mm layers, and…
Container, lid, and lid gasket (print in TPU) to suit Wagner Paint Sprayers, series W100 W150 W200 W300 (e.g. W350 which I have). I would highly recommend sealing the inside of the container with epoxy resin. I used 24g resin and 8g…
Replacement reduction gear for Redmond RFP-3909 Food Processor. Tested and working fine. Made with Fusion Personal, so no commercial use.
Why spend $2 plus shipping when you can print your own replacement part? After we moved in to our new place we found the range vent was missing the baffle plate blowing all the greasy exhaust air back in the kitchen. Found image with…
This is the base for the rainwater tap. I used the design of the knob as a reference. Note: I did not manage to make it completely watertight. When the tap is closed, it still leaks a little. Also with a few wraps of Teflon.
The Bluetti AC180 solar generator utilizes a 7909 barrel connection for the input from solar panels. These plugs become loose over time and result in burned and melted connections both on the cable and the Bluetti unit itself. This twist…
Hello all you Toyota restorers! Here is a cheap way to plug your frame. Online, the cheapest I could find these plugs is $3 with $20 shipping, so I said NO. Found one that fits a land cruiser, Modded it to fit the Toyota Pickup, and away…
As the Hailo trashbin didn't offer Lids, i created one by myself. This is useful, for instance if you store organic waste in your trashbin. It is compatible with those 7 Liter compartements: Articlenumbers: 1082479 and 1068909 Those bins…
I made almost original back cover for the Gteng watch but I put there a little bit more space to fit all the mods (adding minim osd micro and a voltage regulator) and nicely close it together without a problem. I'm not using original…
The metal tray for my soldering station stand was very rusted and looks awful. So I designed a replacement one in Fusion 360. Printed in ABS and it fits perfect. Print Settings Printer Brand: Anycubic Printer: i3 Mega Rafts: No Supports:…
Print face down with standard infills for your printer. Universal fit. Rigidity comes from metal 5.25 filtered covers and epoxy tack points (semi-circle locations to place epoxy drops for permanent attachment).
Print from TPU, because it is flexible + good layer adhesion. Horizontal_floor_nut_lockut-nut_lockut_RTC3746 you can use, if your material layer adhesion is poor. Should fit on: Discovery 1 (1989 - 1999) Discovery 2 (1998 - 2004) Range…
Printed in PETG, it's split into two parts to fit normal build plates. Recess on the front right is for the lovely BaMaKey TP-ii. Recess on the back fits a 6Ah LiFePo from Eremit. PowerPole to DC adapter for the Elecraft KX3 can be…
Cover for the Kohler Layne Toilet Seat quick release. I printed in PLA with 6 walls and 25% infill making it almost completely solid. I used arachne wall generator to get 3 walls in the compliant clip, organic thin supports, and the Orca…
Fusion 360 project included but 3rd party models removed to avoid copyright issues so might be missing some reference data. Feet sleeve part is to mount better rubber foot on the shaft instead of the "standard" half sphere part. O-ring is…
This is a wall to prevent robot vacuums from trying to climb up the foot of the Reer 1909 changing table heater. The foot has a diameter of 50cm so the wall should suit any other thing with this dimension. Printing 8 of these should give…
Clutch attachment for blender Saturn ST-FP9090
Wer kennt das nicht, einmal kurz nicht aufgepasst und schon fällt das Studiolicht beim aufschrauben auf das Stativ runter oder man greift es etwas fester und schon ist der Diffusor gesprungen oder es fehlen Teile davon. So ging es mir…
I did flat bottom for my sticker. Thanks for great design! Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: Yes Resolution: 0.1 Infill: 10 Notes: Printed in PLA Category: R/C Vehicles
Für defekte bzw. verlorene Endkappen der Längsträger des Thule Fahrradträger 909 (auch als Ersatzteil 50286 erhältlich). In PLA+ gedruckt, für intensivere Nutzung ASA oder Ähnliches verwenden.
WARNING Electrical and fire hazard: All modifications to your cooking appliances are at your own risk, only proceed if you have the right knowledge, and with quality electrical parts. Hi, this is a copy of the original hinge cover for a…
its a gun from a Roblox game from Centaura
https://en.wikipedia.org/wiki/Flag_of_Maine_(1901%E2%80%931909) Included both the full print and parts.
Quite rare part for Daewoo Matiz 0.8 engine Bracket-Breather hose GM 96419094. This part has been redesigned to be suitable for print from original spare part. Part has been printed from Prusament PA11 Carbon Fiber or symilar material…
A common issue with DJM-909s are sticky FX buttons. A foam strip underneath deteriorates with age and prevents the buttons from returning. When removed and the switches replaced you're left with a gap which affects the button's…
Replacement volume knob for the Mipro MI-909R wireless receiver. Designed as a direct replacement for the original knob and suitable for 3D printing. For the best surface quality and sharper details, I recommend printing it with a 0.2 mm…
A pencil/pen vase to keep your favorite pens and pencils, or anything else, in. It is 112mm tall and 77mm for the x and y axis. The photo shows the vase printed in vase/spiralize mode with 1 wall and 3 bottom layers. The stl file is…
Container, lid, and lid gasket (print in TPU) to suit Wagner Paint Sprayers, series W100 W150 W200 W300 (e.g. W350 which I have). I would highly recommend sealing the inside of the container with epoxy resin. I used 24g resin and 8g…
Replacement reduction gear for Redmond RFP-3909 Food Processor. Tested and working fine. Made with Fusion Personal, so no commercial use.