Search results: 93

Sort order

1,376 models

P
PrintablesPointNemo

Sanding Block 93x115, 115x140

Printing parameters: Resolution: 0.2 mm Perimeters: 4 Infill: 15% Supports: no Brim: recommended Assembly: Add some corc, rubber or foam at the bottom of the block. When you clamp in sand paper, the blocks will be fixed. Review: Related…

Downloads
30,301
Likes
12,817
Rating
4.9
P
Printablesflatsixguy

Cupholder V2 for BMW E90 E92 E93 etc.

You can now print it on the sloped, upper side to get a much better look! I could reduce the print time and used material by using the shell-command. If you use the textured PEI-sheet, you might get a nice finish on the upper side. So I…

Downloads
2,215
Likes
200
Rating
4.6
P
PrintablesLGM

BMW E90 E91 E92 E93 Cupholder

BMW E90 E91 E92 E93 Cupholder for 0.5 l PET and RedBull can

Downloads
594
Likes
43
Rating
3
P
PrintablesJohannes

BMW C1 Overload Protection (4652852493)

Overload protection part for BMW C1 stand mechanic See Repository with full history, issues and more: https://github.com/jteiwes/overload_protection Design The design was created from a broken part by measuring and test-printing several…

Downloads
566
Likes
12
Rating
0

Tobii Eyetracker 5 Curved Monitor Mount 1800R - Samsung Odyssey OLED G9 G93SC G95SC

UPDATE 09/2024 Add new version V8 for G93SC and G93SD with monitor clip. You can clip this version to your monitor without additional tape. Would be nice to get feedback for G95SC. Add new version V5 to fit G95SC. Description This is my…

Downloads
483
Likes
26
Rating
5
P
PrintablesRobert Gogete

V3A-93 Tram Model

V3A-93 tram model. Printable as a single piece with supports only needed for the floor. Can be printed either entirely or each wagon separately and then glued together. The model is partially accurate as I've used pictures as reference…

Downloads
173
Likes
15
Rating
0
P
PrintablesMavagoodtime

Vectra C & Saab 93 Recirculation Servo Unit Smaller White Cog

Replacement cog for Vectra C and some Saab 93 recirculation units where the small white cog has lost teeth. Where there is a clicking noise from the servo/motor unit one or both of the white cogs may have lost teeth. The larger one can be…

Downloads
172
Likes
19
Rating
0
P
PrintablesJamash47

E90 E91 E92 E93 headlight cap

headlight cap for bow e90

Downloads
161
Likes
22
Rating
0
P
PrintablesHaggard

Prusa MK4 Camera Mount for Logitech C930 / Logitech C920

As an Remix from @ebeeche_158366 camera mount, I don't want toremove the foot of my Logitech C930. So I remix the camera arm, that it can hold a camera with tripod hole. Supports are necessary for one side. Please check the original…

Downloads
113
Likes
14
Rating
4.5
P
PrintablesMichaelQ

Original Prusa Enclosure- Logitech C920 / C930 Mount

Model is designed to fit perfectly behind my "Original Prusa Enlosure - Raspberry Pi Mount with 7" Display" model. For the ball joint, you need: 2x M3 nut 1x M3 16 mm Allen head 1x M3 10 mm Allen head I am using a Logitech C930, it has a…

Downloads
104
Likes
26
Rating
5
P
PrintablesLanka With

Samsung JOG button for LS49CG932SNXZA

My [Samsung 49 inch Odyssey 0.03 ms 240 Hz OLED G9 Gaming Monitor (LS49CG932SNXZA)] JOG button / joystick crapped on me . It seems to be a common issue[…

Downloads
70
Likes
0
Rating
0
P
PrintablesJulianKoe

Adapter für Absaugung 93mm (Metabo DH330)

Adapter für einen Metabo DH330 Dickenhobel. Passt in die Absaugevorrichtung hinein und kann dann mit einem Schlauch verbunden werden.

Downloads
70
Likes
6
Rating
0
P
PrintablesJiří Novák

Tatra 57 HADIMRŠKA - 1932

Tisk na dvě poloviny, podpěry, výplň 10%, tryska 0,4, PLA.

Downloads
63
Likes
2
Rating
0
P
PrintablesR.R.

Mercedes-Benz SSKL Mille Miglia #87 (1931)

Mercedes-Benz SSKL / Mille Miglia #87 (1931) Actively engaged in all major racing events worldwide between 1927 and 1933, including Grand Prix contests, endurance races, and hill-climbing championships, the Mercedes-Benz supercharged…

Downloads
61
Likes
3
Rating
0
P
PrintablesR.R.

Talbot-Lago Coupé Typ 150 SS Figoni & Falaschi Teardrop (1937-39)

When Talbot presented the Coupé for the first time during the Paris Motor Show in 1937, the visitors were impressed immediately.This very quickly gave rise to the terms “goutte d’eau” (drop of water) and “teardrop coupé”, which were never…

Downloads
61
Likes
1
Rating
0
P
PrintablesJiří Novák

Praga BABY BA coupe 1934

Dvoudveřová varianta - coupe.

Downloads
47
Likes
4
Rating
0
P
PrintablesR.R.

Mercedes-Benz SSKL, Mille Miglia, 1931

Mercedes-Benz SSKL / Mille Miglia #87 (1931) Actively engaged in all major racing events worldwide between 1927 and 1933, including Grand Prix contests, endurance races, and hill-climbing championships, the Mercedes-Benz supercharged…

Downloads
47
Likes
5
Rating
0
P
PrintablesR.R.

Bugatti Royale Roadster Esders (1932)

Bugatti Royale Roadster Esders (1932)

Downloads
43
Likes
4
Rating
0
P
PrintablesR.R.

ŠKODA POPULAR Monte Carlo (1936-1939)

ŠKODA POPULAR Monte Carlo (1936-1939)

Downloads
39
Likes
5
Rating
0
P
Printablesmattwells83

A193 Mesh Riser for concrete pours

I carried out a concrete pour recently for which I was reinforcing with A193 mesh. I forgot to order risers to hold the mesh so quickly designed and printed a number of these to suspend the mesh at around the 55mm mark. Support has…

Downloads
38
Likes
0
Rating
0
P
PrintablesJiří Novák

Škoda RAPID 1,4 SV rok 1936

Tisk tentokrát na zkoušku vcelku za pomocí podpěr. Filament PETG, výplň 15%, tryska 0,4.

Downloads
35
Likes
3
Rating
0
P
PrintablesJiří Novák

Praga BABY kabriolet 1934

Jeden z krásných modelů Praga BABY - varianta kabrio. Dále byla varianta Praga BABY BA coupe.

Downloads
35
Likes
4
Rating
0
P
Printablesspencerandhill

Metabo TKU 1693 211 Absaugstutzen unten

Deutsch Ein Ersatzabsaugstutzen für die Metabo TKU 1693. Das Teil hat in der original Explosionszeichnung die Teilenummer 211. Die Artikelnummer lautet 1381695480-324. Sollte auch für die Metabo PKU 250 passen. Ich empfehle folgende…

Downloads
31
Likes
1
Rating
0
P
PrintablesThunderhead

Original Prusa Enclosure- Logitech C920 / C930 Mount - with passthrough ziptie recesses

Please check out MichaelQ's original model to get the other files required: https://www.printables.com/model/375059-original-prusa-enclosure-logitech-c920-c930-mount

Downloads
17
Likes
3
Rating
0
P
PrintablesJensen33

SAGEMCOM DIW 3930 TV box wall mount

Bracket for mounting the SAGEMCOM DIW 3930 TV box on the wall behind the TV. The bracket is mounted with the big opening facing up allowing the TV box is inserted from the top. The small rectangular hole is for the status LED.

Downloads
13
Likes
1
Rating
0
P
PrintablesJace1969

Soviet Pistol Tokarev TT-33 Hand Gun from 1937

Hi Craig, This was all I had, hope it was what you were after, Cheers Jace https://en.wikipedia.org/wiki/TT\_pistol

Downloads
3,530
Likes
127
Rating
4.5
P
PrintablesJosé Pedro

Porsche 911 Turbo (930) - Classic German Performance Car Model

Own a legend of automotive performance with this 3D printable STL model of the Porsche 911 Turbo (930). This classic German performance car model is perfect for automotive enthusiasts and fans of iconic 70s and 80s supercars, showcasing…

Downloads
2,955
Likes
330
Rating
5
P
PrintablesHD_Creator

Nut M6 - ISO4032 / DIN934

This design of a M6 nut tries to follow the standards of ISO4032 and DIN934 as closely as possible. The thread is designed to fit to a M6 screw with exactly the same mechanical play as a metal M6 nut (when printed in PETG on a Prusa i3…

Downloads
2,560
Likes
33
Rating
5
P
Printablespino1021

Porsche 993 turbo silhouette Wall Art

Porsche Wall Art size: 80 cm Separated in 4 parts, so they fit perfect on your mk3. Of course you can scale the model Add some double-sided tape and sick it on the wall. Invisible and easy to remove. Post your print and enjoy.

Downloads
2,553
Likes
654
Rating
4.89
P
PrintablesTycho Design

M3 Screw Collection M3x6-M3x30 ISO 4017 / DIN 933

Collection of screws (ISO 4017 / DIN 933) including : M3x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…

Downloads
1,948
Likes
106
Rating
5
P
Printablesthall72

Lego Compatible (4493.dat) Animal Horse

This model is compatible with the lego system.

Downloads
1,748
Likes
181
Rating
4.67
P
PrintablesSoarpix

VW Beetle BAJA BUG - 1/18 RC body (PXtoys 9302E)

**All my designs are free to download, but if you like my work please consider to buy me a coffee =)** VW Beetle BUG - 1/18 RC body (PXtoys 9302, 9300) I bought a cheap RC car and designed a new body for it. You can find link to the RC…

Downloads
1,597
Likes
306
Rating
5
P
PrintablesKahnindustries

Piplup - Pokemon 393

In honour of Pokemon Go's January(?) Community day I have knocked up a Piplup one piece and multi-material model! Print instructions Category: Creatures

Downloads
1,424
Likes
389
Rating
5
P
Printablesmochr

CZ 175 - 1939 1/10

Československý motocykl vyráběný v letech 1935-1946. Motorka měla tradiční černé barvy, verze Special se lišila chromovanými detaily a ráfky. Pozdější verze měly nožní řazení, z počátku výroby se dodávalo řazení ruční vedle nádrže.…

Downloads
1,381
Likes
360
Rating
5
P
Printablesthall72

Lego Compatible (43093.dat) Technic Axle Pin with Friction

This model is compatible with the lego system.

Downloads
1,379
Likes
82
Rating
5
P
PrintablesTycho Design

M5 Screw Collection M5x6-M5x50 ISO 4017 / DIN 933

Collection of screws (ISO 4017 / DIN 933) including : M5x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too…

Downloads
1,377
Likes
96
Rating
5
P
Printablesbriancmoses

LSI 9300-16i HBA Cooling Fan Shroud

The LSI 9300-16i HBA is a wonderful choice for DIY NAS enthusiasts, but outside of data center with frigid climate control and numerous fans pushing air over its heatsink, it tends to get warm. This shroud clips around the LSI 9300-16i's…

Downloads
1,327
Likes
83
Rating
4.7
P
PrintablesPavel Janeček

703035793C front speaker cover for VW T4 1996-2003

About model My custom design of Loudspeeker trim (front door) for Volkswagen T4. Made for a friend's Multivan, because I didn't like an already available multipart cover with need of glueing on Thingiverse. Compatibility For T4 Multivan /…

Downloads
1,317
Likes
94
Rating
5
P
PrintablesTycho Design

M6 Screw Collection M6x6-M6x50 ISO 4017 / DIN 933

Collection of screws (ISO 4017 / DIN 933) including : M6x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too…

Downloads
1,232
Likes
89
Rating
5

Bentley The Bleu Train year 1930 Designer Ed van der Heijden

Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA By Ed van der Heijden In the year 1930, the magnificent Benley Bleu Train embarked on a journey that would etch its name in the annals of luxury…

Downloads
1,191
Likes
426
Rating
5
P
PrintablesTycho Design

M3-M30 Nut Collection DIN 934

Collection of metric nuts including : M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20, M22, M24, M30. For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…

Downloads
1,152
Likes
258
Rating
5
P
PrintablesMike770502

BMW E90 E91 E92 E93 Cupholder with lighter hole

I added a 29mm cigarette lighter hole and a bmw logo on top of Fix3D:s model. You should probably use the original model's slicer settings. I used mostly default settings and the print could have come out better:) The bottoms of the holes…

Downloads
1,111
Likes
77
Rating
5
P
PrintablesDorffMeister

Case for 2.8" ILI9341 TFT LCD and microcontroller

Video demonstrating the touch controls / adjusting brightness https://www.youtube.com/watch?v=x7zqOPEqBCw This project is for the 2.8" ili9341 TFT LCD and Touchscreen . The ESPHome code for this project, which is a clock showing inside…

Downloads
1,049
Likes
43
Rating
0
P
PrintablesHorbit

LSI 9300-16i Noctua NF-A9x14 Fan Shroud

This is an older design. Please consider also checking out this one created by @ briancmoses : https://www.printables.com/model/1046107-lsi-9300-16i-hba-cooling-fan-shroud This HBA runs pretty hot and I wanted to mount a fan to it instead…

Downloads
1,047
Likes
72
Rating
5
P
Printablesthall72

Lego Compatible (3937.dat) Hinge 1 x 2 Base

This model is compatible with the lego system.

Downloads
991
Likes
51
Rating
0
P
Printablesd3rdav3

DK AMD CPU Case (AM2, AM2+, AM3, AM3+, AM4/Ryzen / Socket 754/939)

Case for a safety transport or storage of an AMD CPU. Perfect then u selling CPUs. TIP: Secure the case with a peace of tape for shipping. Hope u Enjoy

Downloads
953
Likes
66
Rating
4.69
P
PrintablesTycho Design

M8 Screw Collection M8x6-M8x80 ISO 4017 / DIN 933

Collection of screws (ISO 4017 / DIN 933) including : M8x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the…

Downloads
840
Likes
61
Rating
5
P
Printablesfreakstuff_de

Knob for metric nut of DIN 934 - M3, M4, M5, M6, M8, M10, M12, M14, M16, M18 and M20

A thread is inserted into the handle during printing by inserting a DIN 934 nut. Depending on the size and the layer thickness set, a corresponding pause must be added in the slicer directly before the layer over the nut . In Bambu Studio…

Downloads
749
Likes
98
Rating
5
P
Printablesthall72
Downloads
720
Likes
76
Rating
4
P
PrintablesJosé Pedro

Porsche 911 (964) Turbo 1993 - Legendary German Sports Car Model

Own a piece of automotive legend with this 3D printable STL model of the 1993 Porsche 911 (964) Turbo. This legendary German sports car model is perfect for automotive enthusiasts and fans of air-cooled Porsches, showcasing iconic design…

Downloads
674
Likes
130
Rating
0
P
Printableshallonhatt

Logitech C920/C930E Prusa i3 MK3/MK3S X-axis holder

A holder for a Logitech C920/C930E webcam without the heavy base for a Prusa i3 MK3/MK3S X-axis nema 17-motor. Uses the original hinge to keep tilt functionality. Last picture is from the webcam. It requires disassembly of the camera, but…

Downloads
671
Likes
135
Rating
4.91
P
PrintablesTVL 3D

Awning Hook for Thule Omnistor 9200/9300

English: This is a hook for the channel rail of a Thule Omnistor 9200/9300 awning. It features a a bracket for some fairy lights. I use this fairy lights with the hook Camplight:…

Downloads
664
Likes
58
Rating
4.83
P
PrintablesTycho Design

M4 Screw Collection M4x6-M4x40 ISO 4017 / DIN 933

Collection of screws (ISO 4017 / DIN 933) including : M4x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…

Downloads
663
Likes
65
Rating
5
P
Printablesthall72

Lego Compatible (3938.dat) Hinge 1 x 2 Top

This model is compatible with the lego system.

Downloads
656
Likes
48
Rating
5
P
PrintablesVladimir Kafka

Czechoslovak 1938 light fortification object "řopík" (A-140Z, atypical)

Between 1935 and 1938, the Czechoslovakian government had been building a line of border fortifications as a defense against Hitler's Germany. However, it was still far from finished in 1938, and in the end, it was never used because of…

Downloads
640
Likes
60
Rating
5
P
PrintablesTHS92

M10 DIN 933 - Bolt and nut

M10 bolts from 20 to 50 + nut DIN 933

Downloads
632
Likes
13
Rating
4.5
P
Printablesfreakstuff_de

Slim knob for metric nut of DIN 934 - M3, M4, M5, M6, M8, M10, M12, M14, M16, M18 and M20

A thread is inserted into the handle during printing by inserting a DIN 934 nut. Depending on the size and the layer thickness set, a corresponding pause must be added in the slicer directly before the layer over the nut . In Bambu Studio…

Downloads
578
Likes
52
Rating
5
P
Printableshandro

LSI 9300-8i Noctua NF-A4x10 Fan Shroud

Fan shroud to mount an Noctua NF-A4x10 to an LSI 9300-8i HBA. Design idea copied from @BlackHornet_355398 's fan shroud here: https://www.printables.com/model/377809-lsi-9300-16i-noctua-nf-a9x14-fan-shroud I have a LSI 9300-8i, but this…

Downloads
571
Likes
42
Rating
5
P
PrintablesPhilippHee

Miss Minutes 1893 Clock (Loki)

Fan Art Clock of Miss Minutes , a character in the television series Loki produced by Marvel Studios . You can use the clock as a wall clock and as a table clock. The clock has a size of about 155 mm x 170 mm x 26.8 mm. The dial has a…

Downloads
564
Likes
183
Rating
4.89
P
Printablesthall72

Lego Compatible (93219.dat) Minifig Baseball Cap with Button on Top

This model is compatible with the lego system.

Downloads
563
Likes
55
Rating
5
P
Printablesthall72

Lego Compatible (93220.dat) Minifig Baseball Bat

This model is compatible with the lego system.

Downloads
545
Likes
68
Rating
0
P
PrintablesPrintitou3D

Blueprint Porsche 911 Turbo (type 930)

Blueprint généré à partir d'une image SVG. Changement de couleur au layer 11 (couche de 0.2mm)

Downloads
535
Likes
157
Rating
0
P
Printablesthall72

Lego Compatible (93273.dat) Slope Brick Curved 4 x 1 Double

This model is compatible with the lego system.

Downloads
534
Likes
34
Rating
4
P
Printablespino1021

Porsche 930 Wall Art Silhouette

Porsche 930 Wall Art Easy to print for up to 1m length (6 parts) on Prusa MK3/4 bed size. Of course you can scale it the size you want. I recomend a strength of about 2-3mm. Add some double-sided tape and stick it on the wall. Invisible…

Downloads
529
Likes
168
Rating
5

Indian Four nr 439 year 1939 Designer Ed van der Heijden.

Indian Four nr 439 year 1939. Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA

Downloads
527
Likes
174
Rating
5
P
Printablesthall72

Lego Compatible (93223.dat) Minifig Beard Medium Short

This model is compatible with the lego system.

Downloads
524
Likes
47
Rating
5
P
Printablesthall72
Downloads
518
Likes
35
Rating
0
P
Printablesthall72
Downloads
507
Likes
58
Rating
5
P
PrintablesJace1969

Fallout 4 T-51 Full body Armour 6.4 foot - 193cms Tall

Hi Hunter, you asked if I had a T-51 suit and I do, unfortunately it needs a lot of work for which is a little out of my league and time wise. Hopefully you or some one else will take the time to improve on it and reupload here for all to…

Downloads
501
Likes
127
Rating
0

T ford Dump Truck year 1930 Designer Ed van der Heijden

Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Certainly! Here's an overview of interesting facts about the 1910 Ford Model T Dump Truck: Innovative Design : The 1910 Ford Model T Dump Truck…

Downloads
495
Likes
96
Rating
0
P
Printablesthall72
Downloads
487
Likes
59
Rating
0
P
PrintablesMister2t

Porsche 993 HiFi Speaker Pod for 6.5" Woofer and 3" Mid

Designed this for Alpine R series 6.5" woofer and 3" midrange speakers. But, may work for other speakers with same bolt pattern. The pod retains the factory speaker angles relative to the door, but adjusts the depth to provide clearance…

Downloads
469
Likes
37
Rating
0

Steamroller (stoomwals) 3D "Old Smokey" year 1930 Designer Ed van der Heijden.

Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Sure, here's a brief overview of the 1930 steamroller "The Old Smokey" in English: "The Old Smokey," built in 1930, is a historic steamroller…

Downloads
469
Likes
102
Rating
0
P
PrintablesMM

kit card Ford A Fordor 1930

can be printed together or separately in other colours Print in place kit card , Assembly required need to use a support easy to assemble

Downloads
465
Likes
99
Rating
4.5
P
PrintablesVladimir Kafka

Czechoslovak 1938 light fortification object "řopík" (type D2)

Another remix of my "A-140Z atypical" bunker. This is the D type , a small variant, like one half of the larger A type, with just one gun and four crew members. There were two subvariants, D1 and D2, mirrored versions of each other, with…

Downloads
461
Likes
44
Rating
5
P
Printablesthall72

Lego Compatible (93563.dat) Minifig Hair Mohawk

This model is compatible with the lego system.

Downloads
460
Likes
51
Rating
0
P
PrintablesTycho Design

M10 Screw Collection M10x10-M10x90 ISO 4017 / DIN 933

Collection of screws (ISO 4017 / DIN 933) including : M10x 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 80, 90 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If…

Downloads
456
Likes
36
Rating
5
P
Printablestinicuro

Small parts bins for Harbor Freight parts storage case (#93928)

7 different versions of small parts bins for the famed Harbor Freight portable parts storage cases (#93928). These portable cases are the best you can buy for the money right now compared to the much more expensive Sortimo cases and…

Downloads
455
Likes
99
Rating
0
P
PrintablesOnemoredave

Bestway pool pump filter cartridge - Type 1 - 58093

Fits pretty much perfectly into the bestway flowclear pump model 58381. As far as I can work out, it is the Type I Version of the filter with model# 58093 which is 80mm in diameter and 90mm tall. Print two caps out of tpu and the inner…

Downloads
455
Likes
73
Rating
5
P
Printablesthall72
Downloads
455
Likes
58
Rating
0
P
Printablesthall72

Lego Compatible (93789.dat) Minifig Spear with Flat End

This model is compatible with the lego system.

Downloads
448
Likes
52
Rating
5
P
Printablesthall72

Lego Compatible (93055.dat) Minifig Sword Katana (Dragon Guard)

This model is compatible with the lego system.

Downloads
448
Likes
71
Rating
0
P
PrintablesFireTime

LSI 9305-16/24i fan shroud

LSI 9305-16i or LSI 9305-24i fan shroud. This is a remixed design from barichardson with most overhangs removed to be more easily printed. Snaps onto the heat sink without the use of screws. Four STL files for both the 16i and 24i with…

Downloads
446
Likes
24
Rating
5
P
Printablesthall72

Lego Compatible (93565.dat) Minifig Body and Shoulder Armour Smooth

This model is compatible with the lego system.

Downloads
444
Likes
65
Rating
5
P
PrintablesModel Magic

Nightmare Before Christmas - Jack Skellington - 1993

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
443
Likes
67
Rating
0
P
Printablesthall72
Downloads
432
Likes
34
Rating
0
P
PrintablesModel Magic

Frankenstein - 1931 - Universal Monsters

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
428
Likes
66
Rating
5
P
Printablesthall72

Lego Compatible (51493.dat) Animal Deer with Antlers Stag / Reindeer

This model is compatible with the lego system.

Downloads
419
Likes
72
Rating
5
P
PrintablesFC2M3D

8-Bit Super Mario Bros Star (1993) Keychain (Remix)

NO MMU NEEDED I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Downloads
413
Likes
68
Rating
0
P
PrintablesKeepenithalal

toyota supra a80 1993

has seats inside

Downloads
405
Likes
24
Rating
0

Jaguar SS100 Year 1936 scale 1:24 designer Ed van der Heijden

Rafts: Yes Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA

Downloads
404
Likes
69
Rating
5
P
Printablesthall72

Lego Compatible (93561.dat) Minifig Visor Hockey/Football Mask

This model is compatible with the lego system.

Downloads
400
Likes
46
Rating
5
P
Printablesthall72

Lego Compatible (79389.dat) Bracket 1 x 1 - 2 x 1 Down

This model is compatible with the lego system.

Downloads
395
Likes
37
Rating
3
P
PrintablesVladimir Kafka

Czechoslovak 1938 light fortification object "řopík" (A-160Z)

A remix of my "A-140Z atypical" bunker. This is the A-160Z , in contrast with the previous model, this is a pretty standard specimen of the A-160 type (which was the most common of all types). --- Varianta mého předchozího modelu…

Downloads
389
Likes
34
Rating
4.5
P
Printableswired

Dell XPS 13 9315 Webcam Cover

My wife asked for something that allows her to block her 9315 XPS Webcam, and this was the result. It fits the laptop neatly, not too tightly, blocking the entire array of sensors at the top without interfering with the screen. I…

Downloads
384
Likes
11
Rating
5
P
Printablesthall72

Lego Compatible (43693.dat) Minifig Head Skull

This model is compatible with the lego system.

Downloads
383
Likes
57
Rating
5
P
PrintablesZachryWD

Ford Mustang Foxbody 79 ~ 93 Cookie Cutter

Food Safety, PLA is generally considered to be food safe. Double check to make sure you are using non-toxic materials for any prints you intended to use with food. I am not a baker and getting the perfect consistency of dough to work with…

Downloads
379
Likes
58
Rating
4.5

Housing Display TFT ILI9341 320X240 (ESP32 /ESP8266)

Gehäuse für ein ILI9341 TFT 320X240 Display Das Gehäusedeckel wird nur aufgesteckt. Das Display wird unter der Kappe mit 4Stück M3 X max.10mm Schrauben festgehalten. Das Gehäuse bietet genügend Platz um darin einen ECP32 oder D1-Mini etc.…

Downloads
377
Likes
25
Rating
0
P
PrintablesxSteve

Lamp Shade 093

Here are 2 files to of the same basic design. One shade has the grooves going in and the other shade has grooves popping out. I just turned the design in side out. There are no wires to cut, splice or solder together to make a base. It is…

Downloads
376
Likes
111
Rating
0

Platte 60mm x80mm x 1,93mm

Platte selbst erstellt

Downloads
366
Likes
4
Rating
0