The source marked this model as adult content.
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
- Downloads
- 941
- Likes
- 104
- Rating
- 0
607 models
The source marked this model as adult content.
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
Ancient Greeks were famous for being the earliest known culture to produce anatomically accurate figures in naturalistic poses. “ Diadumenos ,” meaning a person wearing an ornamental headband, is one of the most famous of these subjects.…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Steel sheet holder that is graduated so that you can see what sheets are in the holder without moving others out the way. It also allows you to see them inside an enclosure without opening the enclosure and potentially ruining a print.…
Print approx. €9.94–€12.15 excl. taxPreliminary estimate for PETGSource material: PET
Place the model on the flat bottom side. Rotate it by 45°. This way it should fit within your build surface. Rafts: No Supports: No Resolution: 0.2 Infill: 15%
Print approx. €4.96–€6.06 excl. taxPreliminary estimate for PETGSource material: PET
A version of a Diadumenos torso with the gap between the legs closed and the angle of the shoulder stumps increased to make it easier to print as a continuous single outline object. Shout out to Cosmo Wenman , watakach , and Polykleitos .
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
Vaso especial para las personas con movilidad reducida en el cuello. Special glass for people with reduced mobility in the neck. Print instructions Print with PET or PLA, not use ABS. 30% infill or more.
Print approx. €4.34–€5.30 excl. taxPreliminary estimate for PETGSource material: PET
A torso sculpture released by user watakach with a CC0 license on BlendSwap.com . The model has been repaired to be a complete solid through Netfabb, but besides that, I've done nothing to modify it. Credit to Cosmo Wenman for his open…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Turn table with 10° indication marks with a 0° reference point. Used to take photogrammetry pictures. constructed around a bearing 40/68x15 mm. the base has extra dove-tail cut-ins to receive DIY accessories of your making.
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for PETGSource material: PET
(EN version follows) Ve škole máme sady tělísek o stejném objemu a o stejné hmotnosti od 3B Scientific, které používáme při výuce Archimedova zákona. Válečky o průměru 20 mm vyrobené z různých materiálů jsou v sadách o stejném objemu a…
Print approx. €1.86–€2.28 excl. taxPreliminary estimate for PETGSource material: PET
I designed this paint brush rack so that I can hang my brushes bristles side down so they can dry properly and prevent water deteriorating the glue in the ferrule. An important aspect I considered was ease of use – I wanted a very quick…
The source marked this model as adult content.
Shackles and chains. Two sizes for Halloween costume; prisoner, thief, zombie, slave or similar. The handcuffs have hinges and snap closed with click. Print one closure clip for each shackle, and two closure clips for each Leg iron.…
A simple small graduation cap. There is a version with an hook to attach it to presents.
Inspired by the original LEGO minifigures from Series 5. I converted to Fusion 360 the original files by Jack Kashuk ( https://www.thingiverse.com/thing:4681693 ).
The bird with the brains. A real teachers pet. The one that knows owl lot. Collect them all! Check out the FULL COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Designed to print with Tree Supports on build…
¡Atención!. Este es un archivo digital STL para descargar, ¡no es un elemento físico! Podrá descargar los archivos inmediatamente después de recibir el pago. DESCRIPCIÓN DEL ARTÍCULO "¡Celebra el logro de tus seres queridos con nuestro…
I created a Graduation Cap container or bowl, a.k.a. Mortar Board, as a present for a recent graduate. We filled it with customized M&Ms but you could fill it with a present or many other things. It is a threaded cap that screws onto the…
This is an HO scale model of the Pennsylvania Railroad viaduct over the Schuylkill River in Phoenixville, Pennsylvania. The model was developed using information from HistoricBridges.org and Google Maps in Fusion 360. For more information…
Viaduct rail compatible with BRIO and IKEA wooden rails. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini Straight Track - B2 Mini Straight Track - C2…
Graduation is a special day and deserves a special gift, one of them can be this miniature graduation cap with added details such as name or date of graduation. The model has two colour changes: from the main body to the tassel, from the…
Ive Left the U logo off as I used the slicer font add for the U. "College Block" font can be altered to get close. I know its popular art to customize the jacket, so homage to that. Take Care!
Viaduct rail compatible with BRIO and IKEA wooden rails. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini Straight Track - B2 Mini Straight Track - C2…
The model was sliced with meshmixer and i added pegs to help you to glue the parts together, files are unsupported, i trust you, you can do it! Model was remixed as part of a challenge in the mz4250 patreon, hope you guys like it. the…
Hello, "I'M AN ADULT" Inspired keychain. Using 1 color printer (filament change design) Thanks for your download, enjoy the print!
This is my MMU remix of the awesome SeaDuck model from the 90s TV Show “Talespin” model made by Grafit (all credits to him) . 100% printed no painting. All necessary 3D files and multi color modifications are packed in “ready to slice”…
This trestle system allows for inclines and elevated sections of Fastrack. I have designed sections in 5mm (0.2in) increments. Combining this with 10inch sections of Fastrack will result in a 2% grade. It recommended to place a trestle at…
This is a hard print as it even failed on an industrial printer. You will likely need to scale up for a successful print. Print Settings Printer Brand: Stratasys Printer: Dimension SST 1200es Rafts: No Supports: Yes Resolution: 200 How I…
A perfect gift for your friends that are graduating! A dumb and silly gift. You can use a resin print for better details, but also a fdm printer works fine.
Just a couple graduation cookie cutters. printed in PETG. GCode is for all 4 cutters at once
This is a set of Viaducts that can be used with Marklin's Z scale track. It's limited to an oval configruation at the moment, but still pretty cool. This is an update to a previous design I made, which improves the clip used to keep the…
You will need to glue individual parts together.
After seeing these toys like this selling for way more online than they were worth I decided to try my hand at modeling them. If you like this model, let me know and I'll make the rest of the set. 6 models are included that are 3…
Otro archivo de pep fresco amablemente proporcionado a mí por Juan pena. Como siempre, compruebe que el tamaño se adapte a sus necesidades. Este modelo particualar es 1850mm de alto, Pero es necesario tener en cuenta la altura del casco y…
A simple cookie cutter
The Creeper Mask is a full-sized, adult Halloween mask that fuses angular sculpting with classic monster aesthetics. Designed to fit comfortably while maintaining a bold, menacing profile, it’s ideal for cosplay, costume parties, or…
A 2023 graduation keychain. Remix of cedarrapidsboy's keychains, https://www.printables.com/model/67236-assorted-graduation-keychains
A Adult False Hydra. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Easy to make a cute set of graduation keychains. You can customize with your name. I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Another Funny Sign - Being a Functioning Adult Every Day Seems Excessive Model is a multi-object file to make it easy to colour the text. (Select “Xray” view in the 3d viewer to see the text on the multi-object file) Smoothest results…
If you purchased an android headunit (Teyes, Mekede, Junsun..) for your vw golf you get a pair of usb ports. This adapter lets you mount those usb ports behind the gear shifter. I mounted mine just with friction but if you want you can…
This is a highly detailed satirical representation of the "arrest" moment, featuring the iconic grey tracksuit, tactical headset, and water bottle. The model was sculpted with a focus on realistic fabric textures, clothing folds, and…
Fit to my Mandolorian helmet and a Pyramex HPR541 Full Brim Replacement 4 Point Ratchet Suspension Link to the hard hat band https://amzn.to/3wPwxzR on Amazon "4 points full band" is the whole thing. 4 points no band" is the connection…
Large scale adult tooth models for teaching dental morphology. One file is half upper and half lower right side arches (clumped to get maximum prints on a bed), the second is the full set. These models have been created by scanning model…
A symbol of medicine, healing, and balance to life with this highly detailed Caduceus 3D printable model. Featuring the iconic twin serpents entwined around a central staff and crowned with wings, this model is designed to print cleanly…
Fun print! You should be able to get about 87% scale to print the helmet in one piece on a 256x256 print bed like the Bambu X1 I originally printed at 90% split into pieces but it was too large for 6-year old's head. The reprint at 85%…
This is my take of a remix of the wonderful work of Takman29 and his KUMATY polar bears The little bears are all grown up and graduated - collect the lot this is part one of the graduation collections Support needed for the bottom of the…
Viaduct rail compatible with BRIO and IKEA wooden rails. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini Straight Track - B2 Mini Straight Track - C2…
A 2024 graduation keychain. Remix of cedarrapidsboy's keychains, https://www.printables.com/model/67236-assorted-graduation-keychains and my 2023 version, 2023 Graduation Key Chain by ironfan72 | Download free STL model | Printables.com
Viaduct rail compatible with BRIO and IKEA wooden rails. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini Straight Track - B2 Mini Straight Track - C2…
Tlumič hluku přepadu pro mořská i sladkovodní akvária. Model je navržen pro maximálně jednoduchý tisk bez podpěr. Montáž je rychlá a intuitivní – stačí složit a nasadit na přepadovou trubku. Ověřeno dlouholetým provozem. Hlavní výhody:…
Radio Single DIN Headunit Blank
A nice gift to give to your frineds if they are graduating this year (like last year lol). There are 2 parts, the writing and the hat. I've made 2 parts so that the prints comes out better. you can just glue the hat to the writing. I've…
Reupload of Fractal Fidget Star by chuuckaduuck . Original description: The Freshest Fidget of 2021. As seen on my viral tiktok @chuuckaduuck the nested 8-pointed fidget star. Created St. Patrick's Day 2021. It's hypnotizing and addictive…
A simple 2026 Graduation Key Chain to honor all of this year's graduates. Prusaslicer will suggest the color change automatically, but you can manually add one at 3.2mm.
Grad Cap Decor used on boxes of desserts
Spoor 1 - Ketel BR01 (lading) / Spur 1 - Kessel BR01 (Ladung) / Gauge 1 - Boiler BR01 (load) Scale - 1:32 This load for Gauge 1 model railways is highly based on the boiler fitted to Deutsche Reichsbahn Baureihe 01 (Altbau) steam…
Material: PLA Printing speed 100mm/s Support No Plate adhesion No 15% filling
H0/HO Coal cargo / Kohle Ladung für Märklin Hochbordwagen size: 87x29mm 97x29mm 144x29mm remixed from https://www.thingiverse.com/thing:3200942 The dimensions are actually slightly bigger, they fit my Waggons qiuet nice with less wiggle…
2 different models for the BMW E39 M5 530I 528I 540I recomended to print in PETG because it can get really hot.
It's a simple graduation cap I designed as a gift for some friends of mine. The model is quite fast and easy to print, with no support needed if nicely oriented. It was designed to have this features, that I hardly found in other design…
I remixed the classic rude octopus to add a graduation cap with a little loop to attach the tassel.
For mobile layouts KATO’s Unitrack is the first and only choice in n-scale and one of the best track systems in general: https://unitrack.katomodels.com/what_is_uni_track The system includes viaduct tracks and as I have made a viaduct for…
A simple key chain for those 2025 graduates. Insert a color change at 3.2mm.
Custom version of the Digispark attiny85 BadUsb fake usb memory case. https://www.thingiverse.com/thing:2347216/remixes Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.12mm Infill: 20…
You can either print it as a single piece or print the trophy and the 2026 part separately to create the two-colored design. -- Update: I fixed the scaling of all the parts.
I needed a simple, clean toothbrush holder that would fit even the weird shaped toothbrushes for the kids, along with their toothpaste tubes and dental picks. I also wanted something that would minimize water pooling and dry out quickly,…
This is an N-Scale model train viaduct. I built this to be a wall mounted bridge. The bridge section is loosely based on the Vancouver Skytrain. For other components of my rail bridge, look up my profile. There's about 20 different parts…
Designed in Fusion and printed on a Mk4. Fixed the unit to a ¼ inch base which was cut out of a larger piece to function as a jig for easy alignment within a S1. Printed in PLA with 4 perimeters and 20% infill with input shaper. Support…
a cool dragon that took way too much time to make Category: Creatures
Keychain designed as trinkets for a 2021 graduation party. A few different versions with different text available. Fusion 360 file also available to make editing the text a little easier. Tip: Change the color at the text layer for a neat…
Pour pouvoir ajouter cette plage à mon décor, j'ai supprimé l'ancien pont ferroviaire et réduit une partie du relief, puis j'ai créé ce double viaduc. P.S. Le Tablier et les Arches sont une adaptation d'une réalisation qui n'est pas de…
Here are Piers/pylons for KATO’s viaduct track. Compared to original piers here you can find piers in 5mm steps up to a height of 120mm giving a smooth ramp to never reached heights of viaducts. The height is defined from ground level to…
Break-away supports included. This is a BLANK SLATE for you to customize!
I don't know what to say. We were looking for a way to embellish a small bottle of champagne that we gifted for a graduation and came up with a small hat. Should fit all bottles of champagne and similar drinks. I have printed it with…
This is a remix of Krafttrains' "Coal Load HO Scale". It has been raised and resized to fit three different Märklin wagons. Das ist ein Remix von Krafttrains "Coal Load HO Scale". Es wurde erhöht und die Größe an drei verschiedene Märklin…
1:87 Wagonladung Stahlrohr für H0 H0 Tubular steel
This is the perfect gift for someone who is going to be graduation this acedamic school year. Congratulate them with this keychain!
Bambulab ABL Widget V2 : Bambulab ABL Widget is a simple accessory that let you easily see Z axis movements up to less than 100µm. You can easily see how much Z axis is moving : when print head is shaking when print head is homing when…
I needed a Diploma for one of my next projects, so I created one, looking forward to all of your remixes ;) If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding…
A symbolic model of three stacked books with a graduation cap and diploma on top. A perfect decorative piece for celebrating academic achievements, education themes, or as a gift for graduates and teachers.
All of my files are FREE to download. If you enjoy my work, please consider supporting me on PATREON . By joining, you can ask me to create , or to modified your desired 3d printing model and help keep my creative projects alive and free…
I made this model to blank off a single DIN headunit slot to add switches and LED lights. It can be modified to add holes in CAD or you can drill them. I recommend 100% infill and PETG at a minimum for in-car parts. If your country is…
This is a remix of Granny Glasses by DoomMiester. These glasses are from the Bluey Episode “Here Come the Grannies!” and are the glasses that Rita wears. I made adjustments to the original model so that they would fit an adult properly…
Feel free to check out my website https://www.ar3dprints.com/ http://www.prusa3d.com/#a_aid=3090
I did not design the artwork. I modified it and made it for printing. I just wanted to have more decor for our grad party :) You can scale this as big as you want or that you can print, then adjust the width so it isn't so thick. The…
A 20-mm cube isn't enough to validate your Z-axis steps factor. The calibration should be done with taller test prints or otherwise an undetectable 2-3% error in the height of a 20-mm cube can translate into a very much obvious 2-3 mm per…
Should be fairly easy to print, highly recommend supports for all pieces.
The Archimedes Puzzle 3D Model is a fascinating and detailed design that honors the mathematical prowess of the ancient Greek mathematician Archimedes. It will take you on an exciting 3D printing adventure. This gorgeous and challenging…
Trim-away supports included.
I purchased .svg files for a graduation party we are having and decided to turn some of the images into cupcake toppers. I did not create the design, but made it into a cupcake topper by adding the “stick” part and other little changes…