CS:GO AK47 - Counter Strike (Decoration)
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
- Downloads
- 862
- Likes
- 82
- Rating
- 5
58 models
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Simple 2d design of the AK47.I will make more guns if you want to suggest them let me know in the comments.
This is a #3dp remix. This AK47 cover fits a Swann Morton scalpel. This is actually printable and looks really cool. </b> Credit for the original AK47 pen cover goes to u/Urbaxter: thingi Pen Cover Swann Morton Scalpel No. 3: amazon…
This is a AK47 that I made for Dummy 13 with more detail tha existing models. It has two versions, one with a stock and one without. Please post your makes, I like to see them + you get prusameters. Print on .1 layer hight with supports…
AK47-Kalashnikov - Автомат Калашникова образца 1947 года This is a AK47 keychain. It is easy to print It has details (there could be more, but I think it's enough for a keychain). no supports looks really nice How I printed it: PLA 0.1…
Глушитель на АК47 и остальные модели на дульную насадку, без резьбы. Печатается без поддержек. Category: Sport & Outdoors
Assembly Guide: TIP, Make Sure The Screw On The Blaster Is Tight Print Settings: Try and use the .3mf file instead of just the .stl, there are a lot of setting changes! Setting Changes (for .stl): Ironing, all top surfaces (FOR AK47_1…
Please click if you appreciate my work :) AK47 Bullet 7.62x39 mm 3part and 1part model Commercial License >> cults3d.com/:2847465
AK47/AK74/AR MAG 3X wallmount Bed organic supports recommended 0,2 layers
Railed front handguard for an airsoft AK47. Was modeled around my bulldog AEG AK47 so the fit may vary between models. Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: Yes Resolution: .2mm Infill: 15% Filament:…
Dummy 13 AK47 You need supports if you want this to print correctly Enjoy!
I modeled this hello kitty keychain for a friend of mine. Didn't pay attention to small details, but there are no imperfections at small scales.
Simple 2D CS:GO Weapons. Useful for keychain and wall art decoration. Upscale model if required.
Hierbei handelt es sich um einen Flash Hider, den ich angelehnt an den Originalen von der AK 74 entworfen habe. Dieser Flash Hider hat ein Linksgewinde von 14mm. Passt also auf alle Airsoftwaffen mit 14mm Linksgewinde! Print instructions…
Assembly Video coming soon…. Best for printing each part at 55-75 % scale. I have not tested each part on the bed, Im currently printing each part, some parts to make functioning it will take a few drill hole. for example… the…
material: HIPS orientace ve sliceru dle foto (s podpěrami).
Mount for DJI Action 2 camera. Some generic and specific versions are available (case only, GoPro mount, Apex Mount etc.) Print on the (right) side for better sturdiness. Specifications : Good camera protection (2.5mm walls) and bumpers…
great for storing your 7,62x39
Please download, like, and share a make! Untested but should fit the dimensions, picture coming when my printer is fixed. If you share a make let me know if I could use it for the cover, would be grateful. PRINT SETTINGS AT LEAST 50%…
Its a decoration AK47 . Print it in normal position.
***UPDATE 27.04.2026 -Added V2 of the adapter. It will automatically reset your "stop on empty mechanism". Big thanks to "Manamuner", member of the Heavy Recoil Club, who suggested, and tested it for me. ***UPDATE 08.08.2025 -Front Loader…
I haven't printed any because i don't have a printer but i would recommend to print the simple version.
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Miniature reproduction of the iconic AK-47 from the video game Counter-Strike, made of high-quality PLA+
Low Poly AK47 Lamp. The lamp in its pieces, when put together, measures 25" tall. hole measures about 1/4". The file that contains the magazine is actually 2 pieces. I didn't notice the magazine was not attached until it printed. Based on…
The source marked this model as adult content.
Works with plastic AK magazines. The prints are a better way to store firearm magazines on a multiboard. They allow easy installation and magazine retention. They will allow forward removal and placement of magazines. I print them using…
Náhrada poškozeného lučíku AK47 (CM522C). Po vytisknutí je potřeba nahřát a ohnout (R6).
Angel holding kalashnikov, you can use it as wall art or for lamps. Personaly used for wallart
A simple decorative keychain in the shape of an AK-47. The model can be easily customized by adding a negative part to create a hole for a key ring, clip, or other attachment.
This AK47 keychain is a miniature replica, crafted for durability and style. It’s an excellent project for 3D printing and is designed to be practical, lightweight, and visually appealing. It's my first time project so don't judge me. Key…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/LeonisModels I’ll be gradually adding colored profiles for the Mini…
Ak-47 keychain Material: ABS no brin / no suports layer height 0.2 / 0.3 nozzel 0.4 *ps (pt-br): você pode personalizar o tamanho no fatiador, usei (size: x-75mm y-28mm z-5mm);
Material: PetG Perimeters: 6 Infill: 50-100%
Buy me a cup of coffee if you like what I do : paypal.me/DavidBashaw992 Description Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite…
It's an AK47 originally made by @HatlikTheDesigner with attachments: silencer (based on PBS-1), sight (based on 1P87) and a flashlight. I printed it on creality k1c using PLA, 0,2 layer thickness, 2 walls, 15% infill Good luck to you, 3D…
a littele model of a ak47 can be uset to a key
!!!Not a real weapon!!! Hello, Today I have an Airsoft AK47 front sling eye for you. If you accidentally lost it or broke it. It fits perfectly! :-) The printing is quite demanding! Good luck with the printing! I used ABS/ASA as the…
Backpack for Team Mistral AK47 frame. Designed for TBS Tracer and TBS SMA connector. Remix from : https://www.thingiverse.com/thing:3843178 https://www.thingiverse.com/thing:4767603 Print Settings Printer Brand: Creality Printer: CR-10…
***UPDATE 27.04.2026 -Added V2 of the adapter. It will automatically reset your "stop on empty mechanism". Big thanks to "Manamuner", member of the Heavy Recoil Club, who suggested, and tested it for me. ***UPDATE 08.08.2025 -Front Loader…
Miniature reproduction of the iconic AK-47 from the video game Counter-Strike, made of high-quality PLA+
!!!Not a real weapon!!! Hello, Today I have an Airsoft AK47 front sling eye for you. If you accidentally lost it or broke it. It fits perfectly! :-) The printing is quite demanding! Good luck with the printing! I used ABS/ASA as the…
This is an AK47 wall mount. The mount locks into the magwell of the gun the same way a regular magazine does. On the bottom of the mount is a magazine holder that holds one magazine upside down. There are three small holes on the front…