Pip Avacado : Italian Brainrot
Pip Avacado : Italian Brainrot.
- Downloads
- 132
- Likes
- 12
- Rating
- 0
764 models
Pip Avacado : Italian Brainrot.
Hollow Maps of Australia and USA Made with tracing the inside onto paper in mind. Size: (over 100mm wide) X 1mm thick. Can be resized in you slicer. Layers: 0.2mm or less.
open the 3mf file as a project for pre-made cutout and filament changes
A double variant to the original WA gutter clip, allows for two lines of Christmas lights, Printed out of ABS for the heat here in Australia, have reduced the height of the clip to 8 mm instead of 10 mm, settings are as previous.
A quick fix for the quite horrible slippery design on the Metalia 57 57963/1,0 faucet. Initial sketch: Likes and downloads appreciated, It's hard modeling a part for a randomly curved faucet :D
Dr Raju - 90s ska band from Sydney Australia, 3d logo. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks. An improved model with colour added. 6 layers/colours. Note that the corner locating…
🇦🇺 Welcome to Australia! The Sydney Opera House is one of the world's most iconic buildings and a symbol of modern architecture. It is not only an icon of Australia, it is also our representative of Oceania in the Wanderlust Collection of…
This is my version of the Italian Business Card holder. Be kind with me, this is my first time using Microsoft 3D Builder for modifying STL. May the fun be with you.
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Welcome to the presentation of our incredible 3D keychain model in the shape of a coffee maker! This keychain is the perfect blend of functionality and style, designed for all coffee lovers and 3D printing enthusiasts.
Lirilì Larilà in high details Supports must be enabled, be careful while removing them around the tusks Dimensions: 55 x 35 x 60 (mm) I used around 17 grams of filament in total
This is a super fun print I made a bunch of these a test prints every time I get a new filament. If you have trouble with the feet coming during printing I recommend dropping the model .1mm into the build plate in your slicer it should…
iCiao a tutti! Data l'ultima challenge sul modello delle Air Jordan ho pensato di creare una lampada remix. Ecco poche semplice istruzioni per montarlo. STEP 0. Cosa ci serve??? Innanzitutto direi di partire da tutto l'occorrente per…
Bombardiro Crocodilo in high details Supports must be enabled Dimensions: 80 x 69 x 24 (mm) I used around 11 grams of filament in total
Together with its 7.7 mm variant, the 12.7 mm Breda-SAFAT was probably the most widely used Italian WW2 gun - mounted both in fighter and bomber aircraft and used as an AA and infantry support weapon. It was later used in post-war Spain…
Trallallero Trallallà 4 legs version is here. I printed in PLA with tree supports and it costed me 3.6 grams of filament.
Ti Ti Ti Sahur: Your Daily Dose of Italian AI Brainrot (Now in 3D!) 🍝🤖🧠 Ever felt that creeping sensation of your brain turning into a digital pasta dish after too much internet? Or maybe you've just been humming a certain Italian tune a…
Ma che dici? I've wanted to make one of these since the first time I saw the incredibly smart bobbleheads by 3D Printy . This contest was the motivation I needed. The hand comes from this model I've found on Thingiverse. The original 3D…
print the base with supports and the spring sideways
3d miniature of Melbourne, Australia! Collection of all my miniatures: https://www.printables.com/@jarvizar/collections/1124416 I have many other exclusive miniatures available for free on MakerWorld ! Slicing & Printing Details This…
Open Swords is a project that aims to make historical fencing available to anyone! The only tools you need to build one of these is a 3D Printer, a heat gun, and a screwdriver! With the settings below, and a 3/4in dowel from the hardware…
Capture the stylish spirit of Italian mobility with this 3D printable STL model of a Vespa Scooter. This iconic scooter model is perfect for enthusiasts of classic European design and city cruising, offering a charming piece for their…
Just a spaghetti portion measure with the iconic/stereotipical Italian hand gesture. Holes are for 1,2,3 and 4 typical servings (your “typical” serving may vary). Printing Nothing special to printing this. A color change is certainly…
Post a make if you print! I would love to see it. Clip for Australian L or P Plates, to clip to the side of your numberplate. Non-reversable but rock-solid. Recommend printing in ABS/ASA or PETG due to outdoor use but PLA will probably…
I didn't find a spaghetti measuring tool during a trip to the shops, so I decided to make my own. A simple design that's easy to print, use and store. Provides spaghetti portion measurement for 1-4 people. Print > Cook > Eat > Enjoy!…
master key for trollies in Australia, and is sized for a $2 coin
Like & download if you want to support me! :3 (Download now, print later!) You know that culture!
Inspired to my favorite italian brainrot! Do you know that culture too?? :D (Chimpanzini Bananini, has become one of the most well-known in Italian Brainrot) :) download and like if you want more free models like this!!
Replacement plug for a Westfalia tow bar to prevent dirt and debris from entering the socket.
Nemesis Retaliation board game insert/organizer using the core box and the sangrevore expansion box. The sangrevore box holds all the enemy miniatures. The core box holds everything else. The insert supports the following: core box…
Need an Australian $1 or $2 Shopping Trolley Coin? Well look no further! :D Simply print it out and add them to your keyring! Great to give to the family and friends. Dimensions: $1 - 50mm(L) x 25mm(W) $2 - 50mm(L) x 20mm(W) Printed at:…
🇦🇺 Welcome to Sydney! The Trains of the World Collection will feature some of the most iconic railways, from cities such as Paris, Tokyo, New York, London, Mexico City, Melbourne, Seoul, and more! This entry contains parts for assembling…
Some covers to fit standard Clipsal 2000 light switches common in Australia. There is some blank covers as well as some to accommodate a Tuya 4 way switch and one for the simple Tradfri Switch. Useful for stopping your not so tech savvy…
Capuccino Assassino the 3d model.
THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK THUNK…
This model is the skull of a 3 years old australian shepherd. It is built from a scan realized for veterinary purpose (the dog is alive and well). No bone anomalies where observed on the scan. Model generated from scan with the open…
Took the .step file from https://github.com/kiswitch/kiswitch/tree/main/library/3dmodels/3d-library.3dshapes for the Kaliah choc v1, I got the v2 .step file from…
Designed for use with Selle Italia SLR Boost TM Superflow (Small) specifically. The design utilises a slip in joint for the original Trek/Bontrager RT mount that comes with the light. There is also a provision to use an M5 Bolt for…
I liked andy_burke's idea for a coin holder, but when I printed a test print some coins fit and some didn't. So I thought it would be easier to just redesign my own one from scratch in Fusion 360. I decided to add a lid so that you could…
This is for Australian (and also Swiss!) Wheelie Bins. You'll need a hammer to tap these into place for a snug fit. Let me know if this works in your country and I'll update the description! Category: Replacement Parts
Diseño Thalia es una figura inspirada en el estilo anime, representando a un elfo de alta fantasía con detalles elegantes y estilizados adecuados para los amantes del anime y los juegos de fantasía. Uso Diseñada para coleccionistas de…
This 3D-printed bust captures the determined and fearless expression of Rocky Balboa , the underdog boxing legend who became a global symbol of perseverance. Sculpted with love and respect for fans of classic cinema and inspirational…
This is a set of STL-files that lets you print an Italian village for use in your game set from about 17th century to WWII. It includes a couple of houses, a modular set of a low stone wall and a modular set of a hedge.…
Simple dust cover for a combination of Anderson SB50 (50Amp) and 7 pin flat (Type 3) trailer plug (Australia/New Zealand). TWO models included - for 1x Anderson plugs and the cover for just the 7pin connector. For 12 pin plug version, see…
Classic Italian Arm Gesture :D Thanks to original model : https://www.thingiverse.com/thing:5849441
I made this for my son after the first Astrobot game. After the success of the new game I thought someones kids might al
Pasta comes in so many shapes that every meal is different. Pasta is affordable, versatile, easy to make and is part of a good diet.
Easy to print mini Italian gesture that fit in your finger, for those days that you feel extra expressive. PLA 0.2 layer hight No supports
A low Poly Version of the italian gesture that can wiggle.
Features Magnetic Modularity – Each tray uses 4× 6×3mm magnets (not included) to snap securely together. Build the layout you need—line them up, cluster them, or expand as your game demands. Sleeve-Friendly Fit – Sized to hold sleeved or…
Australian Shepherd Wall Art
Remix from https://www.thingiverse.com/thing:29821 https://www.thingiverse.com/rekrapd Just a different layout Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.12 Infill: 20 Filament: Creality…
AFAIK the most common Italian WW2 bomb, used in all of their bombers like the S.79, Z.1007, etc. Scaled 1/72 (assuming the real bomb was 130cm tall). I am not sure about the shape, perhaps looks slightly too slim compared to photos, but…
Thalia the Muse of Comedy, Lightheartedness, and idyllic poetry
Mount Panorama Circuit, Bathurst, Australia, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
An escapable trolley token based on the Australian $1 coin size. Plug it into the trolley coin slot, then squeeze the two little arms and retrieve it straightaway! The other side is actually a $2 coin! 💾 I've also included my Fusion360…
This project was inspired by those cool IKEA shelf to monitor stand hacks I've seen floating around, though this one is designed for us Aussies. It was cheap to make, super easy to print and I think it'll look great on any modern desk…
KMART Australia Pie Maker Pastry Cutter If you have lost the pastry cutter supplied, this is the file you are looking
Renault Clio II. / Thalia ventillation system one of the gear usually breaks. This is a replacement gear. Need some voltage reduction to not breake the 3D printed gear.
⬛ 🟡🟥 Welcome to Australia! 🇦🇺🦘 This model is a little different from what we usually do in MiniWorld3D. Instead of a landmark or famous building, this is part of a series of objects representing art & design of the world . Together, they…
Simple dust cover for a combination of Anderson SB50 (50Amp) and 12 pin flat (Type 3) trailer plug (Australia/New Zealand). THREE models included - for 1x and 2x anderson plugs and the cover for just the 12pin connector. For 7 pin plug…
This is a basic kit for a slot car. I took the shell, lightened it, removed the windscreen and made a buck for vacuforming the glass. I also provided a chassis based on my adjustable wheelbase chassis. It takes a standard pod, you could…
.stl and .f3d files included. I printed the 5cm version and it seems to work well. Both have tolerance of 1mm on all coins except 0.5mm on 2$ and 5c pieces. The 10cm tall version has added feet. Fusion 360 files included if you wish for a…
Remixed to suit the Australian Rangers and i also changed the size of the money holder to suit our coins. I removed the top lip to make it easier to print so it is a friction fit in the console now
Experience the blend of Italian style and exhilarating performance with this 3D printable STL model of the Lamborghini Gallardo. This stylish sports car model is perfect for automotive enthusiasts looking to display the iconic design and…
Australian Shepherd
Migrating from thingiverse https://www.thingiverse.com/thing:4362301 Original here https://www.thingiverse.com/thing:3797754 at that size, the original were quite weak and breaking easily, remix it to make the wall stronger. compared to…
This box has enough room for 7 days and one locking position to prevent the pills from falling out while carrying the box around. You can print the letters in a different color, but they are easy to read even if they are in in the same…
Animated mechanical "syringe action" handle style toy for Italian "Ma Che Vuoi" hand gesture. I recommend printing the hand part separately, to ensure optimum bed adhesion.
Pokemon Card created with manual colour change feature in Prusa Slicer Color Layers 0mm Yellow 0.5mm Blue 0.5mm White 0.5mm Black (Total Thickness 2mm) Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
Meet Cappuccino Assassino – the viral ninja coffee keychain! This iconic 3D model transforms a cappuccino cup into a stealthy ninja warrior, complete with dual katanas and a headband. Designed for fast, one-color prints, it makes an…
Experience the timeless allure of classic Italian sports cars with this 3D printable STL model of the Ferrari 308 GTB. This iconic model is perfect for automotive enthusiasts looking to showcase the elegant design and exciting performance…
tag @3dextrusion on instagram to be reposted!
3D model of Australia F1 track 2023 Scale to your desired scale and drop down the Y to get the desired height of the model.
Just a model I made of the Australian flag. There are two versions: massive and mini, which can both be printed with a colour change at the specified layers. Bottom layers: Blue Middle: White Top: Red
replica of WWII Australian Trench Knife
AU $2 Trolley Token. Use the new / improved “easy out” paddle version. Or if that doesn't work on your style of trolley the original, in either coin (if you are a rules stickler) and paddle forms, all with keychain holes. For maximum…
Got my hands on a BK1s but felt it looked too realistic so made this mod kit shroud has a thumbscrew knob that allows for tool-less removal; also has cross compatibility with the provided M-lok rails in the BK1S package body cover and…
Used spec documents, but no guarantee of accuracy. DO NOT USE IN LIVE ELECTRICAL OUTLETS - YOU DO SO AT YOUR OWN RISK. Reference model only. For use as a design aid for parts that have AU sockets and plugs.
Meet EVERY — one of the most iconic and beloved characters from the Italian Brainrot meme phenomenon! This quirky alien-like creature with expressive features, characteristic big eyes, and flying ears captures the essence of viral…
I love uploading car parts. Great fun altogether. Maybe some day it will be possible to download a complete Toyota Hilux 1:1 scale Hilux and print it from metal. Make sure you print the bottom part on it's side, I have included some 0.4mm…
I wanted to have the trophy to pair with my Daniel Ricciardo Italian GP 2021 Model Car. Can't find any model online, so I make one using 3 images as reference. The model is 100mm height in total. Since I don't have green and red filament…
This is a replica of an Australian picnic table which can be found in many natural parks all over the country. These picnic tables are of high quality and are very comfortable to sit at. They are constructed out of wood or of recycled…
Plasterboard cutout jig for Australian power points with notches to align with laser levels. Two small holes are 45mm apart to allow for quick drawing of 90mm holes. Print at .15mm, its thin enough that infill percentage has no real…
Meet Ballerina Cappuccina – the hottest Italian Brainrot trend of 2025! This iconic 3D model features an adorable ballet dancer with a cappuccino cup for a head, which took TikTok by storm with over 50 million views. Designed by…
A 6 swich and 3 switch gang plate for standard australian light switches. Print in glow in the dark for easier vision at night!
Model remixed from this thing: https://www.thingiverse.com/thing:3291623 The original 3D scan is a little messy, so I've cleaned it up using Blender, modeled a base on Fusion 360 and combined them together. It prints easily with no…
This is a snap on cover for a common light switch model in Australia (clipsal 2000 series). For use with smart bulbs with remote that require the light switch to always be left on. The .OBJ file is included so if any modification need to…
Albert Lake Park Circuit, Melbourne, Australia, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed…
Simple dust cover for Australian / New Zealand flat 7 pin trailer plug. Limits dust & moisture getting on the pins, however I also added some dielectric grease in the holes to prevent corrosion also. Remixed from…
Fits any barrel <16.2mm OD. Friction fits, elephant's foot will require post processing where barrel mates with muzzle. Reflex sight designed for Nerf mods tactical rails. Here installed on a Nerf Commander elite 2.0 , an economical…
Embrace the charm of a bygone era with this 3D printable STL model of the Vintage Fiat 500. This classic Italian city car model is perfect for automotive enthusiasts and fans of iconic European retro vehicles, offering a beloved piece of…
Hello, i've made a Sun visor clip replica with the exact same dimension of the original one. Will fit all type of Transporters, campervans, jokers, syncros and vanagons in general, i have a '85 joker Westfalia. Actually there are two…
Patreon - https://patreon.com/CosmicNimbusPrinting Cults3D - https://cults3d.com/en/users/CosmicNimbus Find Version 2 of this game in multicolour here: https://makerworld.com/en/models/569159 Hello ! I've been recently playing a game…
Replacement lock dust cover for Westfalia removable towbar. I found out that I had lost my dust cover when I last went to remove my towbar. Couldn't find it in stock anywhere so I modeled this up in OpenSCAD. OpenSCAD file included. Print…
Hello everyone! This is a 3D printable Nerf N-Strike Barrel that I have designed to closely resemble the Nerf Recon/Retaliator Barrel. I’ve always loved the look of the N-Strike line of blasters, and arguably the most emblematic part of…
This is an Australian Bull Bar for a Western Star 1/14 scale Tamiya RC Truck. This also includes the Western Star Grill modification which fits straight into the existing kit supplied grill. Instructions Print and assemble using 3/16…
This model reproduces a classic Italian State Railways (Ferrovie dello Stato Italiane) station building , designed specifically for N scale (1:160) railway layouts. The proportions and architectural details are optimized to fit seamlessly…
Remixed both models to a new one since i liked the outside from the first one, but it didn’t fitted my VW Westfalia Hook.
I have not printed this, but it looks good so 👍