182 models
A very fast print - it takes only 10 minutes - and you can make yourself or other HP fan happy! I recommend printing with 0.1 mm layer height. You can print it with any filament, I printed with PLA (mostly Prusament). Check out also my…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
An earring in the shape of the deathly hallows with an interior spinning Sorcerer's Stone. This model comes in 2 versions, one where the sorcerer's stone moves freely up and down (v1) and one where the sorcerer's stone is prevented from…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
Harry Potter deathly hallows themed bookend. Please like and enjoy :).
Tired of making the same old boring calibration cube? So was I, so I designed this cube to allow you to run a series of tests. Not only will you have the standard things you're looking for in a calibration cube, but you also get a few…
A keychain with the Harry Potter's Deathly Hallows emblem.
I made some Harry Potter styled Ornaments Three different Styles of the Deathly Hallows Symbol: Classic (NO support) Halfrund (silhouette of the elderwand) (NO support) Round. (fully modelled elderwand) (NEEDS support) Hogwarts Logo…
Deathly Hallows as a rotating print in place pendant. Print Settings Print it with a small nozzle / layer height to prevent as much detail as possible. A 0.4 mm nozzle is more than fine. Use supports on build plate only, they should…
I'm sure you are all familiar with this design by now, it's a remix of an existing model with an enlarged holder to accommodate for thicker phones, even with cases. Includes a cutout to allow a phone to be held whilst charging, making it…
Harry Pottter deathly hallows keyChain. Category: Organization
Wall decoration in the swallow shape, in the way of the porcelain that already exists in this type of design. The size is 18 cm and I've made it in two versions, one of which is voronoï to give it a lighter look and let the light through…
Harry Potter/Deathly Hallows Ornament. Printed out of PLA. 10% - 15% infill No supports
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…
The Lamp is easy to print but it must be assembled. The main design must be glued to the white diffusion plate (and the birds if you want). Inside the box you can put what you prefer as lights. Battery led stripes, wired or simple wired…
Summary This remix fixes two things the original did not address: needed to allow cable to pass up/down through hole(s) in surface to which the pulley is mounted, and the wheel itself was too large. Details @hedberg : thanks for the…
I designed this cute shopping cart coin with the Harry Potter Deathly Hallows emblem. Ho disegnato questo simpatico gettone per il carrello della spesa con l'emblema dei doni della morte di Harry Potter.
The Deathly Hallows Symbol Lucius Malfoy had in the one Harry Potter movie. I made this little model for my girlfriend so she has something she can decorate her christmas tree with.
Harry Potter Deathly Hallows Keycap printed with White and Black
Harry Potter, The Deathly Hallows
Made this simple model of the symbol of the three deathly hallows for my girlfriend. The inner ring is movable and the model can be printed in place. It's a must have for every Potterhead and goes great with your Harry Potter shrine!…
I printed the Harry Potter Deathly Hallows Table Lamp ( https://www.thingiverse.com/thing:5617018 ) for my wife. To cover the light outlets I created these diffusers in TinkerCAD. Printed with 0.4 nozzle in concentric printing, first…
Hello, I want to make bookmark for my GF and she really likes Harry Potter so i made this one. You have two models to choose, bookmark is 2mm thicknes and bookmark_thin is 1,5mm. If you like this model please leave like and comment…
I made a book holder from the movie harry potter from the logo of the deathy hallows without support line height 0.2 UPDATE 23 MARCH 2023: I made a 2nd version so that it remains more stable with the help of a book.…
This is the Deathly Hallows pendant from Harry Potter with a spinning ring. Instructions Just print without supports, the ring should spin right away. I've used black ABS in 0.15 mm layers. Category: Props
I designed this Christmas Balls with different Harry Potter related motifs. Everyone consists of the base and the motif insert. In my example pictures I painted the base red and the inserts in gold and it turned out really nice. I also…
Bookmark inspired by logo of Deathly Hallows from story The Tale of the Three Brothers - from Harry Potter books. Sliced in Prusa Slicer. 0.8 mm from Gembird Marble then replace filament 0.4 mm from Prusament Galaxy Black Print…
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
No special instruction is necessary. Printer: MK3S+ Layer: 0.2 mm Brim: yes Supports: No Nozzle: 0.4 mm
The Deathly Hallows symbol is a triangular mark used as a representation of the Deathly Hallows, three legendary objects that allegedly, if united, would make one the "Master of Death". The symbol consists of a vertical line, a circle,…
I made that candle stand as a gift for my wife, she loves HP motives, so its for all the same lovers:-). It makes effective shadow on the wall. Standard tea candle fits perfect. Its super easy to print. No supports needed. Because its…
Harry Potter and the Deathly Hallows Keychain
I designed this cute keychain with the Harry Potter Deathly Hallows emblem. Both beautiful and useful at the same time, because it is the size of a 1€ coin and can be used for the shopping cart. Ho disegnato questo simpatico portachiavi…
Found a picture of a pretty design, but I could never find an STL for one. So using Gimp I cleaned up the image, imported to Microsoft Builder, and created one! I plan to use it as a stencil to bleach the design onto a shirt using a light…
I looked for deathly hallowed earrings, but I didn't like the ones I found, so I remixed a design of my key ring to make it into earrings, the modification consists of making the hook ring smaller. Ho cercato degli orecchini con i doni…
Time stands still and memories carved in stone capture eternal paths of journeys that once were and always will be. Open source version of https://cosmicjubilee.com/designs/petrified-shallows/ - available to buy now! This tealight holder…
Harry Potter Deathly Allows keyring
The dogtag has enough room for a micro SD card or a little piece of paper to note your adress and phone number if your dog gets lost. The backside has two arrows and “PULL” written on it to indicate how to open it. Dogtag printed with…
Deathly Hallows pendant from Harry Potter. I printed the model with supports only on the printing mat or you can paint them in PrusaSlicer. I wouldn't speed up the printing too much because the stick in the middle might not work. I…
N’hésitez pas à partager vos fabrications. Printer brand : Creality Printer : Ender 3 Pro Rafts : No Brim : No Supports : No Infill : 15% Filament brand : Wanhao Filament material : PLA Filament color : Wood
squishmallows Star wars Baby yoda Grogu just look how cute and squishy he is in is little brown robe
Madau's original design worked great and was nice and strong, but when I got a CR-Touch probe I discovered they do not play nicely together. I removed a small piece to make room for the CR-Touch and that does make the bracket slightly…
Harry Potter-style bookend with floating illusion. The model is hollow inside for less material consumption. I printed it on MINI+ with 0,4mm nozzle and PLA. Print info Can be printed with 15% gyroid infill (model is hollow inside).…
45 RPM vinyl record adapter modeled after the Deathly Hallows symbol from Harry Potter series. Enjoy! 1.5" outside diameter, 0.25" inside diameter.
Beveled version of Deathly Hallows has an identical front and back face and is designed to be printed without support. Designed to be a novel link in a cosplay “Maester Chain”.
I wanted to use this case but the Pi wouldnt fit with the heat sink attached, so I added some room so it'll fit. With this kind of heat sink you no longer need the holder for the top of the case as the heat sink is tall enough. I also…
A pen with the Deathly Hallows symbol. You have to buy a Bic Cristal pen and remove the cartridge inside, and then insert it into the pen as soon as it prints. Una penna con il simbolo dei Doni della Morte. Bisogna comprere una penna Bic…
DISCLAIMER: I haven't printed this myself yet - I only created the STL. A ring depicting the deathly hallows symbol from Harry Potter. The ring has a diameter of 17.25mm and could be scaled to fit you. Print Settings Supports: Yes…
Made by a Harry Potter fan for other Harry Potter fans. Make your cookies a bit more magical with this cookie cutter.
Inspired from the Harry Potter Series, I've made a Deathly Hallows Book End as a decorative additive to your bookshelf. Quite sturdy for their size, I think you'll find these to be a great addition to your book collection.
This model was designed to raise the height of a Kallax-style unit by 18cm to allow for a robot vacuum and dock to fit neatly underneath. It comfortably provides sufficient clearance for a Roborock S8 dock. It comes with three holes per…
I had recently bought an elder wand so decided I wanted to make a stand I can stick to the wall. And just like that the “Harry Potter Deathly Hallows Elder Wand Stand” was born. UPDATE: v2 is half the thickness UPDATE 2: I have added a…
My class and I came up with this simple piggy bank with the Deathly Hallows Symbol on it. They love listening to the Harry Potter books during our daily read-aloud time so we thought this would be a cool design. There is not a coin…
squishmallows Minni mouse mickeys great love sins day one just look at that little bow on her head super cute
The original 1980s Stay-Puft Marshmallows logo!
This couple key chain/pendant was inspired by J.K. Rowling Harry Potter book series and movies. Parts are printed separately, then fit one another. Wand and triangle tolerances are 0,5 mm. May need some filing or sanding depending on your…
squishmallows disneys Nr 1 mouse Mickey mouse he and the rest of his buddys just begg to be printed in color or painted :p
The file can be printed with a 0,4 mm nozel and 0,2 layer height. I printed from PLA.
Just a fictional print of Deathly Hallows from the Harry Potter movie series.
Its a perfect bookmark for anyone who likes Harry Potter
This is a remix of a perpetual calendar on Thingiverse. https://www.thingiverse.com/thing:398403 Supports should not be needed.
A simple Harry Potter Deathly Hallows Keychain. Great as a gift, prints in under 15 minutes. Designed to print at 0.32mm layer height at 0.40mm layer width. At that layer height the layer lines really pop and with concentric top layering…
Easy Print no Supports needed. All edges are chamfered.
Version 2 - added mouse ears for better adhesion in the corners and wider outline. Easy to print. Hallows insert (and/or the white outlines) may be printed with luminescent filament for awesome effect. Printed with eSUN PLA+ No supports…
You can change the thickness (I recommend in 0.2 mm increments, for a 0.4 mm nozzle)to Change how stiff it is. It is currently 0.6 mm thick. 0.2 mm layer height
Made this to hold an elder wand that was 3D printed. Printed in PET-G on ender v3 KE setting maxed at 500mm/s and I think I had the stock extruder set to 27 or 30 mm^3/s so that may have caped actual printing speed. Also printed at .14…
A simple Deathly Hallows symbol with two small holes for a cord so you can wear it around your neck. I made the model for a bachelorette party. I then added the name to the lower crossbar using the Prusa Slicer. I printed it with Nobufil…
Harry Potter Bookstand - I printed it with my Creality Ender 3 S1. Made with Blender.
Harry Potter Theme sweatshirt beads
Open air computer case incorporating Remix of mATX motherboard tray ( https://www.thingiverse.com/thing:3722450 ) to fit Acer Veriton B75H2-AD motherboard (244 X 200mm). Mainly designed to allow for the use of a 2 slot video card (the…
This design is a Deathly Hallows style case for Bluetooth speaker Creative MUVO 2C. You need to have some skills with electronics, to rebuild the original speaker. I create a simple PCB for a change of switches and a micro USB connector.…
A bookend styled with the deathly hallows and basic Harry Potter symbols.
Remixed model Works on all adult crocs print with more than 10% infill for best results
Bookend dimensions: height 90mm, width: 100mm, depth 56.6mm
Harry Potter drawer pull I used 80% infill but works with 30% as well printed with supports
Add a touch of dark humour to your tea break with The Steeping Gallows — a practical tea-bag string holder designed to clip onto the rim of your cup. Simply attach the holder, loop the tea-bag string over the hook and let your tea brew…
Simple model to print in place. I printed with normal 0.2 layer height profile Does not need supports.
A modern gallows wall lamp with real wood and a vintage-style socket and light bulb. It brings warm, cozy light and wooden accents to your room. The main housing clips in place without tools and can be opened again later on by slightly…
A holder for SD cards, MicroSD cards and USBs. Both the thin USBs and the full size Type As. How I Designed This I took a lot of the design from these 2 Things: http://www.thingiverse.com/thing:931121 by IndaLight…
For Harry Potter Fans! Deathly Hallows Always sign. V1 : Simple sign Let me know if you need modification or etc. Have Fun!
I wanted an ergonomic handlebar grip that would work with bar-end shifters, but I couldn't find one. So I made this. It has a channel to allow the cable from the shifter to passthrough and is quite comfortable. Print in TPU with 10%…
I have printed the stand on its side for added strength of the weighted corner. Used infil of 10% and marbel PLA.
I designed these buttons for a child Harry Potter fan
Improvisation on a theme "Harry Potter and the Deathly Hallows"
squishmallows Star wars chewy look how fuzzy he is
Bring a touch of wizarding magic to your Christmas tree with Deathly-Hollows-inspired tree topper crafted for easy 3D printing and maximum holiday charm. This model was born after my wife—an unapologetically obsessive Harry Potter fan who…
Button designed as a Deathly Hallows symbol. Quick and easy to print with no supports and no bridges. If you were interested in commercially using my models you can check out my Patreon. patreon.com/3dprintree
This is a replacement/enhanced battery holder for the Spring Window Fashions battery holder for their powered window shades. The problem with the factory one is that it is designed to deliver 12 volts. Which is normally fine if you use…
squishmallows Disneys alladins best friend in the world Abu the monkey
This is a wall display for 3 wands. It was printed with multiple colors however can be done on one and painted.
original model from thingiverse by sanzliot July 28, 2017 Added the deathly hallows to the front
Two simple magnets inspired by Harry Potter. For the Deathly Hallows you can use house colors to print them in. Each one is made to waste as little filament as possible which is why the solid backing. If you'd like to help me out or have…
🎃 All Hallows’ Embrace – Vintage Halloween Hueforge Art Print 🌕 Celebrate the magic of October 31st with All Hallows’ Embrace , a bold Hueforge art print featuring ornate vintage lettering surrounded by grinning jack-o’-lanterns, swirling…
