GlamRocker Figurine
GlamRocker Figurine with servo in the back. also included the figurine without the servo
- Downloads
- 34
- Likes
- 7
- Rating
- 0
381 models
GlamRocker Figurine with servo in the back. also included the figurine without the servo
Did you break the battery clips on your Toyota HYQ12BDM key fob, making the battery pop out and rendering the key fob buttons useless? Don't spend hundreds at the dealership getting a new key, print this part in five minutes! This little…
This is a modified version of Official_Dino55's Glamrock Freddy Head model. I added a hinge for the jaw and widened the neck hole to make the model wearable. The hinges only require two skateboard bearings. Rubber bands can be added to…
Link to connectors https://www.printables.com/pl/model/488665-joints-for-fnaf-figures/files
'Making of' video: Stresstest your 3d printer by downloading and printing this tiny print-in-place Surprise Egg for free! Both the steamroller and the egg was each designed to be print-in-place without any need for support structures. The…
Link to connectors https://www.printables.com/pl/model/488665-joints-for-fnaf-figures/files Update 25.05.2023 -adding hinge holes to the Head file
This is an AIM-120C AMRAAM at its true size of 12 feet long. Scale in your slicer to what size you choose. I printed a 4ft tall, 1:3 scale model which I will be hanging from my ceiling, along with a 1:10, 14in tall version for my shelf.…
AMR DIY Steering Wheel Disclaimer: This project has reached end-of-life status and will no longer receive updates or ongoing support. All current and upcoming projects are now available exclusively through my webshop . PERSONAL USE…
Created a shamrock for some St. Patrick's Day decorations. Simple model made in Tinkercad with slight editing. Resize and print to your desired depth. I made the Z axis about 0.5 inch so it could stand up on its own. No supports needed if…
Print with supports on, since quite a bit will be floating 20 mm off your plate. Or flip the shamrock to be on the plate and most printers can probably handle it without supports. I printed with 10% infill… pretty much anything should…
A glamrock freddy figure bc Y E S
Link to connectors https://www.printables.com/pl/model/488665-joints-for-fnaf-figures/files Update 11.06.2023 -Addition of corrected files with joints assembly
This cosplay head is from the game "FNAF SB"
Swirly shamrock to stand on a table, mantle, or shelf for St. Patrick's Day. Prints face down and should be scalable to whatever size you desire to match your decor. The “Flat” version doesn't flare out at the bottom if you want to hang…
Now you can print the star of the show! This is a detailed, fan-art figurine of Glamrock Freddy , the leader of the band from FNAF: Security Breach . Unlike the others, Freddy is here to help! This model captures his friendly but imposing…
Print in place articulated flexi shamrock to play with or give as gifts for St. Patrick's Day. There's also a version that can be worn as a flexi shamrock necklace to add to your celebratory St Paddy's Day garb. Prints in place with no…
Flexi Articulating 4 Leaf Clover or Shamrock Keychain for St. Patrick's Day I wasn't a huge fan of the other flexi/articulating clover keychains I found on here, so I decided I would try to make my own. This is one of my first experiments…
Just for fun, some print-in-place shamrock garland to help get your home or office in the St. Patrick's Day spirit. Prints in place without supports. Printer should be able to print with 0.4mm tolerances for pieces to move freely right…
A tabletop shamrock i made for my office, while we were producing an irish themed game 🕹
head is hollow resize needed depending on bed size
Maqueta del Aston Martin de F1 2024
Well known czech railway vehicle
Update: Added 120mm fan version A revised version which enables 120mm case fans to be mounted as lid has been added. I ran this setup with a fan powered by the AK2 Plus board directly for over a week without any stability problems. Read…
Insert a pause to put in the fishhook earring. It will depend on your layer heights, so you will need to experiment. The earring loop has a diameter of 4mm. I would iron the top layer, unlike me!
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Sure, here's a brief overview of the 1930 steamroller "The Old Smokey" in English: "The Old Smokey," built in 1930, is a historic steamroller…
This is the shamrock design as a croc charm!
This model fits fairly snug in the 2018 Toyota Camry cup holder, but it easily fits in any of the other vehicle cup holders I have tried. The phone in the pictures is an iPhone 6 with an Otterbox case on it, but my Samsung Galaxy S10e…
Easy to print, no supports ✅ 4mm hole for keychain 🗝 For the best results, use matte filament 🔥 (or better yet, two-tone matte filament like mine). If you look closely at the clover leaf, you'll notice that the layer lines are not…
AIM-120A A scale model of the AIM-120A split into logical parts for easy printing Print instructions and assembly Print the different parts in your desired colors and glue them together. No need for supports. Dimensions Length: 458 mm…
Happy St. Patrick's Day!
Solid shamrock earrings for St. Patrick's Day, measures approximately 36mm x34mm. Grab your DIY jewelry kit and make some holiday earrings!
A keychain shamrock. There's also a model without the hole, so it can be used as a ornament.
Small shamrock book mark, use pause at layer to add the white border. Ender 3 Pro 0.12 layer ironing
Drum Key This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/gein53MpBsu Category: 3D Printing
🍀 Happy St. Patrick's Day! 🍀 These adorable, happy shamrocks can adorn your keys, as a keychain, or hang from your ears, as a pair of earrings! Are you interested in selling your prints of my designs? Join my Printables Club , and start…
Add supports 15% infill print in place
Spruce up your St. Patrick's Day table with this festive swirly shamrock napkin holder. Holds napkins or anything else you feel like placing within it. Sides A & B press fit together for me when printed on the Bambu X1-Carbon, but feel…
Mark your balls with some luck. 4 leaf clover shamrock style. Use a sharpie or similar. Ultra Fine point tip for the stem.
Designed with 1mm tolerances. I printed in PLA with either forest matte green or silk gold. Approximately 3.5" overall and ¼" thick.
☘ Knitted 4 Leaf Clover Shamrock Keychain ☘ Join my Patreon for a commercial license and more models! https://www.patreon.com/Smoggy3D
This shamrock / clover stencil is fun for St. Patrick's day crafts or whatever else you can think to use it for. Use this 6"x6" (152mm x 152mm) stencil for your making pleasure. Enjoy!
4 Leaf Clover Coin (Shamrock) created from the http://www.fontspace.com/fonts-n-things/clover-things font which authorizes personal use. Tinkercad file can be edited at https://tinkercad.com/things/fuayB1Vt4aY Experiment creating 3D…
These are simple shamrock-shaped glasses to show your St Patrick's Day Spirit!
Isolator for Hamradio Antennas
a simple model I made to give as gifts in ramadan, as well as a very simple holder
Halloween 3 Season of The Witch Skull Mask With Silver Shamrock Tag
I created this part because my cup holder separator failed on my 2003 Camry, mainly because of a small piece of plastic breaking out of the mounting hole that the tabs for the separator slip into. This part has longer pivot tabs than the…
Cute St. Patrick's Day T-Rex holding a shamrock. Print with PLA, no supports needed.
Introducing the perfect seasonal companion for Flexi Rex - a delightful 3D model of a Shamrock! Designed to complement Flexi Rex's playful nature, this charming Shamrock adds a touch of luck and whimsy to your display. Let your…
Print in place chainmail fabric prints with no supports, no brim, and multiple sizes to choose from! There are 15 different sizes from 2 x 2, up to 12 x 12, and various in between! Print with standard 0.2mm layer height and… 🍀 Happy St.…
Don't feel like making a trip to the dollar store? Print your St. Patty's Day bling at home instead! Why spend a couple of bucks on a lucky shamrock necklace when you can make one at home in just 8-10 hours. This is the perfect accessory…
If you like it, please give me a like.
This roughly 1/12 sized amraam missile takes model rocket engines. If you are putting the engine in the middle of the hollow missile to connect them, then make sure to either print in ABS or line the inside of the rocket with aluminium…
As I don't like rubber bands, I looked for an alternative solution for this.
A replacement air vent tab for Toyota Camry 2002 - 2006. Installation. Just push it on to the vent, then push up the blade up to click it into position. Not sure if that made sense. Print instructions Print it "sideways" so that the…
It’s time to eat! This is a detailed, fan-art figurine of Glamrock Chica , the energetic guitarist and pizza enthusiast from FNAF: Security Breach . This model is provided as a single-color STL, designed to be a perfect project for any…
A 'stand-off" scale model of the USAF AMRAAM missile. I designed this for use with scale RC model Aircraft. I have included the .step file so you can modify it to add mounting rails specific for your aircraft. This model scales wells and…
Make way for the winner! This is a detailed, fan-art figurine of Roxanne Wolf (Roxy), the fierce and competitive wolf animatronic from FNAF: Security Breach . This model is provided as a single-color STL, designed to be a perfect project…
Lense Hood for Tamron A005 70-300mm (62 mm). Hood may be mounted in normal position for use, or in reverse position for storage. Has detents which click on the small bumps in the lense's hood mounting tracks. I no longer have an original…
The STEP file contains three sperate objects which are separated by a small (0.2mm) gap. When printed separately they nest together for me with just enough friction to not slide out. I printed the inner and outer in a forest-green PLA and…
This is a lens hood for a Tamron A17 (ref. DA17), 70-300mm lens with Macro mode. I bought a camera that came with this lens, and didn’t come with the hood, so I designed one in Fusion 360. I designed it from scratch, as I didn’t find any…
Shamrock Charm for Necklace or pinned to outfit. 2.5 inches in Diameter Original model at thangs.com: https://social.thangs.com/m/778785 Category: Other
Print per the original design, the eyes STL will need to be printed with supports.
Toyota Camry, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
made for the wife's baking business. She wanted a larger stem than what she could buy.
Shamrock display for St. Patrick's Day.
Materials used: - 4 M3 insert (OD 5mm , Length 5mm) - 4 M3x30mm screws - 5V fan and 2 pins (25mm thick) - 2 pieces of 6x3mm sealing tape for the base (3 mm high to help cooling and serves as anti-slip) -40x40x11mm heatsink (you can keep…
This is a set of two printable Ramrods, one for the Talon Claw and one for the Caliburn. These are printed flat to improve durability compared to vertically printed Caliburn/Talon Claw Ramrods. When installing, have the side of the ramrod…
Designed this good luck pig as a present for my family and some friends just in time for new year's eve. I printed this in grey PLA and painted it with acrylic paint. I made a 9mm hole for some gift ribbon and labels with PrusaSlicer. The…
A model of an air to air missile, the AMRAAM (AIM-120), made by me :)
A suitable 3D model for a top speaker mount for a Camry with center holes measuring 50mm can be described as follows: Mount Design: The mount should be designed to fit securely on the top surface of the Camry's interior, allowing for easy…
🍺⚽ 🇮🇪 Celebrating St. Patrick's Day 🍻🍀💚🧡 Print this decoration and hang it on a door or wall This disc has a Celtic knot design of a 4 leaf clover. It comes with hoops so you can tie a string, connect it to the small 3 leaf shamrock, and…
Shamrock cookie cutter for St Patrick's day
Homemade steamrunner mini for Star Trek tabletop RPG.
Halloween 3 Season Of The Witch Pumpkin Mask With Silver Shamrock Tag
3 piece Shamrock earrings for St. Patrick's Day. Printed with .6 nozzle, but a .4 would be better for detail. Buy a jewelry making kit from somewhere that has the ring links, or make your own!
Fits 2001-2006 year model with alloy wheels. Printed PLA+. Tight fit, press in then give a light kick.
The 24mm(.9 inch) shamrock earring\charm size can be printed in around 7-11 min depending on your speed settings! Can be resized to any size within the slicer, no 3d modeling or parametrics required! No supports needed, but 5mm brim is…
MODEL DETAILS A St Patrick's day themed model with some hidden details! There are some challenging overhangs and detailed parts, but it is designed to be printed without any support material. If you liked this model, why not try out our…
UPDATE: I uploaded the wrong file and it didn't work for vase mode. I've now uploaded the right one :) Sorry! ----- Messing around on Make My Vase, I decided to make something for the upcoming St. Patrick's Day – a vase with a secret!…
General The 25mm version is compatible with 1 inch cable grommets as shown in the picture below as well as M25 cable glands. But you can use the blank plate to remix your own version if you have different needs for your car 😄 The gasket…
Infil 100%, 0.15mm PETG, supports - yes.
This is a replacement hook for the trunk organizer for a 2010 Toyota Camry. It should fit 2009 to 2017 models though? It uses a 25mm x 5mm wood screw (1" x ¼" is fine too) to splay the fingers. I printed it in PLA+ but it would probably…
Clover Keychain This keychain is perfect for personal use or for a gift to others. Dimensions: 61.84mm (H) × 58.55mm (W) × 12mm (D) Note: These dimensions are from a top down perspective Why You'll Love It: ✅Quick & Efficient Print – Uses…
Design found in 3D Warehouse Category: Buildings & Structures
This is a ring that was made to be more comfortable and cool weight covers for the Ringchaku fidget toy.
Glamrock freddy z FNAF Security breach
Celtic Shamrock Coin 2 inches in diameter Category: Other
Now you can print your very own Glamrock Freddy! This is a detailed, fan-art figurine of the star animatronic from Five Nights at Freddy's: Security Breach . This model is provided as a single-color STL, designed to be a perfect project…
A figure holder is recommended if the figure is to stand
This model is not my original creation. Unfortunately, I am unable to provide a source of origin.
Englisch: These are sticks with the clover leaf symbol that can be used in a flower pot or as food sticks. Deutsch: Das sind Sticks mit dem Kleeblattsymbol die man in einem Blumentopf oder auch als Essensticks verwenden kann.
Happy St Patrick's Day! Update 2024-02-23 I added more preset hinge clearances for this print-in-place design. They range from 0.1 to 0.6 and should provide plenty of options. If you wish to scale things up in your slicer, you'll want to…
A very functional pen-holder in time for St. Patrick's day. Print it in 3 perimeters or higher. happy printing! :) Lá Fhéile Pádraig sona duit.
A tabletop camera roller for getting smooth, panning shots at low angles. Adjustable steering angle from -45 to + 45 degrees. I haven't tested it to max capacity, but it's handled my Sony FX3 with a pretty chunky lens (Sony FE PZ 28-135)…
printet this in two colours.. temp. change green and pink.. original design had only 3 leafs (Irish thing). i needed 4 leafs for good luck.. please press Like, before you print this.. Need money for filament, so if you can & will donate a…