Search results: astra

Sort order

269 models

P
PrintablesKalleKnall

OPEL Astra J washer fluid reservoir cap / Wischwasserbehälterdeckel 13227300

To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Just printed in PETG orange / black. To hold the cap down i insert two magnets (4,5mm x 1,5mm x 9,5mm). MMU…

Downloads
1,632
Likes
146
Rating
4.88
P
PrintablesMZ4250

Astral Exploration Ship

The MZ4250 Astral Exploration Ship is unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast. ©Wizards of the Coast LLC. Want…

Downloads
1,457
Likes
168
Rating
5
P
PrintablesJohination

OPEL Astra K Handyhalter / Phone Holder / Redmi

Remix with "Opel Emblem" "Astra K Innovation" lettering and suitable for my REDMI NOTE 10 PRO including rubber case. Also add a file WITHOUT the "Astra K Innovation" lettering Print Settings: Supports: Yes Resolution: 0.2 - 0.3 Infill:…

Downloads
1,047
Likes
60
Rating
4.8
P
PrintablesZenfunk

Replacement Cover For Headlamp Washer Opel/ Vauxhall Astra H

I ran into some snow in winter and lost the right cover of my headlamp washer. There seem to be two versions of washer covers out there and when I ordered a replacement, I always got the wrong one. 3D printing to the rescue... It was…

Downloads
756
Likes
54
Rating
4.33
P
PrintablesIvan23

Opel Astra H, Zafira roof cover

Filament: color fabb PETG/ASA Infil: >50% Support: yes Resolution: 0.2

Downloads
729
Likes
51
Rating
4.75
P
PrintablesFerenț Eusebiu

Cup Holder Opel Astra H

The diameter inside is 61mm. Printed using PLA and it holds up over time!

Downloads
628
Likes
40
Rating
0
P
PrintablesKalleKnall

OPEL VAUXHALL Astra J OPC / VXR Key Button Inlay

After some Years, my OPC Key Buttons went away. To save the Key, i've desigend a new Inlay. Printed in TPU - works greate ! No clue needed ! DualColor MMU printable Print instructions I've printed the part on the textured Prusa Sheet to…

Downloads
615
Likes
38
Rating
5

Lionel Fastrack Compatible Graduated Trestle - O Gauge Train Track Bridge

This trestle system allows for inclines and elevated sections of Fastrack. I have designed sections in 5mm (0.2in) increments. Combining this with 10inch sections of Fastrack will result in a 2% grade. It recommended to place a trestle at…

Downloads
614
Likes
83
Rating
5
P
PrintablesDarkSunShine

Opel Astra H Heater Mix Flap (Mischklappe ) repair adapter (2004-2010)

How to diagnose a failed heater flap: There is no hot air blowing from the HVAC in the Astra, First checked the coolant in the engine, if there is none, you might have a bigger problem. Check if the the mix flap solenoid is working by…

Downloads
608
Likes
21
Rating
0
P
Printablesnorbimakes3d

Opel Astra H/Zafira B roof rack cover

It must be printed with ASA for proper UV and temperature resistance. Use supports on build plate only. At least 50% infill is required.

Downloads
585
Likes
53
Rating
5
P
PrintablesB o |3 |3 0

Opel Astra H 2006 Window lifter button

Window lifter button for Opel Astra H 2000-2006 Printed in pla it didn't last long, I had it printed in resin from a friend and it has been working for 2 years

Downloads
535
Likes
32
Rating
0
P
Printablesfrancesco

porta cellulare Opel Astra J

Porta cellulare per auto. Design per Opel Astra J le due braccia laterali che tengono fermo il cellulare possono scorrere nel body per adattare la lunghezza del cellulare utilizzato.

Downloads
511
Likes
46
Rating
0
P
PrintablesDAMorganWilkins

Vanity/Mirror Cover for Astra

Update 03/09/2023: I have added a new version, v.16, which removes some of the additional tolerances I added to accommodate ASA warping, in order to reduce stress on the pins on the side of the model. This version is designed to be made…

Downloads
500
Likes
34
Rating
5
P
PrintablesDen

Opel/Vauxhall Astra G Keychains

Opel/Vauxhall Astra G Keychains. Hatchback,Cabrio,Van,Caravan(wagon) and Coupe design.

Downloads
493
Likes
49
Rating
5
P
Printablesjrabkid

Kindle Fire Tablet 10 Inch (Kids) Headrest, Car, Vehicle Mount, Vauxall, Opel, Zafira B, Astra G

Kindle Fire Tablet 10 Inch (kids), Headrest, Car, Vehicle Mount, Designed for Vauxall/Opel, Zafira B, Astra G It may fit other vehicles with similar spacing of headrest posts. Printed in ABS to allow for a little shrinkage. I wouldn't…

Downloads
479
Likes
96
Rating
5
P
PrintablesDrSchiduwi

Smartphoneholder for Opel Astra K

Deutsch: Ich habe das Model mit Fusion 360 gemacht. (Part 2 ist editierbar) Es wird zusätzlich eine Handyhalter für ein Kugelkopf benötigt. Kosten zwischen 2 - 8€ je nach Ausführung. Part 2 wird einfach in Part 1 Gesteckt, bei mir wurde…

Downloads
456
Likes
34
Rating
5
P
PrintablesMartin

Krytka OPEL Astra

Stredová krytka kolesa.

Downloads
392
Likes
38
Rating
5
P
PrintablesHi_im_Fanja

honkai star rail- astral pass

make sure to play around with irnoning and nozzle sizes, i made some mistakes but they mede it look better

Downloads
377
Likes
52
Rating
5
P
Printablesiamtibis

Vaccine vial holder - (Pfizer BioNTech / Moderna / AstraZeneca)

Vaccine Vial Holder for PfizerBioNTech vials based on model created by: Ales Padrta and Zapadoceska Univerzita for hospital in Rokycany (…

Downloads
346
Likes
32
Rating
5
P
PrintablesJohination
Downloads
342
Likes
33
Rating
4.5
P
PrintablesHUPIcio
Downloads
337
Likes
32
Rating
0
P
PrintablesLukáš

iqos astray

iqos astray

Downloads
308
Likes
24
Rating
5
P
Printableskoen

OPEL Astra J washer fluid reservoir cap 13227300

To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Printed in PETG The frame STL is identical to the original, only the lid has modifications.

Downloads
305
Likes
24
Rating
5
P
PrintablesMartin

Old Opel Astra sun visor holder

Intro: This part is for the older opel astra models and it's the holder of the sun visor. After a few years they tend to break. I replaced this part for a friend. I reduced only one detail, because it was not necessary and not easy to…

Downloads
301
Likes
25
Rating
0
P
PrintablesDenis Heiber

Opel Astra J ashtray hatch

Hatch for ashtray/compartment behind gear shift for Opel Astra J, there is place for 2mm magnets to prevent opening

Downloads
286
Likes
33
Rating
0

Opel Astra wheel rim cap

I created this hubcap for my Opel Astra Print instructions I used PETG material I used support material

Downloads
278
Likes
25
Rating
5
P
Printablesk scale models

M1A Astray conversion

This is a conversion for the HG M1 Astray into the space-based counterpart from Gundam seed MSV and Astray manga. The rifle does fit the normal hand, however, I have made my own with a wrist joint to help with holding. Category: Model…

Downloads
270
Likes
31
Rating
0
P
PrintablesJohination

OPEL Astra K Armlehne Einsatz / OPEL - VAUXHALL Astra K Armrest shelf

original files from: https://www.thingiverse.com/thing:3114789/files I successfully split the original USB connection from the car to 2 USB sockets with these components →…

Downloads
262
Likes
32
Rating
4.4
P
PrintablesMeatShield

Astra Militarum / Imperial Guard Order Token

For V2 i deepened the holes for the lettering to make it easier to read. The tokens themselves are rather large, i recommend scaling them to 20-25mm. V3 has been updated to have more orders on a diagonal to be farther from the edge.

Downloads
253
Likes
6
Rating
4.5
P
PrintablesROSIO

Opel ASTRA H tlumič

Designová náhrada originální krytky šroubu tlumiče pro Opel Astra H

Downloads
250
Likes
30
Rating
5
P
PrintablesTomTLC

OPEL ASTRA / VAUXHALL FLEX ORGANIZER TRUNK/BOOT HOOK

This is a model for GM/Opel/Vauxhall flex organizer hook. Best printed from hard TPU. Or use PETG/ASA/ABS 25% infill should be enough

Downloads
245
Likes
13
Rating
0
P
PrintablesSatyr

Opel/Vauxhall Astra G Silhouette pack

As in Summary. It’s silhouette pack of: Astra G hatchback 3 door Astra G hatchback 5 door Astra G sedan Astra G combi Astra G panel van in 2 “heights” (it‘s technically width). 1,2mm great for wall 15mm stands by itself routhly 15cm I’m…

Downloads
242
Likes
26
Rating
5
P
PrintablesMatyáš Flek

astra valorant

this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing

Downloads
240
Likes
21
Rating
0
P
PrintablesIRaptor

Front Door Speaker Adaptor Astra H GTC (165mm)

Front Door Speaker Adaptor Astra H GTC (165mm)

Downloads
239
Likes
9
Rating
1
P
PrintablesDennis

Opel Astra H H7 Led adapter 16mm

Adapter to fit a led light into an Astra H. Currently I use one printed with PLA and 15% infill. The heat from the led light won't affect the adapter (yet). To be sure, print with a more heat resistant filament. For the best fit in the…

Downloads
225
Likes
21
Rating
5
P
PrintablesChill_Crafter99

Opel Astra H, Corsa D Außenspiegel Stellelement (Gewindetrieb)/Vauxhall Tilt-Pin/GM 13141998

Ein Ersatzteil für den Gewindetrieb eines Spiegelstellmotor des Opel Astra H (Corsa D). Für den Druck sollte ein SLA Drucker verwendet werden. Da die einzelnen Segmente das Gewindetriebs im Überlastfall überspringen können müssen, wurde…

Downloads
225
Likes
19
Rating
0
P
PrintablesJOGIAREA

Opel Vauxhall Zafira B Astra H Armlehne / Armrest

Ersatzhebel für Deckel der Mittelarmlehne eines Zafira B oder Astra H Material sollte PETG oder ABS verwendet weren PLA nur bedingt (funktioniert aber bei mir schon einige Zeit mit PLA) Support nicht notwendig (maximal unter dem…

Downloads
221
Likes
18
Rating
0
P
PrintablesPomidorowyKrul

Opel Astra Rear Compartment Side Trim Panel Clip GM(13310144)

Opel Astra J and K and maybe more read compartment side trim panel/ Trunk Side Trim Retainer GM (13310144)

Downloads
212
Likes
21
Rating
4
P
PrintablesDen

Opel/Vauxhall Astra G OPC Keychain (Side view)

It's a Opel/Vauxhall Astra G OPC Keychain from side view.

Downloads
208
Likes
26
Rating
0
P
PrintablesРадиша

Water bottle cap for wipers OPEL ASTRA H

Water bottle cap for wipers OPEL ASTRA H Filament TPU Printing on prusa MK4 100 % infill

Downloads
201
Likes
33
Rating
5
P
PrintablesMendelMax

OPEL Astra K Armlehne Einsatz Mod / OPEL - VAUXHALL Astra K Armrest shelf Mod

I removed the split compartment in the front and the hole for the USB cable. I have my wifi dongle for the Android car in the arm rest, hence my USB is used anyways and I don't need to feed the cable through and I have the option of…

Downloads
197
Likes
29
Rating
0
P
PrintablesA Regis

FasTrak Flex Suction Cup Mount

A suction cup mount for the FasTrak Flex (2022). Easy access to adjust the number of riders. I recommend 3 walls at 20% infill. If you're in a hot area, I recommend PETG or don't leave it out in the sun. Worked perfectly with the 20mm…

Downloads
197
Likes
12
Rating
5
P
Printablesomnifarious905

Lady Maria of the Astral Clocktower Miniature (Bloodborne The Old Hunters Fan Art)

"A corpse should be left well enough alone." Out of all the five bosses from the DLC, I think Lady Maria was the most challenging to sculpt. It's simply the level of detail in her clothing that did it. Unfortunately the last week for me…

Downloads
195
Likes
29
Rating
0
P
PrintablesJohination
Downloads
187
Likes
12
Rating
0

Opel astra H armrest clip replacement

Good replica of the opel's armrest clip

Downloads
183
Likes
16
Rating
0
P
PrintablesThoughts On

Opel Vauxhall Zafira B Astra H Armlehne / Armrest as screw-on

The original file "Opel Vauxhall Zafira B Astra H Armlehne / Armrest by jogiarea" looks 100% like my broken off original 2010 Zafira armrest clip. That is very impressive, as it is a quite 3-dimensional design! Unfortunately, when I…

Downloads
174
Likes
9
Rating
0
P
PrintablesReProps

Astral Pulse (mecha man dispatch)

I'd suggests using a thin piece of clear plastic for the glass instead of printing it. split in parts Category: Props

Downloads
171
Likes
28
Rating
0
P
PrintablesBłażej

Opel Astra Phone Holder

For phones with a length of 16 cm.

Downloads
170
Likes
14
Rating
0
P
PrintablesKrux

Opel Astra H antenna seal

Change without unscrewing the antenna. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.2 Filament: Plastika Trček TPU Category: 3D Printing

Downloads
169
Likes
22
Rating
5
P
PrintablesReconOwl

Opel/Vauxhall Astra J Car Floor Mat Clip

This custom-designed 3D printed floor mat clip is made specifically for Opel Astra J models. It fits perfectly into the original mounting point and securely holds the floor mat in place. 3D printed clip for Opel Astra J. Fits the original…

Downloads
167
Likes
10
Rating
0
P
Printablesmpbzh

iPhone MagSafe dock for Opel/Vauxhall Astra G

A MagSafe Dock for the new iPhone 12 devices designed for the Opel/Vauxhall Astra G. The dock replaces one of the vents in the center console (if flipped, you could probably also replace the vent left of the steering wheel). The MagSafe…

Downloads
165
Likes
19
Rating
5

Opel Astra Phone Holder (for phone in etui)

I've designed this holder to be more suited for a smartphone in a case (etui) which makes it quite thick. It is easy to place and remove. If you need to make this holder more suitable for your phone, you can simply scale it a little bit…

Downloads
157
Likes
13
Rating
0
P
PrintablesJayBird_25

Lionel Fastrack Railroad Crossing

This is a railroad crossing created for the Lionel o-scale Fastrack system. Use superglue to glue the parts onto the track. Printing Instructions (Standard): I recommend PLA with 0.25mm layer height, <5% infill, 2 walls, and organic…

Downloads
156
Likes
26
Rating
0

Fastrack Clip (O Scale / O Gauge)

A small clip used to hold pieces of O scale Lionel Fastrack together.

Downloads
151
Likes
22
Rating
0
P
PrintablesHoL9000

Opel Astra Flex Organiser - hook

Plasic hook for Flex Organiser system in Opel Astra. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: Prusament PETG Signal White Notes: I used Prusa slicer defaut settings…

Downloads
149
Likes
14
Rating
5
P
PrintablesManuelW

Brillen Etui Opel Astra

Ich habe den Haltegriff auf der Fahrerseite meines Opel Astra durch ein klappbares Brillenetui für die Sonnenbrille ersetzt. Innen habe einfach etwas Stoff eingeklebt. Gedruckt in PETG Federn 0,7mm x 528mm x 8mm ( Amazon )

Downloads
149
Likes
15
Rating
0

Honkai: Star Rail Astral Express Ticket

Astral Express ticket from the game “Honkai: Star rail”, for keychains, cosplay or badges. Just be sure to attach a pin or something similar.

Downloads
146
Likes
12
Rating
0
P
PrintablesIvan23

Opel Astra H opc keychain

Opel Astra H opc front bumper keychain

Downloads
145
Likes
13
Rating
5
P
PrintablesKuba Šlehofer

Opel Astra F poklička (hubcap)

poklička pro alu kola na Opel astra F tisknuto v ASA pod úhlem 45°, majitel je následně bude lakovat. seděly na první dobrou :)

Downloads
144
Likes
12
Rating
0

Lionel FasTrack Compatible Bumper - O Gauge

Tired of your trains running off the end of your track? Install these bumpers today. These bumpers are compatible with Lionel O scale Fastrack.

Downloads
143
Likes
25
Rating
0
P
PrintablesSchlossbauer

Astradaemon

A Astradaemon. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games

Downloads
141
Likes
27
Rating
5
P
PrintablesStefan Petkovic

Opel Astra G reverse camera mount

Printed in PETG. Orientation should be laying flat, thats how i did it. Tested on a car for more then a year.

Downloads
140
Likes
13
Rating
0
P
PrintablesS.Eisenhut

Astra J headlight cleaning system nozzle holder 13258411 13258412

Astra J headlight cleaning system nozzle holder with the part numbers 13258411 and 13258412

Downloads
135
Likes
2
Rating
0
P
PrintablesDanuvius

Opel/Vauxhall/Holden Astra H Ash Tray Insert

Ash Tray Insert for Opel Astra H. I wanted to monitor the battery voltage and Coolant temperature in my Opel Astra H, so i designed this model to replace the Ash Tray with a nice little Screen to show me this information. I used this…

Downloads
128
Likes
27
Rating
0
P
Printablespaulo pereira

Air vent fins for Astra F

Air vent fins found in the Opel/Vauxhall Astra F. These models have slight modifications to the originals to make them print better. It is recommended to avoid PLA and print in PETG with solid infill. The “airVentBar” part is better…

Downloads
121
Likes
13
Rating
0
P
Printablesiuri

Sun visor clip for Opel Astra

Works with the original screw. Can be printed as is, without supports. Recommended print settings layer height: 0.15 mm infill: anything above 15% should do perimeters: 3 supports: no

Downloads
116
Likes
8
Rating
5
P
PrintablesPandaStudio

inspired by Opel Astra H - keychain

Stylish inspired keychain designed in the shape of a car front. Perfect for car enthusiasts, this keychain keeps your keys organized while adding a touch of automotive style. A great accessory for everyday use or as a small gift for…

Downloads
111
Likes
10
Rating
0
P
Printablesdarkhemd

Astra L Keychain

A quick draft of the current Opel/Vauxhall Astra L with the step-File if you want to change something.

Downloads
111
Likes
8
Rating
5
P
PrintablesAlex Hondros

Vauxhall/Opel Astra K - Phone Holder

This is a Phone Holder for Opel/Vauxhall Astra it has been tested and fitted on the K series 2016 model.

Downloads
108
Likes
3
Rating
5
P
PrintablesKalleKnall

OPEL Astra J OPC / GTC / VXR Flatblade adapter rear wiper / Heckscheibenwischer

Adapter to put a BOSCH A 332 H flatblade wiper on my OPEL ASTRA J OPC. Prusament PC Carbon (fits best in color) / PC / PETG / ASA needs only a small support structure under the connection part to the arm.

Downloads
108
Likes
21
Rating
0
P
PrintablesJayBird_25

Lionel Fastrack 10in Straight Section Reference

This is a Lionel O-Scale 10in Fastrack straight section reference that I use for making track accessories. I have also included the sketch dimensions I used if you're curious. Find more of my model train prints in this collection , many…

Downloads
108
Likes
12
Rating
0
P
PrintablesDen

Opel/Vauxhall Astra G Sedan Keychain

Opel/Vauxhall Astra G Sedan keychain from side view.

Downloads
107
Likes
14
Rating
0
P
Printablesecheng

FasTrak Flex and Flex CAV suction-cup enclosed window mount

This is a sleek window mount for the FasTrak Flex and Flex CAV with protruding passenger-count wheel. It is designed to work with (qty 3) 0.8" mini clear suction cups . Remove the velcro tape from your toll tag and then push the tag all…

Downloads
106
Likes
5
Rating
0
P
PrintablesArboban

ASTRA Falcon 4000 grips cachas

Cachas de la ASTRA Falcon 4000. Modelo liso sin dibujo, personalizable. Gun grips of ASTRA Falcon 4000. Smooth model without drawing, customizable.

Downloads
103
Likes
3
Rating
0
P
PrintablesAshVeganas

Opel Astra H cup holder - modular system (Vauxhall Astra H)

A work in progress modular mounting system for Opel (Vauxhall) Astra H. This mounting system features modular design, so you can create your own things that you want to mount - cupholders, phone holders and so on. In my case I wanted a…

Downloads
102
Likes
17
Rating
0

Cover for Trunk Light for 2007 Opel Astra

Maybe this fits other older cars, just try it. I can only say that it fits the Opel Astra H from 2007. Print in translucent filament. There is no need for supports, because the overhangs are small enough. You will have to transfer the…

Downloads
97
Likes
9
Rating
0
P
PrintablesWeles-FDM

40K forearm astra militarum armor prop

Hello, it's me again. This time I'm bringing you a piece of armour from my armoury. Lower elements are identical on both hands. Forearm armour is connected with 30 mm elastic bands and buckles, as shown in the photos. Hand armour elements…

Downloads
97
Likes
25
Rating
0
P
Printablesczrtst

Opel / Vauxhall - Insignia / Astra - Tempomat Schaltrad - Cruise Control Wheel

As i drive as much as possible with the cruise control the rubber wheel is worn down after nearly 14 years and it was hard to adjust the speed with it. To change the whole expensive switch assembly you had to remove the airbag - so that…

Downloads
97
Likes
18
Rating
0
P
PrintablesSascha74

IPad Air 2020 Astra J 2010 Halter

Habe hier einen Halter fürs Astra J 2010 Cockpit erstellt. Und einen Vorrichtung für´s IPad Air 2020.

Downloads
94
Likes
3
Rating
0
P
PrintablesDen

Opel/Vauxhall Astra G OPC Keychain (Front view)

This is a Opel/Vauxhall Astra G OPC keychain from front view. Good for people who love this car.

Downloads
93
Likes
15
Rating
5
P
PrintablesSALITIBI

Opel Astra H Glove compartment light adapter/frame

This model lets you use the trunk light, or any replacement for it in your glove compartment. The original factory light is a faulty design, which has a switch built in, that is meant to turn the light off once you close the glove…

Downloads
93
Likes
15
Rating
0
P
PrintablesEZ CNC Designs

NutHugger, Lamb (Sheep) Castration Tool

Used to hold the lambs nuts in place so they can be banded for castration. Just pull them down, slide the NutHugger over them to keep them down, then apply your castration band. Edges are slightly eased to prevent snagging

Downloads
92
Likes
1
Rating
0
P
Printablesyardi83

Opel Astra J 2011 Air Grid Stopper

Stopper for your Air Grid to not swing to left and right when installing a Smartphone holder on it

Downloads
92
Likes
7
Rating
5
P
Printablesps219993

Ölfilterschlüssel Z19DTH Vectra C Astra H Meriva 32mm

Ölfilterschlüssel Z19DTH Vectra C Astra H Meriva Erfolgreich getestet.

Downloads
92
Likes
2
Rating
0
P
PrintablesStormCrow 13

Vadrik, Astral Archmage

Starting this year's Pride Month with Vadrik, Astral Archmage Vadrik and his Husband Hailin who never shows up confirms the Church of Avacyn's support for Gay rights and the legality of Gay Marriage on Innistrad Happy Pride Month! If you…

Downloads
90
Likes
20
Rating
0

Opel Astra wheel rim cap

I made a new version of the wheel rim caps for my Opel Astra car. Printed with Prusa MK3 MMU2S and stell sheet Textured PEI.

Downloads
90
Likes
8
Rating
0
P
PrintablesJulian Guevara

Sunvisor Holder Opel/ Vauxhall Astra 1995

My old sunvisor clips broke due to age so i made some new. Would recommend printing it in something quite heat resistant.

Downloads
89
Likes
19
Rating
0
P
PrintablesKiko Jr.

GM/Chevrolet Astra H7 Led Adapter (16mm)

Adapter for the H7 Socket on the GM/Chevrolet Astra year 2000 or plus. If the LED gets loose in the adapter, i recommend to drill a small hole and screw a set screw to lock the led. LED Diameter: 16mm Based on the led: Shocklight S17

Downloads
89
Likes
15
Rating
0
P
PrintablesOliver B.

Opel Astra G Cabrio Getränkehalter

Ein Getränkehalter für alle Astra G Cabrio Liebhaber. Der Halter besteht aus 2 Teilen die leicht ohne Supports gedruckt werden können sie werden einfach zusammengesteckt und mit einer M5 Schraube fixiert. Funktioniert sehr gut und ist…

Downloads
86
Likes
8
Rating
0
P
Printablesmaxkf

Opel Astra K MagSafe Adapter Phone holder

This Adapter allows you to use this strange small compartment in your Astra model Komm. My phone would not fit in this compartment, so I created this adapter to mount one of this MagSafe rings: Nillkin SnapHolder , they have adhesive on…

Downloads
84
Likes
10
Rating
0
P

Vase Astract

Vaso moderno ed astratto creato da me

Downloads
83
Likes
16
Rating
0
P
PrintablesChochi & Freyja

Astra H ashtray cover USB Panel

Astra H ashtray cover only with USB Panel

Downloads
78
Likes
7
Rating
0
P
PrintablesSylvainG2MI

Chargeur USB habitacle arrière Opel Astra

Prise USB pour permettre la recharge d'appareil

Downloads
78
Likes
9
Rating
0
P
PrintablesBORO

Opel Astra G Coupe Keychain

A simple Opel car shaped keychain

Downloads
75
Likes
5
Rating
0
P
PrintablesNicholas

Runescape Coaster - Astral Rune

I created several coaster models based on this model. The rest are on my profile. I really wanted to print some Runescape themed coasters, but found that the models already out there were kind of bad. Print with 20% infill for best…

Downloads
74
Likes
19
Rating
0
P
Printablesbernhardr

Handle for Astral Skimmer basket

I made this handle as a replacement for a broken part. To support the outermost pins i painted 2 very small supports using the support painter feature of PruceSlicer, but i am not sure if those are really needed … just to be on the save…

Downloads
74
Likes
4
Rating
0
P
PrintablesKuran Kaname

Opel Astra F Key Cover / GM Key Cover

Key cover for old cars. Made it for an Opel Astra F key replacement. Use some glue to keep the key and 2 parts combined. I printed it in ABS as it will see summer in-car heat. Print Settings Printer: ZeroG Mercury Rafts: No Supports: No…

Downloads
74
Likes
5
Rating
0
P
PrintablesJedda

Cap for Glass bottle - Sodastram Duo

A remix of a lid for Sodastream glass bottles. In 2 colours with a 3D heart on the lid. Ein Remix eines Deckels für Sodastream Glasflaschen. In 2 Farben mit 3D-Herz auf dem Deckel.

Downloads
74
Likes
10
Rating
0
P
PrintablesX+N

Astral Express

A VR+Rhino quick sketch of Astral Express for multi-color print

Downloads
73
Likes
3
Rating
0