Hanging Gardens of Babylon - Pot Plant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
- Downloads
- 339
- Likes
- 93
- Rating
- 5
Counting matching models…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Scale in almost any size you like and slice so that it starts in black then changes to white and then orenge then red. remix into a magnet or blow up to 30 inches high your choice. Display it somewhere prominently to make alien diplomats…
Motivation I saw the new soap dishes contest and I finally had an idea of what to do for the last meters contest. → A soap dish that uses less then 5m of filament and thus meets the parameters for the “last meters” contest. Additional…
The Zócalo on Babylon 5 was a central meeting place in red sector where many characters would go to unwind, have drinks etc. The ice blue neon sign recreated here featured in many many episodes in the background. Through various forums…
The Imago Mundi dates back to around the seventh century B.C.E. and is considered to be the oldest world map ever discovered Created around the seventh century B.C.E., the map centers around the Euphrates River and includes various…
This is a 400mm wide Shadow ship from Babylon 5. I didnt draw the original model, the original can be found here: https://www.thingiverse.com/thing:40536 But i wanted a larger one than my print bed could do in one piece, and the original…
This is my 86mm long Minbari Sharlin cruiser from Babylon 5. Its in the same scale as my 92mm Omega Destroyer, and the Revell Babylon 5 station model kit. I printed it on an Anycubic Photon at a 0.05mm layer height. It is intended for…
A remix of Marian87's Babylon 5 Thunderbolt on 3Dwarehouse. Borrowed the badge from Inquisitor. Fixed many issues since this model was not intended for 3D printing. To be done: Decals and Missiles Fixed canopy framing Fixed wing…
This is a model of the Minbari WhiteStar form the Science/Fiction Television show Babylon 5. Print in any filament and scale you want.
Maqueta de la nave G'Quan Heavy Cruiser de Babylon 5
Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral: https://unstoppabledomains.com/r/cc353d5f40d64e8 Visit my website:…
Old Babylonian culinary tablet (1900-1600 BC) with Akkadian recipes for 25 stews. Stews from this tablet were studied, cooked & served at An Appetite for the Past at NYU in May 2018. For more info, please see: Martell, B. What did ancient…
The Babylon Hanging Basket Us Brits call them hanging baskets but I think they're better known as hanging planters in the rest of the world, anyway….. I wanted to design something that could be modular in design and therefore fit many…
All models i could find were laden with imagined detail on the right-hand side of the body, so I made this version and fitted the grip from metaform3d's model.
This set of 4 coasters, inspired by the 90's cult sci-fi series Babylon 5, features four different, multi coloured logos, recognisable to any fan. Each has been designed to make use of pause for colour swap in PrusaSlicer. Dimensions (…
Make sure to cut the black mesh (speaker grill) close enough, so it doesn't interfere with the mounting posts. And bore out the led hole before any other post processing. Enjoy
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…
Originally made as a present for my father, it was inspired while watching Babylon 5, I thought the cup or mug was cool and set out to make a model for it. Easy to print, but you do need supports for the bottom of the handle. Print in…
While printing https://www.thingiverse.com/thing:678483 I though a barrel liner in a contrasting color would add a nice touch so here you go.
This is model is designed to be printed with a Bambu Lab AMS or similar. I recommend printing with a .2mm nozzle at .14mm layer height. The best sheet magnets I have found to use with this model is Marietta Magnetics brand 30mil (with…
This is a model of the less known Babylon Tower original created by Endre Pap. The original design had a mechanism to click in place, I thought it would be a nice idea to magnetize it. There are spaces for magnets to hold the (magnetic)…
Full color recreation of the Babylon 5 Logo. NO MMU needed. all parts can be printed individually and glued together. Use whatever material you like, I purchased this kit: SUNLU PLA+2.0 3D Printer Filament Bundle, Multicolor with 250g…
My first attempt of babylon puzzle. You can select from various difficulties from 3 colums to 8 columns. It fits 10mm balls. Files called Babylon puzzle insert X are variants of 3 to 8 columns. This file need to be printed 3 times.
The sign used on the interior of the Babylon 5 station.
15.10.2026 Upravil jsem design a tiskovou pozici pro snadnější tisk a rozhýbání. I adjusted the design and print position for better printing and movement. 18.10.2026 Přidána verze pro případ, když je k dispozici jen tiskárna s jedním…
Haven't it printed yet but will upload a picture if done. Simply scale as desired.
Walker avatar from Babylon 5 The Ender3 OBJ file has a wood grain finish. Basic model is provided in OpenScad Model textured in IdeaMaker. Should be painted to highlight the wood grain. Adding an interior LED would be ace.
I managed to aquire a medlab wall panel from Babylon 5. These were made of 0.060" thick styrene vacuformed over a wooden buck and then painted in a blue, then detail highlighted in silver and then dry brushed with a green color. Somebody…
I designed the stand to fit Alain Rivard's B5 Thunderbolt model. The base was designed so that the bottom of the model fits snugly in the cradle. The base is printable in 2 pieces. Print the tall piece upside down and with tree supports.…
Not sure of the exact original scale of this. I sized the model to be about 4' square. Scale down if you like. I dont expect everyone to print for around 860 hours and use almost 4 entire rolls of filament. If you have an orange storm…
Babylon A.D 80's Band Sign As with most just resize to what you want and color if you have a color printer. I tried to keep the logo’s as original looking as I could, I made these for my wall not to sell & figured someone else might like…
2. Hanging Gardens of Babylon A richly detailed interpretation of the legendary Hanging Gardens of Babylon. The model includes tiered architecture, arches, flowing water features, dense vegetation, trees, and decorative stonework,…
Space pirate fighter from the Babylon 5 series created this model using Meshy.AI
Simple tokens that can be used to play Babylon . Other Versions There is also a version for laser-cutting . Support My Work Should you want to, you can support me at Patreon . If you are unable to become a patron, remember that likes are…
The sign used on the interior of the Babylon 4 station.
This is a figure of Kosh Naranek from Babylon 5, created using Meshy AI.
Babylon is a very simple but exciting, logical game, for which you need just 12 tiles of 4 colors. Rules can be found here . This is my take on the design of this game. Initially I've thought about circular pieces and one cylindrical box…
A brace to prevent sagging for Manglerat's UCS-scale Babylon 5 once hung from the ceiling. Despite adding reinforcements to the radiator panels, the lower panels still tended to sag inward. By putting this brace on the forward lower set…
Insert for the board game Babylonia (3rd edition). Fit in the box is largely loose, and all pieces fit with plenty of space.
Lennier the Minbari from the Babylon 5 series, created using Meshy AI.
Hello, this is the third part of the seven wonders, i used Ferdinand Knab's paintings as source model. You can resize the image in your slicer to 200*160 mm before slicing (i did it so, to make all print at the same size); and you can use…
This Logo is a flat 3d print that takes: 4.6 meters of filament 32 minutes to print Cost of .27 dollars Works well with PLA filament I recommend using zero infill regions. If you want to check out the Babylon Bee visit…
This Project should be printed with at least 4 walls and 10% gyroid infill. I used 1 roll and a half for the main color. The only two tricky parts of assembly are: 1. Hot glue the spring to the trigger to make it easier to get the grip…
Drazi Tirk from *Babylon 5: The Legend of the Rangers*, created using Meshy AI.
The tile trays that come with Babylonia are nice, but they're not quite deep enough, and the times can sometimes tip over and out of the tray, which is embarrassing for everyone involved. Elevate your trays to let the tiles sit deeper in…
A brace to prevent sagging for Manglerat's UCS-scale Babylon 5 once hung from the ceiling. Despite adding reinforcements to the radiator panels, the lower panels still tended to sag inward. By putting this brace on the forward lower set…
Hello, this is the third part of the seven wonders, i used Ferdinand Knab's paintings as source model. You can resize the image in your slicer to 200*160 mm before slicing (i did it so, to make all print at the same size); and you can use…
This Logo is a flat 3d print that takes: 4.6 meters of filament 32 minutes to print Cost of .27 dollars Works well with PLA filament I recommend using zero infill regions. If you want to check out the Babylon Bee visit…
Insert for the board game Babylonia (3rd edition). Fit in the box is largely loose, and all pieces fit with plenty of space.
Imagine entering the ancient city of Babylon… This model was created by Zuknaini "Izu" Mohd Sabri, aka @izuka.arts . He also has great videos of his architectural models . It depicts the brightly colored Isthar Gate , once a Wonder of the…