collectible card box (Pokemon, Magic, Baseball)
Cardbox with dividers. no supports needed.
- Downloads
- 606
- Likes
- 89
- Rating
- 5
531 models
Cardbox with dividers. no supports needed.
Eine Wandhalterung für einen Baseballschläger mit Standardmaßen.
Inspired by The DOM organizer. I modified the dugout organizer design made by John Tedesco ( https://www.tinkercad.com/users/hRCDevMzLeH-john-tedesco ) https://www.tinkercad.com/things/4cf5V6weAc0-dugout-organizer The design of the bottle…
This is a pretty reasonable approximation to a baseball using openscad. I designed it because I need a baseball that I can modify and incorporate in another design. Openscad is capable of importing the stl baseball available in…
Customizable keychain. You can add your players name and number. Made this for my girls and they loved it. This can be made with either baseball or softball colors. Just do a color change when the stitches start printing and it will look…
Baseball Fidget Toy / Spinner Cute little Baseball as fidget spinner. It's a print in place part. The size of the Ball is Ø40mm. In this case I didn't use multi-color option (wasteful and time consuming). If you want to color the seam you…
This is a simple display stand for a baseball. Baseballs can vary in size slightly, but not by much, so they should all fit. Show off that great "No Hitter" ball you earned or a great autograph you acquired. Posting photos of your printed…
Easy to print and easy to use hat hanger. I've tried several designs on printables for hat hangers and nothing did exactly what I needed, my hats often fell off or the design was difficult to print. The best one I found so far was…
3 Bats on Homeplate Baseball Display Stand
Simple card display stand for any flat surface (Shelves, Desk, Dresser, etc)
Here's one of that start of a whole set of accessories for my Mega Brick figure. Want to see more like this? Check out all my Mega Brick creations. This model is also available on Makerworld. Printing This is a much simpler print than the…
This is a wall mountable hat hanger that is meant for displaying of rigid baseball hats. The button of the cap is loosely held by the top and the rest of the hat is supported by the lower extension. There will be a floating effect and the…
Baseball cap for DUMMY 13. Now your dummy's head can be protected from the sun, while looking stylish at the same time. Print Settings Material: PETG Resolution: 0.1mm Infill: 20% Shells/Perimeters: 2 Supports: Yes (included or generated)
A simple clip to hang a baseball bat for display. Print on the flattened corner to improve strength in both directions, no supports necessary. Recommended print settings: 3-4 shells, 20% infill Printed as shown in PETG.
Baseball Caps Insert| Hat Shaper |Cap Liner| Ball Caps Form| Hat Stretcher I used 10% infill PETG Once done printing take the print off the build plate and start molding to the inside of your hat. The build plate is still hot so be careful.
Baseball cap made of articulated fabric, 3D printed from PLA. Please see this short video: https://www.youtube.com/shorts/7Hk1-2h5WbM The cap is very soft, comfortable and durable. The front is solid, the sides and back are made of 3D…
Baseball cap for the Mega Lego Like Minifigure (10:1 scale) I remixed it from another model to fit this 10:1 maxifig. V3 model printed by myself and it fits snug Printed in PLA 0.2 layerheight with support, 5 to 7% infill will be good…
Sometimes you need a PDT (Pokey down thing) and everything close by is just a bit too large... Not anymore! the Baseball bat PDT takes 10 minutes to print and is the perfect size for whatever you're rolling
Spiral fidget in the shape of a baseball! I printed several of these for my son's baseball team and they loved them! Printed on the Snapmaker U1 with the following settings. Layer height - 0.16 Wall loops - 3 Sparse infill density -5%…
A colleague got sick of his baseball rolling off his desk and asked me if I could do something about it. This is what I did about it.
Wall baseball bat support with reinforcement
Remix of https://www.thingiverse.com/thing:3170493 to allow you to use only one set of mounts. Uses #14 screws to mount to the wall.
Hit a home run! At home and in your hands. With the first ever 3d printable baseball pinball here in Prusaprinters. Do you miss playing outside? This completely functional baseball-pinball can make you miss it a little less, have fun in…
This is a coaster with a baseball ball shape to allow you have a drink during the matches of your favorite team without dirtying the table. It's a simple design with a ball in the middle of the coaster. You can print the full model or by…
A simple storage rack for holding baseball/trading cards (~64mm x 89mm). Racks have a slight draft angle on the sides to improve rigidity and allow for easier stacking. Reliefs at ends for easier insertion/removal access. Intended for…
🥎 Customizable Softball/Baseball Keychain – OpenSCAD File This is a fully customizable keychain designed in OpenSCAD. It's great for team gifts, personal use, or sports-themed accessories. The file is free to use , and designed so you can…
Baseball Cap Holder This support-free wall holder is designed to hold a baseball cap. It was inspired by other similar models but I didn't like that they all seemed to either require supports or weren't designed for command strip…
I wanted a nametag for my kid's t-ball bag, so I tossed this model together.
Lucky 13 Baseball bat If you like it --> press like it :-) Baseball bat for the funny lucky 13 figure. The katana model is from kh4rj0 . Take a look at my models, there you can find some more equipment for lucky 13. Would be happy to see…
Baseball card stands in multiple sizes. Display your favorites, and enjoy them! Happy printing! *The mm value in the files is for the size of the hole, please be sure to measure your card width so you can find the right one.
Show off that "No Hitter" ball or a great autograph you acquired with this holder that is based on a three sided pyramid. Posting photos of your printed work with the baseball would be much appreciated. Check out my other baseball stands:…
Easily scalable and multi-purpose sports ball themed holder stands. Makes a great little gift for a sports fan. Choose from either 15mm or 10mm groove cut variants and from the following sports: ⚽ Football (Soccer) 🏀 Basketball ⚾ Baseball…
This is a baseball bat hanger/holder that you can hang up to 3 baseball bats from. I've uploaded two versions. One is a pretty standard wall-mount style with some countersunk holes for screws. The other is the original version I made,…
I needed a model of a hat to model other things to clip to a hat, so I remixed a model I found on GrabCad.
A simple wall baseball stand Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.2 Infill: 38 Filament: Sunlu PLA Wood Category: Household
The model is quite tall so a larger printer would be easier to use. Cutting the file in half and printing it in two parts works just fine. Gluing it together with something like superglue is what I did. The line is slightly visible, but…
A simple baseball hat hanger that uses a gentle curve instead of a single hook so the hats look nice on the wall. The gentle curve that the hat hangs on fits the back strap of the hat so that the hat remains in its natural position when…
For printing use tpu 95a or harder material for throwing around, but if you want to bat use a softer material so it doesn’t break that easily BETTER VERSION OUT NOW: Check out airless baseball v2:…
Baseball Garden Gnome – Swing into the Season! Batter up! This fearless little slugger is ready to hit home runs and protect your garden with gnome-grown grit. Some supports, organic type works perfect, comes off fairly easy! Happy…
Major League Baseball / MLB logo in 3D. 5mm high.
This model is compatible with the lego system.
Simple and effective way to store your hats. Held in place with two wall screws. I printed mine with 3 wall, 15% infill and 24mm layer draft mode.
This model is compatible with the lego system.
Under the stl file is a 3mf file for Bambu Studio. Using a site like Tinkercad, you can easily add your own words onto this. To change the text in Bambu Studio, press on the objects button, then select “text_shape”. After that, then press…
A simple four-sided display stand for a standard size baseball. It has rounded off corners so it shouldn't scratch up the leather cover. I designed it for some balls my kids had gotten, and I used PrusaSlicer to emboss their names on it.…
This is a baseball display in the shape of home plate. The photos were taken of a print @ 0.20mm layer height with black PLA.
This is a trio of bats designed to hold a baseball. This model does not have much surface area touching the steel plate, so a brim is recommended. I used a 3mm brim. I was able to print it without supports. I used full length bat…
A baseball cap for #3DTakoTuesday to wear. The hat replaces 3dtakotuesday.top.mm.stl. This design is a derivative of Shawn Bradford 's Lakers New Era Cap . See here for more accessories and information for #3DTakoTuesday:…
I started filming my airsoft games and practices for fun and I needed a good sturdy mount that would go on my airsoft baseball cap to hold my Xiaomi Yi (or GoPro compatible) camera. Finding none that hold on tight enough I designed one…
Hello sports and music fans, combine your passion for both by showing off your favorite sport with one of these smooth and elegantly curved knobs. For the single piece set each has its own 🌀 wormhole styled base suited to its sport. Easy…
Made the main base larger (about 9 ½ in or 240 mm wide) and added two holes at the top for possible bungee connection. Original cup holder and fence hook still fit. Used the original print suggestions, but added a modifier on the bat…
Baseball cap screwable on my cute mini octopus remix ! Here is the link to the octopus remix : https://www.printables.com/fr/model/334508-modular-cute-mini-octopus-to-ad-differents-types-o Add supports for print but check if there are…
Since I made a baseball I thought I'd better make a bat! Hope y'all find it useful. Print instructions Category: Math Art
Baseball and Softball fence rack. It features : 1 Bat holder 1 Bottle holder (up to 85mm. Owala-24oz can fit easily) 4 Hooks 1 decorative moustache (because it's cute) This model is free for personal use only. Please, contact me if you…
A mini baseball bat, with 2 pieces that can be printed separately and screwed together with a built-in thread. Once screwed together it is 12.5 inches (317mm) long. Designed this as a mini-baseball bat for toddler photo session prop. If…
Very easy to print baseball holder. Nice for kid's gameballs or autographed balls from the ballpark. Can print all one color or change color for the last few layers for multi-color.
Baseball ornament that can be personalized easily.
id : se1008172a2 size : 128X128X186mm files : 3 pieces : 4 maximum size of the component : 128X128X128mm total print time : 12h:50m raft : yes support : no Applicable Bulb type : tBulb B Instructions : 1.lampshade infill 100% , Best…
Check the profile to download the full set of Christmas decorations. Subscribe to not miss out the next one! Sports balls for your Christmas tree. 3 balls are included in this set - Soccer/Football, Basketball, Baseball.
Keychain Baseball For more custom request and keychains visit my Etsy Store For custom baseball keychains visit Etsy - Custom Keychain Easy to print. Great as gift. Do you want to support me or become a reseller of my designs? Go take a…
A model made from scratch for a Reddit user. It would make way more sense to cut the board out of plywood with a laser cutter than to 3D print it. The board dimensions are ~310×316×2 mm or ~310×316×6 mm. SVG versions for the laser cutter…
A simple baseball bat that fits the hands of a 100% dummy 13. Enjoy!
Did this as a remix of my ring stickup baseball cap cover, I've never made this, but... it should work? Category: Camera
Credit to : Moesi1985 Credit to: Baseball Cap Wall Hook / Wandhaken für Basecap byMoesi1985is licensed under theCreative Commons - Attribution
This design was requested by co-workers of my wife. I had seen some made of wood but haven't seen any for 3d Printing. This is a 2 color design the base is red and the top is white for my design. Any questions? Feel free to message me.
Glove Backbone / Shaper Keep your gloves in perfect shape, even when crammed into a gear bag! The Glove Backbone is designed to hold the internal form of your glove wherever you take it, preventing it from getting crushed or deformed.…
Wall mount for baseball bat Large mount ⌀ 48mm Small mount ⌀ 28mm Based on https://www.printables.com/model/50407-baseball-bat-wall-mount adapted for different sized bat. Designed using Adobe Illustrator and Autodesk Fusion 360.
A card stand used to hold up cards, easy to print and looks pretty cool. Check out my other models! use the 2mm version, it is better for holding cards, but if you're using something thinner like paper, then use the 1mm.
Baseball Lacrosse Game Ball Display Holder
First project I ever did, built entirely in a slicer meant for a friend who wanted to show off his MLB Cards holds 1/4" acrylic cases
This small baseball stand is intended for displaying a baseball, while keeping it from rolling away. It is shaped like Homeplate for an extra nice, sleek design. It was printed at 15% infill with all basic settings. No supports needed. If…
Baseball keychain 3 colors with advanced pause and at least dual color nozzle/splitter / 2 without To print with 3 colors: Set base and outer ring to first nozzle/color (white, then switch to black at M600 pause) Set seam to second…
Baseball display stand based on a four sided pyramid. Show off that "No Hitter" game ball or a great autograph you acquired. Posting photos of your printed work with the baseball would be much appreciated. Check out my other baseball…
Let your baseball bat shine on this simple but beautiful stand.
Baseball Earrings Hoop and stud Raised (Filament swap) and Flat (AMS) I Prefer the raised even though I have an AMS. I have uploaded the bambu studio 3mf files as well as the stl. I printed in a .2 nozzle on an A1 mini Check out my other…
I printed my jibbit with a 0.4 mm nozzle and even after playing around with Cura's setting for a bit, I found that I could get the highest quality by toggling the “Print Thin Walls” button. From a far the laces look fine but if you get…
Originally published on 08/28/2018.
This model was made in the image of Ebbetsfield though I skipped the front line of windows. They wouldn't have printed well. To be honest, I'm wondering who's job it was to wash them in the real world!? The print is in two parts: ground…
Very simple baseball stand. Small and large variant. Print settings: Filament: PLA Layer height: 0.08 mm (0.4 nozzle) → for fine profile Infill: 10% Perimeters: 2-3 Support: not needed Top/bottom fill pattern: monotonic lines Top/bottom…
Nice and neat baseball keychain, great for gifts
Baseball bats puzzle. Can be used as a ball stand. When printing, you need to match the flow to the plastic. So that the parts fit tightly when assembled. I came across a video on YouTube with a similar metal puzzle. I decided to make my…
Print Settings: Use your fine tuned settings made for your printer Infill won't make a difference No supports are needed Be sure to print in proper orientation Comments: Thanks for downloading, happy printing!
This model is compatible with the lego system.
This is a 90 centimeters long baseball bat for those that want to dress up as something that needs a bat but don't have one themselves. With the right material and settings you could even use this for casual baseball playing. The design…
I wanted a mount that could clip to the brim of my cap to allow a first person view for my Insta360 Go 3 action camera. I wanted this primarily for taking video of my competition shooting so I could review and analyze my performance.…
baseball bat consisting of two pieces for better printing and the opportunity to enlarge the model to your liking and the ability of the printer. It is printed from PETG, then the product is stronger and can be etched with chloroform for…
Premium Baseball/Football Card Display Stand Showcase your prized baseball cards like a pro! Our sleek and sturdy Baseball Card Stand is the perfect solution for keeping your valuable cards on display, whether graded or ungraded. Elegant…
sexy woman playing baseball with bat
My friend visited me on his vacation and one night we went to a baseball game. It was his birthday and he got a gift package with a signed baseball. We wanted to create a holder together. We decided on making a small, low-profile holder.…
Minimalist Baseball batsman figure Small Size 48 x 87 x 9 mm Middle Size 65 x 117 x 12 mm Large Size 81 x 146 x 15 mm If you have any idea about the theme of decoration, contact me in messages. I would be very happy to share pictures of…
Made from Tinkercad, it works and can hold a baseball card in a normal case, probably not a thick case though
Thank you for downloads, likes… Enjoy !
A minimal and horizontal built baseball bat holder. Consists of a support for the handle and for the barrel for a 2 5/8" bat. The design was based around a Louisville Slugger wood bat. The design includes countersink for two drywall…
I needed to mount some custom built baseball bats in my office but I didn't have enough “top down” space. Since width wasn't a problem I designed these hangers that use the weight of the bat and leverage to keep everything in place. The…
A great wall art of a Baseball Player. Do not forget to LIKE the model and upload your makes, thanks ! Inspired by a sticker