204 models
There is a new revision B of this project , with more pipe diameters and additional wall mount distances. Unless you like to print exactly this version of the clamps, please use the newer versions with an improved geometry. Check out the…
Print approx. €2.25–€2.76 excl. taxPreliminary estimate for PETGSource material: PET
Printing Material and settings should not be all that important. 0.4 nozzle with 0.2 layer height walls and infill: defaults will be fine print orientation: same as STL OpenSCAD Requires HSW lib and BOSL2, see here for detail .
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
This project uses low temps, high extractions, slow speeds, and several other tweaks to remove oozing and major defects with this specific TPU filament. Make sure to have your tensioner screw as loose as possible and use a 0.4mm nozzle.…
This is my design of fully functional washers with built-in structural support. I created them for the FFF process to be printed using PETG or ASA material. Printed with the correct settings and materials, these washers are quite strong…
I created this colorful contraption specifically as an education tool that can be used in classrooms and with younger children to help teach the basics of gear mechanics. It features several common types of gears, including spur, helical,…
This is my design of a fully functional, print-in-place hinge – especially created for the FFF process using PETG or ASA material. It is a high-strength design with the series number 300. It is suitable for heavy furniture doors and lids…
The original model by FruitieX was great but I found that my Amazon Basics AAA and AA batteries didn't fit so I changed the couple battery size parameters in the Fusion file to get the fit right. Posting both the inserts and the base, I'm…
Amazon Basics Tripod Adapter Plate for the following tripod: (https://www.amazon.com/AmazonBasics-60-Inch-Lightweight-Tripod-Bag/dp/B005KP473Q), meant to be used with the following screws: (https://www.amazon.com/gp/product/B00IXDECV4)…
Modeled in OnShape. Printed on Elegoo Neptune 4 Pro. Dimensions: Inside Base: 114mm x 49mm Overall Height: 92mm
This is my design of a fully functional, print-in-place hinge – especially created for the FFF process using PETG or ASA material. It is a low-strength design with the series number 150. It is suitable for lightweight doors, chest lids…
Here is my design of straightforward replacements for wooden dowels. I created them for the FFF process to print them using PLA or PETG material. If these dowels are printed with the described settings and in the correct orientation, they…
This is my design of a fully functional, print-in-place hinge – especially created for the FFF process using PETG or ASA material. It is a medium-strength design with the series number 200. Two 80mm length hinges of this design will…
Included are 5 simple wind tunnel test articles for the Modular STEM Wind Tunnel , intended for use with smoke visualization to concisely demonstrate the concept of streamlining and show how the wakes behind different geometries can vary…
Hi, pumping out the air of these vacuum storage bags with the manual air pump is no fun. So I made this adapter by combining both listed models. Works great. It now takes only a few seconds to empty out a medium/big bag. my print…
This is a mount to attach an Amazon Basics USB Extension Cable to the underside of a desk or other surface. It has two 5mm screw holes and can be printed without supports.
Ipad Holder for tripod Amazon basics. You only need two zips tie to ensemble base with Holder. https://www.amazon.es/gp/product/B005KP473Q/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Print options - Supports in base. Infill 20% Used…
The motivation for this project was just to prove to myself that it could be done. I haven't seen any other models of this online. I'm not really a fan of the “just buy them” argument if I have the means and knowledge to make it myself…
Mounts with two M3x8 screws to “insert-with-M3-dual.stl”. Probably use a brim (inner brim worked for me)
This is my design of fully functional corner brackets. I created them especially for the FFF process to be printed using PETG or ASA material. If these corner brackets are printed with the correct settings and materials, they can…
Requires a bit of force to mount Use Supports on build plate CAD: https://cad.onshape.com/documents/5ba107f85dbf2a410cf25720/w/0fec43ad386a43c19f2120cf/e/2c120b52248bc3e970ff815d (not my neatest CAD, sorry! :P ) Leave a comment if you'd…
Parallel Plier Parallel Zange Some parts must be printed multiple times: 2x brakets 2x handles_l 2x handles_r 4x 5mmbolts 4x7.5mmwasher 2x spacers 4x bolts Enjoy the print and usage. If you feel that I earn it, please send a tip or…
Remix for The Ultimate Cereal Container Filament Drybox - Official Remix The base is remixed to fit one of the most popular cereal containers available in Australia that can fit filament spools.…
German: Dies ist mein erstes selbst konstruiertes 3D-Modell: Ein praktischer Kotbeutelspender, speziell entworfen für die Amazon Basics Hundekotbeutel (3,5 cm hoch, 6 cm breit). Das Modell besitzt eine integrierte Aufhängung auf der…
This is my design of fully functional angle brackets. I created them especially for the FFF process to be printed using PETG or ASA material. These prints require a well-calibrated printer and high-quality filament to be functional. If…
I don't recommend using this long-term but it works well enough as a stopgap until a more solid Dobsonian base can be made. The Amazon Basics tripod is tough to move, imprecise, and sways way more than a solid base would. I recommend…
I've wanted to have a Gort figurine for a long time. I decided to remix this so that it would be printable for as many people as possible, and so that it would (as much as possible) remind me of Gort's first appearance in the 1951 movie.…
Remixed this thing here:( https://www.thingiverse.com/thing:2936145/ ) - fixed a couple warnings, and added the option for an open flange (e.g. where the pipe opening goes through the flange). Print Settings Rafts: No Supports: No…
Amazon Basics Keyboard Underdesk Mount
Gridfinity holder for Amazon Basics Diamond Needle File Set The six holes are 12mm diameter and 36mm deep. If you want to install M3 bolts in the bottom, just punch through the thin skin above the magnet/bolt holes Remixed from…
Replacement plug/cap for Ergotron LX and Amazon Basics (B00MIBN16O, B07QNY2G4T) monitor arm. I tried to loft the upper surface as close as possible to the profile it's supposed to be.
This is a remix of another design for a non-latching case for the Amazon Basics/Denbali Electric screwdriver and Parametric Latching Rugged Case design. I don't have access to Fusion 360 so I had to manually cut and splice the rugged case…
The blue caps that these come with break, now you can print a replacement. Enjoy!
My wife and I have nightstands without any way to charge our phone easily. I had these extension cables to reach the stand, so I created a mount to hold the cable underneath the nightstands. Product: https://amzn.to/2A0OKzv Print…
There are several different configurations for each bin dimension in the 3mf files
I wanted replacement mount inserts for my Amazon Basics 50 in tripod. I am far from a design-expert so feel free to tweak this to your needs.
I wanted to mount my phone to my amazon basics tripod using the quick-release plate. So I created this model. The holder can extend from about 60 to 100mm, worked with my iPhone 13 with case and iPhone 7. Hardware Needed: 1 M3 threaded…
This is the basic parts to make your furnitures. Our topic about this product: https://letmeknow.fr/fr/blog/107-tuto-le-meuble-by-letmeknow ---- FRENCH --- Notre article de blog sur le sujet:…
Stand holds up to 49 tubes of Liquitex Basics (22ml) in rows of 7. Platforms snap into sides and sides slot onto base for added rigidity. This rack is pretty solid and works fine without the base if you prefer. Lay parts flat for easy…
Print one of each file (left and Right) I used Wood Screw type 6 x 1/2" to mount under desk FYI, the "post-design-process" has taught me that my design is not 2-year-old-durability-proof, so back to the drawing board, expect Version 2…
I split the model into two halves so it can be easily printed. There are two countersunk screw holes in each half, but you can get away with using only one screw in each half. I also included a full one-piece STL model in case anyone…
I want this USB hub not to be set on the floor of my garage so I designed two end caps to mount this AmazonBasics USB hub to the wall. Print: 1 x AmazonBasics_Slim_High-Speed_Bottom.stl 1 x AmazonBasics_Slim_High-Speed_Top.stl Product:…
I purchased 2 Amazon Basic tower fans (FZ10-18TR). My 5 year old lost the nut that secured the base to one of the fans. I used the other as a model and created this object. I printed it at 100% out of ABS. You might want to bump that up…
I lost the head for my AmazonBasics tripod, so this is a replacement. You'll need one 1/4"-20 hex bolt, 1/2" long. You may need a shorter bolt depending on your camera. Slide the bolt into the slot, then use the insert to lock it in…
Use a brim or raft to print Gort, but if you print him upside down, neck to print plate, you shouldn't need ANY other supports. You might want to add some to the shoulders, but he prints fine without any support at all. I superglued the…
A simple wall mount for Amazon Basics screwdrivers. Holds the driver firmly. Print vertically for highest strength on clasp. Would suggest PETG and support for roof of bit block cavity.
This battery cover fits mouse Model Number G6B-BK Here is the link on Amazon for the mouse this fits: https://www.amazon.com/gp/product/B0787D6SGQ Print flat, tabs up. No supports needed. Fits snugly, make sure bottom tabs are all the way…
Replacement bins for Amazon Basics Parts Organizer Organizer can be found here: https://www.amazon.com/dp/B08RZMKC9K?ref=ppx_yo2ov_dt_b_product_details The Amazon Basics 19-Removable Compartment Professional Organizer is a nice size and…
I got some micro SD cards for the Bambu Lab X1C. They came in this nice protective case and since students will be using them in the makerspace, keeping the adapter and micro SD card together is important. Maybe someone else will find…
Replacement bins for Amazon Basics Parts Organizer Organizer can be found here: https://www.amazon.com/dp/B08RZMKC9K?ref=ppx_yo2ov_dt_b_product_details The Amazon Basics 19-Removable Compartment Professional Organizer is a nice size and…
Ikea Skadis - Amazon Basics (Denali) Screwdriver Holder
A mount a MSI G274F monitor (27'' monitor in photo) The MSI monitor has a mounting space for a Vesa75 (75x75) and the supplied mount of the Amazonbasics monitor mount is 100x100. Created the mount, rather than buying one. The mount was…
Printed in PETG for durability.
MSI MAG27CQ Adapter for AmazonBasics Vesa Mount This Remix from reparator ,thank you Print Settings Printer Brand: Robo 3D Printer: R1 ABS + PLA Model Rafts: No Supports: Yes Resolution: 0.3 Infill: +60% Category: Computer
I noticed that the Ikea TROFAST shelves can perfectly fit the amazon basics organizers (linked below). I modeled the shelf inserts and added a second layer so you can perfectly fit two into the space one trofast bin would normally occupy.…
This is a holder for the Amazon Basic kitchen scale. Just use some tape to mount it onto a wall or rack.
Mathbox - Mathematic basics practicing I made a first version for my 7 years old granddaughter to practice basic operations (+ and -) of mathematics. His father place the numbers to add or subtract and she mentally calculate and give the…
The organizer can be found here: https://www.amazon.com/gp/product/B08RZMKC9K/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 This is a remix of Aaron F's pre-supported 1x1 bin to include a label shelf.
I combined the thoughtfully designed Amazon Basics/Denali Electric Screwdriver Wall Mount by @yipottery_2481232 and the ingenious Sy's Peglock - Locking Pegboard System by @StellasFun to arrive at a pegboard mounted holder for the Amazon…
Litte holder top screw a Amazon Baics USB extention cable to somewhere. Remove badge on cable. Depending on your printer it might be a tight fit. For cable used, see images. The cable has following dimensions: Height: 10.5 mm Width: 16.5…
Snap this onto your OpenGrid panel and keep your Amazon Basics screwdriver set locked in and easy to grab. No more digging through drawers — your driver stays neat, visible, and ready for action. 👍 Like & boost this model if it keeps your…
Remixed the 25mm hook so it Snap-On to the wildly used Amazon Basics Wire Shelving
This is a simple remix of the Multiboard Brass Brush Holder created by Austin H. that is a better fit for the Amazon Basics Brass Mini Brushes that I had in my tool kit. Print Info 0.4 nozzle Bambu Lab X1C 15% Infill (Gyroid) Bambu Lab…
You can use it to connect the female CAMLOCK fitting to the port on an Amazon Basics Vacuum Compression Space Saving Storage Bag .
Wall mount the AmazonBasics tissue box to save space. The box is light so some good double-sided tape is enough Category: Household
A quick designt to mount the Hub to a board. You need to print two identical brackets to securely mount the hub. The size of the hub here is 44.5 mm wide and 24 mm high. print on the side no supports needed no infill printed here in PETG…
Amazon Basics AUX 3,5 mm Extension Cable Mount
This is a dedicated USB-A port holder designed to securely mount the female end of an Amazon Basics USB-A extension cable onto a wooden surface or wall. It keeps the USB port easily accessible and prevents it from moving around. The…
This is an adapter to join the small sized Amazon Basics wire shelf: https://smile.amazon.com/gp/product/B01LZAV8KH to a work bench surface. In my case, an IKEA Gerton butcher block countertop:…
Hi, I recently made a amazon basic vaccum bag to dyson adapter, see here . Now I got myself this mini vacuum cleaner >> Tidy Cats; ST-6653Plus . And so I made a new adapter. It is not as fast as with my big dyson but it is much more handy…
This mount is for an Amazon Basics/Denali electric screwdriver. There's another model on this site that uses a similar mounting style but that one grabbed onto the screwdriver grip, which was scratching my grip and I felt like it would…
The original required me to file something off and used a separate screw and nut. I wanted to use the original nut and hand screw that was on the clamp (and I didn't want to damage my clamps), so I edited the model to make use of those.…
Headphone hanger for Amazon basic's monitor arm . Fits well for monitor arm which has 48mm pole. Use a zip-tie for tighten well.
A desktop mount for the Amazon Basics 2.0 USB Extension Cable. I used it for a fingerprint reader. Slide the male end of the plug through first and then pull all the cable through, the female end is a SNUG fit, very friction mounted. I've…
INTRO: I wanted to print a USB extension for my mini and I wanted to make a backplate for the LCD. I found RDWare's file, but I didn't feel like buying a new cable since I already had the AmazonBasics 1 Meter UBS 2.0 extension cable (…
This fits the cheaper and smaller Tripod branded as “Amazon basics” here in North America. I've included a step file to make it easy to adapt. I printed in ABS because these tripods usually stay in vehicles outdoors when not in use. I…
Resized to fit Amazon Basics / Denali Electric Screwdriver.
Camera Quick Release Plate (Plaque de Trépied Amazon Basics) Accélérez votre installation avec cette plaque de déclenchement rapide, parfaitement compatible avec les trépieds Amazon Basics. Fixez et retirez facilement votre caméra pour…
A stand for the Amazon basics rechargeable battery screw driver for your desk/workbench (loose fit).
I created this model to mount a power strip to the bottom of my desk in a way that's easily removable. This was more accurate than trying to place screws to match the mounting holes on the bottom of the power strip. I created it in…
I designed this to mount the amazon basics microphone (yeti style) to a mic pole, and be able to point it down, while using the omnidirectional settings. All this to stream a DND session on discord :D
Hello everyone, I was looking for a dockingstation for my Sony wf-1000xm3 wireless earbuds but couldn´t find a fitting thing for me. My plan was to have a cover on the backside to hold the cable in place (and to look nice and even of…
Remix of allen key holder to be compatible with Peglock.
USE THIS MOD AT YOUR OWN RISK. NOT RESPONSIBLE FOR ACCIDENTAL FIRE OR INJURY, BURNING TO DEATH, IMMOLATION, IMMERSION, ETC. CAUSED BY MODIFICATION. I would highly recommend a thermostatic plug such as:…
Wars of Yor: Basics (TM) is a simplified wargame for two or more players with a Rock – Paper – Scissors style format. Cavalry beat infantry. Infantry beat pikemen. Pikemen beat Cavalry. Maneuver your armies' units and plan your attacks…
Tis is a piece to protect your Amazon basics lightning cable from breaking
I recently purchased an Amazon Basics Premium Dual Monitor arm stand: https://www.amazon.com/gp/product/B00MIBN71I/ Which is equivalent to the Ergotron LX Dual monitor Arm: https://www.ergotron.com/en-us/products/product-details/45-245…
Designed in Tinkercad as a way to mount the Amazon Basics Power Cube to the back of my nightstand so that the cords were closer to the top. The likelihood of anyone else needing this is relatively slim but on the off chance that there is…
A small platform that fits on top of the regular Amazon Basics monitor arm. Made for the Belkin 3-1 Magsafe charger.
Intended to lie flat so you can see all the labels, but printed vertically so I could fit it on my platen. This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/2OLLddTw2gG Category: 3D Printing
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here! Comments Remove the Belt clip and attach this model! You'll need a slightly longer screw, but it's that easy!
Custom bins with optional label for the 19 piece organizer from Amazon Basics , or similar products. Sizes available: 1x1 1.5x1 (for 2 bins next to handle) 2x1 2x2 other sizes can be generated as requested Supports required to allow for…
This is a coupler so you can swap the ends of the vacuum hose to connect this to a Squeaky Clean Vinyl mk3 machine. https://squeakycleanvinyl.com Print Settings Printer: Kywoo Tycoon Max Rafts: Doesn't Matter Supports: No Resolution: .2…
The simple ring you can personalize with different geometrical shapes.
Here is my power strip: amazon.com/gp/product/B07SG68M1N/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1. The model requires you to install 4x M4xH6 heatset inserts and use 4xM4 (I used M4x16) screws to secure the power strip to the…
I Liked Desmodromic design for the paper towel holder, but I needed the rolls to face downward instead of outward, so I realigned the hooks 90 degrees. Also, the shelves I’m using are Amazon Basic shelves that has deferent spacing, so I…
Got a new AmazonBasics SKIL cordless screwdriver for Christmas, plus a set of toolant hex drill bits . Here's what I designed to store in on my pegboard. Holds the screwdriver, the bits that came with it, and the toolant bits. Cutout in…
I bought the Amazon Basics Monitor arm https://www.amazon.com/gp/product/B00MIBN16O/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 But the tilt pivot couldn't stay in place because of the weight. I designed this crude attempt to stop it…
Wall holder for Amazon Basics 8-Outlet Power Strip Surge Protector, 4,500 Joule - 12-Foot Cord.
This is a simple wall mount for the 60w model which has 6 ports. no supports needed. I've included a small cut out in the bottom for the AC port cord to plug in.
![HSW Amazon Basics / Tekton Metric Allen Key Set Holder [Honeycomb Storage Wall]](https://media.printables.com/media/prints/626609/images/5105286_b99e27b8-6e79-4891-986e-d8f026c2e180_87f30cf3-aad5-45f0-8377-11c91d38c12d/pxl_20231114_012759312.jpg)
