32 models
Most of the airbrush holder on the market can be installed beside you at your desk. This is the case of the Iwata holder and other 3d printable models out there. I designed this one to be installable at either the back end of your desk…
Introduction This is a holder / bracket for the Bosch E-Bike standard charger BCS220 (4A). To be used with "Yet Another Shelf" (YAS) . What you need Time: Printing time is > 7h 4x socket head screws 3x12 mm 4 washer M3 (outer diameter…
This is a wallmount to put your E-bike's Bosch charger 36-4-230 BCS220 in. My model was based on @JOGIAREA design but it seems the 2 and 4 amp versions differ a lot. I practicly had to rebuild the whole thing keeping a few visual…
Wandhalterung für Bosch E-Bike Ladegerät 36-2 BCS230 Befestigung mittels 5 Senkkopfschrauben. Weitere Ideen besuchen Sie: www.jogiarea.de Wall mount for Bosch e-bike charger 36-2 BCS230 mounting by means of 5 countersunk screws. For more…
Nederlandse Spoorwegen Ubcs "Bollenwagen" in gauge 1 / 1:32. ( http://spoorhistorie.com/goederenwagens-ucs.html ) The concept for bearings, wheels, buffers, couplings, etc.......... is the same as I applied to my other designs for rolling…
Compact wall mount for Bosch ebike battery charger 36-2 BCS230 with holder for both plugs and routing of the power cable on the rear side. Due to the edge on the underside, the print is made at an angle, which leads to better layer…
Wall holder specifically for a bosch battery charger 36-4 BCS220. Can be easily slid in and out. Equipped with holders for the plugs. Mounting by means of 3 screws. I printed my model with 100% fill, mainly for firmness. This took about…
Use (high quality) double sided tape to mount the charger holder to a wall (it has no screw holes). I highly recommend Tesa Powerbond Indoor (50 kg/m) or Ultra Strong (100 kg/m). It's quite expensive, but absolutely worth it. Place the…
Wall (or other surface..) shelves for presenting slabbed (graded) comics, or comics in bag/board. No supports Prints either horizontally or vertically - Horizontally is faster/better 15% infill should be fine M4 countersunk holes
An approximate model of the old college football BCS trophy / the current Coaches' Trophy. The model is true-to-life sized at 34" tall for the entire trophy, while the crystal football itself is 12" long. This is not meant to be a perfect…
Easy to print. Fit's little tight, so feel free to adjust using the Fusion360 file.
These are basically the ABCs but all caps Category: Other
My bosch 6th series vacuum main brush has snapped. The part that allows it to rotate broke. I included the f3d file in case you want to make some improvements. I did my best to create some placeholders of some of the parts. The V1 had to…
I've included a lower depth model (the original) and one that sits at 6u height. This matches the 6u height version of the neo model, and is perfect for putting in a gridfinity rugged case. The 2x4x6 height version also sits at an angle…
A friend has several e-bikes. The Charger is the same on alle of them. So I made this wall mount for the power supply. It works great and the bikes now have their own “Wallbox” I printed with supports, but if you have good bridging…
Holds this precision screwdriver set: https://www.amazon.com/gp/product/B09H2J4DM1 This may violate one of the Gridfinity Design Principals by keeping everything in the case, but I think the design of the case is what I like most about…
These are the abcs they are not caps. Category: Other
This screwdriver set (https://www.amazon.com/gp/product/B09H2J4DM1) needed to be on the Skadis board, so I drew up a quick model this morning to mount it.
Recommended Specs: Arms- T700 6mm Carbon Fiber Plates- Stainless Steel McMasterCarr fasteners
Bosch BCS220 Charger Wall Mount Bracket Keep your workspace clean and organized with this custom wall mount bracket designed specifically for the Bosch BCS220 Standard Charger . This 3D printed bracket securely holds the charger in place,…
These are basically the ABCs but all caps Category: Other
These are basically the ABCs but all caps Category: Other
l design the inserts for the iNGCO DBCS0031 Countersink Set. The parametric rugged box is remixed from @TheSameNameTwice . The inserts for the countersink bits I have created in Fusion 360 and the parametric rugged box I have remixed in…
A minimalist and clean wall mount holder for Bosch eBike chargers. Keep your garage or workshop organized with this custom-designed wall holder. It features a central cutout that keeps the original Bosch logo visible while securely…
These are the abcs they are not caps. Category: Other
At this point there are modules for the following SBCs: Raspberry Pi 4 Raspberry Pi 4 with Waveshare PI 5 adapter Orange PI Zero All designs contain holes for heat inserts
These are the abcs they are not caps. Category: Other
Collet free modified version of Umoya SuperBCAR from WaFfLe and ZaC I tried my hand at polishing up a few corners here and there, and tried to match the aesthetics of Rexfires Axiom. This is strictly only friction mounted, so you will…
Model of a MAC boost control solinoid i made for mock up
At this point there are modules for the following SBCs: Raspberry Pi 4 Raspberry Pi 4 with Waveshare PI 5 adapter Orange PI Zero All designs contain holes for heat inserts
A minimalist and clean wall mount holder for Bosch eBike chargers. Keep your garage or workshop organized with this custom-designed wall holder. It features a central cutout that keeps the original Bosch logo visible while securely…
