32 models
I love Matt-G's design, but the thin "hook" on the right side was a problem. As you can see in the attached pic, it failed to print at low resolution. So I opened the .step file in FreeCAD and beefed it up. Now it works GREAT! This remix…
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for one variant
So I printed this original for my son and he really wasnt that satisfied with it. His complaints were that it was uncomfortable to use because of the direction the 2 main wheels spin towards and away from each other. also he didnt like…
Print approx. €3.26–€3.98 excl. taxPreliminary estimate for PETGSource material: PET
A beefed up chain with stronger parts which will not break easily. Tested over hundreds of hours, printed with Sunlu ABS. No supports needed, print orientation as provided (opening for cables face down). Chain link with bowden tube…
Remix of a Remix
These are the parts that I've managed to break (so far). In each case, I added some material in the area that broke. I haven't managed to break the beefed-up versions but with my driving... :) Attaching the Front Bearing Hubs to the Front…
I had the original handle break so I modified it to be stronger. I also made it so a bigger spring fits in it.
Beefed up the Mk3 nozzle for printing with PC and making supports easier Print instructions Print with a temperature resistant material such as ABS or PC
Made the shroud beefier and easier to print. The RatRig logo is now a cutout instead of a bridge.
Remix of the original cable mount, since pulling a thick shielded cable for the ACC sensor put too much strain on the original mount. Mounts from 2 planes to the 3030 extrusion. Not the cleanest remix, but it works
This model is designed to be printed laying sideways. Use supports for the CV inner race slots. Do not use 100% infill as it will be too stiff and ruin the rest of the drivetrain.
Printing For stability use the following settings: PCTG or PETG for 0.8mm nozzle: 4 walls/perimeters 25% honeycomb infill for 0.4mm nozzle: 8 walls/perimeters 35% honeycomb infill In the .3mf I actually cut the model into two parts and…
Added ribs and thickened edges for a more robust top cover
This might be overkill but, I made the walls of the buckle thicker by turning them into a bevel from the bottom of the buckle to the top of the wall. I have no Idea if any of those buckles ever broke this way, but I figured I'd make the…
Pontiac Fiero Manual plate beefed up .2 layer height
this is a remix of www.printables.com/model/1190380-inline-filament-buffer-cfs-ams-helper-beta-version to use ECAS
These gears are a drop in replacement for the ones in the Rapidstrike gearbox. They are thicker and an uneven number of teeth gives them a more uniform wear, thus increasing longevity. A different gear-ratio will sligtly decrease the rate…
I liked the stand, especially with the remixed base but the top piece and the bottom stand were not connected very sturdily so I beefed it up a bit. I also cut it down to just 2 tiers.
Just the body and the Encoder cap. I also threw in a Logo front plate. Front plate was printed with 0.2 nozzle to come out nice. Get the rest of the parts from the original. Update: I managed to damage the USB port on my t114 so I made a…
Old design broke at 20% infill+4 walls in PETG, BEEFED up the design and upped to 30% infill. Still had problems with the design and the load cover was slugghish on return, V3 shortened the BEEFED tube to avoid any problems with the…
Ender 5 adjustable bed supports - remixed to use 8 mm steel rod. Original 6 mm rods bend too much to provide stable printer bed. 8 mm rods are better. Refer to original design for material bill and printing instructions:…
I migrated from A4T toolhead due to crappy fans I had (sleeve bearing was shot after 50 hours of 70C chamber printing on one fan). I got those fans for free, so I did not cry much nor I was gonna order fancy ones from USA from Fabreeko…
Super minor tweak. The original spot where the bed attaches and hinges on the base did NOT survive my 2 year old nephew. It snapped along the layer lines. I made it a tad beefier. Shouldn't need to reprint anything else but it MIGHT…
Just a beefier version of this Gopro mount because mine kept breaking.
I needed a way to contain my cables and also needed a stronger mount for my C270 with the lens attachment.
A stronger version of a good design by CookieBerlin.
Part is no longer symmetric, you need to print it mirrored as well. Recommended settings for Prusa MK3S printer parts apply. Therefore orange PETG, 20% gyroid infill, 0.2 quality setting.
Building off the support hook by Slash66, I needed a bit beefier version to print in TPU (better for shower). I made it thicker, and added another support since TPU looked sad without it. We use this to hold loofas and small things to…
This thing was made with Tinkercad. Edit it online https://tinkercad.com/things/3HrofEeyM3H This is a beefed up version of Lawsy's carriage modified by Boz to tighten up bearings. Beefed up and added a block for mounting end stop switch…
This thing was made with Tinkercad. Edit it online https://tinkercad.com/things/jdPn5RlYype I beefed up the area where the stepper motor bolts up due to problems I had with bending of the carriage over time. . This is based on Boz's mod…
Beefed-Up Z-Axis Constraint for RatRig V-Core 4.1 A slightly beefier version of the original Z-axis constraint for the RatRig V-Core 4.1. I've seen a few of the original parts snap when accidentally bumped or handled, so I decided to…
I love Matt-G's design, but the thin "hook" on the right side was a problem. As you can see in the attached pic, it failed to print at low resolution. So I opened the .step file in FreeCAD and beefed it up. Now it works GREAT! This remix…
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for one variant
Part is no longer symmetric, you need to print it mirrored as well. Recommended settings for Prusa MK3S printer parts apply. Therefore orange PETG, 20% gyroid infill, 0.2 quality setting.
