195 models
Check the hight of your headphone before printing this! You want your stand be some cm higher then your headphones. Feel free to give me a tip if you like it! :)
Print approx. €31.20–€38.13 excl. taxPreliminary estimate for one variant
Stunning sculpture of a life sized hand in a bionic style. An eye cathing art piece that truly shows the capabilities of 3D printing . Display on a shelf or mount it to a wall using the bayonet wall mount system. File includes left and…
Striking 3D printed spider table lamp — a bionic art night light for desk or wall, casting dramatic geometric shadows. Fits the tBulb B/S dimmable USB LED module (tBulb S recommended for wall mounting). id : se1008888 size : 255X134X321mm…
Printer Optimized recreations of the LEGO ball joint socket pieces used in Bionicle for limbs and hands. No more cracked lime green joints!
Here are most of the parts required to 3D print 300% scale Bohrok. I converted the files from .dat files found in the Stud.io library, as well as some from the BioPak and SioPak part library releases. My custom modeled krana holder and…
A selection of Lego CCBS compatible pieces. Attached pictures show examples of Bionicle MOCs build using these 3D printed arms and legs. I recommend to print in PETG (this is what I've tested). UPDATE. After few months the sockets got a…
The hand features a reinforced socked joint, axle hole for holding all sorts of things and a place for 4 fingers - you can either use original Lego snap on pieces or print mine, which are based on the Lego counterpart, but modded for…
Model TL;DR Recommended versions moup_titan_5.0_runes_new (large/symbols as seen in the render) moup_titan_5.0_smooth (large/no symbols) moup_5.1_villager_runes (small/symbols as seen in the render) moup_5.1_villager_smoot (small/no…
Print a unique and colourful tealight holder. Combine different colors and create one of a kind decoration. One-part version Solid single colored holder Two-part version Print both parts seperately in different colors and snap them…
This feet piece was moddeled after original Toa Mata feet, but with modificatons reinforcing the socket for the ball joint and decreasing amount of supports needed. I recommend to print in PETG (this is what I've tested). Print with…
This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System frame/"bone" elements produced by Lego from 2011-2016 for the Heo Factory and g2 Bionicle lines. All elements are compatible with one…
With just some nylon threads, 6 motors, and an Arduino, you can build your own hand. I'm also sharing the code. It’s more of an aesthetic solution, and it's also intended for robots. Here in action: When printing the fingers, set the…
Unlike the head these are less of a copy of the original parts, mostly because I gave myself the restriction of not modifying the frame, but also because I don't have most of the parts handy to measure things exactly. I'm not entirely…
This model is compatible with the lego system.
Cool wearable 3D-print of Winter Soldier's arm from the Marvel Cinematic Universe movies.
This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System armor elements produced by Lego from 2011-2016 for the Heo Factory and g2 Bionicle lines. All elements are compatible with one another, as…
The files available online from Stud.io parts packs were too low poly for my liking when increased to 300% scale, so I modeled my own version and split it into 2 parts for multicolor printing. To print both sections individually and glue…
Since today is 810nicle day I figured I'd model a Bionicle mask so here's my model of a Kanohi mask, worn mainly by the Toa Tahu. I would scale it around 300% percent when printing it(I'm not quite sure in the exact scale yet).I'll have a…
This model is compatible with the lego system.
This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System hands, feet, and armor accessory elements produced by Lego from 2011-2016 for the Hero Factory and g2 Bionicle lines. All elements are…
This model is compatible with the lego system.
I was testing a new topology optimization software, and having issues with a real life part, decided to try the simplest thing I could think of: A shelf mount. This part is optimized for maximum load with minimal material use. The…
The model for this piece available in the stud.io parts library was missing the notches for the Bohrok faceplate to latch into, so I modeled my own version based off of pictures of the original Lego piece. This model will require supports…
Missing some details compared to the original, but also ~60% of the size. Does NOT include tiny fragile Hau. Face requires supports, “eyes” shouldn't.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
CAN BE PRINTED WITHOUT SUPPORTS! The size of the model should fit almost all headphoen/headset sizes. If its to small for your headset or to big for your print area just scale the model.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a model of the mask of creation from the G2 Era of Bionicle. The model has 3 variants each fitting the G2 and G1 Skulls. Category: Toy & Game Accessories
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Minature robot hand. Single print in flexible TPU. Great fidget toy. Has it's own mini hand-cover printed in PLA. Push the base of the hand upwards and it opens the fingers, and then snaps closed. 4 fingers Stylised to look like Hero…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Here's my model of the Akaku mask from Bionicle, work by the Toa Kopaka. I would scale it around 500% percent when printing it(I'm not quite sure in the exact scale yet).I'll have a painting and post processing video up sometime. Check…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
A simple test for ultra lightweight and robust bionic wing design for Micro/Unmanned Aerial Vehicles and drones. It's directly printed onto a 0.1mm thick plastic sheet for a wing membrane. This specific venation pattern is that of a…
This model is compatible with the lego system.
This model is compatible with the lego system.
The new Tahu Cosplayer minifig is great - but it's missing proper sword. Print him a new one! Use: 0.15 layer PLA works good SLOW SPEEDS - like 15mm/s Project is not exact original Tahu fire sword replica - it has been modified to be used…
The Bionic OK Hand - Voronoi Style model is not only an artistic piece but also serves as an educational tool to demonstrate the structure and articulation of a human hand. The Voronoi pattern applied here gives the model a unique,…
This model is compatible with the lego system.
This is a plastic cover that goes on the Advanced Bionics UHP for the Marvel series cochlear implant processors. The originals are extremely brittle and cost a lot of money, therefore I want to print my own instead of buying replacements.…
Many people use the Uvex Bionic face shield for wood working. It is cheap and works well, but I always had my eye on the >$1300 face shields with integrated air filtration. Rather than plunking down the money, I decided to attempt a DIY…
Description Wall boards for presenting the collection of Kanohi and Krana masks from Bionicle sets from 2001-2003. The head models have been modified for 3D printing to ensure durability. I placed holes on the back of the board to hang it…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Der Bionic Table kann so Skaliert werden, dass er in jeden Drucker passt! Das Modell kann ohne Support gedruckt werden. Ich empfehle jedoch Support für den ersten Bogen. Das Modell auf den Fotos ist 230x230x350 mm und hält ein Gewicht von…
YouTube Video - link This miniature version of the iconic 2001 BIONICLE canister is designed to perfectly match the new CMF Tahu Cosplayer. It's a fun display accessory that captures the nostalgic look of the original Toa Tahu packaging…
Custom head piece to fit all of my masks compatible with the lego balljoint and socket (constraction) system Made in Blender i recommend using your highest accuracy/detail printer so the axel comes out the right size Print Settings…
This model is compatible with the lego system.
A fully organic version of the Kanohi Hau mask from Lego Bionicle Part of the Mata mask series ATTENTION: Compatible only with the Metru head piece You might have to adjust the model depending on your nozzle size Category: Construction Toys
This model is compatible with the lego system.
The sharp bend in the scales catches teeth, claws and blades and prevents them from piercing in between two scales. I designed this with a movement angle of 30° between two scales in both directions, so it takes about three scales for a…
Original ones didn't work well with my ender 3 pro and kobra neo. This part is edited for 0.4mm nozzle for easier printing on cheaper fdm printers
This model is compatible with the lego system.
Due to physics your delicious boiled egg just won't stay upright. Problem solved with this printed egg cup. The bionic design truly shows the capabilities of 3D printing. An egg holder design inspired by nature. Your chickens will love…
When I first printed Lucky 13, I noticed how similar one of the pieces was to a Lego piece i had lying around. I then had an idea: if Lucky 13 and Lego use similar ball and socket joints, then if I were to scale up the Lucky 13 parts, it…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Here's my model of the Mira mask from Bionicle, work by the Toa Lewa. I would scale it around 300% percent when printing it(I'm not quite sure in the exact scale yet).I'll have a painting and post processing video up sometime. Check out…
This is a set of pieces that can be used to recreate the Bionicle Mini - Toa Inika Jaller figure at 500% scale. This figure was released in 2006. All of the stl files needed to create this have been included in the "stl files" folder…
At Open Bionics , we are excited to share our modular wrist system designed for developing and interchanging prosthetic terminal devices. The system supports quick disconnect wrists like the popular USMC-style that is used by our Hero…
This model is compatible with the lego system.
This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System weapon and tool elements produced by Lego from 2011-2016 for the Hero Factory and g2 Bionicle lines. All elements are compatible with one…
I was really bored of the regular Kopaka Nuva shield, and I wanted to upgrade it. Enjoy! Comments welcome. EASY TO PRINT!
The base of the model is convenient for a color change. If you print this, make sure you have dry filament, as this model, like most Voronoi models can be stringy.; The gcode has a color change and a little organic support on the index…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This is remix of one of masks from here ____ Changes to original file: Scaled to ~800% to fit Prusa XL Painted supports for tree type - open in Prusa Slicer Mask oriented for minimising supports Mask pegs are separate gemetry Printing…
Filament holder that was topology optimized in Fusion 360. Fits a 25mm wood rod. Print the left holder mirrored. Check out my tutorial: https://youtu.be/hAGFkWkqocI Category: 3D Printer Accessories
General grievous head on bionicle joint
This model is compatible with the lego system.
Expressive/dynamic hand compatible with lego ball joints, i thought would be useful. In the photos the print has primer sprayed on top. Probably any print orientation requires supports so keep their placement in mind. I printed the hand…
Bring a touch of nature-inspired engineering to your desk with this Bionic Tablet and Book Stand . Featuring an intricate bionic pattern. The lightweight, organic structure is optimized for strength and stability, providing a perfect…
This model is compatible with the lego system.
This model is compatible with the lego system.
Has a bit lower movement range but it's stronger
This model is compatible with the lego system.
It's beam A 4m but with space for pin Included in: https://www.printables.com/model/1404798-various-custom-ccbs-pieces
A simple test for ultra lightweight and robust bionic wing design for MAVs. It's directly printed onto a plastic sheet for a wing membrane. Background The process is very similar to this study here:…
A simple test for ultra lightweight and robust bionic wing design for MAVs. Background The process is very similar to this study here: https://www.nature.com/articles/s41598-021-98242-y Venation Pattern taken from…
Shelly the Bionic Woman
This model is compatible with the lego system.
Anyone who builds an enclosure should remove the PSU from the printer and place it outside. Prusa supplies a brace model that is supposed to stiffen up the frame when you remove the PSU. I did not like that design very much, as it only…
