PČR - Policie České republiky
Prostý 3D model loga PČR, vytvořeno jako dárek, třeba se bude někomu hodit.
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
- Downloads
- 156
- Likes
- 5
- Rating
- 5
53 models
Prostý 3D model loga PČR, vytvořeno jako dárek, třeba se bude někomu hodit.
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
Remixed USB Splitter Case (Blicube BliKVM) with 3 Holes to see all outputs / inputs Support me at: Buy Me A Coffee
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Folding puzzle map of the Czech Republic divided into regions. You can adjust the size in PrusaSlicer - I adjusted it to 150%. Later I will add the option as a blind map without names. I see the use in education for children in the first…
Low Poly edition of the Czech Republic (CZ) Marker pins can set in place by heating the pin up with a lighter for a few seconds before pushing the marker into the map. In this model all elevations are square root scaled to reduce high…
Šablona České Republiky (template Czech Republic)
Every single piece of puzzle is an individual district. (Každý dílek puzzle je samostatný okres.)
EN: Jumper Wire Sorter - remix, with less material, faster print CZ/SK: Remix, kde som ubral material a zrychlil tlac.
Držák zadní blikačky na koloběžku
The Blika Pegboard Hook I made is a handy accessory for organizing stuff on Blika pegboards. It's easy to stick in the holes, and the design keeps things stable. Simple, durable, and perfect for keeping your tools in order. You can use…
Facing an issue with my yearly Beer Advent Calendar that it's sometimes hard to get to the cans if you have human sized hands. If your hands don't fit in those 65x65mm slots, this is the tool for you. Printed in festive Prusament Lipstick…
Print in multicolour or drop letter objects (to get embossed text). Top/bottom is compatible with origin of the remix, so you can mix one part from this remix with original part (if you don't want some text for example). Note : if you use…
This allows for mounting the BliKVM v4 Allwinner next to the BliSwitch v1 in a 10 inch rack. Fitment is very tight and you need to have at least 221 mm of horizontal space. For mounting the BliKVM v4, the included screws can be used. For…
Kraje Česká republiky. Dílky do sebe zapadají a tvoří skládačku. Možno tisknout dvoubarevně s využitím M600 příkazu (výměna struny).
A single slot shroud for the BLIKVM PCI-E card. Additional hardware is not required as it uses the included screws and fan. Now you can fit your PIKVM in your PC case next to another PCI-E card without sacrificing the additional cooling…
Znak ČS. republiky 1945-1960 pro SLA tisk.
Logo je rozdělené na několik částí, aby bylo možné použít různé barvy. Tisk doporučuji 0,1 z důvodu oddělení barev. Pro co nejbližší přiblížení originálnímu logu použijte tyto barvy a vrstvy: 0,00 - bílá 1,10 - černá 1,60 - šedá 2,10 -…
Diffuser for Lupine Blika headlamp. Works as well as protection during transportation or when mounted without use, e.g. while mountainbiking before sunset. The main reason for designing this product has been the very strong red light of…
Studenti si vytvoří 3D model krajů České republiky a přikládají na jednu ze tří slepých map České republiky dle schopností.
Update: added version with reinforced sides to prevent cracking due to vibrations. Backlight holder suitable for Kostka kickbike fender with 26 mm mounting distance. The original M4 bolts have to be replaced by their 4mm longer variants.…
Žáci si vytvoří slepou mapu České republiky a její kraje. Mapu si vytisknou a vyzkouší.
This is a mod of Nickatron's case with vents for the PiKVM V2. This has been modified to accommodate the commonly available BliKVM USB splitter. You can download the bottom half from Nickatron's model.…
Žáci se naučí používat program Tinkercad, modelovat terén ve webové aplikaci Terrain2STL. Zhotovený model České republiky slouží k ukázce členitosti terénu, vysvětlení měřítka mapy a vrstevnic.
Puzzle - Okresy ČR (Česká Republika) / Districts of Czech Republic Pokyny pro tisk: materiál PLA nebo PETG vrstva 0.20 mm QUALITY nebo 0.15 mm QUALITY výplň 15 % vzor Plástev 3 perimetry horní/spodní vrstvy 5/4 klasický generátor…
holder for red back light on rear Yedoo footbike fender - držák pro zadní blikačku na zadní blatník koloběžek Yedoo
Slepá 3D mapa, krajů České republiky s krajskými městy. Učební pomůcka nejen pro skautské schůzky a závody, ale vhodná i do hodin zeměpisu.
M5 nut inserted inside - vložená matička M4
Stroboblikač: https://pihrt.com/elektronika/287-ne556-policejni-stroboblikac-smd Category: Electronics
Vlajka České republiky se stojanem a cedulkou PRAVDA VÍTĚZÍ.
Žáci si vyrobí 3D mapu jednotlivých krajů České republiky, které pak k sobě skládají ve formě puzzle.
Remix of an existing system developed by @MarkK
Česká Republika(Czech Republic) Map
Tried to create a running Jack Russel so I can paint it to match our real pet ;) I use acrylic paint to apply color, works fine for me. There are two versions, one with and one without a stand. In regard to the stand, depending on the…
Background: We put a door into a frame that wasn't fitting for a door. So we needed to cut the slots for the hinges and the striking plate / slutblik into the frame. Additionally we had to cut the door, so the cuts for the hinge on the…
Print in PLA, no supports, multicolor, scale as desired; ENJOY!
Keychains. Created for funs of hungarian band "Republik"
A basic shelf bracket for a Blika tool cabinet. Currently used for light duties, but can be improved/strengthened. FreeCAD file provided for this reason.
Studentské projekty jsou publikované k prohlédnutí na webu Fakulty architektury ČVUT: https://www.fa.cvut.cz/cs/studium/ateliery/160-atelier-plicka-skrna/atelierove-prace?semester=2024-zs
PETG, bez podpor
Držák blikačky Moon Sport Nebula na helmu. Stačí jemně nahřát a přizpůsobit rádiusu helmy. Potom přilepit oboustranou nano páskou.
Krabička vytvořená na míru stavebnici blikače s tranzistory a LED diodami.
Žáci se seznámí s relativním pohybem Slunce a na základě toho si představí návrh slunečních hodiny ve volně dostupných programech. Žáci se seznámí s modelem slunečních hodin v programu OpenSCAD.
Blikvm v4 Allwinner Underside Mount. Just need zipties.
A friend of mine want me to make a sign for her customers which informs that there is only payment using BLIK or Cash. So here they are, maybe some of you will also use it :) There is pause add for non-ams printers to swap the filaments.…
Emblem of the Police of the Czech Republic / Znak Policie České republiky
Tvorba modelu opevnění – bunkr/řopík z dob Československé republiky.
This mount requires two M3 3mm or 4mm socket head cap screws Some BliKVM kits come with a wider (2 header) ATX module. The only mounts I have found are for the narrower, single header module, so I created my own for this wider module.…
Předmětem projektu jsou kartičky s názvy konkrétních pohoří a řek v nic pramenících. Žáci vyhledají významné řeky pramenících v českých horách. Navrhnou podobu základny s názvem jednotlivých pohoří a
The Blika Pegboard Hook I made is a handy accessory for organizing stuff on Blika pegboards. It's easy to stick in the holes, and the design keeps things stable. Simple, durable, and perfect for keeping your tools in order. You can use…