Bonsai wall art
bonsai wall art
- Downloads
- 9,724
- Likes
- 2,004
- Rating
- 4.74
460 models
I needed a mesh insert for my bonsai dish and I didn't want to buy a large pack of them online. This model can be printed, then trimmed to size if necessary. The holes are 3 mm wide, and should be suitable for gritty soil. I designed this…
Nice oval bonsai planter, bonsai pot. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion 360 files for full…
This project prints in 40! different pieces, all of which get super glued together. The project is delicate and requires patience and care. It however results in a very, very nice decoration piece.…
A blank, matte-white model inspired by the timeless art of bonsai. This DIY collectible distills the quiet beauty and meditative balance of miniature trees into a smooth, minimal form—perfect for slow, intentional painting and peaceful…
Printer settings: 0.4mm nozzle 0.2mm layer height I used support for the leaves, and tree support for the trunk Assembly: Assemble the leaves following the number on the branches and inside the leaves Use glue to lock it all together…
A nice round bonsai pot. Easy to print. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion 360 files for full…
Bisher habe ich den Bonsai Tisch nur im Miniaturformat gedruckt. Einfach auf die gewünschte Größe skalieren. Der Bonsai Tisch kann für den Druck in Teile geteilt werden, um ihn besser drucken zu können. Dann zusammen kleben.
The pots can be printed upright with support. I suggest using PETG for better reliability, but PLA will work too. Visible and invisible coasters are included. The invisible coasters are designed to fit under the pot in between the legs of…
Local bonsai farm told me I should probably put this one in a larger pot, so I designed my own, because why not. I've always liked hexagons and they really do well with 3D printing, so I just rolled with that. The little holes around the…
A simple and easy to print vase mode pot and planter for your plants. Best to print using dubble layered vase mode settings, using any filament you want. Happy printing :D
Add a touch of modern minimalism to your home or office with this Low-Poly Geometric Bowl . Designed with a sleek, faceted surface, it catches the light beautifully from every angle. Whether you need a stylish key dish by the front door,…
Bonsai Pot with Drip Tray, Drainage Mesh and Small Feet Looking for a modern, elegant bonsai pot? I was too — until I designed one myself! This set includes: A stylish bonsai pot with a drainage hole A matching drip tray to catch excess…
Der Boden kann jeweils getrennt gedruckt werden. Anschließend zusammen kleben. Ich musste es so teilen um ihn so klein drucken zu können. Wenn ich die Schalen in groß drucken müsste, würde ich nur die Füße abtrennen und anschließend unter…
With this version, the planter has been upsized to 125mm (4.5") , making it suitable for a wider variety of plants. The form remains true to its design roots, elevated by a base inspired by traditional Japanese stone lanterns . The base…
Easy to print with no supports The original file size is 150 mm height but you can print it smaller or bigger as you wish Happy printing!
There are not many options for small fine-toothed wood saws, especially for bonsai use. Inspired by other jigsaw handle models here, I designed this specifically for use with bonsai, featuring a curved handle with many different grip…
NEW BOWDEN VERSION (PICS BELOW) Changelog 4/09/19 Added Pictures 4/01/19 Added Electronics Case 3/19/2019 Organized file section / added print guide 3/17/2019 Added Bowden .3mf file (courtesy of PteroDancer) 01/28/2019 Added wiring…
Inspired by traditional Japanese design, this planter features an elegant Kumiko pattern, complete with a drip tray, sturdy legs, and a decorative outer shell. The plant's water tray has a small hole, making it easier to check the…
Files tested with the following slicers: PrusaSlicer 2.6.1 Orca Slicer 1.7.0 SuperSlicer 2.5.59.2 (Nightly Dev Build) Using the above slicers, I recommend using the .step files and following steps 1-9 Due to limitations in features in…
A twisted spirit bonsai to bring a touch of silent wisdom to your space. Printed as one piece. Simple, beautiful, eternal. Note: Be careful with support removal. Keep superglue handy for this project. Print Profile (Bambu Lab A1) Printer:…
Inspired by traditional Japanese design, I plan to design a series of Japanese bonsai. This planter consists of three components: the main bonsai vessel featuring a Kumiko pattern, a detachable drip tray, and supporting legs incorporating…
Printing: There are no special printing requirements, NO supports . For example 0,05-0,07mm layerheight, 4 perimeters, 100% infill. print max 3-4 layers.
This is my first 3d printed bonsai. It is actually two models that will need to be printed at the same time, but with different settings. This method can really be used to make any tree. I found excellent luck looking up models of dead…
Printed with Bresser Rex, standard settings. In most cases, you have to glue feets onto the bottom of the pots.
I could not find here a model of a bonsai soil scoop that would satisfy me, so I've created my own. The base has 5 cm of diameter. The height is 17 cm. Cut is at 45 deg angle. Enjoy!
The Tau Ceti Bonsai is an alien take on a classic form. Twisting growth, hollowed organic structure, and clustered canopy pods that feel more cultivated than natural. I designed this to sit somewhere between a bonsai and a preserved…
A beautiful square bonsai pot. Supporting Future Works and Commercial License https://www.patreon.com/deltaprints What material do I use for printing? https://amzn.to/46MY70E
This Bonsai Terrarium pot are for those who love indoor plants and Lord of the Rings. I had a lot of fun designing this and I hope you enjoy it too! === Print Settings: Nozzle - 0.4mm Layer Height - 0.10 Infill - 5-10% Supports Needed for…
A nice round bonsai plant pot. Print Settings: Layer Height - 0.2 Walls - 2 Infill - 15% 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week !🔧…
A mixture between traditional bonsai pots and modern 3d printing is brought together in this design, with a minimalist design to avoid distracting from the main character, the bonsai itself. Furthermore, the design is perfect for a…
Great curved bonsai pot with a drainage hole in the middle. An eye-catcher on your windowsill. Supporting Future Works and Commercial License https://www.patreon.com/deltaprints What material do I use for printing? https://amzn.to/46MY70E
Minimalist Home Decor for Calm Spaces
Easy to print. Can be made in pla, petg or abs. Can be scaled to desired size.
Bonsai or Plant Pot with or without Tray. Needed a larger planter for my Bonsai Tree so designed this one along with a tray to allow the water to run through. There are two versions of the planter, one with a few drainage holes (hence the…
This is a fertilizer basket for use on bonsai or any other potted plants. Now this was custom designed for a specific fertilizer pellet brand but it should work for granular fertilizer pellets as well. Gently squeeze the basket to spread…
This mold is 3D-printed in ABS. It is used for casting bonsai pots, either in concrete or ceramic. You pour the material into the bottom part, close it with the top part, and tighten everything together with bolts. extra material will get…
Meshes for bonsai pots or flower pots, round Ø 41,5 mm and square 41,5 x 41,5 mm
The flowing structure resembles intertwined branches, while the rearing horse silhouette symbolizes strength, growth, and energy . The design also connects naturally to the Year of the Horse in the Chinese zodiac , where the horse…
Summary I designed this model to take advantage of air pruning. Air pruning is a method where you add holes to a pot to let roots near the edge burn due to dryness. This lets plants develop healthier root systems and to grow faster over…
Nice designed Japanese table model fot your scale model or bonsai sdtand table. Please do not forget to take a look tot my other models and Like them if you download them. Other sites on demand.
You probably want supports under the base and to support the top of the handle. No supports inside! Photos show Prusament PETG Ultramarine Blue. There are baffles to reduce spillage. One fill is usually enough for my Bonsai. It takes more…
Printing: There are no special printing requirements, NO supports . For example 0,05-0,07mm layerheight, 4 perimeters, 100% infill. print max 3-4 layers.
A simple remix of https://www.thingiverse.com/thing:1509934 that does two things: split the tree in half to allow for printing without support create simple leaves that can be added to the tree
povoa • bonsai planter modern minimalist bonsai planter, that stands in a wrap around plate commercial licence membership available on my patreon ~ dimensions in mm larger ~ x • 208 · y • 138· z • 93 smaller ~ x • 156 · y • 103 · z • 70…
simple bonsai pot. use PETG to make it durable and water-proof, scale if needed. updated May/24/2024
Bonsai pot 02 rectangular (shohin), 185x135x70 mm, glue feet on the bottom or print the model in one piece.
The model is set face up against the plate in my printing profile, in order to benefit from the most beautiful side as in the photos.
Bonsaistand 02 - of miniature table - modelbuilding equipement. Other sites on demand.
✨ Welcome to My Printables Page! ✨ Thank you for stopping by! I put a lot of care and detail into creating this model, and I’m excited to share it with you. Each design is made with both function and aesthetics in mind so you can enjoy…
Uses a basket weave pattern for the perimeters, keeping it strong without sacrificing flow. Threaded base allows for a sturdy connection while avoiding FDM printed tabs which could be prone to breaking.
This is the first thing that i have modeled myself. I made this model as a gift and was really suprised how good it turned out, so in case you want to use it too, feel free to do so. I have hardly any experience with 3D printing, as i…
This pot has a grid of smaller holes in the bottom to improve drainage and tie-down possibilities. See The feet should be glued onto the pot after printing. I used cyanoacrylate to glue the feet. The pot can be optionally painted.
Printed with Bresser Rex or Prusa i3 MK3S+, standard settings. You have to glue feets onto the bottom of the pots.
Voronoi Key Holder Bonsai Tree a blend of functional art and modern design. This 3D printable takes inspiration from the intricate patterns of Voronoi tessellation, creating an exquisite key holder shaped like a bonsai tree. Crafted with…
simple bonsai pot comes with the planter base (optional) legs (optional) mesh (optional) print with 3-5 perimeters for strength this bonsai pot comes with huge holes in the bottom as it's meant to be soaked. which is why there's a 3d…
Printed the first version with PLA. Would advise you too use PETG for outdoor use.
This nightstand bonsai organizer includes space for glasses, a watch, wallet, phone, kindle, work ID, spare credit cards, and coins. It includes a slot for smaller change storage, a built-in phone charger and secret drawer. All pieces…
Printing: There are no special printing requirements, NO supports . For example 0,05-0,07mm layerheight, 4 perimeters, 100% infill. print max 3-4 layers.
This is a gear that's next to the motor drive in the shredder. My unit is the Bonsaii C156-D Dec 20 2018 made in China but will fit many China models that are home use with a 12 sheet max. Print Settings Printer brand: Creality Printer:…
Hello, feel free to print this universal bonsai tray which is about 200x150mm. I used Bambulab X1C and made fuzzy skin on the outer and inner layers but it's up to you. Feel free to like and comment what should I change.
Rock pot with 4 drainage/mounting holes in the base. I print this upside-down so that support locations to only be visible on the inside allowing the exterior to finish to remain unscathed.
Medidas Base: 100mm x 160mm Medidas Superior: 116mm x 176mm Category: Decor
Bonsai Tree Planter 6" Plant Pot Printed on Prusa Mk3s+ Material: Hatchbox PETG (Mint Green + Transparent White) Print Settings: Nozzle: .6mm Temp: Ext 245C Bed 85C Layer Height: .3mm First Layer Height: .3mm Supports: None
A bonsai pot planter with decorative bears and bamboo
This is a Pot I designed for my Bonsai it is quite a deep pot to give the roots room to grow. the pot has built in drainage so excess water spils out and dirt stays in without the need for anything else to be added. the legs of the catch…
voici un remix du pot bonsaï de @Bksba je l'ai redimensionné pour qu'il passe sur le petit plateau de la Prusa mini et j'ai également rajouté un effet bois sur toute les faces du pot (pour les pieds il suffit de les coller) ce pot à été…
Made By Kacey ✔ Download our STL files today and start printing! Our collection includes a variety of designs, from modern geometric pots to elegant hanging planters. All of our designs are perfect for succulents, bonsai trees, other…
Dekorace na Zed Bonsai,vytisknuto z PLA filamentu
A little support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.
I designed this Inarii Torii gate to be placed next to a bonsai tree to convey a sense of scale to the tree. I found an online carpentry course on the construction of a full size gate, which gave me the correct dimensions. If you're…
For cascade tables you have to glue feets, legs, ornaments and top together.
Dear all, I want to share with you "all in one" bonsai set designed w/o AI Models: Pot Mesh (grid) saucer Material - PLA, PETG (use more perimeters) With PRUSA MKIV S I set 110% scale to fill heatbed. If you are happy with my design,…
Printing: There are no special printing requirements, NO supports . For example 0,05-0,07mm layerheight, 4 perimeters, 100% infill. print max 3-4 layers.
Keeps the substrate in the pot while providing good drainage and aireation. Added a thinner version for the less deeper pots Can be build in PLA, PETG or a rigid filament of your choice. No special configuration needed
Transformed the 3mf files to separate stl files, Thanks for the design and Merry Christmas 2023
No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.
Bonsai pot with dish and feet. Japanese seasons inscription on 4 sides (Haru, Natsu, Aki, Fuyu). Dish and feet are separate to print without support (glue them in the holes)(Print 4 foot). No support needed on any of the parts.
A mesh tray to prevent soil from leaving the pot.
Bonsai pot 31 rectangular beveled 199x149x56mm, Support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is…
Support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.
I created this saucer in order to place it under my bonsai pot but, since a lot of bonsai are planted in this type of pot, I hope it could be useful for someone. I printed it in white PLA but it would be better in PLA Wood in order to…
Just a small mini pot you can print for this cool 3d printed model! Depending on what you want adjust the size! https://www.printables.com/model/343738-trimmable-bonsai
This is a large zen garden for a desktop. It has a larger pot for a bonsai tree as well as two small ones for shrubs. I included an optional arch. the internal tray sits on top of a drip tray to allow the water to drain out of the plants.…
Bonsai Tree Deep Roots Wall Art Scale and print as desired!
Two versions of a simple Vietnamese style bonsai pot. The pots are designed to look like the large cement bonsai pots in Vietnam. These pots are easy to print without supports and can be scaled to any size. Both pillars fit for both pots.…
Bonsai display table (No. 07) rectangular ornamented 200x140x28mm, best for bonsais with rectangular or oval pots. Feel free to scale up or down until you like the result and it suits your tree.
CHECK OUT THE NEWLY RELEASED ARCHITECTURAL PLANTER COLLECTION ! Inspired by the graceful curves and serene aesthetic of traditional bonsai trees and Zen aesthetics, this model offers a unique fusion of organic form and 3D printed art.…
A shallow pot for your bonsai. Print the feet (top side down is better) and super-glue them on. 2 versions: one has drainage channels for better drainage, the second version has a flat bottom. Category: Art
I used a layer thickness of 0.20mm and a fuzzy skin of 0.3x0.4 for a "stone look". The use of supports is required.
Just a small Bonsai pot that I gone done made to put my teeny tiny trees into. Shouldn't need any supports, but you will need to glue the feet onto the body. You might also need some drainage mesh to stop your lovely soil from falling out…
To multicolor please use ".3mf" files and set up colors in objects list. Remember to move away auto generated purge tower. Thanks to adding new layers on moon and crown of the tree, i was able to separate this elements and allow to set up…
Rectangle tray to collect water and dirt
Here is another version of a bonsai pen holder for those looking for a more natural desktop look. It takes a decent amount of supports, but they came off easily. Just cut the big support trees from the small ones before pulling them off.…
Wandbild Silhuette Bonsai, 4 Teile, mit Illustartor erstellt. In meinem Fall in der Größe 64 x 64 cm und 4 mm dick, je Teil 31 x 31 cm mit einem Zwischensteg von 2 cm, an den Ecken befinden sich 2mm Löcher für die Befestigung an der Wand…