Search results: bowens

Sort order

63 models

P
PrintablesMaurizio Lenzi

GoBo projector for Bowens mount flash (Godox MS300V)

A projector for GoBo that can be mounted on any flash (preferably one with a Led pilot light, such as the Godox MS300V). This is a personal elaboration inspired by the work of Petri Damsten ( http://petridamsten.com/gobo-holder/ ) and…

Print approx. €3.03–€3.71 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
601
Likes
93
Rating
5
P
PrintablesAdudino

Bowens Mount Reflector - Universal Bowens-Style Adapter for Lamps

Model Info | Introduction I want to introduce you to an easy-to-print Bowens Mount Lamp Reflector. I use it printed in PLA with my lamp up to 50% of the maximum wattage, and it doesn't melt or get soft. Save your money as these typically…

Print approx. €10.17–€12.43 excl. taxPreliminary estimate for one variant

Downloads
132
Likes
19
Rating
0
P
PrintablesJust_Adrian

Godox mount to mini bowens adaptor ml100i

Its my very first 3d model made because i found that there are no mount adaptors for the godox ml100i softbox lantern i bought, so i made one that works. I use it to adapt it to an Ulanzi C01 100w cob bi color light. Feel free to adapt,…

Print approx. €2.18–€2.66 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
1
Rating
0
P
Printableshasher.dk

Bowens Wall Mount

I needed to get some softboxes off the floor but didn't want to pack them all down, so I had to make a wall mount. This is my first 3D design ever, so if you have any suggestions for improving it, I'd be happy to hear from you. I have…

Downloads
528
Likes
30
Rating
5
P
PrintablesJpg90

Bowens Wall Mount Quick Print

Bowens Wall Mount that prints quicker! Print at 0,2 with 40% infill.

Downloads
471
Likes
38
Rating
5
P
PrintablesJacco

Remix: GoBo projector for Bowens mount and m42 lenses. Uses Godox GoBo's.

All credits go to original creator! I used alu tape to get a little bit more light out of the device as advised by original creator. Printed in PETG (gray) except the GoBo holder (PLA, black). Supports only used where the nuts go to…

Downloads
354
Likes
46
Rating
5

Bowens Softbox Wall Mount

This will allow you to hang your Bowens mount softboxes on the wall. You will need a single Spax ¼"x2.5" PowerLag screw to mount this into a stud. Supports required.

Downloads
303
Likes
29
Rating
5
P
Printableslysynski

mini Bowens COB protective cover

Description LED protective cover for mini lamps that have mini Bowens mounting system Print instructions Printing info: Printed on Prusa MK4S, PLA 0.25mm layers 40% cubic infill (higher infill to reinforce Bowens tabs)

Downloads
262
Likes
13
Rating
0
P
PrintablesCraig B

Bowens S Mount Honeycomb Flash Grid

A 3D printable strobe grid for the Bowens S-mount which is standard on a lot of medium or larger studio strobes. The length and size of the grid allows an approximately 20° cone. I would not suggest using this with a non-LED modeling…

Downloads
198
Likes
23
Rating
0
P
Printablesamoser

Elinchrom Speedring to Bowens Mount

Use an Elinchrom portalite softbox on an Bowens mount light

Downloads
198
Likes
11
Rating
0
P
PrintablesUSpaeker

LichtBeam - Projektionsvorsatz für Bowens Anschluß (Nikon Version)

Für mein Hobby der Blitzlichtfotografie wollte ich mir immer einen Projektionsvorsatz kaufen, leider sind diese meist recht teuer. Dank meines Prusa MK3S+ und Fusion360 konnte ich mir meinen Wunsch selber erstellen. Dazu habe ich gleich 4…

Downloads
182
Likes
38
Rating
5
P
PrintablesVelex

Godox and Flashpoint eVOLV Twin Head with Bowens Mount (AD-B2) cover

Print, like and share!! Bowens Mount cover, Flashpoint eVOLV Twin Head (AD-B2) and GODOX SL-100W

Downloads
162
Likes
14
Rating
5
P
Printables-Juicebox-

Bowens Mount Flash Cover- AD400

Designed to protect the bulb of a Flashpoint Xplor 400 or Godox AD400. Clicks into the bowens mount and covers the bare bulb. I wanted something to replace the 2 piece cover it came with because it kept falling off and I didn't want to…

Downloads
144
Likes
9
Rating
0
P
PrintablesFarrukh Pitafi

Bowens Speedring Adapter for Godox Foldable Softbox with S Bracket

Designed this in FreeCAD to fit Godox 60×60 foldable soft box that comes with an S-type bracket onto my Godox SL100D videolight. The FreeCAD (v0.16) source file is included. I've explained the whole process in this video:…

Downloads
137
Likes
24
Rating
4.5
P
PrintablesGatCode

Bowens Cap

This is a simple protection cap for my strobe because the original one was huge and not very portable. Print Settings Printer: Ender 2 Supports: Yes Resolution: 0.2 mm Infill: 20% Notes: printed in PETG Category: Camera

Downloads
131
Likes
18
Rating
3
P
PrintablesDaniel Thompson

Bowens to Beauty Dish Adapter

My partner misplaced his beauty dish's Bowens adapter, so I remixed one from https://www.thingiverse.com/thing:3048080 to replace it and fixed a few problems they had with the original one they had bought. The supplied STL uses the…

Downloads
112
Likes
12
Rating
0
P
PrintablesRoart

7in Bowens Reflector with Diffuser and Grid

7 inch ABS/ASA is ideal for constant lighting PLA and PETG will work fine for strobes Diffusers can be printed in White, or ANY color! Grids best printed in Black Reflector best printed in black and painted white, gold or chrome inside!…

Downloads
110
Likes
15
Rating
0
P
PrintablesSocialmocracy

Reflector Bowens Strobe Mount

This is a smaller reflector modifier for Bowens-style mounts. The opening is 77.2mm. I wanted to mount 77mm filters to block different types of light from VIS to IR and UV. I used some 2-inch aluminum tape on the inside.

Downloads
105
Likes
23
Rating
0
P
PrintablesZneuzity

Bowens mini cap

This Bowens Mini cap offers reliable protection for your gear during transport or storage. The cap easily twists into place for a secure fit, ensuring your equipment stays safe from damage. The design allows for effortless removal of…

Downloads
100
Likes
6
Rating
0
P
PrintablesMAltmann

Standard Bowens Diffuser Ball

Inspired by CheerioBro's Mini Bowens version. The original version is not capable with standard Bowens mount. Here is the solution. Support is not needed but remember to print the outer wall first to avoid floating part. Enjoy❤

Downloads
100
Likes
13
Rating
0
P
PrintablesSteinhose

Bowens to SMDV Softbox Adapter

An adapter for the SMDV Speedbox-60. Im Using this with a Shenghui CY-8300, but this should be compatible with all bowens compatible lamps. Printing with - PTEG - 10% Infill - Tree support auto

Downloads
96
Likes
6
Rating
0
P
PrintablesLuca Vascon

Bowens-godox flash connector

godox-bowens base connector Category: Camera

Downloads
95
Likes
13
Rating
5
P
Printableslysynski

mini Bowens speed ring for Godox light modifiers

Description mini Bowens mount speed ring for Godox light modifiers (soft box) Print instructions Printing info: Printed on Prusa MK4S, PC 0.20mm layers 50% cubic infill PC or other high strength filament needed to support weight of light…

Downloads
81
Likes
3
Rating
0
P
PrintablesSir Makes a Lot

Bowens mount gel holder for speedlights

I was tired of clamping giant gels to my speed light, so I made an adapter that helps direct the light and accepts smaller gels, which can be cut from larger ones. If you have any suggestions please let me know!

Downloads
80
Likes
10
Rating
0
P
Printables05_spezi

Bowens Snoot

I designed this Bowens snoot because I wanted more controlled, focused light without buying another modifier. Sometimes you just need a tighter beam — for background highlights, rim light, product details, or adding contrast — and a…

Downloads
78
Likes
7
Rating
0
P
PrintablesD_Y

Bowens adapter (standart four screw softbox to bowens)

I've printed it with ABS. No Supports needed. Resolution: 0.22 Infill: 50%. - If you enjoy my 3D models and want to support my work, feel free to donate via PayPal . Every contribution helps me create more content. Thank you for your…

Downloads
77
Likes
14
Rating
0
P
PrintablesRoart

7in bowens Lantern

7 inch ABS/ASA is ideal for constant lighting PLA and PETG will work fine for strobes Lanterns can be printed in White, or ANY color! Settings Lanterns - 2 walls 10% infill

Downloads
71
Likes
15
Rating
5
P
PrintablesTeketa

Bowens mount to speedring adapter

Adapter to mount softbox with a speedring to Apature Amaran 150c with a bowens mount It prints very well, and even has that nice click when used on the 150c Print settings I've used ABS to print this, since the 150c can get quite hot, and…

Downloads
68
Likes
8
Rating
0
P
Printablessara.l

Bowens mount for Flashpoint eVOLV Twin Head flash

A simple and durable Bowens mount cover to protect, in this case, the bulbs in a Flashpoint eVOLV Twin Head flash. This could be used in other Bowens mount compatible flashes as long as it clears the bulbs. Print Settings Printer Brand:…

Downloads
66
Likes
5
Rating
0
P
PrintablesД Л

Adapter mini Bowens Mount to Bowens Mount

Adapter mini Bowens Mount to Bowens Mount

Downloads
65
Likes
5
Rating
0

Bowens Wall Hook

This is a simple hook which allows to hang Bowens compatible light modifiers to a wall. The benefit of this hook compared to other rotate&click-style Bowens wall mounts is that one can simply hang the softbox onto it while still providing…

Downloads
64
Likes
6
Rating
0
P
PrintablesKevin Valverde

Light proyector Bowens mount

you will need a Metal Rear Lens Reverse Protect Filter Ring for “(lens brand)” Macro Shoot 52mm This is the final result:

Downloads
64
Likes
15
Rating
0
P
PrintablesCVABuck

Bowens Mount 35MM Slide GOBO for Impact and Godox with Nikon Lens

Two-piece 35mm slide GOBO for Nikon lens and Impact or Godox strobes. This allows the use of any 35mm slide or patterned transparency mounted in a 35mm slide as a GOBO for creative lighting effects. This was one of my first designs in…

Downloads
62
Likes
8
Rating
0
P
PrintablesRoart

Skull Light Diffuser Bowens Mount

this is really just a prop for halloween photos light shnes into the back of the skull and it makes the skull glow print in any color, i used transparent

Downloads
59
Likes
19
Rating
0
P
PrintablesScott Henderson

LichtBeam - Projection attachment Bowens Mount (Nikon Version)

Printed with PETG on my ender 3 with good results. Modified so that I didn't need to use supports on a few of the trays- Print the housing Bowens adapter side down with no supports (some stringing under the plate holder happens that is…

Downloads
46
Likes
3
Rating
0
P
Printablesnapbaer

mini Bowens mount hex grid, 6mm magnets

i could not find that many models for Bowens mini mount so i made this

Downloads
45
Likes
3
Rating
0
P
PrintablesRed Dot Geek

Andoer 60W Tri-Color Video Light Mini Bowens

A super lightweight mini Bowens mount I made for the Andoer 60W Tri-Color video light and Ulanzi barndoors. Now I envy those who have a proper 3D scanner… PRINT NOTES Tree supports required, on print bed only. Preferably PETG or tough…

Downloads
45
Likes
10
Rating
0
P
PrintablesCHEBUGRESK

protective cap for Bowens cap - V3

sprotective cap for Bowens cap !!! WARNING: CAP ONLY FOR PROTECT LIGHT, REMOVE CAP BEFORE TURN ON LIGHT, CAP CAN MELT !!! I designed this cap for my AMARAN 300X, because i dont have original cap in box cap compare with all bowens light…

Downloads
44
Likes
4
Rating
0
P
Printableseyeron

Bowens Wall Mount with Support Holes

I don't have the best luck with support originating from anywhere but the bed so I remixed it in TinkerCAD. Worked well!

Downloads
43
Likes
8
Rating
0
P
PrintablesSir Makes a Lot

Bowens Mount Adapter

This is a thing in progress! I have thought of some improvements that should help assembly a lot! How I Designed This Here's the story on TikTok Part 1: https://www.tiktok.com/@sir.makes.a.lot/video/7061320036945923375 Part 2: Category:…

Downloads
39
Likes
3
Rating
0
P
Printables05_spezi

Softbox to Bowens Adapter (Round, 4-Screw Mount)

I designed this adapter out of necessity. I had a softbox with a round mounting plate secured by four screws , but all my lights use a Bowens mount . Instead of replacing the softbox, I decided to design and print an adapter that makes…

Downloads
37
Likes
5
Rating
0

120 Film scaner for Godox Bowens reflector

This is medium format (120) film scanner I made for Godox SL60W LED light with Bowens reflector (17cm). It just snaps on reflector, and you can use camera on tripod to "scan" your film. Diffusor should be printed with white plastic.

Downloads
37
Likes
2
Rating
0
P
PrintablesTomek Urbański

Mini Bowens CAP

Opis do zaślepki? Co tu opisywać :)

Downloads
35
Likes
3
Rating
0
P
PrintablesRoart

7in Bowens Softbox with Grid and Diffuser

7 inch ABS/ASA is ideal for constant lighting PLA and PETG will work fine for strobes Diffusers can be printed in White, or ANY color! Grids best printed in Black Soft box best printed in black and painted white, gold or chrome inside!…

Downloads
31
Likes
3
Rating
0
P
PrintablesiAndrux

Bowens adapter to SMDV octabox

Replace speedlight adapter.

Downloads
27
Likes
5
Rating
0
P
PrintablesNick SS

Bowens Mount Backdrop reflector

This is inspired by commercially available backdrop reflectors. There are many examples available ranging from $20 to nearly $600. I figured that $5 worth of filament and electricity was a good deal! This is used to light up backdrops,…

Downloads
19
Likes
3
Rating
0
P
PrintablesJúnior Foppa

Grid Colmeia - Para Ulanzi fresnel condenser 40w mini bowens

Difusor em grade para modificador ulanzi mini bowens

Downloads
15
Likes
3
Rating
0

Modifiable Bowens mount reflector adaptor

I bought a great light and had an old reflector hood, however the hood mount is missing so I took a CAD model and modified it accordingly. The affordable light was purchased on Ali: https://s.click.aliexpress.com/e/_oDBSpAd P.S. the link…

Downloads
13
Likes
2
Rating
0

Speedring to Bowens Mount

I added 90 degrees holes between original holes to make soft box tighter. Holes are 3.5mm. If someone needs wider, please write.

Downloads
13
Likes
2
Rating
0

Bowens-Umbrellafix,Flash

this is a Umbrella fix for a bowens reflector ø 15,5 cm see also my pictures made in tpu 95A I fixed it on the reflector with poptongs.

Downloads
12
Likes
4
Rating
0
P
PrintablesJust_Adrian

Godox mount to mini bowens adaptor ml100i ver 2 mini

its the newer more better vers of the first one that is on my profil

Downloads
9
Likes
1
Rating
0
P
PrintablesMixed Gears

Bowens Adapter for Bowens and Wafer Softboxes

A friend needed an adapter for his Quadralite Atlas 600 TTL studio flash for attaching something on and then this design was created. Print Settings Printer: Print Rite DIY Rafts: No Supports: Yes Resolution: 0.22 Infill: 40% Notes:…

Downloads
7
Likes
0
Rating
0
P
PrintablesDom V.

Bowens Godox Neewer sofbox adapter

replacement for S bracket - for bowens strobes or other lights tight fit, holds well print with supports so it doesn't snap when mounted

Downloads
7
Likes
3
Rating
0
P
PrintablesLynxTassi

Parabolic reflectors and attachments for Yongnuo 100/150 and others, mini-bowens bayonet mount.

These parabolic reflectors allow for forward-facing beams. They are designed for the Mini-Bowern mount, which is used on LED light sources from Yongnuo and others. Several parabolic curvatures are available, as well as a protective cover…

Downloads
5
Likes
3
Rating
0
P
Printables

Softbox to Bowens Adapter (Round, 4-Screw Mount)

I designed this adapter out of necessity. I had a softbox with a round mounting plate secured by four screws , but all my lights use a Bowens mount . Instead of replacing the softbox, I decided to design and print an adapter that makes…

P
Printables

Bowens Snoot

I designed this Bowens snoot because I wanted more controlled, focused light without buying another modifier. Sometimes you just need a tighter beam — for background highlights, rim light, product details, or adding contrast — and a…

P
Printables

Speedring to Bowens Mount

I added 90 degrees holes between original holes to make soft box tighter. Holes are 3.5mm. If someone needs wider, please write.

P
Printables

Parabolic reflectors and attachments for Yongnuo 100/150 and others, mini-bowens bayonet mount.

These parabolic reflectors allow for forward-facing beams. They are designed for the Mini-Bowern mount, which is used on LED light sources from Yongnuo and others. Several parabolic curvatures are available, as well as a protective cover…

P
Printables

Bowens adapter (standart four screw softbox to bowens)

I've printed it with ABS. No Supports needed. Resolution: 0.22 Infill: 50%. - If you enjoy my 3D models and want to support my work, feel free to donate via PayPal . Every contribution helps me create more content. Thank you for your…

P
Printables

Standard Bowens Diffuser Ball

Inspired by CheerioBro's Mini Bowens version. The original version is not capable with standard Bowens mount. Here is the solution. Support is not needed but remember to print the outer wall first to avoid floating part. Enjoy❤

P
Printables

Bowens-Umbrellafix,Flash

this is a Umbrella fix for a bowens reflector ø 15,5 cm see also my pictures made in tpu 95A I fixed it on the reflector with poptongs.

P
Printables

Nanlite FM mount mini bowens cover cap

I've made a 2.0 version wit NO supports: Printed this flat side on the table with painted supports for the fm mount mini bowens bayonett parts, 0,24mm layers 15% gyroid infill PLA basic