Search results: cabel

Sort order

197 models

P
Printablessh

Earbud/headphone Shirt Clip (for cabel allowed to move back and forth in the clip)

I needed this remix for my wife :) She hated cable position being clipped without a chance to move (as it is tighten in the original from Ben G. [thanks for the design!]) So here: the cable is going inside, where the t-shirt is being…

Downloads
507
Likes
34
Rating
4.5
P
PrintablesCikro

Strain relief for cabels

Strain relife for cabels. Cables could be fiexd with a zip tie. Strain relife is screwable. Printable without support.

Downloads
27
Likes
6
Rating
0
P
Printablesbwmartens

Cabela's Alaskan Guide Cot Foot Pad

Cabela's Alaskan Guide Camp Cots come with rubber feet but they're just small enough that I worry about them making a hole in the bottom of the tent. I used to try to put cardboard under them but now I've replaced them with these printed…

Downloads
26
Likes
4
Rating
0
P
Printablesdavidkuhn

Cabelcuff, Cabel tightener / cable Clip

As the name in the Title might suggest, this is the Cabelcuff its a cable organizer/tidier to doing the same job, that a zip tie or a wire wrapped around your cable bundle would do, but quicker, reusable, 3d printed and with a really…

Downloads
3,565
Likes
779
Rating
4.84
P
PrintablesAlejandraR57

Spotify Keychain with Artist Name (Multiple Artists), Camila Cabello, Katy Perry, Taylor Swift, Bad Bunny, The Weeknd, Lana Del Rey, Morat, BTS, Jesse & Joy, One Direction, Peso Pluma, Metallica, 21 Pilots, Olivia Rodrigo,THE 1975, etc.

Y accept requests for another artist, song or playlist that's not on the list, It'll be the same base for them. Artists: Camila Cabello Katy Perry Taylor Swift Bad Bunny The Weeknd Lana Del Rey Morat BTS Jesse & Joy One Direction Peso…

Downloads
1,367
Likes
148
Rating
5
P
Printablesbenedikt314159

Cabel Duct

General and use case This model is a cable duct designed especially for workspaces with frequently changing setups. It doesn’t require zip ties or any other permanent method to hold cables in place. The teeth allow you to twist and…

Downloads
610
Likes
359
Rating
5

EV cabel type 1 holder

Holder for cabel and type 1 EV charger connector. Petg is probably a good choice of filament.

Downloads
605
Likes
39
Rating
5
P
PrintablesTobbii

cabel holder clip

3x/ 6x D max. 8 mm D min. 3,5 mm

Downloads
588
Likes
39
Rating
5
P
PrintablesJessè Jansen

Ender 3 V2 Cabel_Chain

This is my version of the Cable chain for the Ender 3 V2. For the X till the print bed you need 11 cable mounts. For the YZ till Z mount you need 23 cable mounts. For the extruder till the hot end you need 16 cable mounts. So a total of…

Downloads
557
Likes
111
Rating
5
P
PrintablesIceaac

Cabel Spool Cabel Organizer Cabel Reel

I wanted to create my own cable reel that was stable and easy to print and use. I think I succeeded quite well when the two parts are printed, they fit into each other, place the cable in the gap and twist the parts towards each other.…

Downloads
486
Likes
47
Rating
4.5
P
PrintablesEinfach Felix

Gridfinity cable organizer BIG cabel (2x3)

This can hold bigger cabels than my other holder . The Lable shelf in the image is 8mm to wide. to conform to gridfinity standarts, i fixed it for the file

Downloads
469
Likes
63
Rating
5
P
PrintablesRadim

EarPods case with cabel lock

Primary for EarPods, but for other headphones too. Perfectly fits in iPhone box. Cable lock tutorial: https://youtu.be/Ntaw8hiONeI Inspired by Apple Inc. Print instructions 3D model doesn't need supports

Downloads
459
Likes
47
Rating
5
P
PrintablesSuperTed

Cabela's Dry-Storage Ammo Box 12 Gauge Storage Trays

CLICK HERE If you're looking for 12ga storage trays for a standard M19A1 .30 cal ammo can! CLICK HERE If you're looking for 12ga storage trays for a standard M2A1 .50 cal ammo can! Some manufacturers sell their shells in boxes that are so…

Downloads
445
Likes
80
Rating
0
P
PrintablesKD95

Cabel Holder Neptune 4 series

Just a simple chain holder im modify from some one i dont remember So sorry enjoy

Downloads
396
Likes
90
Rating
4.5
P
PrintablesRepoholy

Cabel Management Collection for HSW

Simple Cable management system compatible with honeycomb storage wall - for cables with a diameter from 4.5 mm to 8 mm. You will always need a base part and a top part (you can choose between smooth and textured). The system is based on…

Downloads
392
Likes
112
Rating
5
P
PrintablesChristian

Earphones cabel holder

Earphone cabel holder / cabel organizer

Downloads
375
Likes
25
Rating
4.67
P
PrintablesLubos

Cabel Holder with screw hole

Holder for 230 V cable ( d = 6.8 mm ). Also fits for thinner cable ( d = 4.2 mm ). Hole for countersunk screw d = 3.5 mm . Screw in the photo: 3.5 x 16 mm. They are here two version of holder - for two cables and for single cable. I use…

Downloads
292
Likes
31
Rating
0
P
Printablescat_on_pot

cabel holder

new version of cabel holder with more holes

Downloads
270
Likes
20
Rating
4
P
Printablese1337e weazel

Z mount (cabel) for Elegoo Neptune 4 PRO STL_V2.stl

Just a fix for the connection between the two mainparts. No need to glue it anymore.

Downloads
245
Likes
15
Rating
5
P
PrintablesNastra

Creality K1 Printhead cabel holder

Improved cable routing with cable ties

Downloads
205
Likes
30
Rating
5
P
PrintablesRoland

Cabel holder wall mount

print, drill, be happy

Downloads
178
Likes
20
Rating
5
P
PrintablesAlex Renteria

PIN DE ABEJA PARA EL CABELLO

Bonito clip o pin para el cabello con forma de Abeja, facil y rapido de imprimir

Downloads
175
Likes
35
Rating
0
P
PrintablesJan Hájek

cabel holder

holdink cabel

Downloads
172
Likes
12
Rating
3
P
PrintablesPetr Bojar

Under table cabel holder

Simple cable organizer under the table. Organizes cables mainly keyboard and mouse.

Downloads
171
Likes
24
Rating
5
P
PrintablesGloomsen

Cabel Bend protection

A small collection of bend protectors for replacement on old joysticks when replacing cables. Each protector must be adapted to the respective cable separately, because there was hardly a standard in the old times. best use with TPU

Downloads
162
Likes
38
Rating
0
P
Printablesriceroll

Scepter 8499 Stopper Cap for JS1710 Cabela's Jerry Cans

can be printed right side up or upside down with supports. infill: 15% material: PLA

Downloads
160
Likes
5
Rating
5
P
Printablesvvzvlad

Pass-through in furniture for cable (cablesunk/grommet/cable gloryhole/cabeldurchführung) RJ45 ready

Sometimes you want to run a wire through a shelf in your closet, but if your shelves are made of particleboard, the hole will be unsightly and sawdust will fall from it. It's even worse when you need a large hole, such as for an RJ45 plug…

Downloads
158
Likes
17
Rating
5
P
PrintablesLeo

cabel clip

A simple fast printet Cable Storage.... I designed 3 Variations; one for bigger!!! cables (15mm version); one for normal store of the normal smartphone charching wire (11mm version); one for thinner cables (10mm) - (I mean the normal…

Downloads
156
Likes
35
Rating
5
P
PrintablesJonas

Cabelbox /cable enclosure

Box to cover/contain the cabels under Einsy base and door. Print instructions First i will state the print is not perfect to use right away. With app. 12 hours printing experience i have much to learn. Add supports in the square section…

Downloads
155
Likes
18
Rating
5
P
PrintablesTech Tick

Cabel Oranizer - Cable holder

Hi! I created this model to help organize my cables. Model is printed as one object.

Downloads
153
Likes
20
Rating
4
P
Printablesduathrim

Phone holder skadis + cabel holder

This is a model in which you can place a mobile phone. This model is designed for IKEA SKÅDIS , so it holds nicely. The model measures 84mm x 25mm x 60mm, and it should fit most phones. There is a grid at the bottom for better cooling,…

Downloads
130
Likes
16
Rating
5
P
PrintablesDr_Eamy

Cabel clip

Will fitt up to 5mm cabel. 3mm Screw hole. Smal cabel clips i need for the home built arcade cabinet.

Downloads
129
Likes
12
Rating
5
P
PrintablesBlackbird

Filament guide and cabel-holder FLSUN V400

Holder for filament tube and cable of the FLSUN V400. Udate: There is now also a sleeve-version available which fits well if one get rid of the friggin “protection”-hose! Prints well without supports, brims might be helpful. Sits nice on…

Downloads
126
Likes
16
Rating
5
P
PrintablesSlince

u-clip 35MM for cabels (speaker pole or stand)

(⚠⚠)(it's still a creation)(⚠⚠) links from inspiration https://www.bax-shop.be/nl/statief-onderdelen/innox-u-clip-kabel

Downloads
125
Likes
9
Rating
0
P
PrintablesTrigentor

Cabel comb

A cable comb tool for managing and organizing cables

Downloads
125
Likes
13
Rating
4
P

Kabelwanddhalter (Wallmount Cabel Holder/Hook)

Wandhalter für Kabel und Schläuche in verschiedenen Größen (50x50, 80x80 und 50x80) und mit verschiedenen Befestigungsbohrungen (Version X.0 mit Flachsenkungen (z.B für Linsenkopfschrauben) und die Version X.1 mit Kegelsenkungen (z.B. für…

Downloads
120
Likes
16
Rating
5
P
Printablescat_on_pot

cabel holder

Cabel holder with thread so cabel dont get out

Downloads
113
Likes
14
Rating
0
P
Printableswiktor pł

VGA IOS AND ANDROID USB-C / LIGHTNING PROTECTION CABLE version for longer cabel

VGA IOS AND ANDROID USB-C / LIGHTNING PROTECTION CABLE version for longer cabel

Downloads
110
Likes
12
Rating
0

Cabel Holder CableGuard - Sicherer Flachband-Kabelhalter für Elegoo Neptune 4

Dieser selbst 3D-gedruckte Flachband-Kabelhalter wurde speziell für das Drucker-Portal mit dem Hotend des Elegoo Neptune 4 3D-Druckers entwickelt, um eine verbesserte Kabelführung und Sicherheit zu gewährleisten. Mit einer schnellen…

Downloads
104
Likes
9
Rating
0
P
PrintablesCikro

Cabel Clip for Cage Nuts

Cable Clips that fit into squares for cage nuts. Can be used for server or control cabins, for example. Printable without support (sidewise).

Downloads
100
Likes
18
Rating
0
P
PrintablesOvland3D

Skadis USB cabel holders

for skadis board system. Intended for and holding Usb cables and other cables. The Holders is printed on an Ender 5 plus and can hold from 5pcs to 17pcs, nozzle 0.4, layer height 0.2, 20% infill, with supports. The Hooks is printed on an…

Downloads
91
Likes
8
Rating
0
P
PrintablesJerry

The USB-C cabel protection

Hello, This is my new model of USB-C cabel protection. I made it, becauce I know that many of these cabels broke while using. Soo if you want to print this model, here are some important informations about this model. This model fits only…

Downloads
90
Likes
6
Rating
0
P
PrintablesNastra

Creality K1 Motherboard cabel cover for straight Z belt guide

The newer K1 models have a different orientation for the Z-belt guide. The supplements @Henlor K1-Motherboard-relocation

Downloads
87
Likes
27
Rating
0
P
Printablescottec

Filament guide and cabel-holder FLSUN V400

In general I really love the idea but I didnt want to add too much weight to the printhead. The original model is roughly 10g. I've designed it entirely from scratch an made it a lot lighter by halving the weight down to 5g. Also added a…

Downloads
87
Likes
12
Rating
5
P
PrintablesSteveW91

Cabel Clip

Cabel Clip with a flat base, can be used with double sided tape. Cabel clip with a 10 mm hex base that can be held in place in a hex screw Category: Tools

Downloads
84
Likes
4
Rating
0
P
PrintablesPetr Bojar

Under table cabel holder V.2

Simple cable organizer under the table. Organizes cables mainly keyboard and mouse. (The variant where only one screw is needed)

Downloads
82
Likes
11
Rating
5
P
PrintablesKikeMaker

Soporte bandas de cabello - Headband Holder

Soporte de dos niveles de diferentes alturas para colocar bandas de cabello. NO requiere soportes. Una vez impreso se debe ensamblar utilizando pegamento para el soporte inferior y un tornillo para el superior. Incluí un archivo para…

Downloads
76
Likes
20
Rating
5
P
PrintablescSandra

Cabel Vase

The vase in the photograph was printed at 30% scale with Inland Wood PLA on a CR10 mini with dual z axis, MicroSwiss extruder and hotend, and borosilicate plate. 0.4 nozzle, 215° nozzle, 60° bed, 3 perimeters, “Use Adaptive Layers” checked.

Downloads
76
Likes
18
Rating
0
P
Printablesstr0gg

laptop power cabel insert

Keep laptop power cable on the wall instead of the floor when disconnecting. Print like other honeycomb storage parts.

Downloads
75
Likes
25
Rating
0
P
PrintablesIndy

USB-C cabel organizer

USB-C cabel organizer

Downloads
73
Likes
9
Rating
0
P
PrintablesKilometros
18+

The source marked this model as adult content.

Downloads
71
Likes
17
Rating
0
P
PrintablesMR3D

Removedor de cabello V2. Hair Remover V2.

Esta es una versión más sencilla y flexible de mi anterior removedor de pelo https://www.printables.com/es/model/528509-limpia-pelos-ducha-shower-hair-cleaner . Recomiendo imprimir a 0,15 y 60% de relleno mínimo. This is a simpler and…

Downloads
70
Likes
4
Rating
0
P
PrintablesAinon3Dtisk

Cr6 SE/Max bed cabel clip creality original velikost

Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Mám tu pro Vas original reseni drzeni cabelu od bedu do zakladove desky pro tiskárnu Cr6 Max. Budete potřebovat sroub M3x10 Tisknuto bez podpor Preji pekny zbytek dne

Downloads
63
Likes
11
Rating
5
P
PrintablesAlexander

Amzone Echo Dot 5 power supply cabel cover

Cable box for the Echo Dot 5 power adapter Supportfree power adapter with this dimensions: 70 x 41 x 38mm (approximate)

Downloads
62
Likes
17
Rating
0
P
PrintablesAK

Splitt cabel gland 1/2’’ NPT to 5mm

Splitt cabel gland for 1/2″ NPT equipment. 5mm hole for cable. Printed in PETG using a 0.4 mm nozzle and 0.2 mm layer height. Place on flat hex side. No need for supports.

Downloads
62
Likes
31
Rating
0
P
Printablesbwmartens

Cabela's Camp Cot Foot Pad

Cabela's Camp Cots come with rubber feet but they're just small enough that I worry about them making a hole in the bottom of the tent. I used to try to put cardboard under them but now I've replaced them with these printed foot pads.…

Downloads
61
Likes
7
Rating
0
P
PrintablesPEA

Cabel Holder Normal

Remplissage à 100% 100% Filling 100% Füllung Einstellungen Normal Geschwindigkeit 1

Downloads
61
Likes
1
Rating
0
P
PrintablesCamelXP

Flat Wago bracket / holder, electric cabel concentrator

I needed a holder for connecting electrical wires in my winter garden. It had to be flat to fit inside a purlin and have a way to secure WAGO connectors. Cables can also be fastened with zip ties. Maybe it will be useful to someone else…

Downloads
60
Likes
22
Rating
0
P
PrintablesMaWoKo_3D_Druck

Cabel Organizer V4 / Kabelwickler V4

hey um die label in der schublade zu organisieren ein einfacher Kabelwickler, hab spass beim drucken Hey to organize the label in the drawer a simple cable organizer, have fun printing

Downloads
60
Likes
7
Rating
5
P
Printablesgemini v

Cabel organizer (Cabelnizer-7)

This is tiny cabel organizer for seven conventional cabels. It can be fixed on the furniture or apliances surface with double-sided tape. Dimensions: lentgh 120 mm, mount surface width 16 mm, thickness avg 2 mm. Cable pit width 5 mm. 3D…

Downloads
59
Likes
2
Rating
0

Cabel clip

Cable Clip 3D Print Instructions Material: PETG Layer Height: Recommended 0.2 mm Nozzle Temperature: 230-250°C Bed Temperature: 70-90°C Scaling: Adjust model scale to fit your cable size Cooling: Moderate (50-70%) to avoid layer adhesion…

Downloads
59
Likes
3
Rating
5
P
PrintablesFarin

Cabel Holder

en A simple cable holder for cables up to 6 mm thick. I designed this holder because I wanted to neatly hang my network cables (Cat 6) on the wall in my basement. The holder works for all kinds of cables — I use it for both USB and LAN…

Downloads
59
Likes
6
Rating
0

Cabel holder for Makita battery lawn mower

Replacement cable holder for makita battery lawn mower

Downloads
59
Likes
9
Rating
5
P
PrintablesRaymondKelly

Robot Lawn Mower cabel connector- Rasenmäher Roboter- hacken

Robot Lawn Mower Cable Case - Rasenmäher Roboter- Kabel Für Begrenzungsdraht - boder restriction cabel --> INFO <-- (reason why i made it) --> I hade some problems with a wire splitting. Or some higher resistance with the cable. After the…

Downloads
56
Likes
16
Rating
0
P
PrintablesStářa

Cabel holder with honeycomb design

Cabel holder with honeycomb design recomended layer height: 0.2mm

Downloads
52
Likes
7
Rating
0
P
Printablesgemini v

Cabel organizer x14 (Cabelnizer-14) ver.2

For mounting with double-sided tape

Downloads
51
Likes
5
Rating
0
P
PrintablesFutureLab

Under desk cabel holder / Kabelaufhängung für Untertischmontage

Screw this design under your desk, to organize your cables. Print with supports.

Downloads
51
Likes
6
Rating
0
P
PrintablesMarcin L

Clip Cabel Buddy Inspiration

https://a360.co/3OQZvIE

Downloads
48
Likes
2
Rating
0
P
PrintablesTheSpirit

splitter for headphone cabel

It's just a splitter for 6mm cabels

Downloads
45
Likes
6
Rating
4
P
PrintablesAlesh
Downloads
44
Likes
6
Rating
0
P
PrintablesJohination

Kabelkanal / Cabel Canal 400mm

Einfacher und stabiler Kabelkanal den ich für mein Smarthome entworfen habe…

Downloads
43
Likes
6
Rating
0
P
PrintablesPrnz

Cover for Cabels of a Ceiling Light

Junction box for Cables coming out of the Ceiling for Lamps - with Hole for the free hanging Cable to the lamp

Downloads
43
Likes
9
Rating
0
P
Printablesalways2cold

Cabel Clip with wall mount / Kabelklemme mit Wandhalterung

Das ist eine einfache Kabelhalterung für die Wand, welche kleine wie große Kabel aufnehmen kann, sicher festhält und jederzeit wieder freigibt. Ich hatte keine lust mehr auf komplexe Systeme, welche genau ein Kabel speziellen typs halten…

Downloads
42
Likes
2
Rating
0
P
PrintablesAlexander

Amzone Echo Dot 3 power supply cabel cover

Cable box for the Echo Dot 3 power adapter Supportfree power adapter with this dimensions: 51 x 51 x 35mm (approximate

Downloads
41
Likes
9
Rating
0
P
PrintablesPontus

cabel gland for motorhome 10mm wall

prints with some support, i used paint on support and ironing on the top layers.

Downloads
40
Likes
6
Rating
0
P
PrintablesRGB toaster

HSW cabel holder

cabel holder

Downloads
40
Likes
10
Rating
0
P
PrintablesMauriceR

Bosch eBike Charger cabel holder // Ladekabel Halter eBike

I hang the charger from the ceiling and that the cable does not fall on the ground I made this Adapter. Ladekabehalter für Bosch eBike charger A-series.

Downloads
39
Likes
8
Rating
0
P
PrintablesTony Stark

cabel box/cord holder

Cable box, mounted behind the table to hide dangling wires.

Downloads
39
Likes
7
Rating
0
P
Printablesb1tshifter

Cabela's Telescopic Rod Endcap

I picked up a Cabela's telescoping rod at a garage sale, and it was missing the endcap. This design threads in where that went. I don't know how well it matches the original, because I've never seen it. Rod details: Cabela's Graphite…

Downloads
38
Likes
1
Rating
0
P
Printablesdragoncraft

Y-Cabel Splitter with WAGO

Y-Splitter for electrical Cable holder for WAGO 413

Downloads
37
Likes
15
Rating
0
P
PrintablesFineMrX

Voron Cabel Clip

A cable clip to guide the Canbus cable along the PTFE tube. Only a small cable tie is needed to attach the clip.

Downloads
36
Likes
11
Rating
0
P
PrintablesMarek Čopjak

Cabel holder

My first 3D model created based on the broken template of the original holder.

Downloads
36
Likes
4
Rating
0
P
PrintablesFilip Soukup

Manfrotto plate with cabel slot for tethered shoot

A recommend printing it with PEGT and at least 50% infill. Print it upside down without supports.

Downloads
36
Likes
4
Rating
0
P
PrintablesLavaBear

Cabel Organizer

Keep your workspace tidy and free from clutter with this efficient cable organizer. This 3D printable model is designed to manage your cables neatly, preventing tangling and making it easier to access and use them. Perfect for organizing…

Downloads
36
Likes
6
Rating
0
P
PrintablesDevilscave

PC Power Cabel guides

Heut hab ich mal einen Satz einfache Kabelführungen für den PC erstellt. Diese habe ich für meinen neuen PC benötigt da dort zu wenige bei lagen. Ich fand die Originalen optisch sehr gut und habe sie deswegen nachkonstruiert. Zusätzlich…

Downloads
35
Likes
0
Rating
0
P
PrintablesEivind Birkemo

Cabel clip

cabel/wire clip for management for one og several cabel/wires. Made different 4 Version, two that attach with screws, one blank that can be modified and one that fits @nobodyinperso_243954 Screwiverse Honeycomb storage wall system. Easy…

Downloads
35
Likes
2
Rating
0
P
PrintablesRreeeeCAD

Cabel clip for Manfrotto Magic arm 20mm 6.7mm cable

Cabel clip for Manfrotto Magic arm 20mm 6.7mm cable Optimized to clip a Microphone cabes to a 20mm tube but works well with 19-22mm and up to 7mm cabeles.

Downloads
34
Likes
8
Rating
0
P
PrintablesAinon3Dtisk

Cr6 SE/Max cabel clip original creality velikost

Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Mám tu pro Vas držení cabelu na profil 4040 pro tiskárnu Cr6 Max. Jde o možné řešení, když zničíte puvodni sponky a mate radi original nahrady. Vyrabeno z PET G a je mnohem…

Downloads
34
Likes
1
Rating
0
P
Printablesgubi

RJ45 Cabel hanger

I needed to sort the cables by length and I was tired of winding them in a circle. A cable length label can be inserted on each hanger. Each hanger is designed for 10 RJ45 cables. There are two wallmount, first for one hanger and second…

Downloads
33
Likes
3
Rating
0
P
PrintablesEule

sovol sv07 cabel holder

For the cabel holder you need 4 cable ties.

Downloads
32
Likes
4
Rating
0
P
PrintablesI.Hawel

Jumper Cable Winder / Compact Organizer Arduino / Esp cabels

With cable winder, you will organize and managment your jumper cable very easy in compact space like electronics box or take it outdoor. 😍 It fit up to cabels 300mm long. Print Settings Material: PLA Rafts: No Supports: No Nozzle: 0.4…

Downloads
32
Likes
9
Rating
0
P
PrintablesChrisKoh

Omega Cabel Clip

Build from technical Drawing in Fusion360. Printet in PETG.

Downloads
32
Likes
3
Rating
0
P
PrintablesCDS-Technic

Cable Clip insert for 2 cabels

A remix of the original "Cable Clip insert for car trim" that allows for 2 cabels in the same clips

Downloads
32
Likes
3
Rating
5
P
PrintablesRaymondKelly

Cabel Chain round flex

Cabel Chain round flex Simple Thing Have Fun, don´t hesitate to give a like or post a make picture. Open for any improvement ideas.- just send me a message. Category: Hobby

Downloads
31
Likes
7
Rating
0
P
Printablesambulak

Cabel orginazer

Need multiple to work as intended. Use two sided tape to secure them.

Downloads
29
Likes
2
Rating
0
P
PrintablesEmatyk

Caution! Cabel on the floor! Sign

Summary Fully printed hinge – just slide a short piece of 1.75 mm filament through the holes to pin the two halves. Printing I would recommend 0.2 mm layer hight. For color change swap filament on preset layers.

Downloads
28
Likes
1
Rating
0
P
PrintablesDavid Strmen
Downloads
28
Likes
2
Rating
0
P
PrintablesAinon3Dtisk

Cr6 SE/Max bed cabel clip

Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Mám tu pro Vas držení cabelu od Bedu do desky o prumeru 8mm pro tiskárnu Cr6 Max. Jde o možné řešení, když Vas nebavi original sponky, ktere se musi šroubovat. Sponka je…

Downloads
28
Likes
3
Rating
0
P
PrintablesTeraflop

Cabela's Collapsible Camping Table Endcap

This model plugs the ends of a collapsible camping table. After years of use, several endcaps were missing. The endcaps are friction fit; therefore, a very tight plug was made and printed with TPU to be flexible. They should not fall out…

Downloads
27
Likes
10
Rating
0