49 models
You should use supports under the tip of the tower if you want a perfect print. All models can be printed except the selfedit this model is made of individual parts so you can do anything you want.
This project is part of the Educational Innovation Project IE25.6106 at the Universidad Politécnica de Madrid. It involves the creation of a custom-designed key that was awarded as a prize in an educational escape-room activity. The key,…
A 3d printed scaper's tool is a handy device for aquascaping enthusiasts who want to create and maintain beautiful underwater landscapes in their aquariums. It also works great as a scraper. The design of the scaper's tool is parametric,…
This bed scraper has a new 0.2mm lip on its backside to easily lift flat prints with big adhesion.
Yet another scaper:) Printed in BambuLab PLA, with 50% infill and 4 wall loops
Un support pour le scraper de BambuLab
This is a very simple scraper design with an area to attach to a rope keychain etc. Happy Printing!
This is a scaper tool compatible with the stick connectors.
Please give me feedback about the print-ability and suggestions because it is my first model.
Sadly all ice scrapes you need to print with supports.
Holder for the HexScaper (https://www.printables.com/model/122894-hexscraper-printbed-scraper) for the HSW System
This is a WIP-ish replacement cap for the Decathlon LAKESIDE-1 TRAVEL 600 fishing pole. The cap does not thread all the way (should probably reduce it's height), but it's way sturdier than the original one. This can be considered a…
For a Decathlon Caperlan 6m Travel fishing rod that I use as a mast for a ham radio antenna for SOTA/POTA. One part is to keep the mast upright (use on the lowest element of the fishing rod). The other parts are to hold the antenna wire…
I designed a 3D replacement coin for Caper Europe. Better don’t loose one. You have to print both sides seperately and glue them together. I recommend a 0.2 nozzle and 0.08 layerhight. I extruded the different parts of the coin as a…
You don't need supports maybe under the mailbox. All models can be printed directly except the selfedit this model is made of individual parts so you can do anything you want.
I like the model but needed to alter for my scraper. changed the scraper holder arm style and dimensions of the holder to accommodate my scraper. Made the blade storage opening with more tolerance. I don't have a skadis board so changed…
A slighly modified version of the handy bambulab bed scraper. If you have an AMS or MMU system you can make the logo a different color as seen in my pictures. The scaper has a hole so you can hang it somewhere close to your printer! The…
Bottomcap for the Caperlan Travel 600 still fishing rod. its got a vent hole in the bottom for water and air to escape while deploying or retracting the rod. Feedback is appreciated! Print Settings Printer Brand: Creality Printer: Ender 3…
What do you do if you need a scraper to remove silicon stains but only have some trapezodial blades and a 3D printer? Of course, print one! Very simple and quick to print. Print as orineted in the file. Use two M3x8 screws and nuts to…
Headlamp clamp for bicycle, fitting Decathlon's FORCLAZ, SOLOGNAC and CAPERLAN headlamps with trunions. Please check your headlamp's fixation to the headband before printing. If it fixes with trunions, this design will fit your headlamp.…
This is a simple guying ring for the Decathlon Caperlan Lakeside 100 (7m) fishing pole. It’s designed to slide down from the top and stop at the end of the first (thickest) segment. It’s a great companion for my ground base if you need to…
Voronoi Look, Ok for scraping play dough off of a vinyl floor, not for PETG off a PEI bed
Made these because the orignal tray would allow engouh space for a spool Has is, you will need to make 8 pieces. I was able to fit in one build plate on my Mini. You can use the Fusion File to adjust for the Height/diameters you nedd for…
Convenient inclined fitting to drain the resin from the scraper supplied with the Elegoo Mars 2 Pro Print instructions PLA, layer 0.2mm, infill 100%
Additional parts required: 2 - M5 x 15mm screws (You may only need a single screw to secure it but the model has two holes in case)
I use the Decathlon CAPERLAN Lakeside 100 (7m) as a lightweight mast for my portable antennas. To make the setup easier in the field, I designed this simple ground base. It keeps the bottom of the pole exactly where you want it while…
To fix a Carperlan 4x4 Fishing Net The weakness is the arms mounting head that in not very well design Print Settings Printer: JG Aurora A5 Supports: Yes Resolution: 0.2mm Infill: 20% Notes: After printing, don't forget to insert a diam…
A slighly modified version of the handy bambulab bed scraper. If you have an AMS or MMU system you can make the logo a different color as seen in my pictures. The scaper has a hole so you can hang it somewhere close to your printer! The…
Intro A 'double-bed-scraper-like' door stopper. Print instructions Print with 3 perimeters.
I had the original cap broken very quickly. The rubber pad did not work for me. This replaces the original cap with one single part. I hope it would be more durable than the original one. The print I made is from PLA with a 0,3mm nozzle.…
es marca paginas inspirado en la novela de monty brox caperucita Print Settings Supports: No Infill: 40% Category: Art
This is an eyelet attachment for the tip of the Caperlan LAKESIDE-1 700 fishing pole, for using the pole as a mast/support for amateur radio and other, mainly wire antennas. The attachment is designed to be inserted into the second…
Inspired by this eyelet from Wolf (global form) but smaller to fit my fishing pole. Designed to be inserted directly on the last segment, and to fit the segment after (adjustments could be done to fit this segment better - FreeCAD file…
Breaking Free from complacency and what he knew as home. Our hero takes his first leap into a new life. He is met with considerable resistance. Will he break free? I used hands from tinkercad models available so I am not sure how to give…
this is a scraper to get all of the extra filament of the print bed.
A small organiser for the trimmer and heads that come with it
Step into a world of pure cuteness with our adorable Baby Cat in Hat model! Imagine the joy when this tiny kitten, dressed to impress in its little hat, graces your home or office space. This charming figurine is not just any ordinary…
🎉 Get ready to coo over this irresistibly cute baby cat donning a stylish hat! 🐱 The tiny feline is the epitome of adorableness, with big eyes and soft fur that begs to be petted. This little kitten is all dressed up for an adventure,…
A Gridfinity holder for the Gedore 0179-06 scraper (which just happens to be the best 3D-printer-related scraper.)
This model is a scraper designed with slots for three 6 X 3 mm round magnets. To embed the magnets, you need to add a pause in your slicer at the layer that covers the holes. Additionally, it is highly recommended to use a low layer…
Inspired by this eyelet from Wolf (global form) but smaller to fit my fishing pole. Designed to be inserted directly on the last segment, and to fit the segment after (adjustments could be done to fit this segment better - FreeCAD file…
I use the Decathlon CAPERLAN Lakeside 100 (7m) as a lightweight mast for my portable antennas. To make the setup easier in the field, I designed this simple ground base. It keeps the bottom of the pole exactly where you want it while…
This is a simple guying ring for the Decathlon Caperlan Lakeside 100 (7m) fishing pole. It’s designed to slide down from the top and stop at the end of the first (thickest) segment. It’s a great companion for my ground base if you need to…
I designed a 3D replacement coin for Caper Europe. Better don’t loose one. You have to print both sides seperately and glue them together. I recommend a 0.2 nozzle and 0.08 layerhight. I extruded the different parts of the coin as a…
