209 models
About I have a one socket and a plug that is super hard to remove, so I created a handle to make it easier to remove the plug from the socket. Should be compatible with standard angled plugs used in computer electronics, home appliances…
Print approx. €0.63–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
With layer high 0.25 --> Layer 16.45, stop for insert the Hex nut M5. I had to change all my socket T15 with a CEE socket, but the CEE is bigger than the T15. So i made this adapter. T15 (Screw hole 38x38 M3-M4) CEE (Screw hole 60x60 M5)
Print approx. €1.97–€2.40 excl. taxPreliminary estimate for PETGSource material: PET
The armrest latch of the Kia Ceed is prone to breaking. This is a known problem. I designed and printed this replacement part for a friend. I put i here so it might be usefull for other people as well. Designed with Freecad. Printed with…
A Stand for Cees awesome Cryptex. Fits all lenghts.
Der Deckel war vorher mit Stift und Niete befestigt, der Druck ist für eine Einschmelzhülse M3 ausgelegt, und wird mit einer Schraube M3 x 20 befestigt. Ich habe den Deckel mit PETG gedruckt.
Ich habe einen Halter für den CEE Stecker meiner Brennenstul Kabeltrommel gesucht und den von Thingiverse “crix26” für sehr gut befunden. Leider habe ich einen anderen Stecker an die Kabeltrommel verbaut und somit passt der Halter nicht…
Die Halterung des Winkelsteckers nervt einfach. Ich habe dann das Modell von https://www.printables.com/@edmanderl_108910 gefunden und für mich nachgebaut. Das Kabel muss man links herum aufwickeln, dann passt es mit der Halterung ganz…
This is just a toy, do not use in a car )
This is a cover/protection for a blue 16A/230V 1 phase wall outlet (feeder). A 1/4 turn locks the cap. Fastening eyelet for a cord present, so that you do not lose the cap.
The Kia Ceed (CD) Series has a deep storage container. I like the design from papabravo so i make a new one for the ceed series. There are some variants for every use case. For the variants with a handle use more infill (in this area) for…
I lost one of the plastic roof rack clips from my Kia Ceed, so I made designed and printed one myself! It doesn't look exactly the same but it's close enough for the untrained eye. Did the job perfectly. Print instructions Category:…
Hello! I had a problem with a broken latch on my car, so I made one myself in Fusion360. It's slightly modified so it's not as big as the original.
Schuko Socket Plug protector (if no grip use M4 screw to remove)
The Kia Ceed (CD) Series has a deep storage container. Printed with PETG in order to handle the temperature inside car in summer. Works good enough with 2 perimeters and 15% infill, but to make it strong enough and light at the same time…
OpenSourceEV Parts designs, produces, and retails 3D printed parts for Rivian EVs. We're Open Source because we post the STL files for every single product that we design so everyone can remix or 3D print them at home for little to no…
Sycee or YuanBao was a type of ingot dating back to the Qin dynasty of ancient China. Today gold stylized sycee decorations are often used in Chinese New Year festivities. I now have 2 versions of this: 福 - Fortune 招財進寶 - In the form of a…
Print without support;
OpenSourceEV Parts designs, produces, and retails 3D printed parts for Rivian EVs. We're Open Source because we post the STL files for every single product that we design so everyone can remix or 3D print them at home for little to no…
OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no…
OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no…
Dipped beam headlight cover for kia ceed. required original rubber grommet. made for mounting HID headlight There is also a version without the hole
OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no…
Kia CEED/XCEED bj 2018 Mittelkonsolen Halter.
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Bugsnax inspired, Cuppacceetle, Tabletop DnD miniature 2 poses running and sleeping 25 mm medium base which can be…
Simple insert for a Kia Cee'd cup holder, to allow a 250ml red bull can to sit nice and safe. I initially printed this in PLA, but it warped with the heat in my car so I reprinted it in PETG and no problems since.
This is the 1" version that works RAM branded mounts. If you have a different branded mount, please default to the 17MM version instead. Print in PETG or ABS with supports turned on. This product is available for purchase here:…
to protect a 16A CEE-conector from dust. usefull in DIY shops with dusty workings. printed with TPU Filament shore 40D and 0,4mm Nozzle.
OpenSourceEV Parts designs, produces, and retails 3D printed parts for Rivian EVs. We're Open Source because we post the STL files for every single product that we design so everyone can remix or 3D print them at home for little to no…
Just a quick remix to replace the English letters with their equivalent Aurabesh ones. Aurabesh is the font used for many of the Star Wars universe items. Print instructions Just follow the instructions for Cees excellent original.
Windshield Wiper Cap for Kia Ceed
Kia proceed GT MY 2022 (also compatibel with Ceed or Xceed or older Proceed gens) phone holder (Handyhalter) for Xiaomi Mi car wireless charger 20W https://www.mi.com/de/mi-20w-wireless-car-charger/ Printed in 0.16mm layer, could also go…
Functional centre console/armrest storage compartment latch to replace broken one from a Kia Ceed 2016. Model by Rankoh. Reupload from Thingverse.
I was asked if I could post the blanked ring I used as a basis for my Aurabesh and Sith rings for Cees excellent cryptex model. https://www.printables.com/model/28937-cryptex-5-6-7-8-or-10-letter-wheels I've also added the .blend file for…
OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no…
Getränkehalter Einsatz für Kia Ceed, damit die Dosen besser halten und nicht mehr umkippen können. Cup holder insert for Kia Ceed, so that the cans hold better and can no longer tip over.
Since I had a bit of water come into the 230V CEE plug I added to my VW T4 camper I designed a cover for it to keep it dry when not in use. It is designed to be printed from TPU so it can seal properly and keep moisture/water out. These…
This adapter enables you to use semi-integrated Specialized SL7 spacers and stems on the Seka Exceed. The adapter in the picture was printed on a HP Multijet Fusion (PA12; via JLCPCB).
Thanks to user feedbacks, and update is on its way It can already be tested. Files are in the beta folder. Here are the changes: much better software, it is now a FreeCAD project since it is a software my values align with (open source,…
WARNING - YOU ARE ABOUT TO EXCEED THE LIMITS OF MY MEDICATION, sign Category: Signs & Logos
It's very difficult to find a good phone holder for my car, which is a KIA Ceed GT. The standard phone shelf is not comfortable at all. In my previous car, I always had the phone in front of my eyes. Here it's hard to mount the phone to…
OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no…
Protective Cover to protect a 16A 380V CEE male connector from getting dirty if not in use. Prints in upright position without an supports Using PETG or ASA is recommended, but PLA should be ok if not used in a harsch environment.
This is the cap of the head lights of KIA ceed 2008. You still need the rubber seal.
Extend frame for mobile holder for Kia XCeed (facelift from 2023). The air grille in the Kia XCeed is very low and the steering wheel covers the mobile phone display. I made special frame and placed it a little higher. No screw needed.…
Ich habe diesen Halter entworfen für die ordentliche Aufbewahrung der CEE Adapter. Den Halter habe ich mit Poppnieten an der hinteren Tür eines Kastenwagens angebracht. Drucken ohne Support, einfach loslegen. Vielleicht kann jemand sowas…
bottom part REMIXed for Canyon Exceed CF6
0,2 or 0,28 (0,3) layer height 20% infill No supports PLA printed on ender 3v2
The source marked this model as adult content.
This is my custom remix of Google Home Mini inner mount. It has diameter matching the outer mount. In my opinion it look better that way. You can print it with outside circle (bigger one) laying down on textured PEI for non-visible first…
I've designed a Trunk curtain retainer for KIA CEED SW (2006-2013) The original numbers are: for left 859371H600, for right 859381H600 This 3D Model was printed with ASA and ABS filaments. This is my third design in Printables, so please…
This is a simple remix to make an actual plugin adapter for Europlug, so that it's more sturdy and harder to remove when plugging in to a Schuko CEE 7-3 (EU) connector. It's easy to print and no supports are needed. It is designed to work…
a 7" Rpi sceen mount for Voron2.4 with doors Joint holes are 1cm offset from original to fit doors when tilted vertical
Electrical junction box Input: 1x CEE 400V 16A (14mm cable) Ouput: 3x CEE 400V 16A (14 or 12mm cable) 3x Schuko 230V 16A (10mm cable) For Assembly: 16x 4x30mm long wood screws 7x WAGO 221-415 (5 slot wire clamps) Print instructions print…
OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no…
thicker side panel spacer, also change the length of the hinges for the side panel. And the reel mounting assembly and reel roller. the hinge parts for the side panel are the same as original. The reel mounting support is printed to…
Roof plugs for kia ceed sw or vehicles with simmilar racks. Should be priinted upside-down. May be improved with slight curve to the top. Print Settings Printer: Prusa Mini+ Rafts: No Supports: Yes Resolution: Variable Filament: Creozone…
Stojan na omáčky Sau'cee - láhev vzhůru nohama / Sau'cee sauce stand - upside down bottle Stojan s textem se tiskne bez podpěr. Stojan trojnožka se tiskne s podpěrami. Vše jsem tiskl na Prusa i3 MK3S výška vrstvy 0,3 mm, 2 perimetry a 5 %…
Printed with TPU to replace the rotten original.
This accessory placed on the trailer drawbar allows you to store the trailer's electrical connection plug away from dust and rain. Printed in nylon, it has been in place for over a year, a polyamide collar has been placed to make the…
OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no…
This is case for the Raspberry Pi OSOYOO 5 Inch DSI Touch Sceen. https://www.amazon.com/gp/product/B07KKB5YS9/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I've included multiple CAD format versions of the model so that others can change the dimensions as they see fit to accommodate build-to-build variations in their printers as well as their vehicles. Printing instructions : Recommend…
OpenSourceEV Parts designs, produces, and retails 3D printed parts for Rivian EVs. We're Open Source because we post the STL files for every single product that we design so everyone can remix or 3D print them at home for little to no…
Printed with PETG at 0.2mm layer height, no supports
I couldn't find a nice looking Rawe Ceek stand so I created one. Posting a make and liking the model is much appreciated!
este es mi segundo remix de mi modelo original en el que agrego un buzzer de 13 mm por 3 mm, usando las mismas laminillas para la pantalla y el sensor, asi como tambien he hecho mas gruesas varias paredes y pequeñas mejoras esteticas…
TL;DR This OpenSCAD model generates 3D printable dust and dirt protection covers for CEE7/Schuko power outlets. Available in four shapes—round, square, hexagon, and octagon—the design is fully customizable for FDM 3D printing. Perfect for…
OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no…
Includes: - HDZero Lux camera mount - TrueRC Core antenna mount - Capacitor+XT30 holder - Arm protectors (boots) Photos will be added later.
After the Spirit FF, I had the chance to get my hands on the Nichimo Midships thanks to my Australian friend Jason alias Bormac. I modeled the car, and you will find the stl of the plastic parts for this car in this publication. I also…
Prevent unauthorised use of electrical appliances with this easy-to-use EU Plug Lockout Clamp – designed specifically for Type F Schuko (CEE 7/3) plugs . Whether you're a professional in the electrical industry, managing shared spaces, or…
Its simply a remix of Ender 3 S1 LCD Cover by Tree Nippled Goldfish just without raspberry pi logo.
This is an wallmount for a CEE 32A coupling. Preferrable printed in PET-G You need following parts: 4x threaded inserts (like the inserts sold by Cnc Kitchen) 4x M3x16 counter sunk screw 2x ø6 Wall mounting screws optional: 2x matching…
EN: Since the manufacturer does not supply an ashtray or other compartment suitable for small waste (especially parking tickets) in new cars, I made my own. The bin can be placed in the left/right front door in the place designated for…
OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no…
Mounting mandrel for centering the clutch plate Kia Ceed JD 1.6 GDi
Mount for CEE EU power split / distribution box / schuko verteiler a simple way to screw and fix the typical 3/4/6 way CEE power splitters
Wheel bolt cover 21mm for KIA CEED (in my case GT version), PROCEED and others. I suggest printing one model to check the fit, there are 2 versions to choose from - normal and tight. Print with ABS or ASA - prefered.
I made a simple bolt to attach interior upholstery to bodywork of Kia Ceed. The original bolt breaks when pulled out during repair your car. My bolt is a reimbursement of original. Filament: PETG, better ABS or ASA Supports: NO It is very…
WARNING - YOU ARE ABOUT TO EXCEED THE LIMITS OF MY MEDICATION, sign Category: Signs & Logos
I needed to fix an Aqara “Wireless Mini Switch” to the wall next to the existing light switch. As we do not need the outlet below the switch and this also was just a temporary solution, I decided to quickly make a mounting clip that would…
PLA or PETG, 3 Walls, 33% fill, no supports Material: 1x 16A, 400V Stecker ( REV 0510602555 CEE Wandstecker 16 A 5polig 400 V 1 St. kaufen ) 5x 4mm Sicherheitsbuchsen ( Electro PJP 3286-CD1-N Sicherheits-Einpressbuchse Schwarz 1 St.…
I made a stand for Cees's excellent cryptex. I made it for 5 letters. It was pointed out what about the other sizes. So here they are. Same print details (and pictures) as the 5 letter version. .6 nozzle .3 resolution
As the original Part was broken, i made an upgrade. the Orginal Snow-Foam-Lance is linked below: https://www.amazon.de/gp/product/B09KGGTTWG/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 printed with the mk4 with prusament petg jet…
Yeah, we mistreated them in the name of Windox, but we did explode the planet.
English (version française en-dessous) This wall outlet cover is designed for European type E (Belgian/French, CEE 7/5) outlets . Two clips on the side keep it tightly in place. Two versions available: Classic version Thinner cover…
Arcee is a female Autobot from the Transformers Universe. Print with supports on build plate. Print in Place. Wheels do roll but pressure maybe needed to get them free initially. Also make sure to clear all supports, there are some in the…
This is a remix/combo + cleanup of exellent MOD by SpartanDog3D and JASII adapter for CopperHead hotend. It uses 4mm OD and 3MM ID PTFE tube to feed filament from MMU to the extruder and it solved most of my issues (still better tune the…
Print settings: Project file provided as reference for the settings I have used. You can toggle object visibility and arrange on plate to print the project bit by bit. Designed for printing with 0.6mm nozzle to speed up the process, but…
31K pistol I made after seeing the pistol on the side of the arcade case. Buy M or L hardware. Printed magazines are in the files or compatible with modified nightingale magazines or unmodified AIT 40 max lightingale magazines. Hardware…
