Cello RockStop Kit : Sci Fi Themed
Cello RockStop Kit : Sci Fi Themed
- Downloads
- 54
- Likes
- 27
- Rating
- 0
84 models
Cello RockStop Kit : Sci Fi Themed
Enhance your Secret Hitler board game with this 37mm Chancellor coin. It's a nice tactile addition that replaces the usual wooden plaque or the printed paper placard, adding a bit of DIY style to the game. The design is inspired by a…
I created this to adapt my Moen Monticello faucet assembly for use with the newer Moen 1225 replacement cartridge after the original cartridge model was no longer in production. The recommended handle interface part#109113 included in the…
SUPPORTO PER TELECOMANDO APRI CANCELLO WHY EVO PER PLACIA PORSCHE CAYENNE 3 SERIE
A bow holder to hang your bow on your music stand. The version you can download here does not have the shown name embossed. Its blank. I updated a design by Yisroel Forta I saw on thingyverse. (Link below) How to print it? Can be printed…
Found a low detailed model called chancellor star destroyer so I did some digging and found this one consistent side view, so I decided to try to remake it. Ended up using a valiant as the base and built it up with pieces of veragitor and…
I modeled this cello out in Shapr 3D. I've included STL files for the cello, cello with bow, and the cello ring holder separately. If you'd like to adjust things separately you can use the 3MF file to remove more specific parts if you'd…
I took the original cello model, found a bridge model somewhere, found a better-looking scroll head, added pegs, pegbox, and endpin. Print Settings Printer: anycubic vyper Rafts: Doesn't Matter Supports: Yes Notes: Supports only needed…
BMW GS Swingarm Covers - Coperchio forcellone monobraccio Type A Type B Resize to adjust dimensions All our designs are free to download and use. Your support fuels our creativity. If you downloaded and enjoyed this file, please leave a…
Print the cello and double bass adapter with TPU with 100% infill. I used Filaflex 82A For the pencil mic adapters both PLA and PETG work. No supports, only the 170 version doesn't print very nice but is still okay. For the cello, my…
id : be10011a7 name : cello lamp size : 85X73X260 mm files : 4 pieces : 7 maximum size of the component : 85X46X150 mm total print time : 10h:25m raft : yes support : no Applicable Bulb type : tBulb B Instructions : lampshade infill 100%…
Fits the Pirastro round rosin Screw-on lid to keep clean 3 deigns of the lid Hollow bottom so the brand and type of rosin can be seen Easy print
Low Poly Cellist Cello Player- Sculpture Very nice piece of art in low poly style. Place it to your living space or in your office as eye catcher. You need to print it with supports ;-) Take a look to my models, there you can find similar…
General Note: The files presented in this project have been printed, however, some have been updated slightly to provide more room for certain components and/or to reduce movement of certain components. Printing: 3D print with the…
Simple wall mount for 4/4 cello. With bowholder.
I really wanted a scroll for the O'Cello so I found this wonderful violin print designed by bchan based on a Stradivarius and scaled it up to use as a base model to design and build the scroll.…
I found myself in need of a second mute. I thought about buying one but I have a 3D printer. Why not make one. Print with 100% infill. *PRINT IN TPU* 95A works just fine but go find out if anything softer works. PLA,PETG,ABS will damage…
Printed on a Creality 3 V3 SE Made in Onshape Print the model laying flat Settings used: - infill density 20% - no supports - adhesion (personal preference)
Source: violin model heavily remixed from https://www.printables.com/model/447457-violin Case is a remix but I've lost the location of the original. Hinge reworked from Parametric Hinge by rohingosling…
A cornicello is an Italian amulet or talisman worn to protect against the evil eye and bad luck in general, and, historically, to promote fertility and virility. In Neapolitan, it is called curniciello or variants thereof. The amulet is…
Hawse Fairlead with adjustable fixing slot - Passacavo per verricello Overall dimensions: 300x67.5x18mm Centre to centre 254mm / 10" Standard Bolt Mount Pattern with adjustable fixing slot Mounting hardware needed M10 / 3/8" bolt…
I modded and added some parts for the O'cello after making my own. This is a very cool print to make and not too hard to build with a little attention to detail. update: I made a scroll for the top too.…
Classic-style 3D chess pieces including the chancellor and archbishop, designed for popular non-standard chess variants such as Gothic, Capablanca, Gliński–Capablanca, and McCooey–Capablanca. The knight requires minimal support under the…
Hello everybody! This is a 3-D printable endpin made for cellos. In the print profile, I have different plates for sizes of the pin/spike diameter ranging from .3cm to .85cm. It was made to be printed in TPU to be able to easily fit even…
orient as shown in the picture mine: Petg, 3 perimeters, 40% fill also changed the brass theaded inserts and used long screws to really secure the wings
Have used the Guitar Wall Hanger by @JustinSpanier for a few guitars and liked the durability and esthetic of this design. After looking for something similar for a 4/4 cello, the closest wall hanger didn't match the look, so I modified…
The provided knee supports for the HBCE 990 cello don't make it feel like a real cello. I was unable to keep a good posture while making this cello rest on my knees, maybe due to my legs which are smaller than average. This replacement,…
This is made wit OpenSCAD. Files are included
This is a more refined version of my cello string holder piece. This will work with normal sized strings on a 4/4 cello. Printed it in PetG, and 100 percent infill. Orientation: Lay it down to its back and use support as needed. Use at…
So, I got this bootlag electric cello from China by my grandma a while back. I was not ergonomically usable and I have no idea who designed or made it because as a Cellist I can't imagine how this cello was suppose to work. Maybe I was…
Model of a double bass or cello placed on a birthday themed stage, complete with a card holder for background
Very basic clamps for clamping the body of a cello. Holes for bottom half designed with 3/8" threads. Holes top half have no threads for the threaded rod to move freely through the holes. The handle is a remix of a GoPro long knob…
VERY COOL F.C. BARCELLONA wall badge Category: Art Tools
This is o'cello with 1/2" center rod ( 13mm-ish hole ). First thanks cokane for the excellent model, I own a electric one but it is rather bulky, and I try to make a compact one in this build. I used these items: tube (…
This is a model of a "square-box" cello stand you can buy anywhere for your real cello. This one is sized to fit my model cello, https://www.thingiverse.com/thing:5264383 Print Settings Printer: Anycubic Vyper Rafts: Doesn't Matter…
Same warnings as on the original model: use a soft, flexi fiber or risk harming your bridge. I used “Flexi-PLA” , with 50% infil, and that worked fine. Note: image is copied from the source object page
Ever lost your tape roll holder? Print this to replace it! Pin length: 25mm Pin Diameter: 6mm Taperoll inner diameter: 26mm
sorry about the low image quality, by the time I'm posting this, I had already given away the print.
I REMIXED MY OWN REMIX AND CREATED A WALL PANEL Three options for wall panels. Printing PETG using standard printer settings without support.
Stopper for the cello (violoncello) pin . Prevents the instrument from sliding on the floor. The first variant is simple and functional. The second variant with holes for gluing rubber feets.
Just some faces with circle designs for 4cello's Aqara Cube. Thanks for the great work @4cello I printed them face down, but I think face up on supports might be nicer.
Update: Created an alternative spacer, ‘lift’, and cover to put the bucker pickup as close to the strings as possible. It requires an additional two M3 screws and two M3 washers. It's still compatible with the same ‘bucker holder’. I…
Oggetto utile per bloccare le ante di un cancello
Remix of "Rev 3" -- see attributions. Print Settings Printer Brand: Anycubic Printer: Vyper **Rafts:** No Supports: Yes **Resolution:** 0.12 mm Infill: 50% **Filament:** any Soft, Flexible ONLY! anyHow I Designed This ===================…
The cello body was carefully drawn based on an accurate image of a cello, ensuring the precision of its proportions and the flawless presentation of details. During the design process, I referred to the actual dimensions and structure of…
Print with TPU for the best results! https://www.youtube.com/@vivacello YT for a quick demo of it in the shorts :)
An attempt to make a quadrophonic pickup system for the O'Cello. This, coupled with copper tape on the 'frets' of the o'cello that make contact with the strings as they're pressed down and send an electric single down a resistor ladder,…
This is a Bow hanger for a Cello stand. The inner dimensions are 20x20mm
I couldn't find any models for this, so I made one
Glory to You, and Your House! Command the respect of the Klingon Empire right from your display shelf with this 3D printed Gowron bust. As one of Star Trek's most memorable Klingon Chancellors, Gowron's fierce presence is undeniable. This…
Using a Sonuus G2M v3, Adafruit MAX9814, 9v Battery, and a small 5v circuit, I was able to use the O'Cello as a semi-reliable MIDI instrument. This was all a part of a long journey to get the O'Cello to play chiptunes. (I'm currently not…
Model of the catalytic domain from the Trichoderma reesei cellulase highlighting the long groove that is form-fitted to bind to the cellulose chain. Protein was rendered as surface, then sliced in half to expose the binding groove.…
Hi there! this is a cello string holder for longer strings, made for fun. And definitely as experiment. I printed it in wood filament, but recomments something stiff. Print orientation is laying on its back. Use 100 percent infill.
The chancellor is a fairy chess piece that can move like rook and like knight.
in TPU gedruckt, hält perfekt am Cello Stachel
We bought a second hand Yamaha SVC 210 but the original Bridge Protector that comes with the Yamaha case was missing. I recreated one that anyone with a 3D printer with a volume of W250xD200xH200 can print it. You will need 5 hex screws…
Pull a rope through the holes on both parts and tie it, so nothing slips out. The circle part goes under a leg of a chair.
I designed this in commemoration of the Dodgers winning the world series and would like to give it to my cello instructor, who is a Dodger fan. I used theReubenator's cello design and simplified the mesh a little, then inserted a few…
Base diameter - 100mm Barrel diameter - 20mm Height - 150mm
The Rook-Knight Hybrid: Introducing Chancellor Marshall Knook XL2, a model of the behemoth dual toolhead Prusa 3d printer with an added top decorative attachment plus a knight-rook-hybrid Marvin resting on the print bed. I remixed my…
Imprimir en esta posición para evitar los soportes. Medidas 60x26 cm. Se adhiere con cinta o pegante a la superficie. El g.code es para impresión en máquina Ender -3 V2 NEO
e un modello 3d solo ad uso estetico
Alternative part 5 for O'Cello to house preamp (see picture)
Cello's 12V Traveller webOS TVs are everywhere in caravans and motorhomes, but the remote gets no home — it lives on the sofa, the floor, or under the sofa. Searched all the usual sites: holders exist for the old Vesten-style caravan…
A festive Christmas version of my chibi gothic cellist, wearing a fluffy Santa hat while playing her cello. The mix of spooky-cute and holiday cheer makes this a perfect seasonal display piece for desks, shelves, and Christmas scenes.
A printable kneebar for the O'Cello with space for preamp'ed part 5
Base diameter - 100mm Barrel diameter - 20mm Height - 150mm
Pallina di Natale del circuito di Barcellona, Spagna
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. Wednesday Cello Lesson Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.4x200mm in size You may print at…
Semplice cartello per cancello carrabile Per avere le scritte nere dopo aver fatto lo slicing basta usare la funzione di cambio colore dopo 5mm.
🦋 What is a Fairy Chess Piece? A fairy chess piece is any game piece not used in standard chess. These unorthodox pieces appear in alternative chess games and special chess puzzles. They move, capture, or promote in ways different from…
Protect those bow hairs from your fingers! https://www.youtube.com/shorts/nmL3QTTePuk
Wall mount for my electric cello. mount to studs or with drywall anchors when studs can't be located. Printed mine in PETG
Hawse Fairlead with adjustable fixing slot 254mm/10" Passacavo per verricello Overall dimensions: 300x67.5x18mm Centre to centre 254mm / 10" Standard Bolt Mount Pattern with adjustable fixing slot Mounting hardware needed M10 / 3/8" bolt…
in TPU gedruckt, hält perfekt am Cello Stachel
Protect those bow hairs from your fingers! https://www.youtube.com/shorts/nmL3QTTePuk
Print with TPU for the best results! https://www.youtube.com/@vivacello YT for a quick demo of it in the shorts :)
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. Wednesday Cello Lesson Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.4x200mm in size You may print at…
Found a low detailed model called chancellor star destroyer so I did some digging and found this one consistent side view, so I decided to try to remake it. Ended up using a valiant as the base and built it up with pieces of veragitor and…