Toy cubes cube for Kids Childrens easy printable hracka deti kostky
Bowling for kids:
- Downloads
- 411
- Likes
- 104
- Rating
- 5
Counting matching models…
Bowling for kids:
Hole in the end to allow for air to escape. Print as it stands, it is designed not to need supports on the inside Print in TPE
TOY A: Size base 170x45x50mm. Size elements cca 30x30x35mm. Tested PLA 0,2mm, 2 wall llops, 15% infill. TOY B: Size base 107x67x10mm. Height elements 14mm. Tested PLA 0,2mm, 2 wall llops, 15% infill. Bowling for kids:
A set of Funny Face water Buckets that flow water out of their mouths. Comes with water wheel and a water jug. You can also get your children to paint them any colour :). Use water resistant paints that are non toxic. Holes on toys for…
i liked the design of the original model but needed something that would take the 1 inch 500 piece roll of childrens sticker. I resized it to accommodate these. i also designed a simple sleeve as the roll was tightening as stickers were…
I was inspired by the song “My Lighthouse” by the band Rend Collective and wanted to work on my 3d modeling skills. So I designed a lighthouse and then added a base that would make it function as a nightlight for a more creative light…
This ring is very quick to print, and sized for a childs fingers.
Small children do not need these 750ml Bottles. That's too much weigh on a light bike. So I designed a small holder for 6cm Bottles holding 250ml. Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: Yes Supports: Yes Resolution:…
I designed a quick shelf and optional card holder for my daughter to listen to her Yoto player on the top bunk. The card holder sits in a slot on the back of the shelf for spare card. Printed with minimal infill, perimeters, and solid…
Filament need Together 40m, Together2 22m, Base 25m Base2 22m. Size (width) Base 150, A,D 120, B,E 155, C,F 190mm. Rings height A, B, C, Together 15mm. D, E, F Together2 7mm. Next toy:
Cute Bay Bat Character Money Box - Print All parts standing up including eyes for best results on FDM Printer - 0.2 layer height - USE TREE SUPPORTS (The internal Chamber may need tree supports. These can be removed with a long-nosed…
Strap for a size 8 (toddler) croc. Printed out of TPU on a Elagoo Neptune 3 Plus
A set of tongs for a childrens food play set that was used to replace the original that broke during use. They are 20 mm wide and 3 mm thick, printed in black PETG. Unfortunately, the 3mm thick PETG tongs were a bit too stiff and the five…
Diameter pot cca 120mm. If you need for holes for handles use file, when going completation hard use watter. If you need for handles use glue for hard plastic (UHU, Tamiya...). For C2 use more wall loops (5). Filament need for B cca 55m,…
These are a few stands for lenses, mirrors, LEDs and cards to help children play around with optical properties by freely moving them around seeing what they can do. Great for also calculating focal length of your 25 and 27mm lenses.…
In order to provide a “Design Stool” for the 2 years old nephew
A childrens shovel for sand pits / beach. My child went to a local park where somebody had a sea horse shovel. He immediately wanted it and got very upset when he had to give it back to the child's owner, so I made him his own. Printing…
Pull the metal stud out of the wheels and press into the feet. Printed with: 0.15mm layer hight, 6 top and 5 bottom layers, 30% infill and 3 parameters.
Best to p rint in PETG, PCTG or similar. No supports required.
We had a drawing tablet at home, similar to this one: https://a.co/d/2h8asbw Ours doesn't have a brand name marked on it, so I'm not sure who actually manufactures it. I knew we were gonna lose the stylus someday, so I took down the…
A Printable task list for children to complete tasks and be rewarded based on tasks completed. Customisable task slots for you to update. Screw in stars to keep track of completed tasks. First attempt at a model so not perfect but works a…
I made these for my children so that we can pick out their clothes each week and they can pick them out each morning before school. You can color coordinate or just use the M-F. Blue Monday and black Friday just seems to fit. just print,…
Replacement wheel for the helmet circumference settings (original has broken plastic parts for rotating gears) Fits for Decathlon childs helmet , maybe for other products. For changes is f3d file (for Autodesk Fusion 360) included.…
This plug fits into the little nylon pockets that hold the ends of the tent poles in many children's play tents. The poles tend to poke through the pockets almost immediately, causing the tent to become unstable. I found the easiest way…
This is a remix of https://www.thingiverse.com/thing:5819434 Printables UI wont let me fill out the fields correctly!!! All I did was make the flange parts stronger as my son was going ham on these. Print two of these and attach to block…
You can use these to put over smaller buttons to make them more appealing to younger children. Use 100% infill on the cross button pusher. 10% - 20% infill for the main button.
I made a nice Childrens Blocks Set Children can learn, how to stack the blocks If the blocks on the sides are not straight, scale the base plate a bit in the X and Y But print the blocks first, and then measure the set first I used silk…
Size cca lenght x width x deep 270 x 65 x 30mm. When going completation too hard use watter, You can use glue for hard plastic (UHU, Tamiya...), when You need. Filament need cca 16m. For B use 0,2mmm layer height (include first layer), or…
UK £ Play money for children great to play with or for a learning tool. I have tried to get them as close to original size and shape as possible.
you'll have to color the wheels in the slicer. you can use any key cap of course. should not need supports.
Dinosaur Childrens toys, super simple and easy to print.
I am making my own custom-designed stackable blocks available here for free. They are inspired by well-known interlocking block systems but are intentionally designed not to be compatible with products from other manufacturers. The blocks…
you'll have to color the wheels in the slicer. you can use any key cap of course. should not need supports.