173 models
Full Collection: https://www.printables.com/@TripleGWorkshop/collections/673389 ------------------------------------------------------ Color order: White, Red, Green Quick Guide to changing filament~ Have some paper to push away extruded…
Print approx. €3.35–€4.09 excl. taxPreliminary estimate for one variant
Replica connector block for the ZX Microdrive. The block is 10.4mm longer than the original as it uses off the shelf parts which need to be cut to size and specific pins removed. I've included a printable pin which slots into the removed…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Replica fixing bracket as normally found screwed to the bottom of the Microdrive. These often got lost. There are two versions, one replicates the original exactly, the other is 10.4mm wider to accommodate my custom connector block which…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
1980's Sinclair Spectrum Games Character Checkers Set Characters from games on the Sinclair Spectrum back in the 1980's as a Draughts / Checkers Set. Each Draught is 30mm Diameter and 5mm high. An optional storage Box is included. 1 :…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
Alicia's mask (latest version is Rev4), I revised it a bit to bring the cheeks in and modified the lips a little. Since then, extra details have been added (Big thanks to Zlatri for sending me a nice reference shot of the masks side) . It…
Modeled this in a couple hours for my own Chris Redfield cosplay (Resident Evil 1) figured i might as well share it for everyone to use the knife is split into 4 parts to make printing, sanding and painting easier
Sympa à imprimer et sans supports ;) Réalisé en PLA pour une déco intérieure c'est nickel ;)
Full Collection: https://www.printables.com/@TripleGWorkshop/collections/673389 ------------------------------------------------------ Color order Start w/White, Green, Red, Black last. Quick Guide to changing filament~ Have some paper to…
An accurate as possible ZX80 housing. Original made by 'alvaroalea' ( https://www.thingiverse.com/thing:1880449 ). Modified to be printable on a standard 3D printer. Updated January 2022: All walls now have a minimum thickness of 1.5 mm.…
Daddy Earl Sinclair from TV series Dinosaurs 8cm Thank you for downloads, likes… Enjoy !
Copy of my retro Display Stands listing as for some weird reason that one isn't showing up. Covers: ZX81 ZX Spectrum 16/48k Rubber Key ZX Spectrum + 48/128k toastrack ZX Spectrum +2/+2AB ZX Spectrum +3 with and without Gotek (extra 5mm on…
Clea's Hair needs to be sculpted from air dry clay, foam clay, or thermoplastic beads. I do not have the artistic skills to do this in Fusion360. “Clea and Francois are best friends, she would never leave him.” - Esquie The better rock!
After the Fracture split Lumière from the rest of the world, an enormous monolith with the glowing number "100" on it appeared on the northern end of the Continent. The year this event took place is retroactively known as "Monolith Year…
The ZX81 was my first computer, many hours were spent playing games like 3d Monster Maze and others, and typing in games from magazines then losing it all due to ram pack wobble, but it still holds a place in my heart that I just can't…
Clair Obscure Expedition 33 Monolith Music Box Replica from the monolith set. Finally perfected the print profile for the .2 nozzle print. The other 3mfs worked but were more sensitive and prone to failure. Fall off the bone supports.…
Voici un petit fichier pour y accueillir un ruban led pour éclairé la surface de travail de l'imprimante . Il y a de chaque coté un trou pour passé le câble d'alimentation du ruban led . Il y a possibilité de mettre un interrupteur sur…
If you own a Retroleum SmartCard V2 or V3.1 from Phil ( http://blog.retroleum.co.uk/smart-card-for-zx-spectrum/ ) you may look for a nice case. There is one case available from Johan at https://github.com/SM7I/SmartCardv2 , but it doesn't…
Fran Sinclair - mother from TV serie Dinosaurs 8cm Thank you for downloads, likes… Enjoy !
A fabric paint stamp and crest badge for those looking to upgrade their cosplays! Sciel and Gustave have this printed on their jackets. Verso's is a physical badge and has space for a flat-back pin to be glued.
as a request I modeled Monocos mask From Expedition 33 with the intent for using it as a wall decor but if needed it could be used for cosplay as well. as it stands the model is 775mm tall but the whole model can be scaled down to around…
Gustave figure from Clair Obscur: Expedition 33, with highly detailed mechanical arm, backpack, lumina converter, and distinctive insignias with a strong focus on accuracy. The model is split into multiple parts to ensure clean printing…
Funko POP TV: Stranger Things 5 - Lucas Sinclair Powered by MakerWorld-Image-to-3D (https://makerworld.com/makerlab/imag
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
"Not the Mama!" "Gotta love me!" It's everyone's favorite spoiled, pan-wielding infant, Baby Sinclair. This figurine perfectly captures the lovable, demanding, and hilarious youngest member of the Sinclair family. This model is a…
lampe du prénom Hugo des trou sont fait pour passer des led agréable Imprimer avec support et jupe (contre le warping)
Case for my ZX PicoMD SInclair ZX Spectrum Microdrive Hardware Emulator Details - https://github.com/TomDDG/ZXPicoMD/ Note there are two versions of the top: ZXPicoMD_top.stl is for an OLED size of 27.5mm x 27.5mm. ZXPicoMD_top_26x26.stl…
A prop of Gustave's mechanical arm. It is assembled with superglue and has lines and grooves that facilitate easy painting, I consider myself a very bad prop painter, but with some clear coat, acrylic markers and some patina grease ( you…
Baby Sinclair from the classic Dinosaur Family.
As with my other 6 mm scale miniatures I am trying to challenge what is possible with regular FDM printer (Prusa MK4 in my case). This over-weaponized mech is my original creation inspired by grimdark fishfolks and that mech wargame…
Capture the resilience and determination of Claire Redfield with this stunning figurine from Resident Evil 2 . This model features Claire in her iconic "Made in Heaven" jacket, ready to face the horrors of Raccoon City in search of her…
FR Cette cheminée est dérivée de l’excellent site Hero's Hoard ( http://www.heroshoard.com/inn-and-tavern ) et permet un meilleur effet visuel avec l'incrustation d'une led à effet de flamme. La led utilisée est https://amzn.to/3M0QxFL Ce…
Switch cover plate with a dragon embedded.
Replace the original membrane keyboard with the far more functional mechanical keyboard by iNimbleSloth and my addition of a replacement case and keycaps. The case and keycaps attempt to capture the overall feel of the original ZX81,…
Resident Evil Series - Characters - Claire Redfield
It's for G2 bionicle heads (okoto heads). It's a remix
[Français en-dessous] [EN] Puller zipper Printed on Prusa Mini+ Printed in PETG ( Prima Creator filament ) Nozzle 0.25mm - layer 0.15mm infill 10% Depending you filament choice, clip it it's enough in the other way you must glue the thwo…
This is already mirrored. Print it, glue on the stamp handle, and stamp using gold fabric paint onto a black rectangle (5cmx8cm).
A figure of Enid Sinclair. Print it with supports enabled!
Sinclair Gas sign Lightbox 1.04 Flow Rate 15% Gyroid Infill 2 walls 4 Top shell Layers
Simple replacement case for the Sinclair ZX Interface 1. All screw holes in the same place as well as the feet wells (see photo). Uses the same screws as the original case which are 5x 3mmx12.5mm self tapping counter sunk 2x 3mmx10mm self…
This is a first attempt at a vacuum form mold set for the Sinclair ZX80 computer. The ZX80's case was originally vacuum formed from polystyrene sheets, only later becoming injection molded. This is an attempt to produce simple molds that…
Sinclair ZX Spectrum 16/48k Replacement for the original polystyrene inner Most of these inner polystyrene boxes have seen better days, often broken or suffering from the dreaded Plasticiser Migration which leaves a mess on the cables…
She's the materialistic, fashion-obsessed, and (occasionally) deeply thoughtful teenage daughter of the Sinclair family. This figurine captures Charlene Sinclair in all her prehistoric 90s glory, complete with her trendy top and concerned…
He's the rebellious, free-thinking, and often-clumsy eldest son of the Sinclair family. This figurine depicts Robbie Sinclair, the Hypsilophodon with a strong sense of justice and a flannel shirt to match. Often challenging the status quo…
The Cosby Show - Claire Olivia Hanks-Huxtable (Phylicia Rashād) - 1987-1990 3D printable model.
New case to accommodate the vDrive Microdrive replacement. Wanted something that matched the Spectrum+ model better and also the QL. Includes some glue on logos to finish it off. Also added an extra washer as my vDrive came with a…
Stranger Things Series - Erica Sinclair
Custom minifigure of Claire Finn Fromm The Orville It is very important to print the different pieces in the provided orientation to prevent undesirable fillings. No additional support is needed. Clean carefully the brim and any…
"I'm the mighty Megalosaurus!" Bring home the lovable, flannel-wearing patriarch of the Sinclair family with this detailed figurine of Earl Sinclair. From the classic 90s sitcom Dinosaurs , this model perfectly captures the look and…
She's the patient, loving, and often far too-sensible center of the Sinclair family. This figurine captures Fran Sinclair, the matriarch who keeps the household running despite Earl's incompetence and Baby's chaos. This model highlights…
I found the 25 mm length x 15 mm width best adapted. Printed in blue and yellow PLA without MMU. Used to fix a brokken zipper. A nice way to show support to Ukraine ! Imprimé en PLA bleu et jaune sans MMU, aux dimensions 25 x 15 mm pour…
EN : A model of dog tag lightning with the name of your super hero pet engraved inside and also your phone number to be sure that someone find your dog who's saving lives in solo, a gentle human could ring your phone if your pet he's lost…
Recycler et créer ! Grâce à des pièces détachées d'une caisse claire de marque Stagg de diamètre 14 pouces, je vous présente DEUX modèles. La Biohazard et la PrusaSnare ! Les fichiers sont partagés de façon à ce que vous puissiez, selon…
Since the trimmer design relies on the case length and concentricity, it doesnt matter how the case is kept in its place. Easy model but does its job well.
Model 1:1 Computer Sinclair ZX81 with stickers Instructions Print stickers in pdf , cropped and attach to model Category: Toys & Games
This is a leg spring for the Sinclair Spectrum 48K+. It fits on top of the leg to add some stiffness to it. This version is a little tighter than the original, I just prefer the leg being stiffer. The 128K leg spring is a little shorter I…
Case for the OqtaDrive Standalone PCB which you can find on PCBWay Sinclair ZX Spectrum & QL OqtaDrive Standalone v1.1 PCB - Share Project - PCBWay Also added a 2nd case bottom with a single LED hole for the v1.2b PCB. *Added a v1.2 of…
Alicia Clair Obscur Expedition 33 is a standalone character figurine for display and collection, designed for 3d printing and fan use. This model is ideal for display shelves, dioramas, tabletop setups, or gifting to fans of the game or…
Battery pack for the Sinclair FTV-1 micro television. Replaces the original Polaroid PL100 foil flat battery. Uses 2 x CR3032 in series for 6v with 1100mAh capacity which is close enough to the 1400mAh capacity of the original. Note these…
A while back I had an idea to make an actual paintress who rises up and "paints" a new number on her monolith. I was finally able to put it together. It uses a servo and a stepper motor to turn/lift the paintress. And a small OLED screen…
I'm updating a Timex Sinclair 1000 and wanted a nicer case (the original shows a bit too much damage). Sagittario modeled an amazing ZX81 case and generously shared his model source with me. He even moved the video out port to match the…
Box with fitted insert for Sinclair Comparator. I made the insert The box is a frogbox: https://www.thingiverse.com/thing:4094861 The latch comes from a remixed frogbox: https://www.thingiverse.com/thing:4700257
Storage box for Sinclair Microdrive Cartridges. Holds 20 cartridges with space between to allow easy access. Loosely based on an old Transform case I've had for years. Box has a hinged lid which needs attaching by feeding some 1.5mm…
Sinclair ZX Spectrum Storage Case/Box Redesigned storage box with hinged lid for the original rubber key ZX Spectrum. Has space for all the cables and Horizon cassette tape. Keep your “precious” nice nice and safe. Also good to re-house…
Sir Clive Marles Sinclair (30 July 1940 – 16 September 2021) was an English entrepreneur and inventor, best known for being a pioneer in the computing industry , and also as the founder of several companies that developed consumer…
Simple keyboard cap/cover for the Sinclair QL to keep the dust out of the keys. The cover fits snug on top of the keys only and not the whole machine as that is way too large for any normal or even large FDM printer, so I think this is a…
Бульбамех из игры Clair Obscur: Expedition 33 (Bulbomech)
Dino Sinclair from the classic Dinosaur Family.
When using the Sinclair expander mandrel with .223 Remington the case can hit the mandrel pin or go up the side of the pin which damages the case, when used with 300AAC blackout the body of the die is to long for the mandrel to fully…
Variation d'un projet de veilleuse reprenant le logo du Stade Toulousain Rugby, le club de rugby emblématique de l'Occitanie mais de la France en général (https://www.stadetoulousain.fr/). Le couvercle est interchangeable. L'ambition…
Record player from Clair Obscur: Expedition 33 as a Bluetooth speaker. The speakers are housed in the stool and both the stool and record player can be separated so better speakers can be connected instead. Parts: PAM8403 DIY Wireless…
Earl Sinclair is the main protagonist of the 1991–1994 Jim Henson sitcom Dinosaurs
Baby dino sinclai generated with AI from an image and simplifed with blender. I have also attached the untreated glb file with the textures.
Original modified to support 2.4" OLED display
Lampe a bande leds 5V, pour imprimante 3D , avec profilé 2020 ( modifiable ) .
I was looking for Maelle's brooch model for a cosplay. All I found costed a few bucks, but with my tight budget I can't even afford that, so I made my own version, (with the most basic tools, so it is what it is BUT IT'S FREE and for me…
OqtaDrive uPCB v1.2 Case. Case secured with 4x No.4 (2.9mm) x 1/2 inch (13mm) Phillips Self Tapping Pan Head Screws Recommend to print with no infill to ensure the screw supports have enough strength PCB can be found on GitHub (…
Simple keyboard cap/cover for the Sinclair ZX81 to keep the dust off the keyboard membrane. The cover only covers the membrane part, I've added a ZX81 logo STL for those with a multi-colour printer, just add them together to the print bed…
English: The Dunphy family is finally complete on your shelf! This 3D printable set features the iconic duo Phil and Claire Dunphy from the hit sitcom Modern Family . Capture Phil's "Phil's-osophy" vibe and Claire's organized leadership…
This is a remix from https://www.thingiverse.com/thing:398515 Bonjour Inspiré de ce travail : https://www.thingiverse.com/thing:2959937 Merci beaucoup jubidev J’ai adapté le concept pour des led de type G4 (12V) plus courantes et assez…
Only change from Tom's design is to support a 2.4" OLED. No other changes were made.
🌙✨ Laissez la magie opérer sur vos murs ! Cette décoration murale 3D capture un moment tendre et féerique entre deux personnages emblématiques – Mickey et Minnie – assis sous un ciel étoilé 🌟, dans une silhouette élégante en forme de tête…
The Ballet is a lean looking puppet that flies in the air. Very easy to print and assemble. It stands about 19 cm tall when assembled, it has a lot of details on it that kind of get lost when printing FDM, but if you use a resin printer…
Air conditioner remote control holder model YAY1F2. An ideal way to store the remote control and prevent it from getting lost. The remote control shown in the photos is used in air conditioners from brands such as GREE, Dreiha, and…
FR Vous avez installé une Dust Shoe radio pilotée pour l'aspiration automatique à la bonne hauteur des poussières. Vous pouvez maintenant la transformer facilement pour travailler l'aluminium dans de bonnes conditions avec un éclairage de…
Variation d'un projet de veilleuse reprenant le logo de l'Union Bordeaux Bègles, club né de la fusion en 2006 du Stade bordelais université club et du Club athlétique Béglais ( https://www.ubbrugby.com/ ). Le couvercle est…
A little support bracket for the Sinclair QL MicroPico Drive SD card Microdrive emulator. It has been separated into separate parts so that it will fit the size to be posted as a LArge Letter in the UK. The details for the MicroPicoDrive…
Basically a stand to fit in the QL to stop the OqtaDrive PCB sagging and possibly shorting on the motherboard. Also a small cap to go over the pin header to help route. PCB can be found here: OqtaDrive QL v1.1 - Share Project - PCBWay…
Llavero inspirado en Lucas Sinclair de la serie Stranger Things
Replacement case for a Sinclair Microdrive Cartridge. Printed in two halves which need to be glued together. I went with this option to make it easier to add logo's (see Sabreman example photo) and this also removes the need for any…
When using the Sinclair expander mandrel with .223 Remington the case can hit the mandrel pin or go up the side of the pin which damages the case. This insert is a press fit inside the Sinclair mandrel die body and aligns the case with…
Simple bracket to allow the standalone PCB to be housed in a real Microdrive case. Closes off the cartridge hole so a logo can be mounted. PCB can be purchased here…
Nouvelle version de l'éclairage led de la tête d'impression Prusa i3, Meilleur centrage de l'éclairage, Ensemble protection ventilateur et support éclairage monobloc, Passage de fils de 0.6 de diamètre, Fiche mâle-femelle pour démontage…
Éclairage de la tête d'impression sur Prusa I3. Matériels : 1 interrupteur 12v 1 led navette 12v Fil d'alimentation multi-brins Le support de led est vissé à l'aide des vis de fixations du ventilateur d'extrudeur. Les fils sont soudés…
support bande led imprimé en PLA sur ma elegoo pour pour éclairer ma Prusa.
The bracket consists of two parts that must be glued together. A pyramid-shaped tenon makes it easier to position them. Each bracket is attached to the Skadis panel using one M4 screw. The file is created so that M4 brass threaded insert…
