Search results: curver

Sort order

39 models

P
PrintablesDejan B.

Curver Toolbox Clip

A Replacement clip for my Curver toolbox. PETG 0.2 layer height 100% infill support needed

Downloads
149
Likes
7
Rating
5
P
PrintablesSebazzz

Curver pedal bin (pedaalemmer) lever bottom part

Update 2023-09-16: Added single piece print for suitable printers. My toddler trashed our pedal bin. But no worry - this replaces the lever part between the pedal and the metal rod that lifts the lid. Split into two parts so you can print…

Downloads
121
Likes
4
Rating
5
P
Printableslucyferror

Curver Laundry Bin Lid Hinge Pin

Hinge Pin/Clip holding lid of my laundry bin got damaged (snapped in half) and lid was loose. It's a Curver bin which is quite expensive and nothing wrong with it other than that (and small chip underneath lid hence 2 cable ties holding…

Downloads
101
Likes
4
Rating
0
P
PrintablesHavok

Curver Toolbox Clip Old Version

Clip für die alten Curver Boxen mit 2,5mm Stahlstift Ist dicker als der original Curver Clip damit er nicht so schnell wieder bricht. Print at 100% infill ASA, ABS or PETG Best.

Downloads
78
Likes
4
Rating
0
P
PrintableskUMters

Curver LAUNDRY HAMPER rod replacement

Rod replacement for Curver LAUNDRY HAMPER https://curver.com/uk_en/style-laundry-hamper-1 Square middle part for better/solid sustain against break and easier printing

Downloads
68
Likes
9
Rating
0
P
PrintablesDadgrammer

Curver landry basket replacement pin

Curver landry basket replacement pin I made it in bambu studio from primitives printe on Bambu lab x1c .4 nozzle .2 layer height Fiberlogy ABS

Downloads
66
Likes
8
Rating
5
P
Printableskampfwuffi

Rails for Under Desk Storage Bins / Boxes CURVER INFINITY 11L / 17L

Rails for Under Desk Storage Bins / Boxes. Left, right and center rails. Compatible with CURVER INFINITY 11L and 17L boxes (without lids) Box dimensions: L35,6 x B26,6mm Remixed from IKEA Trofast rail system. LONGSIDE and NO LONGSIDE…

Downloads
45
Likes
39
Rating
0
P
PrintablesM.M.B.

CURVER Deco Bin Garbage Bin - Bag Holder Replacement

These bag holders make the garbage bin look nice, and the bag stays in place. But it breaks sometimes. The challenge here is the size of the complete part, which is slightly larger than the MK3/4 printbed. Therefore the model is…

Downloads
45
Likes
3
Rating
0
P
PrintablesAdam

Under desk Curver box hooks

Those hooks fits a 16L Curver box - 39x30x21 cm, but they may probably fit others. The top height of the edge of the box is important. Each hook is attached to surface by 4 screws.

Downloads
44
Likes
18
Rating
0
P
PrintablesDejan B.

Curver Toolbox Clip pt2

The other part of the clip for my Curver toolbox. Works perfect. Link here: https://www.printables.com/model/412420-curver-toolbox-clip PETG 0.2 layer height 100% infill no support needed

Downloads
35
Likes
1
Rating
0
P
PrintablesThis Noise

Curver storage box risers

These are simple riser hooks to attach to Curver brand storage boxes, specifically their infinity dots range. These are an affordable & sturdy storage box in the UK, found in many shops (mine came from B&Q) and they were £2.50 each. These…

Downloads
28
Likes
7
Rating
0
P
PrintablesJędrzej K.

Drawer slide rail for Curver Inifinity box

This is my first 3D model. I needed a small drawer to keep any kind of small stuff handy but not cluttering my desk. So I designed a set of slides that let you make a small 23x15x5cm box into a drawer.

Downloads
26
Likes
8
Rating
0
P
PrintablesPufikon

Curver Tbox clip

Small clip to close the lid better on Curver T Box. Remix from original model for Samla box only a bit longer.

Downloads
26
Likes
2
Rating
0
P
PrintablesAndreas Gohr

Curver Toy Box Handle Insert

We have some 20+ year old Curver boxes - not sure of the exact model. The EAN code suggests that they were called “Curver Toy Box 29l” not sure if they are still produced and under which name. They are nice and sturdy, but have one flaw:…

Downloads
25
Likes
2
Rating
0
P
PrintablesHolzerMax

Replacement handle for "curver" tool box

printed in PLA with 4 perimeters and 20% infill, plenty strong enough. only needs very little supports on the buildplate for the hinge pins. Should work with any filament (except maybe TPU)

Downloads
23
Likes
2
Rating
0
P
PrintablesThis Noise

Curver storage box name plate

After making https://www.printables.com/model/830367-curver-storage-box-risers I had the issue of having to move many boxes to see what I needed. The solution is simple, a small hooked nameplate. Tag ha a 60mm writing area so plenty of…

Downloads
20
Likes
4
Rating
0
P
PrintablesYourigh

Laundry basket hook (curver)

Simple hook. I use it to hang bag for socks or some damp handtowel. Print PLA

Downloads
19
Likes
5
Rating
0
P
PrintablesGrogg3D

Curver "Ready to Collect" Bin Mount for Ikea Skadis Board [2 variants]

The Curver (brand) "Ready to Collect" bin comes with a mount plate but it's for screw mounting to a wall or other vertical surface This is my Ikea Skadis version of the same mount. It has reinforced Skadis mount hooks (my 5x5mm versions)…

Downloads
18
Likes
2
Rating
0
P
PrintablesKlopDesign

Replacement wheels Curver drawer system

The Curver drawer system came without 4 out of 16 wheels used for the sliding. So modelled and printed 4 extra ones. Clicks into place. Printed with PLA, 0.2 layer height with full organic supports.

Downloads
17
Likes
0
Rating
0
P
PrintablesOliver

Kressezucht - Einsatzplatte für Curver Infinity Organizer 1,5l - Cress cultivation - Insert plate for Curver Infinity

Eine Lochplatte für einen Curver Infinity Organizer 1,5l zu Kressezucht. In einer Ecke gibt es ein Ausgussloch für das Restwasser Die Curver Infinity Organizer kann hier bezogen werden. Zwei Stück für 1,5€…

Downloads
17
Likes
4
Rating
0
P
PrintablesTritschi

Spare Handle for Curver ToolBox

Org. handle broke after decades of usage. So I replaced with a new design. Designed in TinkerCad. Printed on my BambuLab A1 with AMS lite: Handle: Tinmorry PETG-CF in olive, Supports same, support interfaces in Bambu PLA-PETG support…

Downloads
15
Likes
0
Rating
0
P
PrintablesLadrap

Curver ready to collect 10l plastic ring

I lost the plastic ring that secures the bin liners for my caddy and so printed this version that fits really well. The part was modelled in free CAD and just about fits in my Prusa mk2.5 bed Printed in PLA 0.8 mm nozzle and layer height…

Downloads
15
Likes
0
Rating
0
P
PrintablesSchachtelmacher

CURVER Verschluss-Deckel

Ersatz für den Ausgießer einer CURVER-Dose 2,2 Liter.

Downloads
12
Likes
3
Rating
0

Réparation panier à linge 25L Curver / Repair parts laundry basket 25L Curver

Fabrication d'une poignée pour un panier à linge (marque Curver) : Poignée de remplacement. Impression sans support. Pièces à positionner sur le coté. Pièces à coller avec colle chaude.

Downloads
10
Likes
0
Rating
0
P
PrintablesHaasík

curver toolbox separator

Divider for the largest compartment in Curver transparent toolbox organizers (Curver toolbox premium M)

Downloads
8
Likes
2
Rating
0
P
Printablesnaivsupr

Wheel - Curver Storage Box

Prototype wheel printed with PLA, 0.20mm, 0.4nozzle. To check fit and finish.

Downloads
6
Likes
1
Rating
0
P
PrintablesMarek Giża

Curver box holder

This is a simple wall-mount bracket designed for Curver plastic storage bins like the one shown in the photos. It lets you mount the bin securely to a wooden board / wall while keeping full access to the flip-open front . I made this…

Downloads
6
Likes
0
Rating
0
P
Printablescth35

Curver pedal bin Single

Fork of initial project. The single piece part was missing pins so I've added them.

Downloads
6
Likes
0
Rating
0
P
PrintablesThomas

Curver Click'n Fit Handle/Lock

A Lock/Handle from my old Curver Click'n Fit box broke and so I designed a new lock based on the original. Print Settings Material: PETG at least Infill: 15% Perimeter: 4 for best stability Supports: On Everywhere, Snug fit ⚠ The bgcode…

Downloads
6
Likes
0
Rating
0
P
PrintablesPavel
Downloads
5
Likes
1
Rating
0
P
Printablespiwonnn

Curver sigma rack stackable storage

Storage container designed to fit Curver Sigma Rack plastic poles with a diameter of 33 mm.

Downloads
4
Likes
0
Rating
0
P
PrintablesJohn Ode

Replacement Lid fits on Curver Organic Waste Container

The snap in place hinge on my original broke, so I designed a replacement part to fit this organic waste container from Curver. Mine was printed in PETG. I suggest you print it flat side down, with a textured print bed, you'll get a nice…

Downloads
3
Likes
0
Rating
0
P
Printablesbaardaap

Curver Coolbox Handle Cap

I lost the cap which holds the handle of the coolbox in place so I drew a new one.

Downloads
1
Likes
0
Rating
0
P

Curver Kühlbox Verschlussklammer - Cooler Box Lid Bracket

A clamp for the lid of a Curver cooler from the ~1970s For those who want to preserve this iconic piece of plastic history. Mirror if needed (L and R clamps are mirrored parts).

Downloads
0
Likes
2
Rating
0
P
Printables

CURVER Verschluss-Deckel

Ersatz für den Ausgießer einer CURVER-Dose 2,2 Liter.

P
Printables

Spare Handle for Curver ToolBox

Org. handle broke after decades of usage. So I replaced with a new design. Designed in TinkerCad. Printed on my BambuLab A1 with AMS lite: Handle: Tinmorry PETG-CF in olive, Supports same, support interfaces in Bambu PLA-PETG support…

P
Printables

Curver Toolbox Clip pt2

The other part of the clip for my Curver toolbox. Works perfect. Link here: https://www.printables.com/model/412420-curver-toolbox-clip PETG 0.2 layer height 100% infill no support needed

P
Printables

Curver "Ready to Collect" Bin Mount for Ikea Skadis Board [2 variants]

The Curver (brand) "Ready to Collect" bin comes with a mount plate but it's for screw mounting to a wall or other vertical surface This is my Ikea Skadis version of the same mount. It has reinforced Skadis mount hooks (my 5x5mm versions)…

P
Printables

Replacement Lid fits on Curver Organic Waste Container

The snap in place hinge on my original broke, so I designed a replacement part to fit this organic waste container from Curver. Mine was printed in PETG. I suggest you print it flat side down, with a textured print bed, you'll get a nice…