135 models
Instructions: For most of the aspects, refer to the picture above. For the seats, the seats with a rectangle on the bottom get inserted into the middle two sections (two seats back to back) and for the ends, insert the seats with a circle…
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant
This model was inspired by https://www.thingiverse.com/thing:3290283 This is not a remix but it was created from the ground up. Unfortunately I only had white PETG at that time. A PLA would look much better.
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for PETGSource material: PET
Remixed an original bar sign design from nwoutback on Thingiverse to include hooks for keys. I drilled 2 holes for hanging after the fact but may add them to this design to make it easier for other users. Painted lettering with white…
Print approx. €7.09–€8.66 excl. taxPreliminary estimate for one variant
Náhradní pouzdro (kapsa) pro lamelu o šířce 36 mm. Pouzdro je určeno pro rošt rámu menší než 100 cm. Rozteč děr pro kolíky je 65 mm. Kapsu lze použít k velkému množství roštů, většinou o počtu 28 lamel. K příkladu uvádíme: Primaflex,…
Print approx. €4.00–€4.89 excl. taxPreliminary estimate for one variant
Didn't find a proper adapter for this bottle so I made this one.
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
It's a very easy to print model. The ballerina prints very well using organic supports. You can add a colour change when printing the base to highlight the name Daniella.
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
Schluß mit Platzproblemen für Sammler von Jack Daniels. Hier können 2 Flaschen Platzsparend gestellt werden. Weitere Modelle für Packkarton (Online), Blechdosen und Dosen wird noch folgen.
Print approx. €10.50–€12.84 excl. taxPreliminary estimate for one variant
Nur für Flaschen im Karton für Jack Daniels zum besseren Stellen. Jeweils für 1 Modell oder gleich 2 Modelle auf dem Druckbett
Print approx. €5.70–€6.96 excl. taxPreliminary estimate for one variant
Für Sammler zum besseren stellen. Es gibt schon Varianten für nur Flaschen und Flaschen im Karton
Print approx. €6.46–€7.90 excl. taxPreliminary estimate for one variant
In Action: https://www.youtube.com/watch?v=Ij9UewAz\_rA The Mechanism: The title of this design (almost long enough to be a Lina Wertmuller film) pretty much says everything one needs to know. It uses an independent wheel (the rotation of…
Please read this before any use of the font. ----------------------- This font is for PERSONAL USE ONLY: Do not under any circumstances use the font in public media unless permission is given from designer 3D-Druckwelt or legal reseller.…
SS Daniel J. Morrell was a 603-foot (184 m) Great Lakes freighter that broke up in a strong storm on Lake Huron on 29 November 1966, taking with her 28 of her 29 crewmen. The freighter was used to carry bulk cargoes such as iron ore but…
I designed a base to build a hookah out of a Jack Daniels 0.7l bottle. I've tried and smoked with it and it works just fine. So if you are not able to bring a whole hookah or want a little one for yourself this is the right thing for you.…
This is a small Jack Daniels Logo sign for your wall or desktop. It is a really quick file to print. It measures 117mm x 159mm. Print at .2 with a color change at .6mm. Ptint it with black on white or white on black This sign is light…
The weak hinge is now fixed uploaded 28 February see picture. I got a request for a .308 ammo box. The spacing is 20pcs/12,6x75,24mm between the insert top and bottom. I made 3 different versions/logo. Let me know if you want another…
The cookie cutter is about 80 mm in length on its longest side. I printed at 0.2mm layer height at 10% infill. Check out @dailycookiecutter on TikTok for more cookie cutters!
Bouteille lithophanie Jack Daniel's Dimensions 84.7 x 84.7 x 246.3 mm. La bouteille est entièrement ouverte en dessous afin de laisser passer au maximum la lumière des leds . Le lien de l'eclairage:…
Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%. Filamento BASICO de Control 3D en varios colores (Español). Espesores de las capas amarillo 2mm, negro 1mm y blanco 0.8mm Kingroon KP3S Printed with 0.4 nozzle, layers…
A nice coaster for your house or a gift.
The top part of the whisky storage bottle needs to be printed upside down and can be a bit challenging. To print it hollow you need to use these settings: (see screenshot) 4 Perimeters 0 top solid layers 0% infill Use lots of cooling and…
I made simple jack daniels logo thing to my led. size 270X270X2mm
1:24 scale model daniella
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A simple drinks coaster I painted them in Acrylic then gold for the writing. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 10 Filament: 3DQF PLA any Category: 3D Printing
Estabilizador de cañón para guardamanos tipo Daniel Defense. Valido únicamente para Airsoft. Es posible que requiera pequeños ajustes dependiendo del fabricante. Probado en guardamanos Madbull. Esta pensado para sujetarse al cañón…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Here is a modified hinge repair plate remixed from Daniels design. Difference is that the centre chanel is widened and extended. Fits my hinge, but may suit a few others as well. The hinge from the original design should still fit this…
Printed on a Creality Hi and K1 Max with CFS upgrade The embossed model if you don't have a multi-colour printer you need to set a pause and change filament. Thank you for downloading my creation :D Please consider following my Youtube…
Jack Daniel's cookie form cutter printed with PETG/PLA 0.16 or 0.2 layer Appreciate for any support - comment/like/follow/make/share
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Jack Daniel's LAMP Durchmesser ca 20 cm
Ich habe hier Jack Daniels Untersetzer mit dem passenden Halter. Es passen 10 Untersetzer in den Halter.
This is my Macbook Pro 15" stand that I made with Fusion 360.
Daniel Jackson ship at 1:2000 scale (40cm long). The stand is available on my profile, only the “support interface" is specific to this model : https://www.printables.com/fr/model/250596-stargate-ship-stand At 100% and with MMU, the print…
Iconic Movie Moments - The Birds - Melanie Daniels Attacked - 1963
Material: PLA Infill: 20% Supports: Yes
🇺🇸 Welcome to Denver, the Mile High City! MiniWorld3D's founder Dany Sánchez lived in Denver for some time and created several models representing landmarks of the city. The Daniels & Fisher Tower is a landmark of downtown Denver, it sits…
Classic, bold, and timeless. This Jack Daniel’s–inspired coaster digital model protects your desk from drink marks while adding a strong whiskey bar aesthetic to your setup. Perfect for home bars, desks, and collectors.
Daniel Boone - Daniel Boone (Fess Parker) - 1964–1970 3D printable model.
I have here Jack Daniels coasters with the matching holder. The holder fits 10 coasters.
Decorativo para arbol navideño personalizado para nombre Daniela
POZOR!!! jedná se o vršek na litrovou falšku! 0,7l má jiný závit
Made this in Luban software… Formula 1 logo style Lightbox, Litho. I used LED strips to light it I have included files with the holes and without the holes for wiring. Printed the boxes flat without support and the lids vertically 0.1…
print logo side up with supports, pause required to change filament color
I hope you like it ;-) If it's so, you may help me for making more by a little donation here: https://www.paypal.me/originaldoc --- Espero que te guste ;-) Si es así, puedes ayudarme a hacer más con una pequeña donación aquí:…
This is a Jack Daniel's sign for your wall or bar. It is printed at .2 beginning with black, then white at .6 then yellow at 1mm. I have enjoyed Liquor and Beer advertising since my Dad and I started collecting beer signs years ago. I…
Daniel and the Lion Statue Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) See my other Statues here: https://www.printables.com/@StudioMechanik/collections/2993601
Der Fuß dient zur Beleuchtung einer Standard-Jack-Daniel's-Flasche. Die Idee entstand als Dekoration für eine Theke zum 18. Geburtstag. Der Fuß wurde so entworfen, dass er eine normale 0,7-Liter-Flasche Jack Daniel’s aufnehmen kann.…
I hope you like it ;-) If it's so, you may help me for making more by a little donation here: https://www.paypal.me/originaldoc --- Espero que te guste ;-) Si es así, puedes ayudarme a hacer más con una pequeña donación aquí:…
Jack Daniel’s Blackberry Display Box Show off your Jack Daniel’s Blackberry with this custom display box. Designed with the same attention to detail as my other whiskey boxes, this model is tailored to fit the new Jack Daniel’s Blackberry…
Thread adapter to use dispenser from sterillium 1L bottle on a Jack Daniel's 0.7L bottle Hint: If u use the Fusion 360 part and export you have to upscale 103% 103% and 180% in X Y and Z, since I did not find any matching thread in F360,…
Jack Daniel’s Tennessee Honey Display Box Whether you want a premium way to store your whiskey or a standout piece for your collection, this box makes your Jack Daniel’s even more eye-catching. Features: Perfect fit – Designed…
Customized version of http://www.thingiverse.com/thing:834725 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=834725 Instructions Using the following options: Rotation = 50 Loop_x_position = -125 twist =…
modele que j'ai crée pour faire une bouteille de jack daniel's honey avec une led multicolor pour un bar ou bureaux
I'm using Danielsan-84's Linear X and Z setup on my Bear. Needed an SKR enclosure that fit better. Basically extended the bottom of the enclosure to match the frame.
Porta Penne con Porta cellulare di libera ispirazione stile Jack Daniel's, per le stampanti con piatto piccolo, va diminuita la grandezza dell'oggetto con il programma di slicer. Con le misure attuali si può inserire nel box realizzato…
Recently I won a golf tournament that required one to have a bottle of Jack Daniel's Whiskey in their golf cart at all times, in order to play a mulligan, one had to swig a chug… Needless to say, I wanted something edgy to keep the bottle…
Step into the world of espionage with this stunning 3D printable James Bond figurine that brings the iconic secret agent to life on your desk! This meticulously detailed STL model captures Daniel Craig's commanding presence in a sharp…
Flaschenhalter
Jack Daniel’s Fire Display Box Show off your Jack Daniel’s Fire with this custom display box. Designed with the same attention to detail as my other boxes, this model is tailored to fit the iconic Jack Daniel’s 1 liter bottle perfectly.…
I printed this in PLA using two colors (purple and light blue), width 100 mm.
I designed this rack to be screwed into the bottom of a shelf to save space compared to the original retail rack. The informational strips with the paint colors and barcodes must be cut down in order to fit on the front. Print 2 of each…
Verschluß für eine 330ml oder 500ml Dose mit Jack Daniels
Customized version of http://www.thingiverse.com/thing:834725 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=834725 Instructions Using the following options: Rotation = 50 Loop_font = Chewy…
Remix I did for my younger brother as a Christmas ornament. Added his name and the police district we live in. Should be laid flat to print and can be scaled upwards to make thicker if need be.
A little custom designed keyring. Check our my catalog of cutom keyrings with different names and designs. If you can't find the design or name you're looking for I can make yours for only $5, just find me on Fiverr :)…
In Nebuchadnezzar’s dream (Daniel chapter 2) the statue is huge and made of different materials: a head of gold, chest and arms of silver, stomach and thighs of copper, legs of iron, and feet of iron mixed with clay. A stone cut without…
This is a remix from volly case for the Esp Ebus 6.1 from danielkucera https://github.com/danielkucera/esp-arduino-ebus main differences: closed the usb-c port. centered the connector.
También disponible en Thingiverse: https://www.thingiverse.com/thing:6824105 Cults3D: https://cults3d.com/es/modelo-3d/casa/adorno-bola-de-navidad-danielle El modelo de ejemplo está impreso en PLA efecto plata.
Italiano Questo design è gratuito a beneficio della comunità, ma se ti piacciono i miei design e vuoi contribuire, puoi fare una donazione a PayPal , che sarà molto apprezzata. Questa è una scritta decorativa che puoi stampare in…
altura de capa 2.0 relleno apenas 10% velocidad 50mm facil de montar tira led de 3metros sin soporte
Druckbar in einer oder mehreren Farben. Wenn man es in mehreren Farben druckt, benötigt man graues, weißes, braunes und gelbes Filament. Die Teile einfach zusammenkleben! Printable in one or more colors. If you print it in multiple…
Jack Daniel’s Apple Display Box Show off your Jack Daniel’s Apple with this custom display box. Designed with the same attention to detail as my other whiskey boxes, this model is tailored to fit the iconic Jack Daniel’s Apple bottle…
Same printing and assembly instructions as the original. Only shifted the rear chamfer to better fit the frame.
Quick remix so tires and wheels are 2 parts with the intention to print the tires in tpu and, in my case, the wheels in PETG. I have not tested yet so may need some tweaks EDIT 1 : split into two models. increased lip on wheel. made space…
AS7-D Atlas Danielle for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files •…
LLAVERO DANIEL = KEY RING DANIEL
Este es un modelo proxy con ninguna intención económica. Está hecho por y para la comunidad ya que se usan varias partes que NO he diseñado yo. Listo para imprimir y pintar, ¡espero que os guste! This is a proxy model without any economic…
LLAVERO CREADO CON EL NOMBRE DE DANIEL, ALGO SENCILLO PERO DISTINTO.
I had to use a brim or else the ring would leave the build plate
Jack Daniels Viski Lithophane
its just a hair brush and not a knife
Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: line1 = Daniel line2 = line3 = line4 = line5…
# Daniela Di Giacomo - Modelo Escultórico en 3D Este es un modelo en 3D de alta calidad de la conocida presentadora de televisión, modelo y ex-Miss Internacional venezolana Daniela Di Giacomo . Diseñado con gran atención al detalle, este…
it's a remix
Remix původní verze vršku pro 1L flašku Jacka Danielse s vylepšením pro napojení hadiček, u předešlé se po čase zlomí.
Für Sammler zum Platzsparenden stellen. Es gehen auch andere Dosen anderer Hersteller 0,33
I had to use a brim or else the ring would leave the build plate
Topper para tartas con el nombre de Daniela
Daniel – Decorative 3D Print Name Sign Add a personal touch to your space with this elegant “Daniel” name sign. This model is part of my 3D Name Sign Collection . Check my profile for other names! ✨ Features Elegant layered name design…
