63 models
Wall mount for the 20V DCF840 DeWalt Impact Driver. I started with Slavish's design for a 12V Impact Driver mount and modified as needed. Thanks to Slavish for a place to start and a great idea. See the following link for a similar mount…
Print approx. €6.85–€8.37 excl. taxPreliminary estimate for one variant
Rarely used Nacs adaptors were taking up valuable real estate in my driver door compartment so with this mash up they are now neatly stored in my center console as part of the supports for my printed shelf system.
Print approx. €19.46–€23.78 excl. taxPreliminary estimate for PETGSource material: PET
Designed based on the handle of a Dewalt DCF787. I cannot confirm whether this will fit other Dewalt tools. Features Positive retention on the bits so they do not fall out Produces a satisfying snap when bits are inserted into the holder…
2x M4 screws HSW Dewalt Impact Drill
A holder for the DeWalt DCF887 impact driver. For mounting below a shelf. Will hold the driver safely even with the heavy 5 AH battery. The reason for the 10 cm wide mounting bracket is to make sure the wide battery doesnt collide with…
Do you own amazing gyroscopic DeWALT DCF680G2 and has no place for storage? This hanger holder is perfect for hang screwdriver and two batteries in bottom of shelf. There is hole for screwdriver and small gap to keep device in even in…
Updated: 2026-02-23-1400 DeWalt Impact Bit Clip Flex Used an improved bit holding mechanism from another project that upgrades and streamlines the design in several ways. The only somewhat downside is that there are now 5 instead of 7…
Modeled off the existing part that GM doesn't sell as a separate part from the whole port assembly. I printed in PETG, fits nice and snug.
Print two each of the included .STL files in the original orientation. Insert into wall at appropriate distance.
These two drills, the DeWalt DCD771 and DCF885 are commonly sold in a pair. I remixed a holder for the 887 to fit the 885, and created a holder for the 771 from scratch. I printed in PLA with 3 walls, .2mm layer height, 100% infill, with…
A holder for the Dewalt DCF682 gyroscopic screwdriver for use with the GridFinity system. Contains room for 2 batteries, 8 bits, and the electric screwdriver itself. Will fit on a Prusa Mini+. Set infill to at least 15% so that the holes…
A somewhat rough but high poly scan of a DeWalt impact driver. The battery is attached but not fully scanned and there was a little wear and tear on this tool. This should aid in designing mods, accessories, mounts and various other…
庆祝🎉 因为搜索不到挂洞洞板的 DCF850 型号，所以决定自己尝试建模打印。 第一次使用Fusion360建模制作而成，非常满足。效果满意👍。 请注意⚠：必须要使用支撑。 我不会矫正模型底面，在拓竹切片软件中我建议使用2根棒棒的那边成为底面，相当倒着打印。
Snap-on fit magnetic bit and fastener holder for the DeWalt DCF850 impact or DCF870 hydraulic drivers. Bits are NOT firmly held, magnets hold the parts in place as you climb ladders etc but leave the bits freely accessible for one-handed…
Printed in PETG with 5 perimeters for added strength.
Used @DIYwithJJ's instructional video to combine @KajasX's dust port attachment for DeWalt DCW600 DCW604 with @PouOu's excellent DeWalt Airlock Adapter (male end). The male airlock end is the same dimensions as on my palm sander DCW210,…
A hanger for the DeWalt DCF680 featuring: trigger cutout allowing storage in both straight and angled grip configurations storage for spare battery - fits with or without protective cap storage for DeWalt tough case - keeps your bits at…
Snap-on fit magnetic bit and fastener holder for the DeWalt DCF921 or DCF923 impact drivers. Bits are NOT firmly held, magnets hold the parts in place as you climb ladders etc but leave the bits freely accessible for one-handed use. Great…
This is a wall mount for the DeWalt DCF894 20v cordless impact. It has two vertically spaced 4.5mm holes, so you can mount it to a stud using #9 x 2" deck screws, or similar. This requires 4 m3 heat set inserts and 4 m3x10 socket head cap…
Print this in whatever material you like. Switch filament at the appropriate layer for contrasting color infill. You will need 4 ea, m3x8mm socket head cap screws and m3x5 long, ish heat set inserts. If you are unsure about the heat set…
Hello! I'm an Electrician making inserts for my tools. I designed this insert to fit with the stock milwaukee 1x1 and 2x1 bins. That wat you can fit your preferred bit organizer or trays. I still plan on adding a version that's Gridfinity…
This mounting plate allows you to replace the worn out guts found inside the Dyna Comp DCF 353 PSU with a new Meanwell RPT-60A Power supply. The RPT-60A provides the 5v, 12v and -5v just like the original PSU. The PSU mounts to the plate…
OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no…
3D scanned holder to precisely fit the contours of the DC921 and DCF923 impact drivers for DDD Wall Control System
Gehäuse für DCF 77 Funkuhr-Empfänger: Conrad Best.-. Nr. 64 11 38 https://www.amazon.de/CE-641138-DCF-EMPFAENGERPLATINE/dp/B003A65L5U Hardware: 2x M3 x 18 Senkkopfschraube…
A Threadboards holder for the DCF682 DeWalt Cordless Screwdriver. Printed in PLA 0.28mm layer height 4 outer walls, top, bottom and sides 20% gyroid infill
LED Clock (DCF77) A visualization for the DCF77 signal using 2 WS2812 / Neopixel LED Rings (60 and 24 LEDs). The DCF77 Signal is received via a Websocket Stream, buy you can adopt it to use a real DCF77 Receiver Module. The intention is…
A wall mount tool holder for your DeWalt DCF787 ¼" Impact. Vertical screw holes so it can be mounted to a single wall stud. You will need 4 m3 x 5mm heat set inserts and 4 M3x8mm socket head cap screws.
The holder securely stores the DCF885 on a wall, tool board, or workshop panel while keeping it instantly accessible. The fit is tuned specifically for the DCF885 body profile and battery interface, ensuring the tool stays locked in place…
Simple L bracket to hang my DeWalt ratchet from a 2x4. Printed in a little more than 30 minutes with variable layer height on my Core One. I did not do this, but you might consider printing it so it lays on its back instead of upright.…
Hammer drill DCD999 Impact driver DCF850 Battery charger DCB1104 Screwdriving bit set DWAUMF30SET Drill bit set DWA1180
Modified housing parts to accommodate DCF-77 movements with maximum dimensions of 58 mm x 58 mm. For example this movement: https://www.amazon.de/TFA-Dostmann-60-3518-01-Funk-Uhrwerk-Uhrzeigerset/dp/B00TOBU9B6 All other parts please use…
Printable mount designed to hold the DeWalt DCF510 20v Brushless ratchet when paired with the 2AH battery
Print it in whatever material you want. PLA works just fine for this. For the contrasting color, switch filament at the appropriate layer. You will need 4 m3 x 4'ish mm heat set inserts and 4 M3x8 socket head cap screws.
DeWalt DCF510 drive adapter holster Printed in PLA with 5 walls and 100% infill. Never mind the layer lines, I used an old printer that needs maintenance.
The cheap DCF77 module you can get have bad solder pads for attaching pins and you will probably rip of the antenna cable while handling this module. That's why I created a thingy that keeps both in place and you can use it as module in…
My dewalt gyroscopic bitholder felt a bit sloppy. This bushing makes it more tight. Will add a bit more friction, your battery may have to work a bit harder. https://www.buymeacoffee.com/fagerstrom
So what is this? It's a standalone DCF77 transmitter designed to be used with any wrist watch that is capable of receiving the signal. (Casio Wave Ceptor series etc.) Features: Connects to your local WiFi network. Syncs the exact time via…
Upgraded version to fit both hour and minutes hand on the DCF Clock (+optional seconds hand) Used DCF clock (Weltbild HD-1688): https://www.ebay.de/itm/355420934499 Printed with 3 walls, tops and bottoms These hand need a bit fine tuning…
More rugged than the other types that I have printed for my lighter driver/drills.
OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no…
This is a 3D scan of a DeWalt DCF860. The battery mount on the bottom is imperfect, otherwise the model is to scale and dimensionally accurate.
Double hex-shank bit holder for DeWalt DCF870.
this support is used to clamp the drywall gun on its upper clip. the support is designed to be fixed under a shelf not on a vertical wall. the lower holes are used to pass a longer bit to screw the support.
DeWalt DCF513B 20V Ratchet Wall Mount – Print Info & Notes I designed/printed a wall-mounted holder for the DeWalt DCF513B 20V Ratchet and wanted to share the printing details for anyone interested in making their own. Print Settings…
I realized that I was going to lose the attachments for my Dewalt DCF500 so I designed this bracket which would keep them together, visible and could clip to the ratchet when it was not being used. Printed in PLA with no supports. Version…
TFA Clockwork "Funk-uhrwerk 60.3818.01" comes without any means to hang the clock to the wall. This part is a simple fix for that issue. Prints fast and works quite well.
A simple free-standing case to hold the Eurotime 51900 DCF77 clock module to make a small desktop clock. The DCF77 module is available from Conrad Electronic, order no. 641871. Best printed face down (rotate the STL file 250° around x…
This model is a divider that fits inside the tstak box of dewalts DCF982NT impact driver. Each of the circular divisions is 75mm deep and has a diameter of 30mm, it can hold the inbus bits for this impact driver and could potentially fit…
Multiboard hanger for the Dewalt Cordless Ratchet
Boop Blocker Shield Take a look at this project (and contribute) on GitHub ! This is a simple "shield" for the 2020 DCFurs badge (the "Boop Blocker"). It is meant to protect the LEDs so they don't pop off, as was common in 2018's badge.…
es una estatua de dragon con las alas abiertas
Holder designed for the DeWalt DCF680 tool. It has a satisfying snap-in lock. You will also need a T-Clip from the original design. Print orientation as is, no supports needed. I used ASA, PETG/PLA should also work. Layer height isn't…
Remix credit This is a remix of "OpenSourceEV DCFC + J1772 to NACS Adapter Holder for Rivian R2" (OCL v1.1) by Rob @OpenSourceEV: https://www.printables.com/model/1876474-opensourceev-dcfc-j1772-to-nacs-adapter-holder-for All credit for…
Skadis and screw wallmount for Dewalt DCF 803 heads
This model is a divider that fits inside the tstak box of dewalts DCF982NT impact driver. Each of the circular divisions is 75mm deep and has a diameter of 30mm, it can hold the inbus bits for this impact driver and could potentially fit…
Printable mount designed to hold the DeWalt DCF510 20v Brushless ratchet when paired with the 2AH battery
This Dewalt DCF894 Impact wrench mount for wall or under counter has proven to be an easy to mount and super convenient to use. Tested and fits Dewalt DCF894 with great precision. - Made to precision, this will hold your drill firmly. -…
TFA Clockwork "Funk-uhrwerk 60.3818.01" comes without any means to hang the clock to the wall. This part is a simple fix for that issue. Prints fast and works quite well.
The cheap DCF77 module you can get have bad solder pads for attaching pins and you will probably rip of the antenna cable while handling this module. That's why I created a thingy that keeps both in place and you can use it as module in…
This Dewalt DCF894 Impact wrench mount for wall or under counter has proven to be an easy to mount and super convenient to use. Tested and fits Dewalt DCF894 with great precision. - Made to precision, this will hold your drill firmly. -…
Hello! I'm an Electrician making inserts for my tools. Insert Information : I designed it for the 3 drawer Milwaukee Packout tool box but, it should fir the 2 drawer box as well. I will be adding a mini organizer for the small square…
