Oil Barrel Jonh Deere
Este barril es un excelente adorno para tu escritorio, es el logo de la empresa John Deere. Se imprime sin soportes.
- Downloads
- 231
- Likes
- 30
- Rating
- 5
229 models
Este barril es un excelente adorno para tu escritorio, es el logo de la empresa John Deere. Se imprime sin soportes.
Tractor parts to replace John Deere part R98630. Note that the part includes a reinforcement with a #10 SAE washer so it is recommended that the .3MF be used which will pause the print when the washer is to be inserted. This design is…
John Deere sculpture in two sizes. It is possible to print the letters and paste them into the big one No glue is needed, it is just put together. Tight connection. Print Settings 0.2 mm layer height 2 perimeters 15% cubic infill 5 Top…
John Deere 4020 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A single M1x6mm screw…
Dimensions: 60.5mm x 47mm For multiple colors: 0.00mm - 2.00mm (green) 2.20mm - 3.00mm (yellow)
I was missing a John Deere keychain, so I modeled one.
I recently bought a used JD tractor and wanted a key chain. I didn't like the options available and designed my own. I based the size off of the key chain that came with the key. Dimensions: 63mm x 48mm For multiple colors: 0.00mm -…
https://www.ar3dprints.com/ http://www.prusa3d.com/#a_aid=3090
K dispozici jsou 2 vykrajovátka na cukroví - s jelenem a bez jelena. Pokud chcete dělat cukroví jako na obrázku (linecké), udělejte jedno bez jelena, potřete ho marmeládou a přilepte k dílu s jelenem.
This is a button to help open the hood of a John Deere Compact tractor. Mine is a 2032R but it should work in all the others. It is pressure fit. You just push it in. So far it has held up well. I do recommend printing in ASA for long…
Spare gear for John Deere Peg Perego gearbox. Gear modify to bearing 628/8.
currently setup ignition power A = Constant Bat+ 12v B = Constant Bat- 0V C = Ignition switched 12V Printed in PETG for durability crimp blue sleeves fully otherwise you can't insert them
I wanted to print this wall art very large. Since my bamboo is only a maximum of 25cmx25cm, I divided the deer head into several parts. The interfaces are chosen so that they are as unnoticeable as possible. Due to the way the transitions…
Please be aware that some websites, eBay accounts, and Amazon accounts are selling this print illegal and without my permission or attribution. This file is free for you to use for personal use, but please don't try to profit from my work…
John Deere 3020 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A single M1x6mm screw…
connection bolt for Bruder "John Deere 1210E Forwarder with 4 trunks and grab" Verbindungsbolzen für den "John Deere 1210E Rückezug" der Firma Bruder Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0,2 Infill: 100%…
kann auf die morhaube eines john deeres mit 4 schrauben befestigt werden
Floor plugs for a 1025r John Deere. May fit other models. Fits the main floor holes only. You could trip it to fit other I suppose.
John Deere Coaster Designed in FreeCAD. Ender 3 v2, Cybridge PLA, 0.4mm nozzle, 0.2mm Layer height. Once the stl file is in the slicer I scaled down to 66%. Print in your preferred filament. Once printed you can paint to achieve whatever…
John Deere 530 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 8.75in (6.4mm x 222mm) rod used for rear axle 4mm rod used for steering wheel (Used an M4 Screw…
John Deere Cookie Cutter. Printed at 100% size but probably 125% is better. Print Settings Printer: Creality CR-10 Rafts: No Supports: No Resolution: 0.2 Infill: 25% Category: Kitchen & Dining
Bruder Front axle for John Deere 7930 If you like it, press like it ;-) After only the axis was broken, i designed it to be printed. Therefore you need not to buy the parts which are not broken, rims, tires and so on 🙂 Fits to the Bruder…
Remix, removed hook from back Print Settings Printer: Pinky Rafts: No Supports: Yes Resolution: 0,3 Infill: 25% Filament: PLA Ctech PLA white Category: Art Tools
This was fun to make in Inventor. It didn't take me too long to do it. I first looked on Thingiverse but I didn't like the ones people had made so I made my own. Hope you all like it. Print Settings Printer Brand: Creality Printer: Ender…
Slide on replacement throttle knob for a John Deere 425. Just support under the knobby part, let the inside part bridge, see picture for details.
For when the rubber on the gear stick handle degrades and breaks up, causing the original buttons to fall out. This was made for a JD 6930, but looks like they should fit other models including 6M and 6R series with the autoquad…
Print settings 100% infill 2 perimeters 0.05 first layer because of adhesion
My Son lost a Plastiv Screw for his John Deere ``Build your own Tractor´´ Set. So i build him a new one. I Printed in PC BLend from Prusa, but all MAterials will do it. Its for…
Super simple John Deere coin, nothing crazy
I was plowing the snow the other day and noticed that my boots were slipping off the pedals a little bit from all the ice and snow. So I thought, "Those pedals sure would be nice if they had better grip!" So here it is, a simple snap on…
ERTL makes a die cast model of this late 1950's crawler in two versions – with and without a dozer blade. They do not offer a version with the bucket loader. With a little determination and a few extra pieces of hardware, an ERTL model…
Print settings 100% infill 4 perimeters 0.05 first layer because of adhesion
Greetings . I am adding my model, a key ring for opening the hood of John Deere tractors, in several versions, with the sign of a deer on the top of the key ring head. Zdravím vás . Pridávam svoj model , kľúčenku na otváranie kapoty…
I created a double cup holder for John Deere and Massey Ferguson tractors and many others. A base is required to which the model will be screwed. Good luck! Print filament: PETG/ABS
PET-G 6 kontures 85% infill from 30mm to 45 mm 100% infill PET-G 6 Konturen 85% Füllung ab 30 mm bis 45 mm 100% Füllung
Cedule parking only 4x vrut 3mm x30
add a modifier and 100% infill around bolt hole and latch side 90 degree handle pic is for reference but does not print well functionally
Simplified version of hood release button. Besides removing the top part I adjusted dimensions to better fit my tractor and 3D printer. Button slides in and out with the inner metal rod (I added some grease spray as well to reduce…
A simple Cookie Cutter of a John Deere logo. Have fun with it.
John Deere two sided key chain, 3 color print. Designed to print black & yellow (construction and forestry) on one side and green and yellow (ag and turf) on the reverse side
just a decorative sign of your favorite tractor manufacturer i used Prusa PETG Jungle Green and Pineapple Yellow If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly appreciated. Happy Printing…
I printed the model from PETG or ABS. I recommend keeping the following parameters: Layer height 0.20mm, Walls 3 layers, 4 top and bottom layers, infill 20 % - cubic, nozzle 0.4 Supports not needed. Model som tlačil z PETG a ABS…
Modeled in 1:8 scale and designed to fit the Prusa XL bed. Additional cutting of some parts will be necessary to fit smaller print volumes. Most components assembled with 2mm or 4mm bolts, some glue may be required for some of the…
A keychain with the John Deere logo on it.
I printed the John Deere Tractor and Trailer from Thingiverse: https://www.thingiverse.com/thing:1534474 scaled at 150%. But some parts were not strong enough, so I remixed them to be stronger. Remixed roof, rooftop and trailer-body to be…
The button is made to be pushed into the hoot release hole and stay there so you don't need to go get extra tools to open the hood. It's still easy to remove the button. Print flat as show in the image. Up the wall count for more…
John Deere 4020 NFE (Narrow Front End) - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A…
Oil Filter Wrench John Deere Z335E. 15 facet x 72mm for a nice tight fit. 3/8" drive. Designed in FreeCAD. Ender 3 v2, Generic ABS, 0.4mm nozzle, 0.2mm Layer height.
John Deere 48 Front Loader - 1:8th Scale Made to fit the 3020 and 4020 tractors I have modeled. Uses M2 and M4 Screws. Indents indicate where holes need to be drilled out. Would love to see pictures of your makes!
This is a replacement part for a window handle on a tractor.
John Deere - Suitcase Weights with Bracket - 1:8 Scale Designed to fit 1:8th scale John Deere tractors. Uses M4 Screws
I'm posting it here in the odd chance it may this may be useful for somebody else… Printing instructions Printed in PETG with the default 0.2mm layer height settings. Two minor twists related to the two “hooks” on either side: They need…
This is a John Deere logo plaque you can hang on a wall, I added two ridged holes in the back for a screw or nail (no support material needed). I also added a version with rings on the corners that can help against warping.…
PRINT IN TPU - this needs to be flexible. timbar created the cover with strap for hydraulic AM102420 connector - https://www.thingiverse.com/thing:4801967 I printed at .12 layer height, 30mms with 25% gyroid infill and it took about…
Model of an old John Deere harvester
This tractor is not meant for your kids. This is only the first thing my boys broke on this tractor. Instead of buying a new part they'd break again anyway I created this in tinkercad. Print Settings Printer Brand: Creality Printer: Ender…
Replacement Part for a broken ERTL Tractor Tire. It slips right over!
A replacement seat-belt for the Bruder John Deere Gator, modeled in Onshape and printed after my 3 year old tried to put the literal square peg in the round(ish) hole. Printed at 0.15mm layer height and 40mm/s on the Neptune 2s.
To assist in leveling a riding lawn mower deck. Designed for use with the LA-series 48" deck based on the JD Owners Manual alternate leveling instructions, but should work with other makes/models. Files are .STEP and can be modified as…
John Deere hydraulic connector cover. Best printed in PETG or ABS, fits the original spring
John Deere 3020 NFE (Narrow Front End) - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A…
This is a replacement of the rear window handle
The fuel tank cap for my John Deere 185 was cracked and I needed a replacement. I made this and it fits great. The cap should fit tanks with threads that are close to 2.45" to 2.5". Print with PETG as it won't break down when in contact…
Caster bushing for John Deere Z335E. (not yet tested in place) Created in FreeCAD. Ender 3 v2, Generic PLA, 0.4mm nozzle, 0.2mm Layer height.
Convert a John Deere Perego ride on tractor to use Milwaukee M18 batteries. I have tested this with M18 High Output XC8.0 batteries. I believe it will also work with the 12.0 variant, but don't currently have those to test. This will run…
A recreation of the air vent for John Deere 2140. In image the original is to the left and my design is to the right. Print these parts in whatever plastic you have that is more accepting of heat. All parts can be printed easy with only…
This is a press fit replacement for a broken throttle lever on a John Deere 135 (and similar) that use a throttle lever and choke lever in the same unit. Bought the tractor used with it broken, so tore it apart and was able to design this…
it's a deere wall art that you can 3d print
Mount to put behind 4640 screen in John Deere tractors. Installed by unscrewing 4 screens in the back of screen and sandwiching mount between JD bracket and screen. Have printed in 6 outerwalls and 35% infill. Works great.
Print this with the holes on the build plate, using normal style supports and 25-50% gyroid infill. The supports should snap right off with minimal cleanup required. This is the same part I designed and was selling. JD M122280 585195…
John Deere Rear Wheel Weights - 1:8th Scale Uses M3 screws
This is a front wheel replacement for the original Sabo Mowit 500f/John Deere Tango E5. I found the original too expensive for a wheel that wears out to quickly because of non existing ball bearings. This design contains 2 ball bearings…
Always wanted an John Deere clock for my shop. Pretty Expensive to buy so i designed this one. the main clock face is sandwiched between a front and rear ring. The rear ring has depth to allow for a clock mechanism(available on Amazon)…
Prusa MK3s: Einstellung 0,2mm Quality ABS Infill 40% Boden/Rand/Deckel - 6 Schichten Adapter sitzt fest und hat kein Spiel. Ist mittlwerweile seit 2 Jahren im Einsatz. Daten: VA - Distanzscheibe Vorderachse 2x
Bližší informace o modelu na stránkách Lega nebo v aplikaci LEGO Builder. Zkompletováno z různých zdrojů na internetu, popřípadě navrženo ve FreeCadu.
This is my model of the John Deere 675 skid loader. There will be attachments coming soon.
John Deere Front Slab Weights - 1:8th Scale Designed to fit on 1:8th Scale John Deere tractors produced by Scale Models. Uses M2 Screws to attached to tractor. Holes will need to be drilled and tapped on tractor.
john deere combine and tractor topper
“When you have a hammer, everything looks like a nail” – Abraham Maslow's Law of the Instrument Phone holder accessory for the front end loader conversion of the ERTL die cast model – Turn that 1950's crawler loader into an integrated…
Imprimer avec une densité élevé / Print with a high density X107 / X127 / X167 / X147R / X167R X350 / X350R / X370 / X380 X584 / X590
The John Deere combine was maybe meant more as a model than toy. Well, it didn't hold up. Keep the fun going with some repair parts.
Suspension of left wheel was broke. So I designed a replacement and printed it. Kid happy, neighbor happy, me happy. Designed in TinkerCad, printed on my MK4 with Formfutura STYX PA6 (Nylon). The print was one of my hardest prints. Vacuum…
This is a large bucket for the John Deere 675 skid loader.
“When you have a hammer, everything looks like a nail” – Abraham Maslow's Law of the Instrument Pocket protector modeled after those classic white vinyl protectors – Turn that 1950's crawler loader into an integrated tool carrier!
Replacement part for John Deere mowers/tractors. Print in ASA as minimum. You can use my parametric to make your own: https://www.printables.com/model/1348321-parametric-flanged-bushing-sleeve
This 301a is made after my grandpa's tractor
Two worklight mounts. One for attachment to the grab handle on a 3038e and one to allow replacement of the original Hella worklight on a 1025R with some other type of worklight. The 3038e mount screw pockets were designed for use with 3mm…
Calidad: Altura de capa de 0.32 mm. Relleno: Densidad de relleno ajustable, de 20% a 40%. Material: Utilizar PLA. Velocidad: Impresión a velocidad variable, de 40 mm/s a 60 mm/s. Soportes: No son necesarios.
John Deere Upgrade: Making the Tractor Great Again! 🌽💨 Let's be honest: The original tractor model is incredible (easily the second-best model in my whole collection!). But every true farmer knows that a real tractor needs to look like a…
A replacement hydraulic valve lever for aftermarket excavator accessories. Recommend a hard but flexible material.
Resolução 0.2 Bico 0.6 Preenchimento 40%