Search results: delta

Sort order

1,054 models

P
Printablesteookie

Delta-P fan duct V2-R2 for MK3S(+) extruder

July 27 2022 house keeping note: Somehow, reviews and makes for the older version of this fan duct have been showing up on this page, and reviews and makes for this updated version were showing up on the old versions page as well. To…

Downloads
10,279
Likes
1,934
Rating
4.87
P
PrintablesTakehiko

Delta Band Saw Insert

This is a zero clearance insert for a Delta Rockwell 14" band saw. It was modelled on a 1950 model, but should fit a wide range of vintages. Fusion 360 model file is included if you need to tweak it.

Downloads
183
Likes
25
Rating
4.75
P
PrintablesStephen Massman

Delta 36-670 table saw miter slot slide

This fits my Delta 36-670 table saw and will work great for crosscut sleds or one off sleds. I printed it diagonally to fit on my large printer. I have included the gcode for the Elegoo Neptune 4 Plus.

Downloads
142
Likes
16
Rating
5
P
PrintablesRenakaiP

Latte Panda Alpha/Delta Case

Just a quick case design I made as the previous design that I liked wasn't exactly a perfect fit, so I wanted to design something a bit more forgiving in terms of tolerances. Two halves are joined by four M3 screws from the top with the…

Downloads
122
Likes
5
Rating
5
P
Printableshoco

Delta 14" Bandsaw 2" Dust Port

There are two different solutions in this set. An adapter that goes from the smaller sized port that is already on the bandsaw to a shop-vac. A drop-in replacement for the original dust port. Both of solutions accept two different sizes…

Downloads
47
Likes
7
Rating
0
P
PrintablesRunamuk13

RV Delta hand-held shower head holder

Made this to replace the holder for our Delta hand-held shower head in our Airstream trailer. This hand-held shower is found in many Airstream Bambi series and other smaller RV's

Downloads
1
Likes
0
Rating
0
P
PrintablesBuildX

#0017 [Remix] X2 Delta P Duct [V2R2.2] for the MK3S(+) [New Flow Splitter]

*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** Thanks to the awesome Delta P duct design by @teookie,…

Downloads
6,624
Likes
1,501
Rating
4.94
P
Printablesmkingery

Delta Stand v2 - 3 Way Adjustable Stand

Each half of the stand is 30mm wide to help promote stability underneath the laptop or tablet. There are 2 frame versions that are cross compatible with all v2 Feet and provide slightly different angle options. v2 is a Right Triangle…

Downloads
2,297
Likes
515
Rating
4.91
P
PrintablesBengialp Evren

MR (ANT) TENNA FROM DELTARUNE

MR (ANT) TENNA FROM DELTARUNE

Downloads
1,725
Likes
81
Rating
5
P
Printablessdaendi

Ergonomic Delta table

All parts are correctly oriented and can be printed with a layer height of 0.2 mm. You need 6 approx. 20x5mm feathers + 3 small rubber bands. The part description shows how many times the part must be printed. Update 100% 3D Printed: If…

Downloads
1,489
Likes
1,064
Rating
4.5
P

Lancia Delta HF Integrale Evoluzione 2 Kit Card (1:24 scale)

Summary This is a model of a Lancia Delta HF Integrale Evoluzione 2 in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhaust ;-) After printing, the model can be assembled with the help of…

Downloads
1,410
Likes
271
Rating
5
P
PrintablesOscarTbatt

Ralsei Deltarune Chapter 1

Model by the ever talented Vibapop! Go check em' out! https://sketchfab.com/VibaPop I've got a bunch more deltarune prints on the way, so stay tuned!

Downloads
1,293
Likes
107
Rating
5
P
PrintablesAndrey Orlov

Delta Desk Lamp

Настольная лампа Delta Description by the author. Игнасио Гарсия Настольная лампа Delta представляет собой художественное изображение равносторонних треугольников, расположенных концентрическим образом. За счет масштабирования и вращения…

Downloads
1,235
Likes
1,050
Rating
0
P
PrintablesRCNet

Delta-P fan duct V2-R2 with square nut.

A quick remix of only the duct from teookie's “Delta-P fan duct V2-R2 for MK3S(+) extruder” to include a slot for inserting an M3 square nut to provide for a more secure retention of the screw that goes through the lower right corner of…

Downloads
1,210
Likes
116
Rating
4.87
P
Printablesh3li0

delta · planter

delta · planter modern minimalist design with patterns that sits elevated on a drip plate\ dimensions in mm: 100m height version ~ x: 118 · y: 118 · z: 100 80m height version ~ x: 95 · y: 95 · z: 80 photos show printed in wood and matte…

Downloads
1,204
Likes
375
Rating
4.9

Sliding Wrist Rest v2, flat with no feet (Carpio / Delta Hub inspired)

v1 is with 6 feet to reduce friction; v2 is with 2 layers of PETG without foot. To me they both feel equally slippery on flat desk surfaces. Thx for @MarcoDiNoto_1234805 for giving me the inspiration to print PETG alone side TPU. They do…

Downloads
1,152
Likes
116
Rating
4.86
P
PrintablesRolohaun Design

MIN Micro Delta 3D Printer

Welcome to my happy mistake the MIN Micro Delta 3D printer. I set out to design a 120mm build area mini delta 3D printer and well mistakes were made. The printer frame ended up too small but turned out really cool. Specs: 70mm x 95mm…

Downloads
1,103
Likes
383
Rating
5
P
Printablesczargb

Delta PSU (black) Prusa MK3S Lack Enclosure parts

The Prusa MK3S is now shipping with an all new black power supply. This power supply has slightly different dimensions than the previous one. In order to relocate the power supply out of the LACK enclosure to the lower table we can no…

Downloads
1,098
Likes
88
Rating
4.77
P
PrintablesOscarTbatt

Kris deltarune (dark world)

Model by the ever talented Vibapop! Go check em' out! https://sketchfab.com/VibaPop I've got a one more Chapter 1 print left, and then I'll get started on Chapter 2!

Downloads
1,058
Likes
77
Rating
0
P
PrintablesLopatka

FLSUN Delta Spool Holder

This is a print that fits over the original metal spool holder and locks in place to allow it to hold thicker spools. This fits the FLSUN Delta printers. I had the opportunity to pick one of these printers up at a good price. I wanted to…

Downloads
971
Likes
52
Rating
4.5
P
Printablesteookie

Delta-P fan duct V2-R2 for BEAR extruder

This is version 2 (V2) of the Delta-P fan duct for BEAR. It has several updates compared to the original: Easier to print Better cooling Refined flow path CFD optimized Even cooling front to back and left to right Improved visibility of…

Downloads
952
Likes
131
Rating
4.96
P
PrintablesDarthMupet

Star Trek Delta's (badges)

Another practice session modeling with Fusion360 led me to consider drawing and modeling these objects, tracing them from designs found on the internet, collecting them took me more time than I expected and getting an idea of a standard…

Downloads
910
Likes
124
Rating
5
P
PrintablesMediaMan3D

Delta-P duct for MK3S(+)

Delta-P Duct: Improved internal airflow for better laminar flow across the nozzle tip lengthened the duct tips by 5mm to better cover the part being printed below the nozzle. lowered the duct base to get the airflow pointing below the…

Downloads
880
Likes
140
Rating
4.76

DELTA IV HEAVY

Updates 17/02/2024 Stand redesigned with two versions, AMS/MMU and Multi parts. Description The Delta IV Heavy model is a highly detailed 1:200 scale reproduction of the most powerful rocket of ULA "United Launch Alliance" which will end…

Downloads
873
Likes
256
Rating
5
P
PrintablesOscarTbatt

Jevil Deltarune

Model by the ever talented Vibapop! Go check em' out! https://sketchfab.com/VibaPop I've got a bunch more deltarune prints on the way, so stay tuned!

Downloads
845
Likes
84
Rating
4
P
PrintablesiNorman777

Star Trek - Voyager Delta Flyer Class Shuttlecraft

The Delta Flyer Commissioned in 2375 & built by the stranded crew of the Starship Voyager. Able to accommodate 3 crew onboard, with several formidable armaments. Model is not my own however I could not find any Delta Flyer models here so…

Downloads
807
Likes
92
Rating
0
P
PrintablesRolohaun Design

Delta Flyer 3D Printer

Welcome to the huge update to my delta 3D printer the Delta Flyer! LDO Kit Pre-Order!!! Other Approved Vendors Official Delta Flayer Manual Quick Start Guide 3D View for build assistance This is a much sleeker delta 3D printer that now…

Downloads
764
Likes
217
Rating
5
P
PrintablesUN3X

LATTEPANDA 3 DELTA Case

Compact case for LattePanda 3 DELTA Before inserting the LattePanda 3 into the case: break out the support-plates out of the plug slots Cover can be fixed with 4 x M3x10 screws LattePanda Board can be fixed with the 4 original screws (4 x…

Downloads
738
Likes
16
Rating
0
P
PrintablesOscarTbatt

Susie deltarune

Model by the ever talented Vibapop! Go check em' out! https://sketchfab.com/VibaPop I've got a bunch more deltarune prints on the way, so stay tuned!

Downloads
730
Likes
73
Rating
0
P
PrintablesYantr

RAVEN - 3D Printed Delta Wing Aircraft by Yantr

The RAVEN is a fully 3D-printed Delta Wing Aircraft designed to push the boundaries of performance and endurance. Engineered for maximum efficiency, the RAVEN introduces cutting-edge advancements, including an innovative internal wing…

Downloads
691
Likes
50
Rating
0
P
Printablesmgetz

Faucet Aerator Key for Pfister and Delta (21.5mm)

Fits 21.5mm faucet aerators. You can scale it up or down to fit any size of this aerator. Print it upside down with a Raft and supports, like the example in the photo, so the pins are printed last.

Downloads
666
Likes
38
Rating
4.83
P
PrintablesBurgessG

Delta Table Saw ZERO Clearance Throat Plate (v3)

Purchased a Delta table saw from my LHS and although the throat plate that comes standard works, it lets a LOT of dust and debris through. So, instead of plunking down big bucks for a replacement I simply made my own. And it worked!…

Downloads
538
Likes
84
Rating
0
P
Printablesataboo

Delta 36-725 table saw zero clearance insert

Update: the first version was a bit small and clearance between the two halves was too tight so I've uploaded a v2. May fit on other saws, but based on measuring the stock cover for a Delta 36-725 T2. Around 3-¾" x 15-½". 2 pieces to…

Downloads
524
Likes
59
Rating
5
P
PrintablesJzooor

Delta 22-540 Planer Dust Collection Shroud

My grandpa gave me this old Delta 22-540 planer. It had absolutely no chip/dust collection. So I modeled this up to attach to the chip deflector shroud thing and connect to a shop vac to collect the chips. I've included 2 models, one with…

Downloads
494
Likes
32
Rating
5
P
PrintablesSilvano

Speedline wheel + brake vent for RC 1/5 (Lancia Delta wheel)

The model is for RC car scale 1/5. It is a copy of the original Speedline Montecarlo with brake vent. There are two files for the brake vent: SINGLE SOLID: it is the model for the printer with one extruder (one color); DOUBLE SOLID: it is…

Downloads
480
Likes
38
Rating
5
P
PrintablesRolohaun Design

Delta Flyer LEGACY Delta 3D Printer

Latest design here!! THIS IS THE OLD LEGACY VERSION!!! I set out to design a 120mm build area mini delta 3D printer. Introducing the Delta Flyer the best delta in the quadrant! Specs: 115mm round x 115mm Build Area! Klipper Firmware…

Downloads
469
Likes
112
Rating
5
P
Printablesnyzomandias

Corsair Carbide Spec Delta Front Cover

When I upgraded my graphics card, I realised that my case's airflow was significantly inhibited by the plastic front cover which only had two small holes for air and I decided to design and print one for increased airflow. And after…

Downloads
417
Likes
12
Rating
5
P
PrintablesRaphael Schaaf

Nerf Delta Muzzle

Muzzle for Nerf Barrel Attachements Print instructions Prints without supports

Downloads
401
Likes
70
Rating
4.88

M4/AR15 Delta Ring Wrench

Having bought a airsoft M4 I found that my handguard and outer barrel were quite wobbly, to fix I needed just to tighten down my delta ring. But to do that you would need an armorers wrench which are not that easy to obtain where I live,…

Downloads
392
Likes
63
Rating
4.5
P
Printables3D_Gaming

DELTA 1.0(nerf scope)

The Delta 1.0 is a nerf scope that is designed to be printed in one part and work right off the printer. the Delta 1.0 has no electronics and is a purly physical scope, so no magnifacation.It slides right onto nerf rails but sometimes…

Downloads
386
Likes
32
Rating
4
P
PrintablesHowler117

Starfleet Delta Insignia

This is the delta insignia that is so famously known. I modeled it to have a hole on the inside that you can put a 15mm x 3mm magnet into. The gcode that I provided already has the necessary color changes in it to stop the printer to put…

Downloads
385
Likes
28
Rating
5
P
PrintablesFunkfinger

Deltarune Tenna Cosplay Pin and Buckle

These were thrown together in a very short time period to create a cosplay for a (at that time) 3 day old character, Tenna. The cosplay was a hit at Phoenix Fan Fusion 2025. Included are the STEP and Fusion files if you want to modify.…

Downloads
384
Likes
19
Rating
5
P
PrintablesAbyzma

Chibi Ralsei | DELTARUNE

I wanted a cute statue of light furred Ralsei, but I couldn't really find anything to my taste online, so I modelled this little guy. The peg for the stand was only sort of guessed in blender, but it fit neatly in my test print, so…

Downloads
366
Likes
29
Rating
5
P

Deltarune Keychain

It's the Deltarune from… well… Deltatune, in keychain form! Can pretty much be printed in two colors on any printer, just add a stop in the slicer at layer 14 for a .2mm layer height and switch out the filament.

Downloads
348
Likes
40
Rating
5
P
PrintablesShoshke

Delta Cooler - Ender 3 V2 dual 4010 blower cooler with ABL support

Introduction: The design was made to be aesthetically pleasing, offer improved part-cooling while also supporting a BL-Touch or CR-Touch ABL. It is a replacement for the stock cooler however will require an additional 4010 blower. NOTES:…

Downloads
344
Likes
72
Rating
5
P
PrintablesMacronot

Star Trek delta's

Layered print containing a magnet. The magnet I used was one I had on hand. 10.9mm dia by 4.9 height. Printed in PLA time for one badge was 18 minutes.

Downloads
328
Likes
68
Rating
4.5
P
PrintablesSquarehead 365

Roaring Knight - Deltarune figure

Created this model of the Roaring Knight from Deltarune , and just wanted to share it. A shame that Deltarune has so few 3D models—on any site, for that matter—so I hope it's a worthwhile contribution on my part. If all goes well, I plan…

Downloads
325
Likes
29
Rating
0
P
PrintablesMarkus Schmidt

Box für Schleifpads Deltaschleifer - Storage for Delta Sand Paper

Schleifpad Box für Deltaschleifer z.B. für den Worx-Deltaschwingschleifer. Eine einfache Aufbewahrungsbox für die Schleifpads von einem Delta Schwingschleifer. Innenmaße: 107mm x 27mm und 97mm hoch Wand- und Bodenstärke: 1,5mm Die Boxen…

Downloads
322
Likes
28
Rating
5
P
Printablestahsin3323

Flsun SR First Layer Test (D:255 mm) for Delta Printers

The Model Diameter is 255 mm Thickness : 0.2 mm Print Settings Printer Brand: Flsun Printer: Flsun Super Racer Rafts: No Supports: No Resolution: 0.2 Filament: Porima-ReCycle Re-Pla Gray Category: 3D Printing Tests

Downloads
321
Likes
11
Rating
5
P
PrintablesDusBus

Star Trek Delta Insignia Logo Decoration

Designed this for a friend, not much to say about it. Adjust the size to your liking and hit print. The sharp tips might need a (partial) brim or mouse ears depending on how good your bed adhesion is.

Downloads
316
Likes
40
Rating
5
P
Printables3alCubo

Delta First Layer Calibration (FLSUN V400)

The first layer contributes the most to having a successful print. Some problems come when you calibrate initials settings with a squish a paper, it's not enough. The visualization on the FLSUN Speeder Pad settings they do not give…

Downloads
302
Likes
25
Rating
5
P
PrintablesTechnikpinsel

Delta-P fan duct V2-R2 for MK3S(+) extruder with M3 inserts and New Flow Splitter with M3 inserts

Used the nice design of the V2 R2.2 duct (by teookie) combined with the new flow remix (by BuildX) and added M3 inserts. I also hid the V2 R2.2 logo.

Downloads
299
Likes
42
Rating
5
P
PrintablesOrbWeaver

Lancer Deltarune - The Face

I designed a 3d printable model of Lancer making his iconic face after joining your party in Deltarune. after realizing that there was nowhere you could download a 3d model of lancer making this specific face I took matters into my own…

Downloads
285
Likes
33
Rating
5
P
PrintableszAbso

Power Rangers SPD Delta Blasters

Print Settings Wall loops: 2 Layer Height: 0.2mm Infill: 3% Sparse infill pattern: Grid I used Gyroid infill on the car_hood parts to help with the area around the trigger Support: Tree Brim Type: Mouse ear I use an Outer Brim on the…

Downloads
282
Likes
30
Rating
0

Geberit Delta 30 dual flush buttons

Reinforced the spring parts to reduce wobble when pressing the buttons. Added a stop to prevent the buttons from swinging outward. There are some hard to print overhangs, but the area ends up being covered. Tune your printer for overhangs…

Downloads
281
Likes
25
Rating
5

MR (ant) TENNA | DELTA 13

You can use the template however you like, as long as you give me credit.

Downloads
277
Likes
32
Rating
4
P
PrintablesBillnis

Delta Miter Saw Dust Chute for Model 36-255L

Model 36-255L (may fit other models) 12” COMPOUND MITER SAW This saw is discontinued and this part can no longer be ordered. Dust collection is not good with this or any miter saw I have used. Without the Dust Shroud, it is virtually…

Downloads
276
Likes
28
Rating
5
P
Printablesnuked24

Deltapoint Pro Picatinny Mount

This is a mount for the Leupold Deltapoint Pro (and similar) pattern of micro optics. It's designed to use the standard M4 screws that ship with the optic, and heat set M4 inserts- specifically, McMaster 94180A351. The Picatinny section…

Downloads
267
Likes
13
Rating
0
P
PrintablesKrafťákSvK

Ralsei Deltarune - No AMS

Original model by VibaPop : https://sketchfab.com/VibaPop Great thanks to @OscarTbatt for preparing and sharing the model. Here comes the awaited remix, bringing ease of printing in multiple parts. The resulting mini stands at around…

Downloads
264
Likes
36
Rating
0
P
PrintablesnevtipnySkill

Arex delta / Beretta 92 / Arex delta 2 speedloader

Arex delta / Beretta 92 speedloader 9 mm. Printed in PETG, 3 perimeters, 20% infill. If you change scale to 105%, works with Arex delta 2. This is reuplod from Thingiverse. https://www.thingiverse.com/thing:5027053

Downloads
251
Likes
12
Rating
5
P
PrintablesTarz

Safety Switch Key for Wen, Ryobi, Delta and Other Power Tools

This is a on-off safety key for power tools such as drill presses. If your key end is similar, this key should work. I designed the key for my Wen drill press. The problem with the original key is that it sits flush and, if you are ham…

Downloads
250
Likes
12
Rating
0
P
PrintablesHugo

LattePanda 3 Delta Case

A simple case for a LattePanda 3 Delta. It provides access to all pin headers on the top side and access to ports and slots on the side. I printed the lid with supports on the base plate to keep the fan ring and the screw holes nice and…

Downloads
244
Likes
8
Rating
5
P
Printablesmkingery

Delta Stand - 3 Way Adjustable Stand

Note : There is nothing wrong with this print but I created a v2 which can be found here ! It primarily allows for a more secure foot connection without the locking pieces. This print was my attempt at creating a laptop stand that looked…

Downloads
244
Likes
46
Rating
5
P
Printablesemma_yeahhh

Mad Mew Mew / Pink Deltarune Figure

CREDITS TO @JOHN9DOE1 ON X THE EVERYTHING APP FOR THE MODEL! (I posed it but he made the model of the character) CREDITS TO DELTARUNE / TOBY FOX FOR THE GAME When you import the model into your printing software, it will most likely says…

Downloads
241
Likes
20
Rating
0
P
PrintablesNils Kal

Delta P fan duct for 5020 blower - MK3s+

Delta-P fan duct remix for a 5020 blower, compatible with the mk3s(+) You might need 2 longer m3 screws to hold the fan. Use .3mf for preconfigured settings

Downloads
240
Likes
46
Rating
5
P
Printablesreadysetawesome

Remixed "Delta-P fan duct for MK3S extruder" w/clearance for MK3S parts

I printed this in ASA at 100.5% scaling to allow for some shrinkage. using variable layer height I made changes to fix the misalignment of the part cooling fan and the duct/bracket that wraps around the heartbreak, above the hotend. In…

Downloads
237
Likes
32
Rating
1
P
PrintablesShmilCat

RC 1/8 Buggy Wheel - Lancia Delta Integrale Style

RC wheels for 1/8 Buggy (17mm hex) in a Lancia Delta Integrale Style Requires support on the build plate only Would not recommend PLA for this, printed well in PETG and ASA Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No…

Downloads
235
Likes
27
Rating
0
P
PrintablesRed Hat Jef

MK3 + Delta PSU Support Bracket

Support bracket for the MK3 with the new Delta PSU. This is used when removing the PSU to make an enclosure for printing things like ABS. (Power supplies don't appreciate the heat like ABS filament does!) Print instructions Suggested…

Downloads
235
Likes
11
Rating
4.67

Sliding Wrist Rest v1 with feet (Carpio / Delta Hub inspired)

v1 is with 6 feet to reduce friction; v2 is with 2 layers of PETG without foot. To me they both feel equally slippery on flat desk surfaces. I've used the original design for a while and think it could be even better if printed in TPU…

Downloads
234
Likes
22
Rating
0
P
PrintablesJohn

Shower knob for Delta faucet

Inside face of knob is tapered to let water drain out.

Downloads
233
Likes
7
Rating
4
P
PrintablesKane1912

DELTARUNE Kromer Coin

THAT’S RIGHT! NOW’S YOUR CHANCE TO BE A [[Big Shot]]! Glue pieces together when done printing.

Downloads
227
Likes
21
Rating
5
P
PrintablesZé Carvalho

Noelle deltarune Thorn Ring

A thornring for Noelle, can be scalled up at will. This needs tree supports for the spikes, Made with PLA

Downloads
226
Likes
11
Rating
5
P
PrintablesJohnF

Delta Bandsaw Insert

Plastic insert for a Delta 14" Bandsaw. The slot for the blade is on center, your blade may be slightly offset from center. If so you have the tools to figure out how to widen the slot :-) Print with the largest part on the print bed.

Downloads
222
Likes
12
Rating
0
P
PrintablesWhenInWome

Joy-Con grip for iPhone 15 Pro with Andar case (for Delta emulator etc.)

Designed this to hold two joy-con controllers in a vertical orientation to play emulated DS games on my iPhone 14 Pro with Andar leather case. I can try to release other phone sizes as requested but without being able to test them myself…

Downloads
222
Likes
40
Rating
4
P
PrintablesDavid Hero

Monoprice Delta Mini V2 Orcaslicer Profile

Monoprice Delta Mini V2 Orcaslicer Profile with build plate

Downloads
221
Likes
6
Rating
0

Deltarune Pendant

The Deltarune, turned into a pendant! SVG Source: https://svgur.com/s/9Hx

Downloads
218
Likes
19
Rating
0
P
Printablesmladendeni

M4/M16 delta ring

This is a M4 (M16, AR-15 or similar) delta ring for airsoft rifles (AEGs). The replica it was used on is a CYMA CM.513. It fits many other replicas with the same mounting style. It does not include the other ring that is attached to the…

Downloads
216
Likes
17
Rating
0
P
PrintablesBuildX

#0001 [Remix] Delta P for MK3S+ with LED

Thanks for the great design @teookie! After I saw the big difference in my cooling performance, I invested some time to add 2 LED features to illuminate the shadow area of the extruder; they are the smallest I was able to find @ 3mm 24V…

Downloads
212
Likes
79
Rating
5
P
PrintablesBrian

Toyota Land Cruiser 80 FJ80/FZJ80/LX450 Delta Shifter Console Double Cup Holder

Double cupholder for the Delta Shifter Console for the Land Cruiser 80 - FJ80/FZJ80/LX450/etc. Fits an energy drink/soda can, and a Hydroflask. Matches the body lines of the console. Bolts in using 3 ¼-20 bolts. No real great way to print…

Downloads
209
Likes
22
Rating
0
P
PrintablesUGhpbAo=

Remix - Delta-P V2 with rotated inlets

Remix of the V2 Delta-P duct rotating the inlets to even the airflow. For installation details detail see original model by teookie. STEP file included. Print in ABS/ASA with 4 perimeters, no supports needed.

Downloads
208
Likes
23
Rating
5
P
PrintablesZkaza

Geberit Spare Part - Aquaclean / Delta two button flush

Geberit Spare Part - Aquaclean / Delta two button flush From: https://www.thingiverse.com/thing:4567278

Downloads
208
Likes
16
Rating
5
P
Printablesgrisimal

Delta 36-725 T2 Throat Plate (Zero Clearance Insert)

Parametric model designed in OnShape to create a tight fitting zero clearance insert for my Delta 36-725 T2 table saw. I printed in PLA with 15% infill and 100% infill for the area in the blade pocket to provide added support after the…

Downloads
206
Likes
23
Rating
5
P
PrintablesCrocmagnon

Support mural Freebox Delta

Voici un support pour la Freebox Delta, à visser au mur. Comme il s'agissait d'un de mes premiers design 3D après longtemps, j'en ai écrit un article de blog (en anglais) :…

Downloads
203
Likes
17
Rating
0
P
PrintablesExadous PT

Delta Q - Capsule/Pod Holder

I did not create this model, it has been reuploaded from Thingiverse. Design made by: MBLX

Downloads
200
Likes
14
Rating
5
P
PrintablesAlex

BearEXXA Delta P V2-R2 for Dragon Hotend

Remix of two wonderful designs to allow for you to fully rigid mount a TriangleLab or Phaetus Dragon SF/HF and also use the Delta P V2-R2 fan duct on the BearEXXA. Any and all feedback is welcome! NOTE: You will need 4 M2.5x5 or 6mm SHCS…

Downloads
194
Likes
33
Rating
5
P
PrintablesI am Darth

Delta II - 1:100 - ULA

Here's my 1:100 scale Delta II 7000 series model. "Delta II was an expendable launch system, originally designed and built by McDonnell Douglas. Delta II was part of the Delta rocket family and entered service in 1989. Delta II vehicles…

Downloads
193
Likes
34
Rating
5
P
PrintablesDeltaa

Delta Industrial Strider Collapsing Rod Stock

The Strider Collapsing Rod Stock From DI, A wonderful budget friendly printed alternative to metal & polymer collapsing rod stocks. Fully Open Source Files SBL1/Protean/Worker Collapsing Rod Stock Full Metal Rod Construction Quick Deploy…

Downloads
192
Likes
56
Rating
5
P
PrintablesSpigi116
Downloads
188
Likes
43
Rating
0
P
PrintablesChrisfu

Mounting aids for orbital sander discs and delta sander sheets

I grew tired of constantly repositioning my 125mm sanding discs on my orbital sander to achieve proper centering. Uncentered discs result in imbalance, leading to increased tool vibration, making it challenging to achieve a smooth and…

Downloads
185
Likes
46
Rating
0
P
PrintablesSlimShader

Scalable Delta Printer

The aim of this design was to create a scalable 3d printing platform which uses what I consider to be the best available components. My requirements are: • Scalable from large (XXL 400mm+ XY, 300mm+Z) size to monstrous (XXXL 650mm+XY,…

Downloads
184
Likes
41
Rating
0
P
PrintablesSIVIS

Delta flying extruder Sherpa Mini

original design: https://github.com/Annex-Engineering/Sherpa_Mini-Extruder 2022\11\16 V2 Version It works well now and can print on Delta very fast I don’t know how to call this telescopic lanyard, it’s very cheap, it can lift the…

Downloads
183
Likes
23
Rating
5
P
Printablesきよさん

Bearing Guide 【REXON 10-inch band saw BS-10K2】【DELTA 28-195 10″ BANDSAW】

We made bearing guides for [REXON 10-inch band saw BS-10K2] and [DELTA 28-195 10″ BANDSAW]. There are two types of files: one that can be used as-is after printing and installing bearings, and one that can be used with 8mm stainless steel…

Downloads
180
Likes
38
Rating
0
P
PrintablesBiny

Capsule holder for Nescafe Dulce Gusto / Nespresso / DeltaQ

Different sizes capsule holder for coffe machines Don't need supports

Downloads
180
Likes
19
Rating
0
P
Printablesforcasted4421

roaring knight deltarune display figure

use petg filament and tree supports work the best if you are scaling the size down dont go past 80% or else it will break or 100% mess up use a 0.4mm nozzle for the best results you can use 0.2mm too it will take very long tho DELTARUNE…

Downloads
179
Likes
16
Rating
0
P
PrintablesRex Vokey

Corner pieces and feedpoint for field-deployed delta loop antenna

These provide means of keeping your delta loop antenna dimensions where they should be, while providing a nice, clean way to do so, while providing a way to connect it to your mast and tie the bottom corners to the ground. I used this…

Downloads
178
Likes
16
Rating
0
P
Printablesfuchsr

Delta-P fan duct V2-R2 with square nut - larger slot for nut

I liked the idea of RCNet's remix of teookie's original design but I found it impossible to squeeze the nut into its slot without some serious work with a rotary tool to enlarge it. This is a remix that moved the walls of the slot back a…

Downloads
178
Likes
18
Rating
5
P
PrintablesGsimon

Delta PMZ-24v240WDAL

Delta PMZ-24v240WDAL PSU for the Prusa i3 MK3s+ (The black version) You can use this STEP model as a base start for any modification/upgrade.

Downloads
177
Likes
16
Rating
5
P
Printablesjcorey

Delta 36-725T2 Table Saw Dial Gauge Holder

This is my holder for a dial indicator I picked up off Ali. It fits the T-shaped miter slot of the table saw very snuggly. Run it up and down the slot several times to shave a minute off and it's perfect. I've included the FreeCAD design…

Downloads
176
Likes
24
Rating
0
P
PrintablesColbyS

Extended Delta-P Fan Duct V2-R2

I found that the original fan duct did not provide enough air to the back of the part so I extended the left side of the duct to allow more air to the back of the print. Print settings are the same as the original part.

Downloads
174
Likes
27
Rating
5
P
PrintablesDigitex

freebox delta wall mount

ceci est un remix de " https://www.thingiverse.com/thing:4726590 " que j'ai découpé pour qu'il rentre sur le petit plateau de la Prusa mini merci @DLacour n'hesitez pas à aimer et poster vos makes this is a remix of "…

Downloads
174
Likes
11
Rating
5