1,283 models
I designed this water diffuser to avoid the holes created in the ground when watering, it allows to use higher flows. Its designed to be connected to a water quick connect. I printed it standing up with quick release connector facing…
Print approx. €3.89–€4.76 excl. taxPreliminary estimate for PETGSource material: PET
A simple but modern light diffuser. Looks best with colorful lights in it and works pretty great as a christmas lantern. Main tower - best to use vase mode and some clear filament Base - to be printed in full filament (Needs some glue to…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
Custom flash diffuser for pop-up flash of Nikon D7200. Since version 2.2 it will fit other cameras as well due to the sliding slot: you only need one M3 nut and one M3x8mm screw. I used this fantastic design for the flash mount, many…
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for PETGSource material: PET
Garden Tap Adapter: 3/4 Inch to M24 for Water Diffusers and Filters Product Description: Introducing the Garden Tap Adapter, designed to convert your 3/4 inch garden tap into a compatible connection for M24 water diffusers and filters.…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
Updates 14. April 2025: added the Information that it also fits on the Prusa XL xLCD. 18. November 2024 : removed the minimally longer diffusor file because the updatet fits well for PLA and PETG. Added the .stl files for the diffuser as…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
Water diffuser against water swirling when filling the aquarium To prevent the sand from swirling I used the sealing rubber from the original coupling for the garden hose, you can buy it cheaply in the garden store. I created this model…
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for one variant
LED diffuser grid for ws2812b strips (60 leds/meter) display. I would recommend to print it 0.2 layer height, print the 3 first layers with white PLA then change filament to black. Pictures are from 4 8x8 grid glued together for a 256…
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant
Originally taken from here - https://cults3d.com/de/modell-3d/gadget/aquarium-hose-adapter I use this to assist in water changes for aquariums. This adapter will prevent blowing your substrate/corals/plants around. Printed with supports…
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for PETGSource material: PET
Did you install the Govee Permanent Outdoor lights only to discover that you're being blinded through your window? Well, here's the fix for that. This model can completely black out individual lights, or work as a diffuser. It all depends…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
I wanted a V-slot cover that could act as a diffuser for the LEDs I installed on my Ender 3 Pro. The original design fit in the v slot but wouldn't slide easily over the LEDs. Recommend PETG due to heat from LEDs. 15% infill used with…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
This is a pop-up diffuser for DSLR cameras. I've tested it on my Nikon 3200 and 5300. It should work on others too. It mounts to the hot shoe bracket. Prints in two pieces. Having a well tuned first layer is key for a good diffuser. While…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Diffusor / Streulichtscheibe für eine Lupine Pico LED Helm- / Stirnlampe. Das Licht ergibt nicht mehr einen einzelnen Spot sondern wird sehr schön gestreut. Ich habe zwei Varianten gemacht: einmal mit zwei Lagen und einmal mit drei Lagen…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Tricky to print due need of some support. I was able to print with only a medium support in the middle
Print approx. €6.94–€8.48 excl. taxPreliminary estimate for PETGSource material: PET
This project started as a light diffuser for my phone and became a simple snowball shape light diffuser for winter time. Its easy to fit one LED candle inside it. Print a couple and you have soft lighting around the table or else where at…
Print approx. €3.95–€4.83 excl. taxPreliminary estimate for one variant
Diffuser for Lupine Blika headlamp. Works as well as protection during transportation or when mounted without use, e.g. while mountainbiking before sunset. The main reason for designing this product has been the very strong red light of…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
This is a bit of a precision print. One part should be printed in black PLA. Other part should be printed in transparent PLA. Be aware that minimal stringing is a factor when it comes to mounting / sliding the transparent part into the…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
Normally, the light from this torch is concentrated and quite focused. With this diffuser, it will become scattered and more like light from a lantern. The new Mini MagLite is with an installed LED. These new types of flashlights have two…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
Here is the XXL-version of the diffuser for the Klarus XT21X flashligt. :-) Handy when you need to turn all that concentrated lightbeam to the surroundings. Perfect on the kitchentable during that poweroutage, in the garage or on that…
Print approx. €8.33–€10.18 excl. taxPreliminary estimate for one variant
Here is the diffuser for the Klarus XT21X flashligt. Handy when you need to turna all that concentrated lightbeam to the surroundings. Perfect on the kitchentable during that poweroutage together with the Klarus Fottstand that you can…
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
Spare part for a trumpet-shaped ornamental fountain diffuser. Includes a threaded element as the fixing accessory. I needed it, so I redesigned it with some improvements. I love solving problems with 3D printing.
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
I made this for camping so I can easily hag it from a hook on my tent ceiling. It turns out its usefull in many situations when the flip is folded. Print settings Nozzle size ......................... 0.4 mm Layer height…
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for PETGSource material: PET
This miniature jet engine easily attaches to your car's AC vent. As it spins, it releases the fragrance of the elements you place inside its inner container. Update 11-May-24: Version V2 Added Important: Using a heat-resistant material is…
This is a redesigned version of my previous water diffuser. It's intended to prevent holes forming in the ground while watering, and it allows for higher water flow rates. The diffuser is designed to connect directly to a standard…
diffuse you LEDs! Be sure to read the manual to see how. STLs for reference only. Use openSCAD to customize to your setup. need a box? Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: Certain parts Resolution:…
Seatbelt Insert for your cars seat belt buckle to prevent the alarm from going off. Often while using the vehicle in the yard or off-road at slow speeds, one needs to be able to move around freely in the driver seat to see around the…
– Edit 01/08/2024: Added 10 PrusaXL versions (300mm x 300mm, 11.8 inches) of the panels, they can be found over on their own model page here. Based on the panels featured in this Youtube Video by 3D Printer Academy and not being able to…
This diffuser prints upside-down and does not require supports due to the 45 degree slope and angled diffusion holes. Plenty of perforations on all sides to let the water out quickly while not disturbing the bottom of the aquarium. Feet…
Matchstick Diffuser A diffuser for the Daylight/Rainbow on a Matchstick LEDs BOM Item Qty. M3 Heatset Insert 4 M3x6 BHCS 4 Printing Print one of each main_body_daylight_A.stl and main_body_daylight_B.stl if you have Daylight on a…
8x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version * I…
4010 Mount for Ender 3 v3 se
I couldn't find a model that would let me mount and hide my Disco-on-a-stick and Daylight-on-a-stick LED strips and hide the lights behind a tidy diffuser, so here it is. The provided Step files are designed for a Voron 2.4 350, but I've…
➡️ An add-on diffuser for the popular LED Strip Holder for Voron 2.4 here on Printables Sizes Only available for 300mm Voron v2.4 for now, since it's the only one I have to test fit. Please feel free to Remix it to fit more sizes. I'm…
Easy to print. Just turn on organic supports and it should be dandy. Diffuses the water being poured into the tank when topping it up. Hope you like it!
Just a simple print that allows you to pour water into your tanks without disturbing the aquascape. Added a larger version for bigger tanks. Fits over a tank rim up to 28mm wide.
Ore block - 100% infill; tree supports; grey PLA Diffuser - 100% infill; white PLA Light Holder - 60% infill; any color PLA; fuzzy setting to help adhere light strip to surface Base - 40% infill; tree supports; black PLA Once all of the…
Modulair Diffusion panels with LED lighting! disclaimer: Still in the process of figuring out product design, testing and documenting everything this will be a very early concept. currently I'm in version 8 or 9 (can't even remeber/ keep…
16x16 LED Matrix Frame No glue, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version…
This is a 3D model of a diffuser attachment designed for the Dyson Airwrap. Ideal for those looking to experiment with new accessories for their Airwrap, this model helps distribute air more evenly to enhance curling and drying…
My wife asked to design and print this thing for her, so I did. Printed with ABS to be heat resistant. Layer height - 0.2, infill - 5%, 2 walls. Add massive inside and outside brim. No supports needed. Print test ring first to test if it…
I came across a model designed by Mark Rhodes and initially thought I could easily replicate it myself. However, I soon discovered that creating effective acoustic diffusion involves more than randomly generating cubes and placing them on…
After upgrading my Layer Fans to 5015's, the stock 2010 Diffuser Fan looked comically tiny. This mount directs the airflow of a 4020 Fan to the Diffuser. Note: The Fan just slips-in… No screws. If tolerances make for a loose fit, a dab of…
Meet Scyphozoa belonging to the kingdom Animalia and phylum Cnidaria and give him a warm welcome in your Christmas decorations. A completely different Christmas decoration this year! Simply slide it over an existing LED of the Christmas…
This is a quick remix of Bambu Lab's Lithophane frame. The only changes made were: Remove the ‘Bambu Lab’ logo from the top of the frame Added locks for the diffuser plate so it doesn't slip out I've included a 3mf file. Supports are…
Fan shroud diffuser with better airflow, and compatible with Sand's Lightweight Fan Shroud. Like many of you, I experienced the shrieking death of the stock 2510 cooling fan on my Ender 3 V3 SE. I liked TheDude's fan shroud, but found it…
Is your 2150 fan dying and needs replaced? Is the cooling system for the hot end “inadequate” for you? Well, here's you're solution. It's designed around my other fan shroud , but made for this use case. I went through one prototype that…
I took the Voron enclosure part and made it longer so I could use it on other projects.
Remix of an awesome idea from Subtle3D. I've taken the same model and designed end caps, a right angle, as well as a few different lengths to fit in different configurations. STEP and Fusion files available for easy customizations. The…
Simply clip them on the effector, it will withstand accelerations without any glue or screws or wathever. I used gyroïd infill @10% without testing any other pattern or density. Filament is PLA White Matte from Grossiste3D, it gives a…
16x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector Optional socket-less version * I suggest gluing the…
Simple yet very effective diffuser system for LED strip lights. Base can be nailed or double sided taped, diffuser covers snap into place. All parts can be cut to proper length in your slicer for a perfectly custom fit every time. I…
This is a twisted air diffuser for a 120mm PC case fan. The air vent exits at a 45 degree angle. No support needed. Support If you'd like to support me for the 3D models I distribute for free, you can use my AliExpress affiliate link:…
Aquarium water change diffuser, Simple to use just put it on the side of your Aquarium and enjoy clear water!
32x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version *…
Clock diffusor for led Rings
You can buy these from me here! Consider donating to us if you like this model! This diffuser lamp shade allows you to easily use your flashlight to brighten up your office or bedroom. Currently available for the Emisar D4V2, D4K, D18,…
LED lights built in to the Ender 3 S1 Pro (and add-on for the regular S1) were making hot spots on the bed when shooting time-laspe and so need a bigger diffuser to soften the light. Print Settings Printer Brand: Creality Printer: Ender 3…
2024-06-01 : updated version with higher brim! !!! SCALING FOR HOSE DIAMETERS OTHER THAN 15mm NEEDED !!! use this formula: 100% scaling divided by 15mm. multiplicate the result by the outer diameter of your hose in milimeters. example:…
A light diffuser/holder for string or strip LEDs in the Lack Enclosure Print instructions Printing 2 per side will fit in between the enclosure legs. Model is pre-positioned. You will need 2 small wood screws per diffuser. Use 3…
Update: Adding a NEW V3 VERSION with a full length that runs along the entire bottom edge of the xLCD cover and guides the light perfectly along its entire length. Adding a NEW V2 VERSION that is shape improved and the diffusion part is…
Jealous of the diffused-looking light from the new Apex Neptune Sky? I am. Want to get that T5/halide look from your AI Prime? I do. I made this light hood for AI Prime HD to get rid of most of the “disco ball” effect that is common in…
You can buy these diffusers from me here! If you like our models, consider giving us a 1 time donation! Please see the assembly instructions photo! This is a flashlight diffuser that distributes the light radially and downward to maximize…
Users of the kinda cheap-ish Eastwood powder coating system know about the problem around uneven air distribution in the powder container. You often get clumps of powder out of the nozzle or no powder at all until you shake the bottle…
The original file isn't in the list provided so I decided to remix it to make it
Wasn't particularly thrilled with most of the LED diffuser channel corners out there, so decided to create my own. These were designed to be as close to an exact fit as the end-caps that come with the channel, and as minimalistic as…
This model will print without supports, it works well on my Python hose
Hose connector end with water diffuser, 3D printed in one piece from PETG filament. Second part is rubber ring seal remove from the original hose coupling or printed from flex filament Parametrically adjustable: number of intermediate…
Remixed from mapleleafmakers for the standard disco on a stick used in 250 and 300mm V2 and VT
Also, I later changed paper diffuser sheet to some layers from laptop screen diffusion, it seems to work a bit better.
This was based on the diffuser at https://www.thingiverse.com/thing:1903744. It has the same internal dimensions (10mm square grid, 9.2mm internal with 0.8mm walls between). I added added a 0.4mm layer to the top, a 0.4mm recess for the…
Recommend printing PETG with Top surface Hilbert, Bottom Monotonic and Sparse infill Lightning with density 98 for nice look. Needs supports.
Car Seat Belt Alarm Diffuser BMW
Turns a pickle jar into a filtering water diffuser for hookah or vaporizers. It attempts to split air bubbles up as much as possible to accomplish better diffusion than many other options I have seen. A gasket printed in TPU will likely…
Diffuser is only 3 layers to diffuse the light, not to dim it. for dimming use command M355 S1 P(1-to-255) printed in transparent black PETG
Tamiya C11 Rear Wing and Diffuser. It is modeled to be a closer representation of the real car with actual down force of 95 grams at 30mph. The top smaller airfoil needs to printed with supports on the underside and printed slow because…
I needed a very low profile diffuser for the Daylight on Matchstick LED pcb, so I made this design in a morning. Print settings filament: PETG white or clear layer height: 0.15 for translucency Post Processing Initial design has a bridge…
This is a handy dandy light diffuser which fits an OLight Baton II or Baton 3 flashlight. When in it's stored position, it also has the added advantage of putting some distance between the magnet on the bottom of your flashlight and coins…
Snaps on to the shade of IKEA Tertial lamp to soften the light, super useful on a desk so its not blinding you.
Water change diffuser for refilling your fish tank without stirring up stuff in the water.
A diffuser to smooth your Sony a6000 pop-up flash! Measured to fit your Sony camera flash, * might* fit in similar models Conscientious Topology design Precisely measured with sufficient clearance for a snug fit Alternative version of the…
I've made a diffuser to block the overspill of light from the Redsea ReefLED 90 lights. Added vent holes so the light can stay cool, just slides over the top. It is quite long, if needed it can be shortened, let me know and I'll shorten…
Hey Guys! This is a Led channel with a light diffuser, The led strip will slide into the channel, no need for glue! Then, the white diffuser will slide on top of the channel. I've made the files 200mm long and you can print multiple parts…
Added a printable light diffuser for the cellular lamp design.This is made to easily integrate light into the cellular Lamp Files are separate to make integration easy for people that have already printed the lamp. The designs are…
I shortened the shade hood for the AI Prime HD Light created by @fellowapeman_221869
Updates 2024-06-18 : Added an alternate design for the downstream diffuser section, suitable for a generic fan with a 200mm flow area and face mount. Provided mounting pattern works for Noctua NF-A20 and EBM-Papst K1G200-AD65-04 .…
Remixed original to create a box shaped diffuser of the correct size so you don't have to make your own or glue in all the small bits. Prints in vase (spiral) mode. 0.2mm. I used blue silk PLA which looks nice with a blue LED inside it.…
I needed simple and lightweight diffuser for macro photography. I was unable to find suitable diffuser for my Godox v860III flash so i created my own. I have 2 macro lenses: Laowa 100mm and Canon 100mm and this diffuser works well with…
XL (300mm x 300mm or 11.8 by 11.8 inches) Version of my Acoustic Sound Diffuser Panels . If you'd like, you can bring color to your panels if you have multiple extruders, by splitting the object in Parts, setting your Multi Material…
The advantage of this over the flat diffuser is it makes the stack thinner for fitting many types of speakers on the threaded posts. If you want 5.25 speakers with a pro kit, this also gives you the mount, and the extra diffuser in front…
I got really annoyed every time I looked at the exposed light bar on my Neptune 3 Pro, so I made this diffuser that fits over the light bar using the existing screws. It's a tight fit, so be careful when slotting the diffuser into the…
This model is compatible with the lego system.
A remix of the Matchstick Diffusers to fit on to the bed of a Voron V0 (120mm x 120mm). The main body of the diffuser is split into two so they fit on the V0 or similar size bed. For the rest of the BOM, please refer to the original…
30 degree angled Top side mount for Maple Leaf Makers Matchstick diffuser. Placed sideways in the Top hat extrusion of a V0.2 and lights up the area downwards. cables can be tugged away in the extrusions. Use the matchstick diffuser and…
RGB matrix case Diffuser (print in place with color change) Case stand Back frame to fit esp32 dev boards, mini bread boards, etc Printing Instructions Please use white filament for diffuser. The case & stand can be printed from any color…
A geometric wall panel that also works as a sound diffuser. Has 4 screw holes to put on a wall.
Creality Ender 3 S1 Light Diffuser The light bar offered for the Creality S1 is a wonderful upgrade but there is simply too much glare when sitting at the desk/work station. This simple light diffuser offers a few things: - No tools…
Since this model made by RezKom is cool and missing on Printables, I reupload it from thingiverse. I also suggest to use these compatible connectors made by @DynaMake here on Printables:…
This is a modular diffuser that you can make as long as you want! The diffuser piece is designed such that its interfaces match so you can print as many pieces as you need and you can then put them together into a single decorative piece.…
The part labeled 1-3 is intended for printing three pieces for the center of the bumper, parts 4-5 for 2 pieces, part 6L for the far left, and part 7R for the far right (see labeled diagram). The parts are designed to be mounted at a…
hook around the top in combination with VHB tap around the edges for a tight seal.
