STM32F072B Discovery MB1076 Case
Included in the attachments is the parametric Fusion 360 design and the label design
Print approx. €3.61–€4.41 excl. taxPreliminary estimate for one variant
- Downloads
- 30
- Likes
- 1
- Rating
- 0
235 models
Included in the attachments is the parametric Fusion 360 design and the label design
Print approx. €3.61–€4.41 excl. taxPreliminary estimate for one variant
Adapter to mount an Arrow dual-band antenna on a Discovery Drive azimuth/elevation rotor. The handle of the Arrow goes in the slot, and the base plate bolts to the Discovery Drive's rotor plate. I used a prototype Discovery Drive with…
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for one variant
Here are the modified files I used to print out the awesome Star Trek Discovery phaser that was beautifully designed by ajethridge . This has been sized to a nice fit--not too big but not too small. It is 22 cm from back to front. The…
OEM style Land Rover Discovery 1 & 2 Cup Holder I made this cup holder for my disco 1 manual transmission, it consists of three parts. The lower part can be printed in two pieces (lower 01 and lower 02) and glued together or printed as…
Remove the wheels as in the pictures (see picture 4 & 5) Space shuttle : Fixed with wall plug (see picture 8) and Double-Sided Tape for nose gear (see picture 6) Slide the front part (red axle) into the “shuttle hook nose gear” (see…
Here is a remix of the awesome Discovery communicator kit designed by mooslug . I love how the model is accurate so I wanted to make it as a static prop without electronics. I solidified the body and made the flip-up hinge mechanism…
Land Rover Discovery 2 window switch cover. There are two versions - with or without heating switch holes. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Supports: No Resolution: 0.2
Land Rover Discovery 2 horn button cover. Print instructions Printer Brand: Prusa Printer: i3 MK2.5 Brim: No Supports: No Resolution: 0.15 Filament: any ABS, ASA
This can be printed out and used as a replacement for the horn button in the steering wheel of the Land Rover Discovery 2. Use either PETG or ABS for best results. Choose a print orientation that will maximise the strength of the clips.
This is an insert / organizer for Terraforming Mars: Ares Expedition, along with the Discovery, Foundations, and Crisis expansions, in the larger Kickstarter expansion box (note: this does not fit in the retail box). It has no lid lift,…
This is a remix from the excellent and highly detailed model by Burning_Bridges : https://www.thingiverse.com/thing:3067279 The original obj file was not printable as-is. So, I did extensive repair to it to make it printable. I have also…
Land Rover Discovery 2 carling switch bracket. There are two version - with or without double-sided adhesive tape. For better fixation use double-sided adhesive tape and "DSBT spring". Frame is bonded by aceton using holes in the body.…
Discovery 2 - wheel hub and nuts cover for use with steel rims.
Trays for discovery cards (sleeved) and injury cards (sleeved and non sleeved) for Awaken Realm's ISS Vanguard boardgame. With my basic design skills, they help keep the cards nice and organized at top edge of the exploration book.…
Part numbers: DBC101690, AWR6711, DBC101680, AWR6712 --------------------------------------------------------------------------------------------------------------- On thingiverse is similiar model, but without locking hook. I had done…
This is a refined version of the model I'm actually using - this model has the shuttle sitting bit closer to the wall than you see in the picture. For strength, I recommend that you print in PETG 20% infill and in the orientation you plan…
This is a card holder for the boardgame "ISS Vanguard" to be placed on the left top side of the Planetopia book.
This is a Kit-Card for the USS-Discovery. Print with a layer height of 0.2mm, pop the parts out of the card and assemble your very own mini Discovery :) While other Star Trek cards result in models that are just a bunch of flat pieces…
This is the inner bracket for the switches in the center console with four window switches, two heated seat buttons, and a rear window lockout button. The outer trim panel has already been created by Hyta and can be found here:…
Here you go. The 32nd century badge that has it all. PADD, tricorder, communicator, personal transporter, etc. Revision April 28 2024 - Revised the whole model to look closer to the screen prop. Lengthened and given more depth. Was going…
I have just quickly added screw holes. I don't trust tape.
Here's my easy print version of the Disco badge style. I made the face flat instead of rounded for easier printing. Uses 6x2mm magnets. The file abbreviations are C=command (gold), S=science (silver), O=operations (copper), and M=medical…
Magnet clip on the back
This is a series of slide-together trays, to store and organize the Makedo Discover set of cardboard box construction tools. https://www.make.do/collections/all-products/products/a0126-discover The "SCRU"/"SCRU XL" drawers are…
Props show the emitter head and middle part, Discovery_Phaser_Mods_-_4_emitter_4, rotates. Did a quick part sketch using Prusa Slicer cylinders. This is why you have to open the 3mf file so the negative volumes will create the holes in…
Few hints for Land Rover Discovery II sunroof repair: I recommend silicone grease for rails parts. Use butyl tape as outer sunroof to car body seal. I used this tape also for sealing the four window nuts. Seal drain corner with quality,…
I designed it for my son, it's fully printable in various colors. Give it a like if you liked it, just knowing that makes me happy. Hope you like it. Enjoy it.
This is a model of the Discovery Space Shuttle optimized for Resin Printing. This is the 3d scan from the Smithsonian Air & Space Museum of which I give full credit. This model has very fine details that cant be printed with a normal FDM…
Public domain model of the Space Shuttle Discovery, from the collection of the National Air and Space Museum. Originally uploaded to the Smithsonian 3d digitization archive .
Space Shuttle wall mount I redesigned the model from JLevin to print it without support. Print settings: PLA / PETG (recommend) min. 20% infill To fix it on the wall, I used screws with a 5mm diameter. I also recommend some higher angle…
Included in the attachments is the parametric Fusion 360 design and the label design
settings quality 0.2 top/bottom layer 5 layer: line 3 infill: density 30% support: only Bild plate material: PETG or ASA or ABS build plate adhesion type: skirt
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Usually, the top panel is also broken, so to attach it to this part, screw it into the 3D-printed detail. I 3D printed it using HitPLA which is more temp resistant. If you don't have it use another material like PETG, ASA, or ABS. Don't…
To fit on the mini+ build plate you need to tilt it back and add supports. You shouldn't actually need any supports on the back, but PrusaSlicer likes to add a few random ones. Aside from that, just print and screw into the wall. It fits…
LR D3 Carling switches bracket is situated instead of the ashtray. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Supports: No Resolution: 0.2 Infill: 20 Filament: Any ASA
I bought some chunky lettering for the bonnet of my Discovery 1 and soon found that they were all for a flat panel, not the curved profile of my car. Here's my alternative set of letters that have a curved front and back. Printing Rotate…
I updated the handle to this excellent Star Trek Discovery Phaser, fixed the finger grooves so the curve is better on both the front and rear. I also filled in the holes to allow more glue to bond with the body of the phaser. IMHO, if you…
Overview The Analog Discovery 2 from Digilent is a handy tool for simple electronic experimentation offering a full digital + analog lab in your pocket. Digilent offers a BNC Adapter Board for use with more traditional test probes but is…
I included the .scad-file so you can modify or add upgrades yourself if you like. It is drawn from scratch, but inspired by some other designs from the web. Use some M3 screws with about 6 to 12mm length to secure the whole assembly.…
I didn't find LR part number for this, but this part should be same as BMW 17111719190 Replacement for water expansion tank holder (bracket?). Should be printed from high temperature resistant material, because of higher temperatures in…
I made a high-quality contour for the Land Rover Discovery. I hope this model will help someone pass the time.
StarTrek Discovery Section 31 badge Use a 2 by 10 mm diameter magnet on the back and clip it with another under shirt
PETG printed 0 infil with 1.2mm walls created a 100% print. Requires brim, small piece likes to pop off the build plate. no supports. when putting through thee latch, the square piece is heated up and squished to create a more secure hold.
All copyrights belong to the current creator. I only modified the last element to fit my car. Full credit and rights go to Robert Sedláček @RobertSedlace_421896. You still need to print the first and middle elements.…
"This is a collection of many different marble tracks compatible with Marbleworks Grand Prix marble set, for which getting replacement parts is difficult. Additionally there's a bunch of new designs cooked up to make more creative marble…
modifications: removed the part holding the Analog Discovery 2, so this case sits nicely in the box on its own. made the side with unprotected pins 3mm wider so they don't stick out and risk getting bent. modelled threads for M3x8 screws…
Because I have sleeping bed and foldable table in car, the original inner door handle was inaccessible and closing was problematic. So I created this handle which can be used also as handle for tailgate opening or closing. Installation is…
Edit: Added a file for the ladder that goes on the tail door. this is a 1:24 scale rc body for a land rover discovery 2. Modeled to fit the wheel base of Axial SCX24 C10 chassis. For printing this model was split down the middle…
I wanted to add oil pressure, ACE temperature, engine head temperature “watchdog” in to my car. I found device called UTCOMP-PRO with possibility to connect OLED (SSD1322). This holder fits (snug "click") very nicely. to dashboard, thanks…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A non-invasive and reversible mounting solution for a double DIN headunit in a Land Rover Discovery 2. This was designed with the mounting positions for an ATOTO A6PF in mind, it may not work with other headunits. To use this mount,…
Hello everyone, I have vectorised a technical drawing of the retired space shuttle and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 15 minutes! Please note the settings in…
Náhradní díl přetvořen podle originálu. tisknuto v PETG Spare part according to the original printed with PETG.
Window Regulator Roller Repair Simple roller that is a 1:1 physical copy of the roller used in the window regulator for Land Rover Discovery 1 and 2. Print this an alternative to buying a third party roller. Specifications Part name:…
Here's my try at the 'shark' phaser introduced in Discovery season 3 in the 32nd century Starfleet. Also used on Starfleet Academy. Big pieces require good supports and time. I tried to add some built-in support beams for the tall parts…
Terran Empire Badge from the new Stark Trek: Discovery Series. Sized to be approx 3.8 inches long. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: .01 or better Infill: 10% Category: 3D Printing
Space Transport Vehicles - Space Shuttle Discovery Ready to Launch 3D printable model.
Similar to original cup holders but a completely new design with extra features. I've removed the slot for a handle as this was never used by takeaway cups. Removed the insert to allow for larger cups up to about 80mm diameter TPU spokes…
StarTrek Discovery Engineering badge Use a 2 by 10 mm diameter magnet on the back and clip it with another under shirt
⚠ This is NOT the entire model! This is a demo/test version. 🚀 This file is designed for those who want to try Craycle airplane kits before purchasing. Note: Download the text file to reach all items! 📦 Contents of this package: ✅ Craycle…
Towbar plug for Land Rover Discovery 3 (Discovery 4) with two spring size. Print instructions Printer Brand: Prusa Printer: i3 MK2.5 Brim: No Supports: No Resolution: 0.2 Infill: 20% Filament: ABS or ASA
The windscreen service man lost nuts, plugs and crack hooks. So i remodelled missing components of the cowl (PN: JAK000010PMA ). Plug - product number ECZ100000 Plug can be printed from PETG on textured sheet with small supports on. PETG…
Battery Cap Dust Cover. This is specifically for the VELOTRIC Discovery 2 e-bike battery compartment to keep dirt and du
Check out my Amazon Page to see what kind of gear I use to make these models! "Imagine a microscopic web that spans the entire cosmos. An intergalactic ecosystem. An infinite number of roads leading everywhere." – Capt. Gabriel Lorca The…
StarTrek Discovery Intel badge Use a 2 by 10 mm diameter magnet on the back and clip it with another under shirt
Replacement of Land Rover Discovery 2 - 3rd row seat handle
Land Rover Discovery 3 8" Tablet Holder. Print instructions Printer Brand: Prusa Printer: i3 MK2.5 Brim: Doesn't Matter Supports: No Resolution: 0.2 Filament: Any ABS or ASA Any Notes: I recommended brims for parts of ball head and springs.
4x are required per vehicle, 2x per sunroof. A 0.2mm nozzle is required to print due to the tolerances required. I printed this in PLA and have not had an issue with it, ABS/Nylon/PETG may also be acceptable. Due to the rails being…
Die U.S.S. Discovery aus der gleichnamiegen Star trek Serie Wichtig beim einladen der Datein im slicer Filamente Bauanleitung Untertasse obere und mittlere section Brücke Untere sektion Deflektor und Hanger Bauch Gondeln 2 X (gespiegelt)…
Land Rover Discovery 3 3rd row seats lever cover. Print instructions Printer Brand: Prusa Printer: i3 MK2.5 Filament: Any ABS
This is a simple organizer for Corps of Discovery: Ultimate Edition from Off the Page Games. I found the supplied plastic baggies for each expansion cumbersome to use, as it is tricky to get the tokens to lie flat enough in the bag when…
This is a Re-mix of a 3mf file. First part is the emitter. take the emitter pin and fit is into the emitter allowing is to be able to turn freely. then take the emitter washer and fit it over the protruding end of the emitter pin lightly…
This is an insert for Terraforming Mars: Ares Expedition. It can hold a base game and two expansions (Discovery, Foundations) and 2 packs of promo cards. This insert will not fit Crisis Expansion. I don't have it yet and I think the box…
From Smithsonian Museum ( Orbiter, Space Shuttle, OV-103, Discovery | Smithsonian Institution ). Uploaded to printables to shar this awesome model.
StarTrek Discovery Medical badge Use a 2 by 10 mm diameter magnet on the back and clip it with another under shirt
Tension and force recovery loop for the GT2 belt of the Y carriage of the Discovery 200 and the Dagoma Discoeasy 200. To be used preferably with the carriage modifications available here: http://www.thingiverse.com/thing:1854220 The…
A protective guard that fits over the side repeater of a Land Rover Discovery 1. I have side repeaters with part number “PRC9916” lenses and these are shown in my photo. You will need supports to the build plate that will be easy to…
Držák nápojů na Land Rover Discovery 2 bez držáku na mobil. Upravené v Blenderu.
Badge worn by members of Section 31 as first seen in the first Season of Star Trek: Discovery. Included all the files for easy printing. I recommend using 6mm x 2mm round magnets. Filaments used Bambu Labs - Basic Silver, Black, Bronze…
Webasto multicontrol holder is situated instead of the ashtray. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Supports: No Resolution: 0.2 Infill: 20 Filament: Prusament ASA
Land Rover Discovery 3 armrest cap. Print instructions Printer Brand: Prusa Printer: i3 MK2.5 Brim: No Supports: No Resolution: 0.15 Infill: 20 Filament: Any ABS or ASA Black
A wall art 3D, but quite flat Discovery model made out of 6 pieces. Its made to be printed in 6 parts witch should then fit into each other, but meant to be glued together and glued or taped to a wall, preferably on a black or gray…
The model is made of multiple parts so it can be printed from different color filaments. The main body of the emblem is a single piece to give it more rigidity. It also includes a groove at the back side of the dagger's handle to mount it…
nice space shuttle
StarTrek Discovery Science badge Use a 2 by 10 mm diameter magnet on the back and clip it with another under shirt
Some another clutch tips: TD5POWERSLAVE is really good for long travels. Pedal is much softer. On some LH cars is clutch pressure sensor on the right side. It is possible to mount this sensor directly to unused hole inside of a main…
Our daughter is going through the phase where she likes to give all her toys to our (heavy chewer) dogs. As such, most chewable toys aren't long for this world if they're out of our sight for more than few minutes. Rather than letting the…
The Bracket: (Also see notes for V2) A sturdy mount for a 7" lamp with the mounting points and shape to fit the Discovery 1. There's several design elements to reduce support but it's unavoidable on the roof of the round cavity and around…
A cover panel for the window and heated-seat switches in a Land Rover Discovery 1. The original part has prongs that press into the supporting plate and these are usually easily broken. I've designed my panel to print without support and…
Caution: You have to remove parts of the original cup holder. this conversion is irreversible my own cupholder distroy itself by every use, so i designed a storrage box. You have to sanding the clip to a flat surface for a smoother use.
Designed for a Discovery 4 running 18" steel wheels from a new model Defender. These engage into the hub itself rather than the bore of the wheel. They tap in place easily. Designed as an alternative for the OEM hubcaps which lock onto…
Organize the game pieces to your Monopoly Discover game. The print in the photo is only 18mm tall. I increased the height of the tray to 25mm in the uploaded model since my tray wasn't quite tall enough.
This panel will allow you to wire power for accessories than need full time power. It is modeled to hold a battery tender usb adapter. Should fit Land Rover Discovery 2 years 1999 2000 2001 2002 2003 and 2004. It is printed in PETG to…
Here's the Terran Empire Badge from Star Trek Discovery. Uses 6x2mm magnets (x12). Display stand included. Filaments used: Bambu Labs - Basic Silver, Black, Bronze, Red and White.
Has your child ripped off the handle to the 3rd row jump seat in an amazing feat of strength and then immediately lost it? Do you not want to pay $60 to replace it? Then you're in luck. Here's a set of matching handles used to fold the…
Snake Discovery baby snake hides for baby snakes to hide under and you can make it bigger for adult snakes. If you download it and like it give it a rating in the comments😊
Replacement mounting standoffs for a Land Rover Discovery 2's “A” pillar. To use this part, you need to cleanup the mounting surface of the previous tab by filing down what remains of the original tab and its supporting fins. Then affix…
12x are required per vehicle, 6x per sunroof. A 0.2mm nozzle is required to print due to the tolerances required. I printed this in PETG and have not had an issue with it, ABS/Nylon/PLA may also be acceptable. Due to the rails being…