585 models
Please click if you appreciate my work :) Balance, aggression, and classic M spirit. This 3D printable wall-mounted model of the BMW M3 E46 Coupe captures the iconic lines of one of the most beloved generations of the M3. With its wide…
Print approx. €12.06–€14.74 excl. taxPreliminary estimate for one variant
Remixed keychain case for the Hormann HSE4 remote control without screws. top lid is wit 2 or 4 buttons printed from PET-G or ASA
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
Please click if you appreciate my work :) The iconic front of the BMW M3 E46 – now reimagined as a sleek and functional phone stand! This model was designed specifically for 3D printing, capturing the signature lines of this automotive…
Print approx. €14.36–€17.56 excl. taxPreliminary estimate for one variant
DIY Motor für Federwiegen - einfach - sicher (entkoppelt) - günstig - OpenSource - Firmwareupdate geplant (Timer-Funktion, SilentMode, etc) - Servo-Version geplant Print instructions 1. Druckteile Motorhalter: Prusament PLA, 0.2mm, 20%…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
BMW E46 Center console bin with retractable charger. Extra things you need: Sandpaper/paint if you want to make it need. Retractable unit from a retractable 12v car charger from Aliexpress.…
Print approx. €35.40–€43.26 excl. taxPreliminary estimate for PETGSource material: PET
My first try with the iPad. The e46touring.stl is scaled to 120% in x and y. Didn't try that version, share please if you printed one ! :) Hope you enjoy! Print instructions check the gcode
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
This is a set of two rails for the Play-Doh Mini Fun Factory (E4920). Printing instructions Choose the style you want to print. Print the .stl file as-oriented. You shouldn't need any brim or supports. Operating instructions Use as with…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
A grip for the Fujifilm X-E4 that provides access to the battery and SD card without removing the grip. You can use a standard ¼-20 camera accessory screw to attach it via the tripod mount screw. Thanks to the maker of the original model…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
This is a variable height fridge door schelve adapter that I designed for my Siemens KG49E4ICA fridge, but I guess this can be used with other Siemens fridges as well. I designed this because the predefined schelve mount positions were…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
Der Puffer wird in 2 Teilen gedruckt. Es ist zu empfehlen die “Front” mit einer möglichst hohen Auflösung (geringe Layerhöhe) zu drucken, damit alle Details erhalten bleiben. Für den “Stiel” sind leichte Supports nötig, ansonsten…
Print approx. €0.03–€0.04 excl. taxPreliminary estimate for one variant
Hero Me Gen7.4 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across 3D printers, hot ends, extruders, ABLs, and other components. The Hero Me Gen7 is all about choice and personal…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
BMW Schlüsselanhänger mit E30, E36, E46, E90, E34, E91
Taking inspiration from pictures of commercially available phone mounts for the e46, I created this clip in order to rigidly attach my magsafe charger without clipping it to the vents. The clip mounts on the stud next to the radio,…
For the best results use a fine nozzle with a color change at 2mm. Use TPU if you don't want to scratch your interior.
BMW E46 Coupe. Easy to print . Of course you can scale it the size you want. Easy to print for up to 100cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided tape and stick…
Original OEM number 31311139453. Thank you for likes and downloads!!!!
This fine case to hold up to 4 medical cannabis joints so you can use my medicine on the go. Made with portability and pocketabilty in mind, it's a small as possible exterior while still holding (4) cigarette style cannabis rolls. Note:…
https://www.buymeacoffee.com/adamca.lab Check the profile to download the full set. Subscribe to not miss out the next one!
Cut off the remains of the rubber part on your windshield cowl and attach these printed ones. OEM PART: 51718208483 Mirror the end part to use it on the other side. Print multiple mid parts to cover the entire length. Printed from…
If you enjoy my content by me a coffee. Thank you for support beforehand :) https://buymeacoffee.com/MRinlandcost Commercial License If you would like to print and sell my work in link below you can find my Patreon account. IF you have…
This is a remixed version of the original thing posted here on Thingiverse, which is a shift boot bracket for the BMW E46 3 Series. It has better strength as with the added fillets and the clips are thickened as well as enlarged for…
Join discord community: https://discord.com/invite/prjUvjmGpZ Join forum: https://discourse.source-robotics.com Faze4 is a small fully 3D printable Open source 6-axis robotic arm. It is functionally and esthetically similar to robotic…
Ashtray slider BMW E46 for bmw
The filament reel guide designed for Elegoo Neptune 4/4pro printer to guide filament from dry box to printer head smoothly. the reel should be duplicated as 2 not support needed while printing you need extra 1 M5*15 and 2 M3*20 screws to…
Alternative solution for BMW E46 Double Din AC Relocation Bezel. After a Double Din radio replacement you have to move the AC unit on the lower frame but the unit doesn't fit that well. This is a simple solution that uses your original…
classic car from nfs mw if you like it dont forget share your make and click like, i'll be glad if you take a look at my others projects
I wanted the “stock look” and the mounting schemes provided by the manufacturer of the aftermarket speaker did not fit the tri-lobe stock mounting scheme and I did not want to drill permanent holes in my door. This was designed for the…
DONATE: https://paypal.me/JuanCMedina21?locale.x=en\_US Use customs support (see picture for support placement) Recommend to print with 0.24 Layer height and lower speed for overhangs to avoid using supports. Printed with TPU 1999-2001…
Create a simple key ring for your car or make a gift for a friend Write a comment about which car you would like as a keychain Original model: https://www.thingiverse.com/thing:4720259
This is a blaster from the new Star Wars movies with Finn and Poe Dameron. They both used a new Rebel-Blaster like this. It was designed by me in Onshape and has many separate parts. The base part is available as one part or as a splitted…
The model is scaled very large, you will need to scale it down in your slicer. You should also use the “select face to align to build plate tool” to make the model sit properly on the build plate. The model consists of multiple parts that…
We did 6 different version to get it in the angle that it faces the driver. We had a tight fit so it did not need any mounting to the dash, but maybe some glue or other adhesive wouldn't hurt. Printed flat down on the surface, with ABS+…
It's a piece of work that combines a filament guide and the original filament detector stand. You’ll need to add two piece of support on two sides for the PTFE holder. A 608 bearing is needed. And just add 2 short piece of PTFE tube…
Hifiman HE400SE hexagonal grills, heavily inspired by the Custom Cans Super Grills . Modeled from scratch with a less dense hex pattern, purely based on personal preference. I would recommend printing them face down, they should easily…
This is a simple wall bracket for the TP-Link Deco M4 / AC1200 Mesh APs. Very simple to print, mountable with 2 screws. Just plug the AP in the bracket, no additional screws, glue or ribbons. It has a open bottom for air circulation and…
It's a piece of work that combines a filament guide and the original filament detector stand. I've tried PETG and PLA+, both work well. Print it with its back downwards and v4.1: add support for the hole which holds the PTFE tube. v4.2:…
Relive the excitement of tuner culture with this 3D printable STL model of the BMW M3 E46 (Most Wanted Edition). This iconic tuner car model is perfect for car enthusiasts and Need for Speed fans looking to display a legendary street…
Cupholders for e46 with space for usb charger. Small holes on sides are for ambient lights smd led can be inserted. Perfectly fits Koch 500ml bottle. Version 1.0. If u use it please tag me at IG: tomas_lukacs thanks. NOT FOR COMERCIAL USE.
This is a remix based on a hot shoe thumb grip for the Fujifilm X-A7. Following changes have been made: adapted to the Fujifilm X-E4 resized the part that slides into the hot shoe for a snug fit shortened the grip length
Remix of "Hormann HSE2-868-BS Repair" to fit a Hormann HSE4BS remote. Print Settings Printer Brand: Creality Printer: Ender 3 Supports: Yes Resolution: 0,2 Infill: all perimeters Filament: eryone petg transparent Category: Replacement Parts
Print a cheap replacement for OEM E46 sun visor clips. I recommend printing at 100% infill to prevent splitting at layers when installed. I had good success with a 98A TPU filament at 100% infill with supports on. Just give extra support…
Hello there! I was looking for a plug and play speaker replacement for my BMW E46 Compact (CAUTION! This model has bigger front door speakers than all other E46 - this adapter is only fitting for Compact!) and wanted better sound quality…
There is not a way to disable the passenger seatbelt alarm. Pluging this in lets you “turn off” the alarm. This should not be used if a person is in the seat. I've included a few variations of the buckle. Beveled Pyramids Grids Spiky
BMW E46 M3 for your keychain. I like to print it in TPU.
Ein Gehäuse für den Hoermann HSE4 Handsender.
Printed in PETG with max amount of walls 0.4 nozzle and 0.2 layer
BMW E46 Sunglasess box delete
Mine got lost, so I decided to make one! Print in PETG or other heat resistant filament. BMW (E46 3 Series (not M3), E83 X3) Battery Positive Terminal Base B + - Cover Cap (61138385158) Category: Automotive
A remix of Bowden Guide with 360° Print-in-Place Joint by Dennis Bauer that uses a GE4C spherical bearing BOM: As per original 1 x GE4C Spherical Bearing ( not an affiliate link) Print Settings As per original Place the GE4C spherical…
The BMW E46 , produced from 1998 to 2006 , is widely regarded as one of the most iconic models in the BMW 3 Series lineup. Admired for its perfect blend of performance, luxury, and precision engineering, the E46 became a favorite among…
A classic BMW M3 model, well known to Need for Speed fans. I really enjoyed modeling it, and I hope you like it too. Note: I recommend keeping the print settings at standard.
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece.
These speaker adapters were designed during my E46 convertible sound upgrade. My E46 is a Euro spec convertible without Hi-Fi nor HK options. This means: Sound amplification is done directly by the build-in radio (CD53 manufactured by…
Speaker cover for your e46 compact The .3mf version has the m logo included I recommend printing in PETG or ABS/ASA for better temperature resistance I printed it in Prusament Galaxy Glack PETG Enjoy
1/4 inch SAE 45 degree male plug for capping refrigerant hoses and other fittings Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 20% Filament: Overture PETG any…
Soporte de pared para los modelos Deco de la serie E/M 4 , fácil impresión sin soportes. 3 modelos distintos, para pared plana y esquinas Material: PLA/ PLA+ Altura de capa: no importa, yo los he hecho a 0.24mm Soportes: no Para su…
Very simple cup holder for BMW 3 E46 For 70mm bottles Layer height: 0.20mm Infill: 20-25% Material: PLA, PLA HS, PETG
A common issue on the BMW E46 is the cracking of old clips that secure the exterior rain drip rail/molding as with heat and age they become brittle. Unfortunately, BMW does not sell these clips on their own and you would have to purchase…
Modifier (bmw e46 grid): Top and Bottom layers: 0 Perimetrs: 1 Infil: 58% Infill pattern: Grid Colors: 0-2.2 - Black 2.2 - 2.4 - Orange(optional) / black 2.4 - 3.0 - Color of your choice (color of car) 3.0 - White
Do NOT print it in PLA, it will deform/melt. Printed with supports.
Case for a Fysetc E4 Onstep telescope controller. I only need 2 motors, but include the model so you can add up to 4 I printed using a 0.5mm nozzle, 0.3mm layer height using PLA+. I recommend no infill on walls and 3-4 layers top & bottom.
Service Tools for Hopetech Brakes Print in ASA / ABS or PETG #Bikeregards
Replacement grill for the Hifiman HE400se. Planar magnetic headphones such as this one are extremely sensitive to anything interfering at the backs of the drivers. The stock grill on this headphone is a very obstructing grill with a…
Print with more wall layers or higher infill to allow to better screw in.
Print these to fix the broken boot handle on your BMW. Theyre designed so they squeeze in the holes, creating some tension to be able to screw the handle to the car. The “center” ones are for the 2 center bolts, the “side” ones for the…
E46 & E36 brake line holder. The brake line snaps in place, and the plug holds the lid snugly to the body. I printed it in PETG-CF & 0.16mm
Print settings: Step: 0.2 Shell: 2 Infill: 100% Supports: Yes Filament: ASA (Black)
Chube is the greatest and latest hotend in the 3d printing market, featuring a staggering 42mm of meltzone! Chubes packaging doesn't just help create a massive meltzone; it also has a lot of rigidity thanks to the shroud design. These…
Detailed wallart of the famous BMW E46 Compact 325ti, Easy to print . Of course you can scale it the size you want. Easy to print for up to 80cm length, just cut it in some parts with the slicer. I recomend a strength of about 2-4mm. Add…
It's a USB holder for BMW e46. Original BMW part : 307090900 Materials : PLA / ABS Nozzle : 200°C Bed : 60°C
Isofix cover for BMW E46 I was missing one of the isofix covers so I modeled and printed this one. It's not a perfect copy since I added a bit of thickness in some parts to make it stronger. You can see in one of the images the…
Made this few years back. Still intact till today. Drop a comment for feedbacks Printed in ASA 100% fill. ABS or others Enable "Detect Thin Wall"
Gaugepod for 52mm gauges. I have only printed a testpiece of it, as i changed my setup to remove my single gauge when going to a stand alone, but my phone mount (pictured in my car) is made from the same model, so the overall fit in the…
I reccomend that you print this out of PETG and also salvage and stick the original dust protective mesh onto the back of this one to protect your headphones driver.
This 3D model is an adapter housing designed for the board of the bitShake SmartMeterReader availible on Amazon https://www.amazon.de/dp/B0CCMXSPVX , now integrated with Home Assistant using pre-flashed Tasmota firmware for enhanced…
Original cover was warped, so i made a new one. v3 - fixed incorrect location of the hole for screw. v2 - after printing, noticed small reinforcements are no necessery and make cover warp. after removing them everything looks ok.
For this Remix you can follow the Assembly instructions of the Original Design. This set will only replace 1:1 the parts from the original with the ones from here. The Center Carrier of this set provides an additional advantage over the…
This custom-designed replacement for the BMW E46 ashtray and storage insert solves the issue of the always-on 12V outlet. Normally the cigarette lighter/12V outlet remains powered even when the ignition is off. This insert includes a…
Since my cap was broken i remodelled the original part. There are two versions as the original part has a lash to secure the cap. I printed the version without the lash in TPU without support. Print settings: Material: TPU (recommended)…
2.5" Drive HDD / SSD Laptop Drive Caddy Disk Tray Bracket for Lenovo ThinkPad. Compatible Models: For Thinkpad T470 T480 T570, For Thinkpad P50 P51 P51S, For Thinkpad P70 P71 P72, For Thinkpad E460(NOT E470)， For Thinkpad E480 E485 R480,…
Here is a snap-together case for the FYSETC E4 board with the built-in antenna, since I couldn't find one. The top was designed to attach a 4010 fan on the outside. Also, take care when you're snapping the top on, as the tabs are a bit…
The handle's bottom part tends to snap easily, which can be a real pain. Without a reliable handle, you're basically asking for your curtain to get torn apart. I tried fixing the old one with glue, but it just didn't cut it for long. This…
Buttons for the Haute42 S16 and S13 controllers. The buttons in the image were printed on a Bambu X1C with fine settings at .2mm layer height. Added a slit to help removal of buttons with a keycap puller. With the X1C, the buttons were…
Für den Druck habe ich PETG Prusament verwendent. Nun schon einige Monate im Fahrzeug verbaut und hält ohne Probleme. Ich habe es auf meinem Prusa XL Multi Tool gedruckt mit standard Einstellungen. Die zwei Nasen habe ich nach dem Druck…
Removable frame for the Haute42/Cosmox G-Series and S-Series all-button leverless controllers. Frame slides into itself for compact storage. Model has spots for 10x3mm (G-Series) or 8x3mm (S-Series) disc magnets for added security. Barely…
Material - PLA Infill - 15% Support - Tree(auto) Layer - 0.2
BMW M3 E46, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better detail.…
This is an original design for a 110mm PC fan utilizing 11 forward curved blades
Wall Art featuring the BMW M3 E46 from the front. I modeled it using Inkscape. Hope you like it!
Print standing vertically, Coat with a clear Just glue on your trim and push it on Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .28 Infill: 10% Filament: eSun PLA+…
Larger versions of the Ratrig vcore4 "Electronics Wire Clip" to accommodate more cables
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
Spare part for the window regulator of the BMW E46. It may also fit other BMW models. Ersatzteil für die Fensterheber eines BMW E46, vielleicht passt es auch an anderen BMW Reihen, jedoch habe ich dies nicht überprüft.
This was made specifically for snap on set P/N: 213AFLEY which has E4-E10 E-Torx Sockets in ¼" drive, E11- E14 E-Torx Sockets in 3/8" drive, and E16-24 E-Torx Sockets in ½" drive. It also has an extra spot for a 3/8" drive E10 E-Torx…
Simple to print. Pls see photos.
