Alien - Xenomorph - Full Figure - 25 CM
How Xenomorph is made - https://youtu.be/Upa737w-dKQ
- Downloads
- 24,298
- Likes
- 5,221
- Rating
- 4.94
Counting matching models…
How Xenomorph is made - https://youtu.be/Upa737w-dKQ
This is venom skull on symbiont base with tongue . Base and tongue is designet for faster print without support . Hole in base for tongue is biger .If you want , try scale him up a little . Happy printing.. Print instructions Category:…
Xenomorphic six sided die. Added new gcode (2/21/2024) This worked awesome. I loaded some pictures. Minimal supports on the outside and no supports on the inside.
I would like to share with you little cute monsters 😉
Alien - Xenomorph - Full Figure - support test from twitter joseph prusa account original from https://www.myminifactory.com/fr/object/3d-print-alien-xenomorph-full-figure-25-cm-82660
Update 2025-6-25: Added fusion 360 archive file so other can edit or adjust file as they want. Please do not judge me to harshly, I did not label all of my sketches. A slim profile wall mount for a Lenovo M11 tablet so it can be used as a…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2 (Recommended) Scale it as you like :)
A protective case for Lenovo legion go tablet; All the protective cases available so far did not support controller separation, so I made my own. it also has slot for perpendicular USB-C adapter on top USB-C slot and kickstand. print with…
xenomorphic Chess Piece Set. Added STL and OBJ versions on 12/1/2024
Update 01.01.2022: ich hab das Design nochmal etwas angepasst und verbessert. Update 01.01.2021: I adjusted and improved the design a bit.…
Please click if you appreciate my work :) Aggression. Geometry. Obsession. This 3D printable wall sculpture of the Lamborghini Veneno is for those who believe design should strike like a weapon. Based on one of the rarest and most radical…
I love this model by Printed obsession and wanted to make it larger, so I did. I have also completely redone the supports with Prusaslicer paint on supports to have as few as possible (this took a while and two failed prints to get just…
Remove all the mess at your desk by moving the dock of the surface. This model allow you to hang your dock on the back of your desk, and it is easy to move. It is recommended to print the model in PETG, and to make it strong i recommedn 4…
Hello, Welcome to my profile, full of models and miniatures :-) I have Xenomorph figures for you. They are quite nice and print well. I used Bambulab PLA Basic as the material. It prints really well. It is better to use supports! If you…
I am working on Version 2, with the shorter neck first. Instead of using a threaded rod inside the neck, I'm now using a vertical aluminum strip (2 x 15mm) glued into the neck, which provides much better stiffness and prevents bending…
A remix of mhparsons Prusa camera mount. The cable channel has been modified to accommodate a usb cable - this does unfortunately mean it needs multiple supports. The included g-code file has supports painted on in all the necessary…
The idea is to place the console attached to the TV by connecting the original power supply, and use the other port through a USB-C to HDMI connector to the TV. The G-Code file is configured for a layer height of 0.2 mm @ 25%, using a…
The left shift key on my Lenovo Thinkpad X1 Carbon 6. Generation broke. I didn't find another source where you get only this key alone. So I desigend a replacement and know it works like a new one. It has some really fine details so it's…
My LENOVO LEGION 5 laptop spends most of time on the desk. So, I had to find the way to hang its charger under the desk top, that it doesn't take up additional space. That is the result, a simple hanger for LENOVO 230W charger (type:…
I designed this because I wanted extra desk space. You can mount the laptop either closed or open, if you wanted to still use your laptop screen when it's docked. The front of the stand features an opening so you can still use the…
Ancient Greeks were famous for being the earliest known culture to produce anatomically accurate figures in naturalistic poses. “ Diadumenos ,” meaning a person wearing an ornamental headband, is one of the most famous of these subjects.…
I use this adapter for faster and easier connection of my laptop at my office. Now i only need to plug in this adapter and it is connected with power, display and usb devices. For device connection, i use FITLONG 8-in-1 USB C Hub.
This model lets you mount a Freenove ESP32-WROVER board (buy from their global site or Amazon ) in your enclosure and use it to automatically upload images to Prusa Connect. The mount provides two degrees of freedom to adjust the aim of…
Lenovo M10 (3rd Gen) Wallmount This wall mount is specially designed for the Lenovo M10 (3rd Gen) tablet. The tablet is inserted from the side , ensuring a secure fit while still allowing easy removal. The mount is perfect as a control…
A HDD cover thats fits lenovo thinkpad models x60, x60s, x61 & x61s.
Print amount for full board game (small variant): Castles of Mad King Ludwig: 48x 1000, 30x 5000 For sale: 84x 1000 Coins are defined in attached openscad source and it is easy to define your own sizes and denominations there. Note: you…
Based on the Lenovo Thinkpad workstation W530. It was scaled down by 1:5 except the hight which was scaled by 1:3 to allow for a more rigid hinge mechanism. Clip the display onto the base. Display then can be opened and closed and should…
To improve cooling and performance, I designed additional feet for my Lenovo P15 (2nd generation). This prevents the warm air from accumulating so much under the motherboard. The keyboard's angle is only changed very slightly, which means…
Obiwan Kenobi Before and After : Force Ghost.
Just to have a little bit less mess on the table. V1 - smaller, screws under the hood V2 - with screw openings on the wings Layer 0.2mm 4 Perimeters No Supports No Brim PETG or whatever For 3mm screws with sunken head.
A version of a Diadumenos torso with the gap between the legs closed and the angle of the shoulder stumps increased to make it easier to print as a continuous single outline object. Shout out to Cosmo Wenman , watakach , and Polykleitos .
I loved this original design, and immediately thought it would be a great way to hold my tools, but it took a while to get the knowledge and skills to be able to modify it to fit, and to be properly printable. I built this to work with…
This 3D model replaces the original tray holder part for the Kinderkraft Enock high chair. Perfect for fixing a broken or missing holder with better stability of the tray (tighter tolerances). Recommended material: PETG (for better…
Headphone holder for a Jabra headset for my Lenovo L580 laptop. The holder is attached to the right-hand corner of the laptop. Printed with a Prusa Mini+. Support should be activated.
Both feet of my Lenovo Thinkpad Keyboard 2 broke after a while so I took my calipers and designed new ones. They work identical to the original ones and even have the same satisfying click that might have made me brake the old ones. :P I…
This is from my model that can hold tissue, but I've angled it a bit it looks super creepy now like it's coming out of the muck! Xenomorph tree support contest entry
This custom horizontal phone holder is designed for the Fiat Grande Punto , offering a stable and centered position for your smartphone — perfect for navigation or music control without side distractions while driving. Originally designed…
The OEM ports on the Cyclone loader are simply a few small holes drilled in the housing to allow the gas that cycles the feed to exhaust. This leaves them completely exposed to the elements. If you play woodsball/milsim this leaves them…
Lenovo 530s stands Was designed to this particular model but can fit in other model of laptops (I've tested in a Dell Latitud 7700 and in Asus X510). The Gap between the hook and the circle is 12mm Hight is 45 mm. This was printed:…
This is a very basic one peace "print, mount and forget" solution for most lenovo 45W power supplies tested with lenovo M260 45W second generation thinkpad 45W tiny m910/920 45W may fit some 60Ws too It will not win any award ;-) but it…
🇦🇷 Franco Colapinto Tribute Bust Fan-made tribute bust celebrating Franco's F1 Road Show exhibition in Buenos Aires. Features Franco with his characteristic mate, honoring Argentine talent and the excitement of bringing an F1 car to the…
This is a quick adapter I made that lets you use the Denon AVR cardboard mic Stand for the UMIK-1. The finished print should fit the UMIK-1 snugly, but not too tight. Scale down or up 1% to desired tightness. This can be made with either…
Bracket for Intel NIC X710-DA2 by Dell for the Lenovo M720q. The bracket has: Small slots for the LEDs are included. Holes for M3-inserts. Aditional holes for ventilation. Recess for USB cable. It is printed with the outside facing side…
I wanted a way to clear some of the clutter from my desk, so I designed and printed a mount to hang my Minifuse 2 from the bottom of my Lenovo Thinkvision 27" screen.
Print without supports :] Initially I wanted to make the model much wider and diverse but I realized it could be a long print and I minimized the print space and use for supports. Also included an optional removable box to store mini…
A simple laptop power supply holder for the table top. The holder is attached to the tabletop with a max. 25mm screw. Suitable for Lenovo's laptop.
materiál PLA tryska 0,4 mm vrstvy 0,2 mm počet kusů naznačen v názvu souboru jako osy používat filament kalibrace otvorů vrtákem 1,80 mm hlavičku osy otáčení vytvořit zahřátím filamentu varianta max je snadnější na tisk i montáž, ztrácí…
Wall art: Never been enough (two colours) 20 cm
DeWALT prenosný držiak na batérie a nabíjačku, držiak pre 4 kusy batérií. Má dobrú stabilitu vďaka širokému podstavcu a nízkemu ťažisku. Dúfam, že niekomu pomôže.
This is a 2.5" HDD or SSD mount for Lenovo All-in-One Desktop Computers. This should fit the following Lenovo All-in-One models: C340 C440 C355 C455 The screws used for attaching are M3 x 4mm.
Drilling into the phenolic top is a giant pain, and if you mess up you have ruined the top. I wanted to use the predrilled holes in the table to mount my dustright dust collection box, but none of the holes lined up. So I modeled the…
A horizontal stand for the Lenovo thunderbolt docking station I made in order to reduce clutter on my desk and make the ports easily accessible. Unfortunately it covers up the USB-A, minijack and thunderbolt downstream ports on the front…
jedná se o prázdnou cedulku kde si můžete v programu (např. tinkercad) dopsat vlastní text nebo dopsat např. permanentním fixem.
Desktop stand for a PV780, or PV780B, or HV780 display. Includes holes for 8-32 mounting screws, or bezel mount. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15% Supports: No Print Orientation: Default as modeled…
You have to print the file 2 times and then you have to put 16 5x1 magnets into the holes normally it is fine to put the magnets with a hammer in. But sometimes you have to glue it witch superglue. I'm sure you will make it. If you have…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
An articulated dinosaur skeleton with a removable skull. Triceratops, Styracosaurus Xenocerotops and Diablocerotops skulls included. Easy to print and should not need supports. Print with 2 or 3 walls @.16 layer height.
Let's Retract! Spider-Man Web Only. Print at least 150mm height. 3 perimeters. To show support please like my designs. :P Time-lapse print video : https://youtu.be/SaA_DnNp9xM Category: Sculptures If you want to customize your guitar,…
Unleash the terror of the ' Venomous Horror '! This massive scorpion features spiked claws and a menacing tail. With a skull motif on its back and multiple eyes scattered across its head, it's a perfect fit for any horror collection. If…
The Valorant Xenohunter melee knife is part of the Xenohunter Collection. This is a five skin bundle released on June 8th 2022 and includes melee knife, a Frenzy, Bucky, Phantom and Odin. Based on the Alien franchise, the weapon designs…
[English version on Github ] [Dispo chez Drone FPV Racer (lient affilié)] Version actuelle : 1.6.0 (cf. changelog en bas de page) L'essentiel en quelques points : Solidité et rigidité (bras de 6 mm) Performances de vol excellentes, facile…
if you like this kind of stuff consider supporting me on my Patreon www.patreon.com/wekster
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
UPDATE: added 2 part split version, even fits a Prusa Mini I saw that idea originally at JackOfTheDust website. They making limited sculptures with crazy ideas. Usually sold out as it appears. Used the head model of PrintedObsessio's…
Xenomorfo Alien stampato con pla Polymaker Polyterra Cotton White,ATTENZIONE:I SUPPORTI SI DEVONO RIMUOVERE CON ATTENZIONE E DELICATEZZA SOPRATUTTO NELLA ZONA DELLA CODA E DELLE MANI PER EVITARE DISTACCAMENTI E USARE STRUMENTI ADATTI COME…
Alien Xenomorph - Fan Art
🇬🇷 Καλως ηρθες στην ΕΛΛΑΔΑ! Welcome to Greece! The Parthenon is the symbol of the city of Athens, all of Greece, and even western civilization! This monumental building is located in the heart of the Acropolis, an elevated ancient citadel…
🚧🚧🚧🚧🚧🚧🚧🚧🚧🚧🚧🚧🚧🚧🚧🚧🚧🚧🚧🚧🚧🚧🚧 La mise à jour pour le O4 Pro est globalement terminée. Il ne manque que les mises à jour des supports d'Action Cam qui devraient arriver prochainement, ainsi que les TPU soft mount pour le O4 Pro.…
UPDATE 2022.07.27.: This model is the Ep. IV version as the original prop looked in 1977. Recently I've designed a new one based on the 2022 Disney+ Mini Series prop. You can check it here:…
[English version on Github ] [Dispo chez Drone FPV Racer (lient affilié)] Version actuelle : 1.2.1 (cf. changelog en bas de page) L'essentiel en quelques points : Solidité et rigidité Performances de vol excellentes, facile à tuner…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Are you a fan of the Alien Movies? Wish you could 3D print a bust of it? Done! I present to you, Xenomorph Alien Bust. I printed it in EIegoo PETG Rapid to achieve, well whatever they promote. I sanded it first with a Scuff pad, then a…
This was originally created by @halloweenhome. it takes a few days to print. feel free to slice it in any way that you need. If you want to know more, please join my group called Ceiling Xenomorph Info Listen to some of my music here!…
Update 06.06.2024: Correction of a painting error on the model with black hood. Update 26.05.2024: Added two version for 4-color multicolor print (AMS & MMU). With white hood and with black hood. Summary This is a model of a Toyota…
🇬🇷 What did the Parthenon look like at the height of Athenian splendor? Nobody knows for sure, but traces of paint and tile found in the ruins give archaeologists and expert architects an idea. This hypothetical reconstruction is also…
Here is my newly redesigned split model of the Obi-Wan saber from the first 2 Star Wars prequels. This was created using calipers on a metal replica to achieve more accurate dimensions. Only parts that require supports are the Lower Grip…
Enter a new dimension of strategy with this 3D printable alien chess set . Unique horror design : biomechanical alien-inspired pieces including pawns, rooks, knights, bishops, queen, and king. Highly detailed : intricate textures and…
PATREON : https://www.patreon.com/cw/mona3dstudio Join my Patreon this month: for just €10, you’ll get 6 designs from the Welcome Pack, this month’s new files, and a permanent 30% discount on everything else! Don’t miss out on this deal!…
My Etsy shop here: https://www.etsy.com/listing/4510203095/alien-xenomorph-3d-printed-sculpture?sr_prefetch=1&pf_from=shop_home&ref=shop_home_active_1&frs=1&logging_key=2556fbefeed79bdc8648fb177258d99dc1bc8de8%3A4510203095
This is a highly detailed 3D printed model inspired by the Lamborghini Veneno , designed to look like a real-life print — not a toy, not painted, and not multi-color. The entire model is printed in one single color , including the…
27 June 2025 Here are the latest updates! Xenomorph OG The LED's are moved to the front and the air duct are bigger and also they have Vortex generators. this is adding 10% more airflow resulting in better part cooling. 2 May 2025…
Adapter for lenovo legion go connect
👉 Join Vault Access on Patreon: https://www.patreon.com/c/TheDuckVault/membership Vault Access gets you: ✅ The commercial license to print and sell all 400+ ducks, this one included ✅ 210+ exclusive ducks, all yours to download the moment…
A sample of my upcoming paid pack of climbing holds There are 8 sample holds for you to try which has been brought to you by my generous holiday spirit :) Sample Crimp 1 A medium size crimp with a moderate amount of incut but a small edge…
I have designed this for the lenovo M93P tiny but may fit other devices also. To print it either print it flat as on model or place it on the front
Statue created as entry for the Prusa Printers contest
Alien - Xenomorph Can Holder (two types) #1 #2 Fits long EU cans with a capacity of 0.5L . You can also use my insert for 12oz cans (link below) Recommended print settings: PLA, 0.2mm layers, 2-3walls, 8-10%gyroid, Tree supports (at least…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Made a fast keychain form the negative layer of my venom face
I've been wanting to set up a Tiny cluster using my M720q model computers for a while, and with that have them use 10G networking. It seems that many people do use 10G network cards in these machines with varying success, the only issue…
In honour of Alien: Earth being released, please meet the Dummy13 Xenomorph! Printed & assembeled the same as the OG Dummy13 with an added tail & leg section, and of course the iconic Xenomorph head. The frame is printed with no supports,…
DISCLAMER This is a non-commercial model for personal fun made for serious Star Wars fans by a serious Star Wars fan. I've shared them for free as a way of giving back to the 3D printing community. Plese Do not sell either the files or…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
This 3D model represents the iconic head of an alien xenomorph, featuring its sleek, elongated shape and menacing, tooth-filled jaws. Designed for resin 3D printing, the model is mounted on a detailed base, making it an excellent display…
A stand for the Lenovo Legion 5 laptop that allows you to close the lid
I have a Lenovo ThinkCentre Tiny M90q PC that I wanted to mount under the bottom shelf of my lab workbench. I looked around for existing mounts and couldn't find anything that met my needs, so I set out to design one. I used four #8 x ¾"…
This is Spiderman's Venom Symbiote suit for the MINI 13 figure by soozafone . The Spiderman-Hands.stl is made possible thanks to the MINI 13 Hand Pack by Dr Operator . The Venom-Head.stl includes recesses that fit the Venom-Eyes.stl. The…
Low profile, similar to stock backplate More holes ≠ better cooling Fan standoff to prevent the plate from pressing against the fan and blocking airflow Blocks turbulent areas so airflow is better directed Creates a negative air pressure…
The front plate is pretty hard to get off without breaking it. Be prepared to use Glue, the fit is also pretty hard to get right. Might be worth looking at my other model which is just a vented lid, you need to tin-snip the top out of the…