Counting matching models…
I saw lots of interesting projects on the internet that connected three wooden rods in a teepee tent style. If you come up with any other interesting ideas, please post a make. Some ideas that I found: sideboard table plant stand jewelry…
My little nephew got a tiny teepee for Christmas. While it is incredibly cute, it's a two person job to hold and tie the tent poles together while holding up the tarp. This is less than ideal. Therefore, I thought I'd design this bracket…
Temporary note: Hey there! If you loved this design, please consider voting for it in the FLSUN 3D design competition found here: https://flsun3d.com/pages/gallery It doesn't take any time or money, but I'm a high-schooler who would…
Dont you love it when you have to readjust/repair those strings on the top of kids teepee? Here is the solution. Technically should work even without screws, depends on the kids mechanical symphathy. Im providing both versions, I ended up…
The Sensepeek SQ10 Probes are really great for freehand measurements, debugging and programming, but storing them is a hassle because the tips are fragile and can be damaged when they are banging around in a box. To counteract the…
Smallsword hilt in 3 parts that may be useful for HEMA training. A dish guard has been included, although personally I use a normal aluminum dish guard. Printed with PLA+ or better. Handle Can be printed upright without supports. Raft…
This 3D-printed training rapier is the culmination of countless hours spent printing and testing under both light and heavy combat conditions. It’s specially crafted for Historical European Martial Arts (HEMA) clubs looking to incorporate…
This a simple holder to hold a foil or epee weapon on a wall. The holder is angled slightly upwards to keep the weapons
This is a basic Épée Fencing Sword compatible with “Dummy 13 Version 1.0”. Dummy 13 Version 1.0 © 2024 by Gabriel Rosiak is licensed under CC BY 4.0
Smallsword hilt in 3 parts that may be useful for HEMA training. This redo was inspired by other historic smallsword designs. All parts are interchangeable with the Mk 1. (The handle and dish are different in this one) Printed with PLA+…
Support pour Épée et Bouclier de Zelda ! Version originale. Support épée polyvalent : exposez fourreau OU épée au choix ! 📦 Contenu : 2x Support bouclier (56.7878 x 22 x 48 mm) 1x Support épée (93.059 x 52 x 14.5184 mm) ✨ Points clés :…
This is a fencing sword for your dummy 13 figure... you can use it for stop motion or just plain play. It's nice and long and can be printed without supports. Hope you enjoy... en garde!
This is a model of the plasitc portion of an epee socket. This can be used to replace one you have if you want to change the color, or if the original one broke. I tested mine in PETG, but PLA may also work. Print Settings: 0.2 MM layer…
A hub that can be printed for making children's teepees. Can be used with wooden dowels that are 3/4" or 19mm in diameter, and are about six feet or two meters or so long. Design your own skin/tent material, and let the little ones play.…
This is a replacement hub for a Kid Teepee Tent. The original part was not only fragile but got the angles completely wrong so it broke quickly. The tent's dimensions are: Pole diameter: 11 mm (-ish) Base side: 95 cm Upright pole side:…
I designed this simple and quick print to make your self a coat rack. You will need three 1 5/16th inch Dowels cut to your desired length. Mine were cut to my height. You can check out my YouTube channel on the final build along with my…
Parametric Tipi top connector for wood stick.
I made this design back in 2013 on Autodesk 123D to upload on shapeways (1009713). I originally designed everything hollow to save on cost. My account there has since gone inactive and all my products were deleted from their site. I found…
I printed mine with 20% infill, 200°C PLA on 55°C bed.
This bracket connects to the bottom of the four tent poles. Allows you to run dowel rods between each tent pole so it doesn't collapse or become saggy. Works on this tent and most that are similar to it:…
No supports needed. A very simple quick print. The tolerances are fairly tight, and if the screw holes don't line up with the flats on the barrel, you'll have to go in at an angle. The magnet is a 10mm diameter x 3mm thick one I had lying…
I made this design back in 2013 on Autodesk 123D to upload on shapeways (1010696). I originally designed everything hollow to save on cost. My account there has since gone inactive and all my products were deleted from their site. I found…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A cozy miniature boho-style teepee tent featuring…
Hi, Here is a kit to make a teepee shelf. The .stl files can be customized 3 values to customize : largeur_planche = width board epaisseur_planche = thickness board Hauteur_Tipie = Height teepee This will allow you to generate 6 files (3…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A cozy miniature teepee tent designed for dollhouses,…
These two rings add some hanging options to the tepee 5.2 tent. Printed with 3 walls at 20% infill, no supports. Tested in PLA and PETG, PETG is recommended due to better UV and temperature resistance.
Print PETG Required materials: Soldering iron, solder, 2 jumper wires, shrink wrap (as small as you can get it) Designed to be used with this print: https://www.printables.com/model/1210531 Assembly Instructions: take two jumper wire and…
reinforcement for children's teepee Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Infill: 3 Filament: Prusament PET-G , PLA Category: 3D Printing
A removable hook to hang your epees, foils and sabres. The hook is made to fit on up to 20x20 mm square bar (I've used 19x19 mm wooden bar, but smaller should work as well; don't use round bar, the hook will spin and the weapon will slide…
This design was heavily influenced by the fencing weapon tester by Yafra7, but I wanted to implement some changes to make it easier to print, hold the components in place securely and to fit the components available to me. the electronics…
The shortest possible tang for a fencing epee, designed to be used with an existing tip, wire, guard, bodycord socket, grip, and hex nut. Print the unthreaded version if you would rather use a die to cut the threads yourself. I found the…
I made this simple teepee to prevent your windshield wiper blades from freezing to your windshield without standing your wiper up vertically. I've always hated the idea of standing your windshield wipers up vertically when it snows, I…
An epee or sword handle which you can use with a 23mm in diameter broomstick or any other wooden stick.
Bumper End Caps for a Peugeot Teepee ramp conversion
A simple passive electronic hit detctor for an electric Epee. More info in the Instructions. The one pictured has no electronics in it, but my fencing coach has the working ones. DEC 2018: Updated with correction to the instructions…
My kids enjoyed the toy approximately for 1 day, then the inside ring got broken. I modeled replacement which seems to be working fine (PC recommended) If the tension is weak / blade is not solid enough, simply shorten the "pins". For…
remix: I added a screwhole and flattened the bottom Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: eryone PLA bronze Notes: I printed with 3 walls to be sure it's…
This is a corner connector that allows fitment of 1200mm x 19mm dowel spreader bars to be fitted to the base of the Ikea Hovlig teepee tent. This provides the teepee with a sturdy base structure, preventing kids from being able to…
These custom feet are designed for the IKEA HÖVLIG kids teepee tent to improve fabric tension and overall stability, keeping the poles properly spaced and removing their frustrating movement as soon as a kid touches them They allow you to…
I removed the cooling tower that was designed into this part. I am printing it on an SLA printer so I do not need it. Category: Hand Tools
## Overview This is what happens when you tell your kids that you have the filament on hand for printing Halloween decorations... I received the following answer: "Can you print me a mini urinal but the bowl is shaped like a skull?" And…
3D printed version of the Sensepeek PCBite component tray to keep small components close during PCB work. The design is obviously inspired by the original product and is only a quick sketch to try out a 3D printed version during PCB…
Transform your Peugeot Partner Tepee (Citroen Berlingo) dashboard with this custom 1-DIN slot phone holder. Designed for a secure fit. Robust construction ensures stability during drives. Easy installation in any standard 1-DIN bay.
Clip permettant la fixation le verrouillage de la trappe au sol derrière les sièges conducteur et passagé. Clip used to secure and lock the floor hatch behind the driver's and passenger's seats. Category: Other
This is a basic Épée Fencing Sword compatible with “Dummy 13 Version 1.0”. Dummy 13 Version 1.0 © 2024 by Gabriel Rosiak is licensed under CC BY 4.0
I made this simple teepee to prevent your windshield wiper blades from freezing to your windshield without standing your wiper up vertically. I've always hated the idea of standing your windshield wipers up vertically when it snows, I…
This is a fencing sword for your dummy 13 figure... you can use it for stop motion or just plain play. It's nice and long and can be printed without supports. Hope you enjoy... en garde!
