41 models
OpenFaceMask is an 3D printable open-source protective mask, that only requires parts which are available in every common household. No gluing, no sewing required! The frame can be pressed together and minimizes print time when using SLS…
Print approx. €3.04–€3.71 excl. taxPreliminary estimate for one variant
Not to reinvent the wheel but my mother was having a hard time with the other ear protectors I downloaded and printed so I designed this to be very easy to hook the elastic but difficult for the elastic to fall off. She says she likes it…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant
a holder (that clips on your pants) for your fasemask that keeps it coverd against dust and other nasty stuf. please like. supports needed : ( [on bed only] print on side! Print instructions suports needed : ( on bed 0.2 mm layer heigt 10…
Print approx. €3.05–€3.73 excl. taxPreliminary estimate for one variant
This is a support for the facemask with ear band. Wear this kind of mask in Hospitals all DAY, which will lead to lesions and wounds on the ears. With this, the tension is given to the support, on the back of the neck. Questa banda serve…
The updated face mask with the higher forehead coverage
Most ski areas are requiring a facemask in lift lines and while riding lifts. This clip attaches to your helmet strap and allows easy and quick donning and removal of facemask, without removing helmet. Fits 15mm straps. Place on back ear…
Design Video: https://youtu.be/iTilxorVIp0 Print a mask of my face, perfect for scaring the neighbors! Check out my Amazon Page to see what kind of gear I use to make these models! Print instructions Prints out without supports, just lay…
Facemask case Print-in-place double hinges facemask case, no assembly required! Perfectly fits almost every type of facemask. Tested with surgical face masks, FFP3-FFP2-FFP1 facemasks without valves. The closure is ensured by a snap-fit…
Sliced original gasket to get eyes closer to lenses. With and without forehead plate. More details here. https://www.reddit.com/r/Pimax/comments/1raaw2u
Designed for the Prusa facemask shield this remix shortens the strap and adds a couple more adjustment openings, I found this design I could fit a few more on the print bed and also reduce the print time. Works well with Ninjaflex TPU. If…
!!! YOUTUBE TUTORIAL!!! Today I design for you a sewing template (pattern). Now you can easily sew your own COVID-19 facemask. This print is 1:1 so after printing you just take piece of cloth mark this template and both pocket fold and…
This is my second downloaded nose clip models from Prusaprinters website. I find this version nose clip is better than my previous printed model.
Organize your skincare routine with this simple 3D-printed facemask organizer. Designed for convenience, it holds multiple masks neatly, saving space and ensuring easy access. Elevate your self-care regimen with this stylish and…
Remix, thanks Printschnitzel for the original design. Handy quick release buckle for COVID facemasks with shoe string style ties.
Replacement facemask for the little gumball machine football helmets.
Here is my variant of a face mask ear saver. You can thread one side through the holes to fix the mask permanent. Use the hook on the other side to release the mask faster. PLA is flexible enough, but other materials should work also. It…
Set for sewing AntiCovid face mask or just for having fun. The main idea was to recycle - or better said - not to waste the prusament spool. The set has many possibilities of use - it depends of how many parts you print. You can also use…
Easy to print, no supports. at 0,2mm ~15min print time.
I remixed "Simple clip for face mask (Corona virus Covid-19 protection)" from Pavel Tajdus ( https://www.prusaprinters.org/social/23031-pavel-tajdus ) to add hinges for those users wanting to print in PLA or complaining about them…
Simple TPU facemask strap to save your ears!
I got inspired vom the model from rene100m( https://www.thingiverse.com/thing:5160170 ) but i was not happy because the band from the mask came lose. so I designet one wich holds on to the band. to relieve the ears while…
We created a custom facemask organizer, to fit in a small 172mm x 172mm bathroom shelf. Our aim was to stow away cosmetic facemasks efficiently and display it for easy use. Model outer dimensions 172mm length 172mm width 90mm height
Custom facemask hanger. The base have five holes for arms. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.3 Infill: 10 Category: Organization
Changed the knob because I didnt like the poor print quality resulting of the overhang.
● This STL file is recommended for FDM Printers! ● 3D Printing Time Based on Ender 3: 1 Day 13 Hours 55 Minutes (will vary accord to you printer model) ● Approximately Heigth: 23 cm 3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) ● Line Width/…
We often walk outside in the rain and end up with wet face masks. This rack can be placed over a vent or in a dryer. This can potentially be used to disinfect masks if higher temperatures are used. (Pro tip: If the PLA melts it is…
I couldn't find cases for the style of FFP2 mask that is currently quite common at least in my country so I ended up designing my own. The model consists of two parts, the bottom and the lid and they are held together with magnets (4x2 mm…
This is a work in progress. Inspired by Ethix Facehugger https://www.team-blacksheep.com/products/prod:ethix\_gopro\_mask , I wanted minimal protection for my GoPro Hero 7. The one I printed at 40% infill came out to 8g in weight. GoPro…
These are clips meant to fit in a baseball cap, to allow a face mask to be easily attached without straining your ears. I made these after being disappointed with what I got from…
Doporučuji tisknout 0,25mm pro pružnost ale i pevnost. Na jedné straně buď přihnout nebo odstranit “pacičky” pro lepší sejmutí a nasazení respirátoru. Na druhé straně nechat permanentně. Výhodou tohoto modelu je že se rouska nemůže jen…
These hooks work for ~3/8in width straps. The slots are 10mm wide. Category: Accessories
Easy to print model of a facemask clip for on the helmet with straps of 16 mm. See my other models for other sizes. Got feedback or questions? Please message me! +/- 11 minutes printing time for 1 set (More at once=faster) No supports…
I try to solve the problem of fogging on my eye glass by wearing a special facemask cover. It contains one back part, one front part and two sidearms. I suggest to remove the back buckle on each side for easy sidearm insertion and fitting…
Easy to print model of a facemask clip for on the helmet with straps of 12 mm. See my other models for other sizes. Got feedback or questions? Please message me! +/- 11 minutes printing time for 1 set (More at once=faster) No supports…
Keeps your Facemask correctly fitted and your ears from bending Very simple and easy print, if your rubber bands are too long on the masks or the rubber irritates the skin behind your ears, this is your fix. also great for kids. Help me…
A Facemask holder that tells you exactly what it is. Use some 3M double sided tape or 3M strips to attach to the wall
Easy to print model of a facemask clip for on the helmet with straps of 8 mm. See my other models for other sizes. Got feedback or questions? Please message me! +/- 11 minutes printing time for 1 set (More at once=faster) No supports…
I enlarged and opened up the part of the fob connecting to the keychain, so it functions as a hook. I use them to hang up my facemask, so I'm allways reminded to grap it when I leave the house. Print Settings Printer Brand: Creality…
Designed this face mask holder as to organize it well from clutter and for hygiene purpose. The extended hook is about 12cm in length with ribs and a J hook. Allows multiple mask holder and reused face mask. The wall plat slot is a tight…
I try to slove the problem of fogging on my eye glass by wearing a special facemask cover. It contains one back part, one front part and two sidearms. I suggest to remove the back buckle on each side for easy sidearm insertion and fitting…
This is a notably simple pair of hinges that secure a square filter across your face comfortably. Accordion-fold the ends of the filter and secure with either a pin or a safety pin. Use a rubber band on the hooks and loop around the ears…
