Search results: fdm

Sort order

1,517 models

P
PrintablesPrintedByMark

FDM friendly Guardian from Zelda Breath of the Wild

This high-detail Guardian is ready to watch over your home. The three segments spin independently and are designed for a minimally supported print. There are three segments plus an additional alignment pin. The provided .3mf file has…

Print approx. €5.26–€6.43 excl. taxPreliminary estimate for one variant

Downloads
857
Likes
192
Rating
5
P
PrintablesElectroHawk

Stacked Honeycomb part for FDM

I stacked 10 of the original honeycomb wall part on top of each other and separating them with a thin layer gap for easy separation. I also used ironing on each layer to make the separation of the pieces easier. The piece is turned upside…

Print approx. €48.28–€59.01 excl. taxPreliminary estimate for one variant

Downloads
634
Likes
102
Rating
5
P
PrintablesLukáš Toman

FDM Eiffel Tower FDM

CZ-Měřítko jeho 220 mm, 240 mm upscale show být v pořádku Výška vrstvy 0,2 nebo 0,3 (foto je 0,3) Obvod 2 nebo více Na výplni opravdu nezáleží, odešel jsem jako 10% Gyroid horní vrstva 0,6 mm+ takže 2 pro 0,3 mm nebo 3 pro 0,2 výšky…

Print approx. €31.97–€39.07 excl. taxPreliminary estimate for one variant

Downloads
478
Likes
29
Rating
5
P
PrintablesNikolai

Slotted spatula for FDM and SLA Printers

An FDM printed spatula for use on FEP film on SLA printers. v1 Print instructions Intended to be printed in PETG at 0.1mm layer height on smooth PEI.

Print approx. €1.50–€1.84 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
381
Likes
33
Rating
5
P
PrintablesBrite Minis

Sausage mount (supportless, FDM friendly)

A kingdom for a sausage! Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE The supportless lizard mount seen in one of the images is available…

Print approx. €2.60–€3.17 excl. taxPreliminary estimate for one variant

Downloads
308
Likes
69
Rating
5
P

Quincy Cross - Bleach Thousand Year Blood War FDM/MSLA

The "cross"/pentagram used by Quincy to draw reishi out of the environment to form their bows. They are all different sizes for different individuals in the anime/manga so scale according to how big you want it (ex. Ryūken's is the size…

Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant

Downloads
240
Likes
39
Rating
5
P

Apollo Justice Bracelet - Apollo Justice: Ace Attorney - FDM

“Gotcha” Apollo Justice's cherished and consistently worn bracelet. It tightens on his wrist when when a witness displays nervous habits, however this one is just a prop for cosplay. Fits a wrist 3" (or 76mm) in diameter. The two sides…

Print approx. €5.30–€6.48 excl. taxPreliminary estimate for one variant

Downloads
209
Likes
42
Rating
0
P

Corrupted Hexcore Anomaly - Arcane League of Legends - FDM/MSLA

A model of the hexcore anomaly seen in many different shapes and sizes throughout the second season. Print all the files once. Paint the inside surfaces and internal pieces. This is easier to do before assembling. Glue the internal pieces…

Print approx. €11.74–€14.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
201
Likes
43
Rating
5
P
Printables4D Filtration

Promethean Air Cleaner for FDM and MSLA (resin)

Highlights: MERV 13 filter maintains a good airflow rate while capturing the majority of particulates. HEPA 13 is available for extraction applications. Reusable cartridge uses low-dust coconut-shell activated carbon. Can be used as a…

Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant

Downloads
191
Likes
32
Rating
5
P
Printablesmauriko

Clairvoyance for 6 mm Scale Wargames - FDM Printable Without Supports

As with my other 6 mm scale miniatures I am trying to challenge what is possible with regular FDM printer (Prusa MK4 in my case). This over-weaponized mech is my original creation inspired by grimdark fishfolks and that mech wargame…

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant

Downloads
125
Likes
45
Rating
0
P
PrintablesCabbitCastle

Sonic Screwdriver Wand 2 - The FDM Redux

Tips are appreciated and go towards creating new designs Note: The whole thing was of course glued, sanded, painted, etc. You can get all of the instructions and details over at my instructable which I have published on this very thing:…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
96
Likes
59
Rating
5
P

Caitlyn Kiramman & Ambessa Medarda Sparring Staff - Arcane League of Legends - FDM

This build requires ¾" PVC pipe. Height wise, wing it. The total height of the staff is a few inches taller Caitlyn is (who is canonically ~6ft). I'm much shorter than that and trimmed my PVC accordingly so the top of the staff reaches…

Print approx. €16.18–€19.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
41
Likes
20
Rating
0
P
PrintablesYell

Eiffel Tower FDM printable

Intro Its the Eiffeltower not much to say other than this model can be printed with your glorified gluegun aka FDM printer like a Ender oder Prusa. ko-fi.com/yell3d Printsetting Scale its 220mm, 240mm upscale show be fine Layerheight 0.2…

Downloads
15,349
Likes
1,733
Rating
4.85
P
PrintablesBrite Minis

Hooded Stranger 28mm (No supports, FDM)

A hooded stranger, could be a cultist, monk, or just a cloaked traveler. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with…

Downloads
13,137
Likes
2,323
Rating
4.98
P
PrintablesBrite Minis

Dwarf Paladin 28mm (supportless, FDM friendly)

A dwarf tank/paladin The detail featured on the shield is inspired by an architectural detail of an Art Nouveau villa in Lodz, Poland. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a…

Downloads
7,691
Likes
954
Rating
4.98
P
PrintablesGamma4D

Ideal NASA Chainmail Hex for FDM(STEP included)

This is the ideal Hexagonal NASA Chainmail model for FDM. I increased the thickness of the chain from 1.2~1.5 to 1.8(mm), making it easy to print and more than twice as strong while keeping the size of the original. I designed this to…

Downloads
6,428
Likes
987
Rating
4.9
P
PrintablesBrite Minis

Crusader knight 28mm (supportless, FDM friendly)

Ready to smack nonbelievers. This has a thin pointy sword - make sure your cooling is good or print 2 at a time. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer…

Downloads
5,936
Likes
695
Rating
4.98
P
Printablescaesar_1111
18+

The source marked this model as adult content.

Downloads
5,574
Likes
717
Rating
4.87
P
PrintablesMarc Herter

FDM printer benchmark by Notebookcheck

This is the 3D-Model notebookcheck uses to test and review FDM(FFF) 3D Printers. With a base of only 66 mm x 66 mm, it can be used to find multiple quality issues. Integrated are tests for the build plate adhesion, extruder accuracy,…

Downloads
4,772
Likes
860
Rating
4.92
P
PrintablesPA1_MAKER

MINI GARAGE DIORAMA FOR 1/64 SCALE DIECASTS - OPTIMIZED FOR FDM PRINTING

Mini garage diorama to display your 1/64 diecasts especially designed for FDM printing. Everything prints fine, and is designed in fonction of layer heights and widths. Modular, very easy to print, this one requires no supports at all!!…

Downloads
3,561
Likes
501
Rating
5
P
PrintablesBrite Minis

Coronavirus Beholder 28mm (No supports, FDM friendly)

* NOTICE: I reuploaded the correct file - uploaded wrong file earlier that could cause slicing problems * Because it had to be done. The CoronaBeholder is a particularly nasty floating bag of eyeballs. Now, it can't transmit any diseases…

Downloads
3,292
Likes
436
Rating
4.94
P
PrintablesBrite Minis

Grim Reaper 28mm (supportless, FDM friendly)

He's coming... https://www.youtube.com/watch?v=-ea7oW4XXww Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and…

Downloads
2,909
Likes
338
Rating
4.92
P
PrintablesBrite Minis

Dragonborn 28mm (supportless, FDM friendly)

A dragonman Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis are available on my Patreon , Cults3D and MyMiniFactory . Let me know…

Downloads
2,657
Likes
355
Rating
4.88
P
PrintablesKnechtRootrecht

Cat cell phone holder remix optimized for FDM Printing

I found that cat Smartphone holder on thingiverse but I had some issues during the first print so I decided to modify the model for better printing. I modified the contact points of the cat's head and belly to the base plate so that there…

Downloads
2,623
Likes
116
Rating
4.93
P
PrintablesC0PATHUK

Pochita (Chainsaw Man) FDM - separated parts

I changed: • the location of the tail is moved lower; • the shape of the back handle; • my top handle (shape closer to anime); • my tail cord; • made a model of supports for the tongue, teeth and rear hole for the back handle. It is…

Downloads
2,481
Likes
514
Rating
4.97
P
PrintablesBrite Minis

Orc with axe 28mm (supportless, FDM friendly)

Orc fighter with axe Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The other minis in the…

Downloads
2,420
Likes
217
Rating
4.96
P
Printableslayerables

FREE Stitch STL – Cute Chibi Fan Art 3D Printable Model – Adorable Alien Puppy for FDM & Resin Printing

JOIN MY PATREON FOR MORE! :PATREON : LAYERABLES 💙 Free Stitch STL – Chibi-Style Fan Art for 3D Printing Download this adorable Stitch-inspired fan art STL completely free! This cute, big-eared alien pup is modeled in a charming chibi…

Downloads
2,330
Likes
153
Rating
5
P
PrintablesPiotrownik

Improving fine motor skills, designing a 3D FDM printed orthosis to assist in the rehabilitation of individuals with hand spasticity

video about project: [v 1.0] The project is currently in the alpha phase. I'm sharing the model for the finger, thumb, and wrist stabilizer, which can be molded to fit the wrist shape by heating it with a hairdryer or heat gun. To adjust…

Downloads
2,253
Likes
1,150
Rating
4.13
P
PrintablesSIVIS

LGX lite Extruder FDM case

I share this case just for DIY and fun, so don't use for commercial and don't ask me for step files Haldis HGX-LITE-extruder gear kit https://www.aliexpress.us/item/3256804512828973.html have to sand the 16mm shaft to 14mm Or buy 3mm…

Downloads
2,231
Likes
338
Rating
4.64
P
PrintablesBrite Minis

Suit of armor 28mm (supportless, FDM-friendly)

A suit of armour on a stand. It could be magically alive, who knows. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. Includes variants with 20mm…

Downloads
2,230
Likes
272
Rating
5
P
PrintablesMagig_I3Prusa

DND Wargame Wall Portal with steps (NOSupport) FDM Easy to print terrain

a cool detailed mesh for the Wargame terrain prints fine in 0,3 and below NO Support if your filament goes mad use overhang max 72deg HAVE FUN Game on

Downloads
2,202
Likes
246
Rating
5
P
PrintablesBrite Minis

Giant rat (supportless, FDM friendly)

A friendly rodent Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE The other minis seen in one of the images are available on my Patreon . Let…

Downloads
2,099
Likes
171
Rating
5
P
PrintablesJoshPeddle

Cherry MX Compatible Flat Top Keycap - FDM optimised - Simple to print

Introducing the Cherry MX Compatible Flat Top Keycap, the 3D printed keycap that makes typing a whole lot more fun! With its sleek and stylish flat top design, this keycap is the perfect way to add a personal touch to your keyboard.…

Downloads
2,086
Likes
177
Rating
5
P
PrintablesBrite Minis

Pentagram stone circle (supportless, FDM friendly)

A 3x3in stone circle with carved pentagram. Can be used as a piece of terrain or a base. Suitable for tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE A demon…

Downloads
2,071
Likes
412
Rating
4.88
P
PrintablesBrite Minis

Yet another knight 28mm (supportless, FDM friendly)

Yet another knight on foot with a sword. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The…

Downloads
2,014
Likes
216
Rating
5
P
PrintablesBrite Minis

Knight with pig-faced helmet 28mm (FDM, no supports needed)

A knight in a bascinet, pig-face visor (hounskull/hundsgugel) helmet. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with…

Downloads
1,946
Likes
220
Rating
5
P
Printablesfaultedlogic

Lady Justice Remix for Easy FDM printing

I wanted to make a nice desk ornament for somebody who recently started working in law offices for Oklahoma's Indigent Defense System and found jimjimjimmyjim's “old lady justice - statue - gubbins” model on Thingiverse. jimjimjimmyjim…

Downloads
1,941
Likes
145
Rating
4.29
P
PrintablesBrite Minis

Dark Warrior (Supportless, FDM friendly)

Big brute clad in metal. See how it prints: https://www.youtube.com/shorts/5sd5Ic9fE7A Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other…

Downloads
1,874
Likes
181
Rating
4.97
P
PrintablesBrite Minis

Frogfolk spearman 28mm (Supportless, FDM-friendly)

A frogman. Somebody forgot to drain the swamp and now it strikes back with pointy sticks. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE…

Downloads
1,828
Likes
224
Rating
4.92
P
PrintablesYell

Stanford Bunny FDM printable

Requires Support ! see images for Seams (aligned Setting) and Supports (auto generated) The Stanford bunny is a computer graphics 3D test model developed by Greg Turk and Marc Levoy in 1994 at Stanford University . The model consists of…

Downloads
1,812
Likes
107
Rating
4.78
P

Frieren Magic Staff - Sousou no Frieren (Frieren: Beyond Journey's End) - FDM

Frieren's Mage Staff - Sousou no Frieren / Frieren: Beyond Journey's End Red Fabric to wrap around the staff's head is not included. Thread the corner of the fabric through the bead and secure with adhesive. This build fits schedule 40…

Downloads
1,708
Likes
244
Rating
5
P
PrintablesBrite Minis

Cleric 28mm (supportless, FDM friendly)

A human cleric with mace Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The old wizard seen…

Downloads
1,706
Likes
188
Rating
5
P
PrintablesFreshPrints

Bambu Lab Anti-Vibration Feet for All 3D Printers FDM 2020 4040 frame, Anycubic Prusa Sovol Elegoo Voron Creality

These TPU feet are designed to decouple the BedSlinger from other 3D printers on the same surface by absorbing vibrational energy, helping to minimize machine wear caused by vibrations. Benefits When you place a single printer on the…

Downloads
1,699
Likes
407
Rating
4.93
P
PrintablesMarcoZ76

Bondtech BMG Prusa MK3S/MK2.5S v2 FDM printable + RHD ver.C fan Shroud

New version of Bondtech BMG Prusa Upgrade MK3S/MK2.5S with RHD ver.C fan shroud. I modified the original version model to be easy printable with FDM printers. The original source:…

Downloads
1,673
Likes
123
Rating
5
P
PrintablesBrite Minis

Ghost 28mm (Supportless, FDM friendly)

A ghost. Or maybe just some laundry on a windy day, who knows? Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis seen in one of the…

Downloads
1,635
Likes
204
Rating
4.92
P
PrintablesFeetOffTheTable

Bench Vice - FDM optimised

CHANGELOG v1.2.1 - Carriage Bolt Edition Tweaked the Knob + Cover pieces to reduce thin walls and features that wouldn't slice properly. Still requires supports on Cover Piece 1. v1.2f - Carriage Bolt Edition turning knob added, to allow…

Downloads
1,592
Likes
804
Rating
4.5
P
PrintablesBrite Minis

Sheep 28mm (supportless, FDM friendly)

Baaah. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE Other models seen in the images are available on my Patreon . Let me know how it…

Downloads
1,569
Likes
180
Rating
5
P
PrintablesBrite Minis

Bugbear 28mm (supportless, FDM friendly)

Supportless Bugbear with a club/mace. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The…

Downloads
1,552
Likes
160
Rating
5
P
PrintablesBrite Minis

Ogre - 28mm (FDM no suports needed)

A taunting Ogre on a 1inch base. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The other…

Downloads
1,504
Likes
147
Rating
4.91

Modular Medieval RPG House FDM-Friendly D&D Terrain

Updated!! 28mm Modular Medieval RPG House – FDM-Friendly Build the perfect tabletop RPG setting with this modular 28mm medieval house, designed for easy printing, gameplay, and future expansions. Whether you’re running D&D, Pathfinder,…

Downloads
1,478
Likes
437
Rating
5
P
PrintablesBrite Minis

Townsfolk zombie 28mm (supportless, FDM friendly)

A townsfolke zombie. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE Other zombies seen in…

Downloads
1,452
Likes
139
Rating
5
P
PrintablesBrite Minis

Nothic 28mm (Supportless, FDM-friendly)

A nothic. One-eyed fella with spikes. Created in Virtual Reality in Adobe Medium. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE the…

Downloads
1,427
Likes
120
Rating
5
P
PrintablesMagig_I3Prusa

DND Terrain arch Sandstone Desert Wall Landscape NOsupport FDMready Supportless

a simple stone arch 20k modell for diorama terrain USA Utha monumnt valey replicatet supportfree Have Fun

Downloads
1,403
Likes
152
Rating
5
P
PrintablesBrite Minis

Female druid 28mm (Supportless, FDM friendly)

Could be a generic female spellcaster too. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis seen in one of the images are…

Downloads
1,396
Likes
152
Rating
5
P
PrintablesBrite Minis

Ranger archer 28mm (suportless, FDM friendly

A human with a short bow. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The mounted archer…

Downloads
1,388
Likes
133
Rating
5
P
PrintablesNick Glennon

Easter basket for FDM

Thingiverse's MicrosoftStore account (defunct) upload titled “Easter Basket” (its files were licensed CC-BY), STL extracted and uploaded by user spencer April 3rd 2015 - https://www.thingiverse.com/thing:754898 I used Meshmixer's…

Downloads
1,379
Likes
136
Rating
4.8
P
PrintablesMagig_I3Prusa

DND Terrain Space Pillar Rough Stone FDM (Nosupport) wargame Easytoprint

prints in 0,2 use lower for detail 0,3 for more rough as of paint brushing Standard color as you like Drybrush some stones HAVE FUN MORE stones search my modells Terrain or DND ! PLEASE Like Some of my Portals and stone designs ! while…

Downloads
1,356
Likes
126
Rating
5
P
PrintablesBrite Minis

Elite Saracen Spearman 28mm (supportless, FDM friendly)

Elite Saracen Spearman. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The mounted spearman…

Downloads
1,315
Likes
141
Rating
5
P
PrintablesBrite Minis

Kobold 28mm (supportless, FDM friendly)

A kobold with a pickaxe Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE Other kobolds seen in…

Downloads
1,261
Likes
145
Rating
4.83
P
PrintablesBrite Minis

Fancy gnome 28mm (no supports, FDM)

A fancy gnome. I called him Fartor Giggley. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE A…

Downloads
1,257
Likes
143
Rating
5
P
PrintablesBrite Minis

Knight with axe 28mm (supportless, FDM friendly)

A knight with a battle axe and a wolf rib helmet. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases.…

Downloads
1,242
Likes
132
Rating
5
P
PrintablesRasmus Additive

Print-in-place hinge optimized for FDM – Various Sizes

Description This collection of print-in-place hinges is designed with versatility in mind, featuring a range of lengths and widths to fit different project needs. Each hinge prints fully assembled, no extra hardware or support needed –…

Downloads
1,227
Likes
317
Rating
4.75
P
PrintablesBrite Minis

Lizardman 28mm (No supports, FDM friendly)

A cold-blooded bipedal reptile. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The cameleon…

Downloads
1,205
Likes
149
Rating
5
P
PrintablesBrite Minis

Dog companion 28mm (no supports, FDM)

Here's a supportless fox terrier dog companion. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases.…

Downloads
1,202
Likes
171
Rating
4.96
P
PrintablesBrite Minis

Orc scout/archer 28mm (supportless, FDM friendly)

An Orc scout. Suitable for 28mm tabletop games. . Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The other minis in the photos…

Downloads
1,168
Likes
107
Rating
4.92
P
PrintablesBrite Minis

Orc with spear (supportless, FDM friendly)

Orc looter with spear Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The orc shaman seen in…

Downloads
1,157
Likes
106
Rating
5
P
PrintablesBrite Minis

Cyclops 28mm (supportless, FDM friendly)

A one-eyed fella. Bad at judging distance. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE Other models seen in the images are available on…

Downloads
1,156
Likes
116
Rating
4.92
P
PrintablesKelev

Water Elemental - D&D Miniature (Supportless/FDM Friendly)

Water Elemental, the liquid leviathan of the deep! This aqueous adversary flows through the battlefield with the elegance of a river and the force of a tsunami. With the ability to morph into a towering wave, it crashes down on its foes,…

Downloads
1,154
Likes
132
Rating
5
P
PrintablesBrite Minis

Gnoll 28mm (supportless, FDM friendly)

A Gnoll with axe Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE Other gnolls seen in the…

Downloads
1,143
Likes
130
Rating
5
P
PrintablesJake

Axis and Allies FDM printable sets

Hi everyone, I have been a huge fan of all axis and allies games for a couple of years now. I am proud to introduce FDM printable packs. The biplanes I will be finishing soon. I still have to make the air packs as well. Enjoy printing!…

Downloads
1,140
Likes
49
Rating
5
P
PrintablesBrite Minis

Yet another barrel (Supportless, FDM friendly)

A barrel. Yes, it's another barrel on Thingiverse. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis are…

Downloads
1,132
Likes
148
Rating
4.88
P
PrintablesCATIAV5FTW

FDM-Optimized Pocket Hole Jig

Pocket hole jig designed with FDM printing in mind. Print with the side that you'll drill through on the build plate. If it's printed with the bottom surface on the build plate, the drilling holes will come out crappy and lots of supports…

Downloads
1,094
Likes
430
Rating
5
P
PrintablesBrite Minis

Cloaked person (Supportless, FDM friendly)

A tightly wrapped person Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. Print video: Cloaked man - supportless FDM print - YouTube NOTE other…

Downloads
1,075
Likes
98
Rating
5
P
PrintablesBrite Minis

Dwarf rifleman 28mm (supportless, FDM friendly)

A dwarf gunner wearing a morion helmet. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The…

Downloads
1,074
Likes
116
Rating
5
P
PrintablesBrite Minis

Hireling with torch 28mm (supportless, FDM friendly)

A henchman with bow and torch. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis are…

Downloads
1,051
Likes
112
Rating
5
P

Stark 's Axe - Sousou no Frieren (Frieren: Beyond Journey's End) - FDM

Stark's Axe These parts fit onto a schedule 40 1" PVC Pipe. The seven small alignment pins and 2 large axe head threads should be printed lengthwise for maximum strength (I use 6mmx50mm wooden dowels bought off of Amazon). It is suggested…

Downloads
1,049
Likes
134
Rating
5
P
PrintablesBrite Minis

Catfolk with sword (Supportless, FDM friendly)

A kitteh with sword. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis are available on my Patreon , Cults3D and MyMiniFactory .…

Downloads
1,042
Likes
113
Rating
5
P
PrintablesKelev

Earth Elemental - D&D Miniature (Supportless/FDM Friendly)

Earth Elemental, the unstoppable juggernaut of the underground! This colossal creature lumbers forward like a walking mountain, with arms of jagged stone ready to crush anything in its path. Its body is a mosaic of dirt, rock, and…

Downloads
1,030
Likes
151
Rating
4.89
P
PrintablesBrite Minis

Wicker fence (Supportless, FDM friendly)

A wicker fence for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE The supportless giant model seen in the photo is available on my Patreon . Let me know…

Downloads
1,012
Likes
201
Rating
4.8
P
PrintablesBrite Minis

Gnome female 28mm (no supports, FDM friendly)

A gnomette, or female gnome, carrying a hammer, and drinking some ale. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with…

Downloads
1,003
Likes
101
Rating
5
P
PrintablesMagig_I3Prusa

Stone Pile Wargame Terrain Nosupport* FDMready

Supportless USE Cura max overhang 75deg (Experimental) Prints in 35min at 0,3 10% infill Zigzag Have fun

Downloads
994
Likes
78
Rating
5
P
PrintablesHaktan Altın

Eiffel Tower | best fdm friendly but accurate version

remixed from: https://www.printables.com/en/model/571918 and the mentioned. i mirrored the model so now both sides don't have internal cross-bars. this model is more “canon” (accurate) also i took the railings from: Eiffel Tower FDM…

Downloads
989
Likes
77
Rating
5
P
PrintablesBrite Minis

Halfling wanderer 28mm (Supportless, FDM friendly)

A travelling member of the Little Folk. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis seen in one of the images are available…

Downloads
966
Likes
91
Rating
5
P
PrintablesBrite Minis

Dark Elf Sorcerer LED 28mm (FDM, no supports)

This is a dark elf sorcerer designed to put a 3mm LED on his spider staff and a base with a space to slide in a CR1620 battery with holes for wires. Let's call him Nezznar. Check this page for instructions. Suitable for 28mm tabletop…

Downloads
964
Likes
115
Rating
4.67
P

FDMGeo Loudspeakers by Deposition Sound

The "Geos" are edgy, literally 😎 We've combined the sugary sweetness of the FDM5 top-end with an accurate and punchy mid-section and bottom end. If you're into critical listening, or even mixing and mastering, the FDMGeos are for you! The…

Downloads
957
Likes
129
Rating
5
P
PrintablesBrite Minis

Lizardman ranger 28mm (supportless, FDM friendly)

A cold-blooded bipedal reptile ranger. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The…

Downloads
946
Likes
104
Rating
4.88
P
Printablesexperify3d

Harry Potter Chess for FDM printers

Based on https://www.thingiverse.com/thing:4051361 + Complete new bases of the chess pieces. + hollow bases for adding weight. + TPU caps for the bases for adding grip. Very fun project, highly recommend. Printer used: Bambu Lab X1C and…

Downloads
941
Likes
116
Rating
5
P
PrintablesBrite Minis

Cat 28mm (Supportless, FDM-friendly)

kitteh! It's tiny, because it's for 28mm scale. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis are…

Downloads
937
Likes
141
Rating
4.95
P
PrintablesKelev

Air Elemental - D&D Miniature (Supportless/FDM Friendly)

Meet the Air Elemental, the tempestuous spirit of the skies! This whirling wonder is the ultimate master of hide-and-seek, blending seamlessly into the very air around you. With the power to transform into a screaming cyclone, it sweeps…

Downloads
923
Likes
152
Rating
4.67
P
PrintablesBrite Minis

Broken tree with spider web (supportless, FDM friendly)

Broken tree with optional cobweb Suitable for tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE More models seen in the images are available on my Patreon . Let…

Downloads
921
Likes
167
Rating
4.8
P
PrintablesBrite Minis

Fairy 28mm (Supportless, FDM-friendly)

Fairy. Or Pixie. Or elfling with wings. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis are…

Downloads
917
Likes
116
Rating
5
P
PrintablesRipper-Joe

Tasmanian Devil Version 2 - Optimized for FDM Printers

This Tasmanian Devil model is my second variation based on a remix of a model shared by user “JEFFREE” (https://cults3d.com/en/3d-model/art/taz-jeffree) on cults3d.com under Creative Commons 3.0 Non Commercial license. The model was…

Downloads
916
Likes
81
Rating
4.75
P
PrintablesBrite Minis

Elf warrior 28mm (supportless, FDM friendly)

Ready to mow down enemy ranks. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis are…

Downloads
914
Likes
94
Rating
5
P
PrintablesMagig_I3Prusa

DND 28mm Flat Stone Wall NOsupport FDM READY Fastprint

you can print this in 5min with 0,4 layerhight 1perimiter no infill 2 bottom 3 top layer Just some Graycoding HAVE Fun

Downloads
910
Likes
78
Rating
0
P
PrintablesBrite Minis

Tiefling female 28mm (no supports, FDM friendly)

A tiefling female with a blade. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The tieffling…

Downloads
907
Likes
91
Rating
5
P
PrintablesBibben

FDM Gamecube controller top shell

None of this would have been possible without the amazing work done by GearHawkStudios These models let you print and put together a fully functional top shell for a gamecube controller. For the build you will need 6x 8mm m2 bolts, 6x m2…

Downloads
894
Likes
118
Rating
4.4
P
PrintablesMeister Edel

Kids necklace bracelet beads pearls DIY jewelry 100% FDM

Heyho Here I have various beads that you can use to make necklaces, bracelets or other decorations :) Scalability I used a 1mm thread. Theoretically, however, threads up to a thickness of 1.6 mm should also fit well. The larger the…

Downloads
864
Likes
357
Rating
4.83
P
PrintablesBrite Minis

Saracen archer 28mm (supportless, FDM friendly)

An archer from a desert land. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The other…

Downloads
859
Likes
84
Rating
5
P
Printablesncsandor

Skull for Fdm

Print Settings Material: Gembird - Silver Pla Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Seam position: Aligned Seam Paint: Modell back side For Mini Settings Printer Settings - Extruder Length: 1.2 Retraction Speed: 40 Retract…

Downloads
858
Likes
97
Rating
5
P
PrintablesBrite Minis

Lumberjack 28mm (supportless, FDM friendly

He's a wood chopper and he's okay. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The…

Downloads
851
Likes
96
Rating
5