1,187 models
Now you can buy a printed one at: https://trajann.com/collections/fandesign with special Black Friday discount code"BF25OFF" Updated20231109 Someone suggested designing a new one for the baby, so I made a new one, just scale the length,…
Print approx. €3.40–€4.16 excl. taxPreliminary estimate for one variant
I had old utility blades with no usage laying around until I found this awesome design . I thought a few improvements could be made, so I changed the design a bit and added “grippy” features and “clicky” flexures. You can find a video of…
Print approx. €2.38–€2.91 excl. taxPreliminary estimate for PETGSource material: PET
This is a fast printing, fully parameterized cardboard style box. Why I did this I made this because I hated to print forever when I needed a little box, like a gift box or a container for srews or whatnot. This model is only 2 layers…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
This unique Print-in-Place keychain can hold your phone upright or sideways so you can watch videos on the go. Prints in under 40 minutes with no supports and is ready to use straight off the printer. The snap in design is satisfying and…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
YAPH?! (yet another phone holder?!) I needed a phone holder in my car to better read traffic information. This is what I came up with. Mostly as a design challenge since I just started printing, but works pretty well if I may say so. Why…
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for one variant
This is just a simple rescale of the original for use with tablets. I liked misterT's remix of jonnig's phone stand , especially the stronger front hinges, which tend to break easily in the original. But the "medium" version is too small…
Print approx. €3.39–€4.14 excl. taxPreliminary estimate for one variant
First you print the top 2 times, with the top down. there is no support needed inside the hinges. After that you can print all legs and hingepins. They all store easily inside and give you a wide range of table heigths. Assembly is super…
Print approx. €8.29–€10.14 excl. taxPreliminary estimate for one variant
Foldable legs for the Ortur Laser Master 3. Similar dimensions of the set sold by Ortur for $80. These have the option for reusing the original feet as well. Use a 25mm M5 bolt with M5 hex nut for securing legs to bracket. Use 8mm M4 bolt…
Print approx. €13.33–€16.29 excl. taxPreliminary estimate for one variant
Easy to print Photo stand. Easy to scale universal use
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Ich habe hier einen Cuehalter für bis zu vier Cues, eine Cueverlängerung oder auch für den abgeschraubten Jumpcue Griff und eine Kreide. Zusätzlich gibt es noch eine gedruckte Hülle. Der Kreidenhalter ist eine kleine Schublade, die hinten…
Print approx. €8.30–€10.15 excl. taxPreliminary estimate for PETGSource material: PET
My camp chair has hard arm rests and didn't come with a drink holder. So I've created one that folds up when not in use. Camp chair is a Boab brand. Prints in place and depending on your printer tolerance and accuracy, you may require…
Print approx. €10.19–€12.46 excl. taxPreliminary estimate for PETGSource material: PET
This design of a fair (all sides have equal probability to be rolled), utilizes two prints with different colours, stackt on each other. All sides of the dice are printed flat on the print-bed and then folded into the final dice. Last…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Update: I added a mirrored version of all bottom corners, top corners, and the middle bottom hinge. This is my version of the IKEA Lack enclosure. It is higher to put a plate of foam and concrete plate/ stone plate under the printer to…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
⭐ Foldable 3D Star – transforms into a Christmas Tree when opened A decorative model that combines two holiday themes in one: when closed, it forms a geometric star; when the top element is lifted, it unfolds into an eye-catching, layered…
Print approx. €5.12–€6.25 excl. taxPreliminary estimate for one variant
(pour le français, voir plus bas) Scream decoration for Halloween with bendable arms. You can use tape to hang it on the wall. Be careful when removing it from the board. The decoration is 0.6mm thick, print at 0.1mm or 0.2mm. You can…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
A amazing Beerholder to screw in the wall. If you need a beerholder - fold it down ant put your drink in. When you finished push it back up. I have it in my livingroom because we often have visitros to watch a movie together. No where to…
Print approx. €7.76–€9.49 excl. taxPreliminary estimate for one variant
The Amazfit Bip 6 uses a small magnetic USB-C charging adapter that clips onto the back of the watch. Unfortunately the magnet is fairly weak, so the charger can easily shift if the watch moves or if the cable pulls slightly on the…
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant
WATCH IN ACTION: https://youtu.be/DJhv8JvJUME WHY: This was made to be able to touch objects such as buttons or electronic screens that might have been in contact with bacteria or viruses such as COVID-19. With research such as…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
The holder is suitable for mounting a Lenovo T16 and a 16" monitor that can be folded back and forth on a shelf/window sill or table. The holder can be mounted on up to 21.5mm thick boards, tables or window sills (use the step file for…
Print approx. €13.33–€16.29 excl. taxPreliminary estimate for PETGSource material: PET
OneReach – Adaptive Back Grooming Extension for Philips MG5720 Achieving thorough back grooming is often a challenge – especially for individuals shaving alone or those with limited mobility. OneReach is a foldable, modular extension arm…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Folding hook. Size 40x60x13mm (without cover) 48x24x13 (with cover) My print settings Material: PETG Layer height: 0.15mm Perimeters: 6 Orientation of the hook on the bed: Side Supports: No Updated (added) Added alternative cover mounted…
C Ho Ho Ho, and a Merry Christmas! Presenting the 5 gram Christmas Gift Bow! As seen on MakerWorld! Easy to print, easy to assemble and easy to enjoy! Personally, I suck at making a nice bow on Christmas Gifts. I am, however, quite good…
Foldable phone stand: easy to print and easy to assemble
¿Quieres un soporte para teléfono móvil simple y fácil de imprimir? Presentamos: el soporte plegable para teléfono en forma de nido de abeja. Este soporte de impresión in situ también se puede imprimir en piezas separadas para una…
Designed to attach to your keychain, it folds into a compact form when not in use. Function Simply unfold the stand to create a stable support for your phone. It allows both: Vertical viewing (e.g. scrolling, video calls) Horizontal…
This is a stylish laptop stand that allows you to use the computer at 4 different angles but also allows you to completely fold it for easier storage and transportation. Print two pieces and place them underneath your laptop. You can…
Hi, https://twitter.com/Mkukkk is here :) Here is my list or requirement for a 3d-printed tripod: No need to buy additional parts. All parts should be printed in one night in one go. Thick design for reliability. No supports. No small…
Simple foldable laptop stand for desk that can be folded and carried around in carry bag easily. Folds into 24cm X 6cm X 2cm size Offers 7 adjustable angles Compatible with laptops up to 15.6 inches in size Offers great ventilation for…
The Stand This foldable book stand is designed to make learning more comfortable and use desk space more efficiently. The design in question, went through multiple iterations. This final version is robust and stable enough to even hold…
Simple and quick in printing a foldable phone holder/stand. Print in place.
This is the foldable Version of https://www.prusaprinters.org/de/prints/59978-wall-mounted-modular-hexagon-shelf Its designed to be printable in one piece and needs no support Mounting Video : https://youtu.be/-b9joHg71K8 Parts: 1)…
A remix of the "Credit card sized foldable mobile stand" by fns720, see https://www.printables.com/model/59615-credit-card-sized-foldable-mobile-stand Main purpose of the remix was twofold: to make it possible to set the phone to a more…
Remix of Paulo Ricardo Blank 's awesome model. I reworked the design to make it more print-friendly, with adjusted tolerances and fewer beveled edges. Printed at 0.2 mm layer height. Tested successfully in PLA and PET. Edit 2024 → New…
I needed a phone stand, so I created this one. I tried a lot of similar stands, but something was still missing. For the best results and a suitable variant, use the prepared plates! Changelog 2022-04-12 - Updated parts description…
This is a remix of Jonathan's great foldable mobile stand. Mine is a bit thicker and the dimensions are matching with the standard credit card (=85.6x54.0 mm). The model is pre-assembled. Depending on the calibration of your printer some…
Travel phone stand, lightweight, foldable. Low filament need(cca 11-13m). Radius (A,B,C,D,E,F) and Edge (G,H,I,J,K,L) versions. Size 130(high)x65(width)x90 (A,B,C,G,H,I) 130X70X90 (D,E,F,J,K,L) Hole for cable 4.9mm. Edge versions…
Foldable Gear Fidget with Hand Crank Toy, fidget or test print with decent tolerances > try to scale it down to test your printers calibration. For perfect motion add a drop of oil into the gaps around the 4 gears/wheels. Printing Tested…
This is based on the original thing by ChaosCoreTech and the subsequent remix by Cyphn . I was not quite satisfied with the stability of the core/logo mechanisms in either the original or remix and decided to rework the model so that it…
This is a DJI Mavic inspired drone powered by a Pixhawk 4 flight controller. I have attached a parts list for my used components. Therefore, if you want to use different components these might not fit into the 3D model. With this setup…
This is a decorative foldable gift box which you can use to gift small presents, decorate your desk, put under a tiny Christmas tree, store candies, and whatever you can think of. This design features a box base and a lid that fit…
If you want to support me or get commercial licenses , you can join my Patreon membership starting from just $2 per month: https://www.patreon.com/UniversalMaker3D Options: A version with no sacrificial layer to support the holes…
The first Foldable kickstand for Steam Deck work in progress EDIT: Now with second version for steeper angle! (deutsche Beschreibung weiter unten) This is an easy-to-print foldable stand for the Steam Deck. The print is optimised for…
Redesigned the slot little bigger to fit more screw types. Prints flat & side perfectly if printer is fine tuned. Otherwise side printing would work. Offset pin/hole: 0.3mm circular Minimum Settings Recommended: 5 Walls, 5 Top Layers, 5…
Precise Enough . (+-1mm) Update: Strong/Stiff - Version 2 Cheers
This is a modification of standard Voron 0.2 spool holder, made foldable. It's locking into folded position and extended position. This holder is extended from the standard one and should fit spools up to 85mm. Personally, it's a lot…
Support me & Join Printables Club Assembly list of non-printed items for shovel 2 pcs - M5 screw 15mm with truss head 1 pcs - M5 screw 12mm with truss head 3 pcs - M5 nut with nylon insert 1 pcs - M8 50mm screw with internal hex head 1…
Parts needed: Bolt M4x45 Bolt M3x6 (x2) Bolt M3x10 (x2) Nut M3 (x2)
Always have a phone stand to hand! Both portrait and landscape supported. The stand is compatible with a wide range of smartphones, just open or close the stand to fit your phone (including phones with cases). It's a print-in-place model,…
Let your phone relax to the max :) Flexible fabric was created with my 6 KByte endless fabric Printing Printed in PETG / 0.3 layer height PLA should work too (needs proper bed adhesion) Don't use supports or brim (would be hard to remove)…
A Simple Fold out Handheld Fan This fan has been designed and created for the contest, but I have found it quite nice to fiddle with too, so ig it doubles as a fidget toy. The Design is made for 7 blades and such the axel piece is also…
CHESS VOYAGE FEATURES TWO NEW PIECE DESIGNS *for standard and magnet versions only What is “Braille Chess” version? Braille chess is a specially adapted version of chess designed for visually impaired players . It follows standard chess…
The original model by RealEmmettS came in three sizes “ S, M, L”. Even the large size was too small for current large smart phones so I created an XL size. Please read the included PDF for additional print info. Please hit the like ♥ and…
Protusion from original Voron 0 spool holder is getting in the way? Too much work to remove it and leave 1 nut hanging loose inside the frame? Then you'll need this Voron 0 Foldable Spool Holder! Features Keeping the dimension & look of…
The foldable tablet stands I printed so far from printables didn't move and were all printed together, so I remixed the one from Thingiverse which is meant for phones and scaled it up to also hold tablets. Printed with an Ender 3 V2 Neo…
Complete redesign inspired by Holuboy 's Gas Can Stove Stand . Suitable for ~90 & 109 mm gas can canisters, e.g. C260 or MSR IsoPro. Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany ,…
A simple, foldable book stand that completely prints in place. Available in multple size. (mentioned in filenames in millimeters) Supports are required for two small areas as shown in the picture. All tolerances are 0.4mm. Use a small…
I wanted a minimalistic, adjustable and foldable stand for my Ipad. Did not find exactly what I was looking for so I did a minor remix of this one. Works perfectly! 1 file, prints in place, no supports. Standard settings. Prints in less…
This elegant, compact (15cm tall) folding dice tower takes up very little space on your gaming table, and is easy to store and transport. Two versions are available, with or without magnets. The version with magnets (requiring four 8x2…
✌ Angles Foldable Phone Stand. Suitable for smartphones and tablets! Features: Foldable Two different angles Print in place Portable Suitable for smartphones and tablets Perfect for travelling ✈ ;) Print Instructions: Layer Height: 0.2 mm…
This project is a custom-built foldable long-range FPV drone designed for efficient, extended flight times of up to 18 minutes. The frame is entirely 3D-printed and incorporates a unique folding mechanism for easy portability. The drone…
Welcome back guys! I needed 13 prototypes to get to this final model. It's a tiny catapult that has the size of a credit card. It is easy to print an fully functional. There is one model with a link to my youtube channel, if you print…
The source marked this model as adult content.
I am an avid mountain biker and have an appropriate bike. When I'm not rocking the trails, I ride the bike to work, or sometimes in the city to shop. Here it annoys me that I always have to lean the bike somewhere or lay down. So I have…
Suggested print settings for the Bookmark version 2 (NEW): Layer height 0.2mm. Infill 80%. Perimeters: 5. No supports are needed. Suggested print settings for the Portable version 2 (NEW): Layer height 0.2mm. Infill 15%. Perimeters: 5. No…
Updated with 2 longer arm models. Now with better reach to scratch the back! I designed this compact, foldable back scratcher to place in car. Printed in PETG at 50% infill.
Foldable Travel Hanger A foldable low profile travel hanger for men and women. All parts are printed parts so there are no additional screws or nuts needed. Use a slotted screwdriver to get the screws in (they fit in pretty good even…
Supports: No Infill: 20 - 50% Walls: 4 Layer Height: .2mm Nozzle: .4 or .6 ( works best on .4mm nozzle) Print-in-place design. Move the arms around a bit to loosen the joints at first. No supports are needed. I used a blurring tool to…
The walls are 0.8mm thickness, I printed with a .6mm nozzle and Cura print a only one 0.8mm wall Top/bottom line direcctions: [0,90] (Cura)
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — A print-in-place foldable clothes hanger. It can be printed on a standard-sized fdm printer (220 x 200 mm). It folds…
This is a model of the Predator Shuriken as seen in the AVPs and the Predator. This is a second version and is redesigned be my to be “fully” foldable. I also added a seventh blade so it is now little different then the original, but the…
Clicky karambit, but with no overhangs. I highly recommend using the 3mf with negative parts for the M3 nuts to recess into. I exported it from Orca Slicers, and it unfortunately might not work in Prusa Slicer.
This stand is a modified version of the awesome model here: https://www.thingiverse.com/thing:3146835 (medium size). I made some minor tweaks for improved strength and stability without increasing the overall height. Added some upstand…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I searched (and searched and searched) for a laptop stand to meet my needs, but…
Important: The gaps in the model are 0.2-0.3mm wide. It is recommended to check your printer's tolerances before printing this. If the gaps are too small, set a negative XY-compensation setting in Prusaslicer to increase the gap sizes.…
Variants This box has two versions, with and without perforated long sides and bottom. Assembly list of non-printed parts 12 pcs - metal axis 36( 35 )mm x (2.8 - 3)mm or M3 screw with internal hex head 12 pcs - 20mm M3 screw with internal…
30mm Foldable Cube that is printed flat and then folded into shape. Prints fast and all the sides of the cube are smooth. Can be used to explore the properties of a platonic solid or can make an LED light. UPDATE: K12 Lesson ideas for…
It can be printed in place or in two parts I don't recommand using PLA, it will slowly through time and uses deform until it won't fit together.
I needed some clothes hangers so I designed these neat foldable ones which fit on a 22x22cm Ender 3 build place. No supports are needed for this print. I recommend printing it in PLA with 4 walls and 5 top and bottom layers at 0.2mm layer…
Foldable tablet stand with all parts 3D-printed. The tablet can be positioned in 4 different angles. Each stand needs 4 lock pins. If there are problems inserting the locking pins, verify the roundness of the holes by using a 6 mm drill.…
Deutsch: Druckempfehlung: Das Modell am besten stehend drucken , damit das Scharnier und die beweglichen Bereiche möglichst sauber funktionieren. Englisch: Print recommendation: For best results, print the model standing upright ,…
Remix of this model from Thingiverse: https://www.thingiverse.com/thing:6087789 added the ROG logo to it
All robot vacuums have a virtual wall . But what if the vacuum is already cleaning and the kids’ room floor is full of LEGO or toy bricks? This foldable wall acts as an emergency barrier – just drop it on the floor and save the toys (and…
What is it? It's a drinks (beer) carrier that can hold four standard-size cans and/or bottles and can fold down for easy transport, can lock down with magnets. Great for taking beer to parties, sporting events or drinking it alone in a…
As I broke my Firemaple's stand, was looking for similar printable model, with no luck. It is designed close to original part. It should fold to fit inside the pot. Here some specs from their website: With the Canister Stand, it's easy to…
New: Adapter for stacking Crates (S) 150x100x55 mm or Double crates (S) 150x100x105 mm twice on the Palette (XXL) 242x202 mm or direct on the Crates (XXL) 240x200 mm with her top cover to be more rigid. Upgrade V6 is out ! New shape, save…
AKM scale model in 1/6 size Features: Working charging handle, removable magazine, folding stock Items required: Ballpoint pen spring, Piece of filament as a pin for the stock and mechanism Print settings PLA 200c, Bed temp 60, auto…
Our new foldable Christmas tree! Please let us know what you think of this year's version! And to all of you… Happy Holidays and an Amazing New Year! Used Filament: This model was printed using ROSA 3D PLA-Silk Gold The ROSA 3D team was…
Description : Introducing a practical and convenient solution for on-the-go device use – the Print-in-Place Foldable Mobile Stand. This 3D printable product allows you to effortlessly create a sturdy and foldable stand for your…
A Cargo Shipping Container as easy to print foldable model. Key Features: Highly Detailed : Accurate representation of a 20ft shipping container, capturing all essential features and dimensions. Easy to print : prints on all standard…
FOLDX - Foldable Multi-Tool - Single tool holder Join the new FOLDX community Facebook group for makes, upgrades and help. First designed this first as a foldable utility blade holder with inspiration from the classic Swiss knife folding…
Easily printable and foldable bicycle model. I recommend printing in 160% scale. Combine the colours as you like.
This project is based on the idea of this stand: https://www.thingiverse.com/thing:73314 but completely redesign by scratch. It fit my new ipad air 2019 with cover, so it should fit also in other tablet with max thickness of 11 mm. You…
The model doesn't need any hardware to assemble. If you want a stronger bind, you can glue the pins to each other as shown in the pictures. Print settings: PLA 5% infill gyroid prusa mk4s For the model you need to download each STL file.…
Update: I added a Relief version. Also added new version for all sides with filled handles.
Used parts for shafts: 2x Threaded rod M5 length 170mm 3x Self-locking nuts M5 for crank and shafts 5x M5 nut with integrated washer, which are heated and sealed into the bushings and crank 6x M5 nut ring (d12/w3) or nuts with reduced…
Reuploaded from: https://www.thingiverse.com/thing:5366891 Scarab of Ammit from the TV series Moon Knight (Disney+) that can fold wings. Included two version, one with just the body and the wings so the wings can move freely (NO MODS) and…
This is ideal for putting on your desk or the airline tray, and it also folds up nicely to put in your backpack or back pocket so you can take it wherever. Print instructions Note that the gcode file will print with support under the…
Plegable surgical mask case. No supports. Easy print. Insert pin into the hole. If pin don´t fits perfectly -due to tolerances at print-, glue (with cianoacrilato if possible) the plain side of the pin into the hole. If plate adhesion…
![#0032 BuildX Foldable Laptop Stand [2 more sizes added]](https://media.printables.com/media/prints/243229/images/2445589_f8094fa9-7411-4494-90eb-b0034760095b/20220829_124921.jpg)
