1,229 models
Have you ever wanted to obtain the highest level of achievement known to man also known as being “Forklift Certified”? Well this RC forklift is meant to help make that dream a reality. This Mini-Fork is front wheel driven with rear wheel…
I need to service my fork recently and I found this ( https://www.thingiverse.com/thing:883685 ) on Thingiverse, so I print it out and unfortunately; it is too big and it does not fit my cheap shock. SAD... I then fire up my trusty CAD…
So this is a remix of https://www.printables.com/model/207534-card-sized-knife-fork-toothpick-kit made by https://www.printables.com/social/242064-ruben-martins/about I love things that fit in Altoids Tins. I made it so it fits in an…
Mini cargo cage for bicycle fork Easy to print and lightweight cargo cage for the fork of your bicycle. Parametric design! I needed two cargo cages for a longer trip with my mountain bike, but didn't like the heavy and large designs I…
I lost my air cap from my FOX Float 36, so I printed a new one even lighter than the originals and you can choose the color! Print with 0.1mm layer height in specified orientation
I redesign for example the blower but I kept the original vertical duct and the air filter. The original blower did not have a shell all around. The top was not strong enough to support the vertical duct. This is why I redesigned a new…
The goal of this design was to make a 3-bolt water bottle/bikepacking cage mount that could be secured to the 43mm diameter lower tubes of my mountain bikes' suspension forks. I wanted it to be a very secure fit, strong, lightweight,…
Fork for stringing rubber bands Loom Bands
I didn't like how the buffer held on (barely) to the printer, doesn't work with the loading fork, or was in the way when printing without the MMU. After trying other solutions without satisfaction, here's my attempt to fix all 3! More…
The Gerber Principle knife comes with a clever modular sheath that allows the user to choose between two different types of belt loop, and they attach to the rest of the sheath using a locking plastic spring fork. The one I bought was the…
Veryy easy to mount: Stick the logo on the plate. Unscrew the 4 screws holding the front indicators. Put the plate in place. Replace the 4 screws.
I will up load a adper to fit this specific toy that glue onto the back of forks but if want you make your own adapter to fit a different model print pla + or petg
BUILD PLATE Adh Brim line count 10 or more SHELL wall line count 4 pattern concentric I didn't use any support I didn't use any infill
Easy design and easy print. The attached models take a size 3.5 metric woodscrew, ideally 3.5×35 or 3.5×40 with a countersunk head. Of course size 3 or size 4 (with a little force) will work nicely, too. The basic model, where also the…
Originally printed with PLA and organic supports. But this version was broken after two days of snow-work. Therefore I uploaded updated V2 version that I printed with PET-G and glycoid infill. Printed as standing version because of…
The model features a tight fit for the AirTag to hold it securely in place. The outer circumference has a precise fit. I recommend wrapping it with 1 layer of tape to reduce slippage. The model has been tested and holds securely in place.
Print in ASA, smoothen with Acetone and put into dishwasher to be sure to have a 'clean' surface.
Currently trying to grow my Youtube. Subscribing would mean a lot! https://www.youtube.com/@cheezylabs Summary I created this little kit card that assembles into a little forklift - complete with a mini palette! The forks can slide up and…
Cutlery Kit Card – Knife, Fork and Spoon. A compact cutlery kit card combining a fork, spoon and (child-safe knife) in a single, lightweight design. Created with a focus on comfort, compactness, and fast printing . The card format keeps…
Print-in-place and Articulated Surprise Egg #2 - Tiny Fork Lift 'Making of' video: *edit 04.14.22 added high-poly egg and a high-poly egg with magnet lock (fits 3x1mm, add a drop of glue) Stresstest your 3D Printer by printing this tiny…
This forklift prints in one go, with no supports. Once printed, all you need to do is remove the fork support pillar. The wheels spin, forks slide up and down and the fork mast can recline to prevent cargo from sliding off the forks…
this is a perfect gadget for your wallet. If you need a knife or a fork in your brake or maybe a toothpick, this can be very helpful. Needs only 2.1m with 100% infill
Spoon & Fork Holder – No More Messy Tables! Have you ever stirred your coffee and had nowhere to place the spoon without making a mess? Or maybe during dinner, you didn’t know where to put your fork without staining the tablecloth? Not…
Forklift with forks that can be raised and lowered, and wheels that turn. The body and forks are print-in-place, the wheels print separately and are snap fit into the body. Printing instructions: No supports necessary. I have never gotten…
A very versatile tool that should be in every wallet. It has a standard card side with slightly higher thickness (2.5mm), but I have yet to find a wallet that it does not fit in. It should be printed in food-safe(ish) materials, such as…
Zum deutschen Originaltext gehts nach unten! -------------------------------------------------------- Push your MMU3 on the next level! You have an original Prusa MMU3? THIS is your musthave! Do you have an MMU but you are annoyed by the…
Starting from the original model → https://www.printables.com/model/207534-card-sized-knife-fork-toothpick-kit/comments published by Ruben Martins I wanted to add a spoon to the kit I designed it using Fusion 360 and printed it in white…
Instead of buying kitchen tongs from the store, make use of your 3d printer and the forks you already have. Print instructions No supports needed. Just use a brim.
A simple AirTag holder for a 34mm/35mm/36mm/38mm diameter MTB fork like Rockshox or Fox. If you have a very well calibrated or very true to size printer, the part fits perfectly - like my Prusa Mini :) My holder has not moved after quite…
A 3D printable switch plate holder that prevents the switch plate from bending while inserting switches onto the pcb, making the process a lot easier. Variants There are several .stl files of the switch plate holder with different…
I made this pallet rack for my RC 1/14 Lesu Forklift. It’s built more for function then scale looks. It has (5) rack positions. The rack is held together with M3 X 12 or 14 pan head screws. This rack will hold a bit of weight and is very…
--Updated V2 Available Now!-- Features 3mm alignment pins and better clearance! Use standard nails as alignment pins for more consistent driving. This is a fork seal driving tool for use with 48mm diameter dirt bike forks. This was…
This simple but clever print might come in handy one day. It includes a fork, spoon, knife (with a serrated edge), and a toothpick. Additionally, it comes with a clip that is made to hold everything together after its been disassembled.…
Up to 3 Adapter to mount it properly. (I use cork tape to keep it perfect in place.) You can use cable ties or 15mm hook-and-loop band. CargoCageForkAdapter.stl is for a 43mm fork. Let me now if you need a different diameter. Update:…
I used PLA+, part cooling fan at 50%, 10 walls, 15% infill. Walls are more important than infill. For heavy use, print in Overture Easy Nylon or PolyMaker CoPA at 100% infill, then anneal and moisture condition. STEP File:…
Who doesn't like yellow forklifts? Everyone loves yellow forklifts! Simple model to print and make. Working steering and fork lifting system. To assemble it you only need a little glue and some wire for the fork system hidden in the rear…
Knife and fork sidewinder for camping and outdoor trips. You can also just use it as a fidget toy! Simply flip it out with a quick upward move of your hand, or slide the left side up! The blade and fork are easy to replace because…
Mount an Apple AirTag into a round 32-34mm steerer opening. I only recommend using TPU, and have only personally used 95A TPU. Forks Tested the fit on the below forks. It may fit other makes/model/years, but I would suggest measuring the…
Use plenty of solid top/bottom layers when printing. I used 6 solid layers PETG, then 60% full honeycomb infill and had no issues with durability. The models are all tested!
Small fork, easy print, and highly practical model! They are printed with PLA on 0.12 (can be 0.2 if you're in a rush). can be printed in <5 minutes. If your filament is not anti-bacterial, I suggest you use them only once to avoid any…
Inserts into the yarn guide to provide a tension assist for those of us without a magical (or trained) hand to manage tension on the yarn while knitting away.
I recently attended bike tech workshops through the Professional Bike Mechanics Association (PBMA) where I received training in a whole bunch of different things from many different brands. I was constantly thinking "I bet I can 3D print…
An upgrade to Monorim MX0 to allow stable rides without wobbles way beyond the 100kmh barrier. Needs sheetmetal manufact
This is an ultralight double ended spoon/fork for outdoor picnics. If you always keep it with your keys, you will never forget it, and you will always be able to enjoy your lunch. It is only 7cm long.
Moin I Print the FLEXI kitchen knife, so i need a FLEXI kitchen fork! Or the easy “DIET FORK” And here are the results https://www.printables.com/de/model/502349-flexi-kitchen-knife
A simple cake fork for decorative serving. It’s not recommended for eating, as plastic materials may be unsafe for contact with food. Ideal for display or decoration.
Designed for the Zeb but should work on other 38mm forks. Confirmed for Fox. Works as good as any commercial tool. Prints without supports. Use high infill. UPDATE 9/2023 - By request, I thickened the tool's outer flange by 1mm. This is…
When performing air spring maintenance on a Fox fork, Fox specifies part number 398-00-657 Tooling: Bullet, Sealhead To Shaft, FLOAT NA 2 This tool can be really tough to find, even when you work for a bike retailer. So... 3D printing to…
Cat hair fork. 100% infill, Prusa Mini 0.15 Quality preset.
I came up with this after getting my fork back from the shop for a rebuild. the cap covering the rebound knobs was put on a little too tightly, and was covered in oil from the service, making it nearly impossible to get off, which is why…
My best-friend-besides-my-spouse was over lately and I had acquired a 3D printer since the last time she'd been over, so I gave her some starter URLs on the various sites for things she might want me to print and we had a pretty decent…
A simple keychain for a forklift. Same style as my other keychains: Bike https://www.printables.com/model/129704-bike-keychain Car https://www.printables.com/model/129768-car-keychain Buggy…
Quickly align your stem and handlebars with the front tire in a accurate-ish way. Place it on the handlebars, get it roughly centered, and use the top groove as a “sight” to center it on the front tire. I saw the original on the Berm Peak…
Ersatz-Zinke für den Bruder Linde Gabelstapler 1:16. Nachgezeichnet nach 2D Scan. An der Spitze der Zinke einseitig verjüngt. Für die andere Seite bitte gespiegelt ausdrucken. Verstärkt. Passt besser als das Original. Auf den Fotos sieht…
I love what ProfessorBoots ( https://www.printables.com/@ProfJohnny_823077 ) has given to the 3D community. Please support ProfessorBoots for all of his work to make these models come to life. It does take hundreds of hours to make these…
Update: v7 has an internal nut. How it works: Simply insert the StealthTag into the stem of your bike's front fork. The adjustable diameter (editable in Fusion 360) ensures a snug fit for most bike models. Once inserted, secure the two…
This is a pitch fork for Bruder tractors
An oldschool little devil. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis seen in one of the images are available on my Patreon…
This model is compatible with the lego system.
Print the individual printing plates one after the other (already sorted by color) Start by assembling the body and then insert the seat there. For the wheels, you need 2 nails or something similar as an axle. Push the axles through the…
After lots of requests here is the ELS style fork and receiver. I personally would not trust this to hold my gear on my race belt but a lot of people seem to think it shouldnt be a problem. So here you go… Good Luck!! NOT TESTED - USE AT…
Fork and Spoon for a doll house, I printed with 0.15 layer height, 50% fill
This is a full-size fork you can print and use. Print multiple for a stylish and modern set of forks. Be aware that with PLA it is a little flimsier than a normal plastic fork, so you'll want to only use it for light food. Category:…
Hi, I was in need of a fork for an upcoming project of mine. The few fork models here on printables did not find my liking so I made my own. It is a remake of one of my real world forks. I used Fusion 360 an two photos to recreate it as a…
Easily measure and set sag on your mountain bike fork. This is based on a previously commercially available product called the saggle, which appears to no longer be available. You can use a regular ruler of course, but this is more fun!…
New and improved! Some have asked for one that is chamfered and stronger. So here it is. I've also included the f3d file. -------------------------------------- My 701 had the fork cables banging off the forks. Plus I wanted them off the…
This fork cover is compatible with the Vespa PX series and is intended to replace the original one. Print it with PETG or ASA with a minimum 30% infill. The model is comp with multi material printing so you can print the text in different…
Here you are the 3rd part of my Jawa-ČZ 250/353.02 build. Hope the 2nd part was fun for you :) https://www.printables.com/cs/model/751984-project-jawa-cz-kyvacka-25035302-part-no2-engine-c Today it is complete neck and front fork covers.…
The dimensions and overall shape of the lucet fork are based upon the guidance of this video (starting at 0:55): To learn how to use a lucet fork you can look into this video (starting at 0:45): Printing information: Supports can improve…
3-hole anything rack ready to be mounted wherever you can put it on your bike! I also made a 2-hole for smaller objects like tubes and oversized water bottles. For strength, I'd recommend about 5 perimeter layers. You could probably get…
Another lucet, with a shallower angle on the ends of the tines, and a decorative fleur de lis! Some people prefer the shallower angle to the curlier one on my other lucet design, though the other one is pretty! :) This one has a bonus – a…
Siku 1311 Forklift truck (1:87 toy model) comes with one pallet. That is not enough for any kid 😉
I wanted a tool I could use repeatedly on a bunch of bikes. I also wanted to be able to drop it in from the top and put the stem/bars in place with one hand. I'm happy with the first iteration but may tweak it after some shop use.…
It has been designed for a 15mm axle and 110mm space. Designed for 21mm drop outs, so it should be compatible with all the BOOST forks. UPDATE : The V5 version is 5mm taller as requested on a comment from Thingiverse. IMPORTANT: in this…
Print all or print just the biggest organizer
This practical folding cutlery set includes a spoon, fork, and knife, connected by a central screw mechanism. Thanks to this design, the utensils can be easily folded into a compact shape. Overall, it’s a simple, lightweight, and…
This is a support for person with disabilities to use eating utensils. It is a multiple support where to apply fork and spoon, It is a single piece that fits the shape of the hand and where you can fit different types of forks and spoons,…
It is a really simple design and based on the original from DELEKS. The original Fusion 360 project is included as well as STEP data, which can be used directly in Prusa Slicer. All parts are printed in ESUN PLA+ with 0.15 layer…
The Dummy Fork is an essential companion for any scenario that requires dropping the fork from a bicycle, enabling complete removal of the fork while keeping the handlebars and headset spacers organized. The Dummy Fork installs into the…
The mount comes with different offsets in order to achieve a 90-degree fit.
Small and quick Replacement Print for broken Forklift Forks Printed with PLA and 15% Infill
Vidlička pro rybářsky prut
Some useful tools regarding knitting on a CSM: Heel fork Heel fork weight box (fill with BBs, about 250g) Main weight box (fill with BBs, about 1700g total, use M6 threaded hook) CSM crescent tool small needle box (cylinder/ribber) bigger…
More sizes of fork hooks for the IKEA Skadis universal hook system by CSD_Salzburg.
when installing new dust seals in Fox 36 Fork use this tool to perfectly align them. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Hand Tools
A spanner to remove the threaded inserts at the top of your Suntour MTB forks for maintainance
Pretty much a straight-up copy of the Newmen TC adapter because that's the simplest, most elegant solution that I've seen. In fact, the Newmen adapter is inexpensive and such a nice fix I'd suggest you just buy it from them and give them…
designed from scratch but inspired from Kamil G's Air Cap. print in given orientation with 0.1mm Layer hight to give the cap a nice finish Print this thing to unscrew the air cap:…
Simple / minimal hair fork. I've also provided the STEP file so you can more easily tweak the design if necessary. Print instructions 0.15 mm Quality (Layer Height) Prusament PETG No Supports 15% Infill 3 Perimeters Ironing No Brim
Model of forklift. Every parts are glued together. Im new with prusa and prusa slicer, so if you will find any faulty settings please let me know. Check my other model. Thank you
Made to fit on bars from toddler bikes to 35mm, and those with wider stem mount spacing.
This is a bale fork for Bruder tractors
Motorcycle Fork Seal Driver Tool - Fork seal driver split Ø 41mm Honda Transalp Africa Twin - BMW f650GS Premi Corteco/Paraolio Forcelle Motorcycle Fork Seal Driver Tool Suitable for Ø41mm Slide pipe Resize to adjust dimension If you…
Ideal fork cage for bikepacking. Perfect to mount luggage on the fork.
Simple Fox Fork Topcap Socket, 26 and 32mm, flat bottom, ½" drive. Be aware that the topcap should be tightened to 25Nm and some 3D printed plastics may fail at that torque I printed it in Ankun PLA+, since PETG Did not work.
