Outdoor holder for GETI GMD01 motion sensor
Outdoor holder for GETI GMD01 motion sensor. Includes cutout for zip ties. Rainproof with drainage channels.
- Downloads
- 5
- Likes
- 0
- Rating
- 0
43 models
Outdoor holder for GETI GMD01 motion sensor. Includes cutout for zip ties. Rainproof with drainage channels.
While experimenting with the Two Way Threaded screw as a way to adjust my printer calibration I realized what an awesome fidgeting toy this would make, if the nuts could never leave the screw. Therefore I quickly created a variant, which…
*3D Printable Hand Fan: Simple & Customizable* This 3D model provides a base for creating your own unique hand fan. It features a segmented, curved design with ribs, making it easy to add your own designs. After printing, you can decorate…
An easier to spin and fun to play with version of the amazing Gear Bearing by emmett. Thank by the way! Customized version of https://www.thingiverse.com/thing:53451 Created with Customizer!…
I originally designed and sold this on my Etsy shop, but I think it's time to share it with everyone. PDF of printing instructions included. -Version of Animal trays with and without 5x1 magnets. -Several different varieties of card trays…
Made it myself as a test on how to 3dmodel print in place bearings. It turned out quite well when printing it with a 0.6mm nozzle.
Instructions: Print the nuts Print the TestBolt (if you want to check the fit) Print the main bolt, but pause printing about halfway through to add the nuts. NOTE: Every time I've resumed the paused print, I've missed a long strand of…
Tento model vytvořili žáci Střední školy průmyslové, technické a automobilní Jihlava pro soutěž 3Déčkuj. Model byl vytvořen pro použití ve výuce na ZŠ a SŠ pro názornou ukázku energetiky v ČR. Model je interaktivní. Pod jednotlivé…
Syringe / Luer to StageTip addaptor Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Polymaker Polyflex TPU Black Category: Biology
Ochranné a pohyblivé uložení kabelu mezi pevnou a pohyblivou části. Oba modely jsou stejný liší se tím že “retez v4.3mf” je se symbolem žlutého blesku určeny pro tisk s MMU. úhel ohnutí mezi dvěma články je 45 stupňů. Na obrazcích vidíte…
Ein einfacher Laubsägetisch passend für die Benutzung mit Festool Zwingen. Die einfachen Klemmen der normalen Laubsägetischchen passen nur bei recht dünnen Tischkanten. Gerade wenn es mal ein wenig “dicker” wird, wäre eine normale…
Distanční zarážka energetického řetězu pro Two Trees SK1. Materiál PET-g
It's a ball with several distinct features for touching. Every single one feels different. Send your hands on a jouney! To print the ball, I sliced it in 2 with a dovetail connection and then assembled the 2 halves. Category: Sculptures
I lost my Serengeti sunglasses nose pads and found out they are 20$ each so I modeled a quick nose pad. printed them out in TPU and turned out great. its a tight fit so they will not go off and doesn't need any glue
Einlage für den Sägetisch der Metabo BAS 261. Beim Kippen vom Tisch auf Freigängigkeit vom Sägeblatt achten.
Material PLA+ Layerhöhe 0,2 mm / Infill 40 % / Support 0% Gutes Gelingen und über ein Like würde ich mich freuen. Good luck and I would be happy about a like.
I modified this design to create a cut-out to use a magnetic wireless charger. I had added a magnet to my phone with this product: https://www.amazon.com/gp/product/B09BZ17JM7/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&th=1
I designt this model in blender for my girlfriend you can print in pla or in petg translucent hope you have fun
Material PLA+ Layerhöhe 0,16 mm / Infill 25 % / Support 0% Slicingtoleranz “EXKLUSIV” Mein Tipp: Drucke Teile mit Gewinden immer mit Slicing Toleranz „EXKLUSIV“ (Cura). My hint: Print threaded parts with slicing tolerance “EXCLUSIV”…
This adaptor allows to mount 96 200 µL pipette tips onto an Eppendorf twintec full-skirted 96-well plate. We use it for large-scale StageTipping (i.e. salt removal from peptides, see https://doi.org/10.1021/ac026117i) but also other…
This is an Effector for delta printers that are using magnetic rods AND that also are using V6 hotend with the Volcano block. Can be used with: Original Kossel Z Probe BLTouch Sensor In both cases you have to download its corresponding…
Simple clip adapter to mount a laser pointer onto a camera's hot shoe - helpful for targeting objects, as required in astrophotography. Sizes The design was made for laser pointers with diameters from 10 mm up to 20 mm. At the moment…
Material PLA Layerhöhe 0,25 mm / Infill 20 % / Support 5% Zusätzliches Material / additional material: Sechskantschraube / hexagon screw / 2 / M6x20 mm DIN933 Mutter / nut / 2 / M6 DIN934 Gutes Gelingen und über ein Like würde ich mich…
Coin designed for Pokemon Go community day. Coin reflects selected Pokemon for community day April 15th. Front shows Togetic and back shows the Togetic evolution. Glue coin halves together after printing. Paint if desired. Additional file…
Anschlag02: Material PLA+ Layerhöhe 0,2 mm / Infill 50 % / Support 5% Knebel: Material PLA+ Layerhöhe 0,16 mm / Infill 100 % / Support 5% Slicingtoleranz “EXKLUSIV” Mein Tipp: Drucke Teile mit Gewinden immer mit Slicing Toleranz…
Just a simple “perfect fit” remote control holder for RCS311. inner height: 18mm width-middle: 43mm width-bottom: ~38mm
Alle Teile außer 05_P1 und 05_P11: Material PLA+ Layerhöhe 0,2 mm / Infill 20 % / Support 5% Teil 05_P1 und 05_P2: Material TPU95 Layerhöhe 0,16 mm / Infill 80 % / Support 0% TPU A95 von 3DJake Dieses Filament ist auch druckbar mit…
Diese Rankhilfe für Pflanzen nutzt positive Worte, um das Pflanzenwachstum zu fördern, und hat einen Trichteraufsatz für gezielte Bewässerung. Sie verspricht beeindruckende Ergebnisse und lädt dazu ein, sie auszuprobieren. This plant…
This is a simple, easy to print fidgeting gear keychain. Print Settings: Printed with 0.4 nozzle, 0.20mm layer height and 25% infill in both PLA and PETG. No supports necessary. Assembly: Print all four components, place the gears on the…
Calling all Pokémon GO Community Day organizers and passionate trainers! Elevate your Togetic Community Day meetup with these captivating 3D-printable Pokémon-inspired coin models. Resembling the iconic coins used in Pokémon TCG matches,…
Nachdem ich bei Gehrungsschnitt mit geneigter Säge immer wieder in meine Anschlagschiene geschnitten habe und dadurch die Alu-Schiene immer kürzer wurde, habe ich dieses Austauschteil konstruiert und eingebaut. Material PLA Layerhöhe 0,2…
Flaschenhalter für die Standard Trinkflaschen aus der Zoohandlung (Durchmesser 50mm). Wenn man sich ein Gehege für die kleinen Nager z.B. aus Holz gebaut hat, kann man den Halter wunderbar festschrauben.
Hasbro Clone Helmet Targeting System functional
PLEASE LIKE AND FAVORITE IF YOU ENJOY THE MODEL! A badge of the Togepi egg pattern for CD '23! This one should be easier to print.
Magnetic base. Uses 8 X 8mm neodymium magnets. Printed in TPU.
Dies ist eine Vorrichtung mit 150mm Länge um einen Tisch an einer Wand abnehmbar zu machen. Ich habe es aus PETG mit einer 0,6mm Düse gedruckt, diese hatte ein 0,6mm Übermaß produziert. Da dann die Teile nicht mehr ineinander gepasst…
Stichsäge-Einlegeplatte für Bosch GST 160 CE / GST 18V-LI S Grunplatte 240 x 200 x 10mm gedruckt in PETG Perimeter 5 Fülldichte 25% - 50% Füllmuster Gyroid ohne stützen benötigt werden : 4x Senkschrauben M6 x für die Befestigung an den…
Tactile image of asexual reproduction by vegetive propagation. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to texts (if literate…
Auflageeinsatz Scanobjekte aus TPU95 für den Auflagetisch Das ist ein sinnvoller Zusatz zu der Auflage mit Standfüssen https://www.printables.com/model/1122868-auflage-mit-standfussen-fur-3d-scan-objekte , um die Bauteile auch sicher und…
In order to practice with my air pistol in the basement, I constructed a simple shelf to safely store the air pistol. I designed it so that the round magazines for the pellets, the air cartridges and the container for the pellets all have…
it is a small little USB sized fan great for fidgeting or cooling yourself off! for the fan blades print with supports only touching build plate 15% infill on FINE mode NO RAFTS, for the lock washers print on FINE mode RAFTS 15% infill,…
Žáci si vyhledají data o zastoupení zdrojů primární energie v jimi vybraném státu. Data zpracují, navrhnou stromový graf poměrného zastoupení zdrojů primární energie a graf vytisknou.
Auflageeinsatz Scanobjekte aus TPU95 für den Auflagetisch Das ist ein sinnvoller Zusatz zu der Auflage mit Standfüssen https://www.printables.com/model/1122868-auflage-mit-standfussen-fur-3d-scan-objekte , um die Bauteile auch sicher und…