1,929 models
A set of Gothic or Secret Society Rings. Resize to fit your finger. They are all set to approx 22mm ring finger size in gcode. Set rings in a group and resize one to resize all using ruler.
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
Decorative Gothic Skull with horns Door Knocker
Print approx. €4.80–€5.86 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for one variant
What? A holder to align a small plastic funnel with the body of a 15ml dropper bottle for paint transfer. Used to help transferring paints, as in this tutorial from FauxHammer Why? Because: You want to transfer your Games Workshop paints…
Print approx. €2.50–€3.06 excl. taxPreliminary estimate for one variant
Gringotts Bank Dice Tower - A cool dice tower I found on Thingiverse I added in a little extra support on the back nothing to fancy just to help it print a little better. The STL file is not scaled up but should roll a standard D20 just…
Print approx. €17.12–€20.93 excl. taxPreliminary estimate for one variant
I have a Gotek drive and CF-IDE card reader for my Amiga 4000. As I already use the 5,25” bay for a CD-ROM drive, and one of the 3,5” bay’s for the original Floppy drive, I needed another solution. My A4000 has a standard height floppy…
Print approx. €2.32–€2.83 excl. taxPreliminary estimate for one variant
Print in 30 % fill The Gcode include manual support (for easy remove)
Print approx. €7.93–€9.69 excl. taxPreliminary estimate for one variant
Hi all, Design: This Gringott's bank is designed in Fusion 360 based on photos from movie. I hope that you can see the shape in it and in case I added STEP file in case someone would like to remix it with masonry pattern, add dragon on…
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant
This is my solution for the Gotek External Interface and floppy disk emulator. For the interface module i have made a simple enclosure for protecting the hardware. For the Gotek emulator i have made the Oled screen version with the two…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
Кронштейн для готической лампы
Print approx. €5.22–€6.38 excl. taxPreliminary estimate for PETGSource material: PET
Set of five fantasy neo goothic architecture pictures (two colours) 20 cm wall art matrix for graphics or frottage
Print approx. €2.74–€3.34 excl. taxPreliminary estimate for one variant
A unique model of an off-road vehicle, inspired by the dream car of everyone - who wouldn't like to dive trough the desert with the G63 AMG 6x6? Now you can too, at least in the sandbox. The icing on the cake: make it as long as the…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Needed a case for my dual Gotek drives. The screws that come with the drive aren't the best at interfacing with the drive itself. I used some other screws that did a better job. You can see an example of the screws in the front image.
Print approx. €9.10–€11.12 excl. taxPreliminary estimate for one variant
I suggest printing slowly with a matte PLA in order to hide layer lines. Almost all the parts require glueing with super glue. Print with organic supports.
Print approx. €11.16–€13.65 excl. taxPreliminary estimate for one variant
100x160mm signs, inspired by the music of Anthrax. Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frames , into which this and the rest of my sign collection fit.
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for one variant
Le modèle est entièrement imprimable à plat , ce qui facilite grandement l’impression et le stockage. Une fois assemblé, il se transforme en une structure en ruine détaillée, parfaite pour enrichir vos parties avec des lignes de vue…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
This version is for 18mm shelf if you want another shelf thickness, you can contact me for posting updated file.
Print approx. €10.22–€12.49 excl. taxPreliminary estimate for one variant
Keychains in various versions. Dualtron Gotrax Hiboy Hiley iscooter - 3 colors Kukirin mi Nami Ninebot Niu Razor Sagway Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
This is a wireless hand control box for ONSTEP telecscope GOTO system. Note that there are various momentary tactile push button switches, and one needs to modify those caps for his own choices. (e.g.,…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
This is a wired hand control box for ONSTEP telecscope GOTO system. Note that there are various momentary tactile push button switches, and one needs to modify those caps for his own choices. (e.g.,…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) THE SKELETON HEAD ROSE /…
Gothic Lanternt design. Without any support in printing. Important to use with led lighting. Print instructions Unassociated tags: gothic lantern Category: Decor Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 15
Organize your tools with a dark twist. This realistic, weathered skull features multiple slots for brushes, pens, or tools. A perfect blend of gothic art and functional desk storage. 💙 Enjoying the Freebies? I love bringing these concepts…
Decorative Gothic Dragon Door Knocker ** THIS IS NOT FUNCTIONAL ** no moving door knocking mechanism. it just looks like it.
Inspired by the elegant lines of Gothic architecture, the Gothic Throne Headphone Stand showcases your headphones in style while keeping them secure. The sturdy base prevents tipping, and the curved top preserves headphone cushions.…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is a Batman themed wall art / home…
Here is a model of an organizer for your knives, daggers, needles, and other everyday items... or simply for crayons, pencils, and pens :) If you're interested in the commercial use of my models, earlier access, exclusive designs or if…
A chilling gothic sculpture of Death arriving by boat, symbolizing the passage between worlds. The hooded figure, skeletal and solemn, guides his vessel through sculpted waves, holding a staff crowned with skulls. The boat itself is…
Gothic Lithophane Lamp I wanted to make my Mom a Litophane lamp for Christmas so I looked on thingiverse but none of them were just right so I design my own. I decided to go with a Gothic style design, something really easy to use the dry…
Gothic Bird Feeder Feast your eyes on this exquisite 3D-printed bird feeder, designed in an enchanting Gothic style. With its intricate arched windows and elegant architectural details, this bird feeder not only serves as a charming haven…
Hi everyone. I am P1lotz , a professional 3D artist. I have been working in the field since 2019 and specialize in creating articulated creatures, particularly dragons. With that said, let me present to you my new G othic Dragon! (Thanks…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) I am excited to share this unique display…
Print your own gothic sci-fi ruin city. Everything prints without support. Every level with a floor is separate with big pegs and holes to keep them aligned without glue. A quick and easy method for painting them:…
Today, I want to share a design of one of my patrons with you - this awesome dice tower was created using the terrain lib, so now you have a dice tower that fits perfectly to your tabletop terrain. A big thank you to the original creator…
One week after the initial release of the terrain generator, I published a big update. Many more options came in, like full buildings with all 4 sides (previously, only a corner ruin was possible). To give you some more buildings, I…
MegaXL Spigot SCAR The MegaXL Spigot SCAR (or Silly Scar) is a SCAR attachment for 16mm OD aluminum Nerf hobby barrels that stabilizes darts, is easy to attach and detach, is fully air-sealed, and it allows you to fire MegaXL darts off…
Original Post: 3d scanned by User @AgainstYou (Hans Peter). I thought It was super cool and wanted to make a big ones, but the resolution was too low. After loading it into Fusion360, I re-meshed the model and fixed some of the geometry.…
Vaso de planta modelo gota de água
The source marked this model as adult content.
19 Mar 25 - Added a new looped version that's much sturdier than previous models. Also changed the latch so the hinge was coaxial to the fillet. Overall, a more refined model than any of the previous iterations. 8 May 24 - Added beefy…
Dark. Mysterious. Absolutely judgmental. This Gothic Horned Kitty isn’t your average purring companion—it’s a stoic little guardian with curling horns, arcane markings, and a stare that pierces souls. Perfect for fantasy lovers, gothic…
Here are the files for the hanging version of my Gothic Lantern This is designed to have paper slips added to act as the screens, though I used some 3D effect plastic craft sheets which gave a cool effect. The Handle should be from the…
With the release of my first terrain library, I created some buildings for you. All buildings are split by the different floors so it's much easier to print. These files are available for commercial use for several of my patreon levels,…
This dice-tower contains of 2 parts: The tower itself and the yard. The tower snaps into the yard and is held in place by 3 small noses. For the door I recommend some support, everything else prints fine without support. I recommend to…
Decorative Gothic Gargoyle Door Knocker
This is my concept of bookends in style of Batman and Gotham.
This is the Pusi Negotiator . An unofficially designed negotiator for wave filters to be used on the xBloom Studio Omni Dripper 2. Brewing note: I recommend either this recipe designed by @pradyboy for Moodtrap beans, for use with this…
This is a Magic: The Gathering commander deck box I designed for my girlfriend. It comfortably holds 100 single sleeved cards with some additional room for tokens. The top insert in the photos has the singer from Ghost on it but I've also…
A vase inspired by a 1901 work by Eduard Stellmacher. I loved the design so I commissioned someone to replicate it as a 3D model for printing. It's not an exact replica but takes a lot of inspiration from it and adds a bit extra with the…
This 3D printable Gothic pen holder is designed to resemble the architectural details of medieval cathedrals. With its pointed arches, ornate columns, and intricate tracery, it combines functionality with a striking aesthetic that will…
Gothic Cross / Crucifixion in archway.
This dice tower is basically an update of this design: https://www.printables.com/model/372738-scifi-gothic-dice-tower Since there were complaints that the dice do not go through, I decided to increase the openings a bit to make them…
This guy has two Variants, as pictured below. V2 has a "tighter" cut so it can be printed larger, and on FDM it shouldn't require any supports as all: Printing instructions - resin Pre-supporting files is a royal pain in the ass!…
Backpack coming soon. Works with the original Dummy 13 frame. Two armor sets for the arms. Material Frame ABS/ASA/PETG Armor Any Layer Height First Layer .2 Other Layers .15 Infill 20% Gyroid First Layer Speed 25% of Default Elephant Foot…
This design includes all digits from 0 to 9 as well as letters A through E, allowing you to freely assemble any house number. Each character is shaped as a hollow shell with two round recesses on the back. These recesses fit onto matching…
https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a subscription service on MyMiniFactory, a tribe. I make miniature wargaming and roleplaying game terrain for your home 3D…
Gothic crosses are one of the many symbols of Gothic culture. The difference between a basic cross and Crucifix is that cross is a simple cross-shaped item without a symbol figure of Jesus Christ . Therefore, a Crucifix is a similar…
Gothic shelf or mirror frame for hanging on wall.
This is the Gotcha hand plant pot. This charming pot isn't your average planter – it's equipped with a clever trick up its sleeve. The plant pot employs the classic Hand Circle / Gotcha / Made you look move to encourage its owner to give…
A slim bookmark inspired by Bram Stoker's 1897 book Dracula. A quick and easy print, with no supports needed. Great for lovers of Gothic horror and vampire fiction. (I have a low-priced Patreon for anyone wishing to print any of my models…
Step into the gothic realm with this female warrior 3D printable figure . Clad in intricately detailed armor and wielding a massive battle axe, she stands poised upon a rocky gothic base — a symbol of strength and elegance. Perfect for…
Bring a touch of dark academia, Victorian gothic design, and Halloween decor into your home with this highly detailed Gothic Bat Corbel . Designed as an ornate architectural wall bracket featuring a carved bat gargoyle embedded within…
Beskar Ingot: Mandalorian: Star Wars Print standing upright for best details. Textured on all sides.
reproduction de rosace gothique deux modèles un petit modèle avec anneau ( pour porte clés , pendentif) Dia 56 mm un grand modèle pour desous de verre etc..Dia 80 mm Gothic rosette reproduction two models a small model ( with key ring ,…
This is a remix of "Waveshare display (v1/v2) with a PiSugar 1200mAh battery and a carabiner loop" to support the PiSugar2 1200mAh (switched USB charging port/button, and added a slot for the power switch). I made the case and lid a…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
I have created this printable maggot model for use as fishing bait or just for good old-fashioned pranks. Printable with filament or resin. A flexible material is probably best to use. The printed model is about 22.5mm long by 8.9mm tall…
Description Show off your Pokémon fandom with these Pokéball-inspired coasters! Designed with a honeycomb mesh for a flexible, fabric-like look, they’re lightweight, quick to print, and a fun way to decorate your gaming setup or coffee…
This is the Gotcha hands plant pot. This charming pot isn't your average planter – it's equipped with a clever trick up its sleeve. The plant pot employs the classic Hand Circle / Gotcha / Made you look move to encourage its owner to give…
- 15% Infill - Tree Supports To sell this Bookend online , join our patreon for Commercial license patreon.com/MonochromeDesignDE
https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a subscription service on MyMiniFactory, a tribe. I make miniature wargaming and roleplaying game terrain for your home 3D…
Standard pwnagotchi case Build your own pwnagotchi!!! instructions here: https://youtu.be/Gw4yCRKLn3Y Checkout case overview video here: https://youtu.be/KD7heRy_vDg Checkout the how Pwnagotchi build series playlist on my channel page:…
🐺🔥 Carcharoth – Největší Vlk Morgotha | Fantasy Miniatura pro 3D Tisk Carcharoth, známý jako „Rudý Úsvit“ a „Hrozný Vlk Angbandu“, byl největším a nejstrašnějším vlkem, jaký kdy kráčel po zemi. Tento detailní 3D model zachycuje jeho…
Started as a Fusion 360 exercise and ended as a copy of the Punta Mogotes Lighthouse. Based in Mar del Plata, this south Atlantic lighthouse has 36 meters in high and is an iconic structure. Designed in France in 19th century was key to…
Gothic window frame for miniature model making.
A raven perched on the rim of an open bowl, wings folded back so the feather texture wraps the outside of the vessel. The bird and the bowl print as one piece, and the bowl itself is deep enough to hold keys and coins, a small potted…
Easy to print 15% Infill No Supports For Commercial License: MonochromeDesignStl | Patreon
This is a remix of some models Jaime Tachan (jtachan) uploaded on Thingiverse. I have made the coins double sized, smoothed the outer edges and sized each coin to match some other coins I purchased online. The Galleon coin is roughly 39mm…
Help Batman with his trustee Batmobile save Gotham City with this miniature 3d printable toy set. Little Cities is a 3D Printable toy series where miniature buildings and vehicles are stored within a purpose designed case until ready for…
Gothic bracelet Printed with elastic filament (Filaflex) wire:0.7mm Print instructions Category: Accessories Print Settings Printer: prusa i3 Hephestos 1 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 mm Notes: filamento:…
A designful pot inspired by the structure of gothic cone spears. Perfect for your medieval house plants! Print information: Recommended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer…
My old car was a peugot 206 without a cup holder so i made one thats slots in the ciggaret tray. Works with old 33cl cans and medium bottles. Should work with 206 modell from 1999-2007
Here are the files for my Gothic Lantern This is designed to have paper slips added to act as the screens, though I used some 3D effect plastic craft sheets which gave a cool effect. once the screens are slid in the grooves from the…
Dragotaur Baby This little Dragon can be printed down to 60% and fit in your hand. Dragotaur looks like a bull, dragon, and a bird mixed. When I was making it I just went with it and loved how it turned out. 10% infill 3 to 4 lines .1 or…
Warhammer 40,000 11th Edition – Matched Play Terrain Set Dear Wargamers, Thank you for downloading this terrain set, designed specifically for Warhammer 40,000 11th Edition – Matched Play . This project was created as our contribution to…
The Forgotten Helmet is a fierce, battle-worn gladiator mask inspired by the brutal arenas of ancient Rome. Featuring engraved scars, layered cheek plates, and a hollow-eyed stare, this piece captures the raw spirit of a warrior who never…
Bring medieval mystery to your prints with this brooding Gothic Gargoyle Sentinel! Perched atop a square plinth, its muscular form crouches in eternal vigil—horned head tilted forward, razor‑clawed hands gripping the ledge, and vast…
I was greatly inspired by the gothic ruins by Terrain4Print, and I decided to use this inspiration to learn more about modeling and sculpting my own ruins. Here's a simple wall for you. I prints nicely on an FDM printer with no supports.…
Thanks to @meiming for pointing out that it is hard to print this one . I edited it so that depending on your overhangs, you can print it right side up or upside down, and cleaned up a few errors in how I made the scales on the top and…
My hardest to print cauldron! Brims + Supports recommended. Check out my whole cauldron collection! Happy Halloween! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld…
Gothic Archway Door in Ruins.
Gothic Chalice. Lost to many details in the offset. I will come back to this in the not so near future. Way too much work to fix and I will need to start over. But in the meantime--- I will leave this here.
Gothic City is the largest, most modular 3D printable terrain on the market. You can create almost anything you can imagine with Tilescape 2. Check out the pics and videos from the Kickstarter here and purchase all of the components in…
My case for slim edition of Pwnagotchi.
This is full size so........ SCALE PRINTS TO 80% This is designed to have LED lighting with a latchable switch hidden behind the breach. You will need some 1mm thick translucent plastic sheet to cover the openings in front of the grills.…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) GHOST UNDER QUILTED…
A 3D printable water drop design, perfect for decoration, jewelry, or educational projects. Easy to scale and adaptable for various applications. Diseño imprimible en 3D de una gota de agua, ideal para decoración, joyería o proyectos…
