Guest Towel Holder
PLA, 0.2 layer height. No infill used to try to get the clear PLA to actually appear clear.
- Downloads
- 4
- Likes
- 1
- Rating
- 0
59 models
PLA, 0.2 layer height. No infill used to try to get the clear PLA to actually appear clear.
PLA 0.2mm. Numbers were printed without top and bottom layers with 25% honeycomb infill. UPDATE - 01.02.2023. 1. Following suggestions of Chiefton I added "0" and additional base for two digit numbers. 2. Original base is now 0.2mm higher.
This is Guest 666 a giant creature with a dark past and with his best friend as Noob. Because of greed and other sins, he was transfomed by The Spectre into a enormous beast.
A very simple and minimalist holder for your guest towels in the bathroom. The design can be printed on any printer without any problems, even on mini printers with a very small installation space. The holder consists of several parts…
For the model with magnets, you need five round 10mm x 1mm strong magnets (neodymium). The model I printed is the one with magnets, so I can use it as a stand or as a fridge magnet. To create your own qr-code visit…
I resized them to fit the 1/4" and 3/8" connectors on my under-sink water filter. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: n/a Filament: ZYLTech PLA Black Category: Kitchen &…
Gäste/Guests WC Schriftzug/Lettering
This is a soap mold for making handmade soap. This should be printed in TPU or other soft material.
The Beast in the flesh... Noob's best friends turned monster by unknown means, this figure is guaranteed to feed your fears of a large 2-ton beast hurling at you at mach-1. Pose-able in every which way, this figure is a great addition to…
Simple Box to store one roll of toilet paper. Just glue the knob to the lid after printing. Einfache Box um eine Rolle Toilettenpapier als Reserve z.B. im Gäste-WC zu verstauen. Ist die Box leer, kann man diese umdrehen, und es ist der…
go to https://ridercz.github.io/OpenSCAD-QR/ and enter your QR code text, and it will generate the data for you. copy only the qr_data array into the scad file. for guest wifi, use WIFI:T:WPA;S: ;P: ;; , e.g. WIFI:T:WPA;S:Get off my…
John Guest compatible quick disconnect locking clips for tubes with outer diameter of 5/16" (8mm) commonly used on beer
I've seen a picture of the original sign on an image board and was laughing pretty hard. I'm not able to buy it in germany so I decieded to 3D print it. The idea of the sign is not mine but the model is. I'm unsure if I'm allowed to…
New Company Policy - Your boss/manager hung something on the wall - *You → Overview - Gold & dark brown (I have none…) - Glue magnet on the back - Length: 10cm, Width: 8cm Client instead of Guest - Maybe more relevant for some of us Newly…
A simple set of brackets to mount Duotight or John Guest style push fittings. These fittings are commonly used in home brewing, RV water lines, and air lines. I needed quite a lot of these when I was upgrading the gas on my kegerator, and…
Towel holder for the guest bathroom.
Hier ein Handtuchhalter. Hab es im BambuSlicer geteilt mit Zapfen
Scaled down XY to fit push-fit connectors for 10mm JG Speedfit pipe. A size commonly used in the UK for central heating and low-flow outlets (e.g. sink taps/toilet cistern) Would advise printing in PETG or ABS for use on central heating…
Wifi QR code guest network scan Use https://qr.io/ Make u network then take a print screen of the qr code and print it out from paint. then u dont have to pay for it. Enjoy
I use John Guest fittings to fasten hoses when carbonating homebrewed beer. It works very well, but the fragile hose-locking part in the fittings breaks very easily rendering the fittings useless. I have not been able to find this spare…
I set up a second WiFi router in my house to be used by guests. I printed out the password and this nice Doors of Durin and put it on my wall so I can point to it when guests want to know my WiFI password Use the openscad file to make…
An insert for Awkward Guests 2, the Berwick Sisters, and holds all the KS extras. Fits sleeved cards, hard to find appropriate sleeves but I used Mayday (50x75mm) and cut off 3-4mm of excess. Two trays with lids, removeable for play. The…
The card tray is a customized version of https://www.thingiverse.com/thing:1109083 There are 2 versions of the card tray: one whole, and another is split in two, for gluing. I don't have that big of a print bed to print in its entirety.…
PLA; tryska 0,4; výplň 0; perimetry 3
It's an old family joke, we had a "guest toothbrush" that we offer to our overnight guests who forget to bring their own. Now I have finally realized a ‚real‘! Offer this toothbrush to your overnight visitor or friend and earn a shocked…
Do you own a vacation rental/guest house or have elderly parents that forget where things are? We've been there, new to a house but can't find anything in the kitchen, nothing more frustrating than that. Kitchen cabinet/drawer identifier…
Here's a guest towel holder for your bathroom with a wooden, organic, flowy vibe. It fits four towels ( ca. 29x48cm / 11.4 x 19 inches each), folded once and then rolled up. The model is meant to be taped to your tiles or wall. I used…
credit for the main base goes to @FanBloxCompany he makes cool things go check out his profile the body is made by @FanBloxCompany the credit goes to them use treesupports and petg i have added designs and weapons
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
If you have modern WiFi router, there is a good chance you can enable a "Guest WiFi" network; that is, a network that can be used by guests to connect to the internet, but NOT browse other machines on the same network. It's very nice to…
Insert for the Awkward Guests boardgame with room for all KS extras. No need to break down any standees for storage. Printed on AnkerMake m5, default settings. 0.4mm nozzle, PLA+. Used supports for part 2 of the card caddy.
cant wait for the lms with slasher
My Swift motorhome has 12mm OD pipes so I've simply upscaled the 8mm jig in from jrandombob and tested it fine with the 12mm tubing. Printed with 100% infill for strength. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts:…
An insert for Awkward Guests 2, the Berwick Sisters, and holds all the KS extras (including the Awkward Secrets 2 booklet) with no lid lift. Supports vertical storage. I haven't sleeved yet, but it should fit sleeved cards. I had to trim…
A QR code that says "Guest WIFI" but Rick rolls you. Category: Other
Turns a Raspberry Pi 4 into a guest access point with periodic SSID + Password changes. The credentials are shown on an E-Ink display as a scannable QR-Code. The QR-Code, SSID, Password and expiration date are optionally also visible from…
Printed with PLA. Changed Filament after finishing with Layer 10 (Standard Print Quality: 0.2mm) I designed different variants of labels and tags. Don't hesitate to contact me if you need the files in a different format. I will try my…
Just a sign with the lettering “Gäste”. Print as a single object and maybe paint the elevated parts. Version 2 is with rounded edges.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 106.33x150mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.1mm…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A blocky figurine of the classic default Roblox…
Tags for guests to show side of the family, whether it is a guest of the bride or the groom or both. FOR CLIP FILE: - no infill requried - suggested generator Arachne (PrusaSlicer 2.5+) - print on sidewall like on the picture FOR OTHER…
Print with 0.1 or 0.2 layer height with PLA use Supports (tree supports in cura are much better) use brim if you need 5% infill customize your table with the colors that you like do you need 2 down (print on one face) and 1 up (print on…
Uses #6x1/2" wood screws. 0.25mm tolerance You will need a big printer for the large pieces. The smaller ones are more compatible. Designed around a rounded couch arm that is about 7.25" wide and 6" tall.
Description Here is the 3D model of the " GuestinPiano " logo, designed as a neon-style desk light with an adjustable RGB LED strip. The model is divided into two parts: The body: to be printed in black PLA for a solid and elegant…
John Guest fitting tightening/loosening wrench; I searched all over the internet but the only option was to buy the original tool which cost over €10, this one costs less than 10 cents. It can be printed in PLA which is strong enough.
Atithi Devo Bhava Wall Art, Welcome Art
Super simple, easy to print sign for guest towel in bathroom :)
This is Guest 666 a giant creature with a dark past and with his best friend as Noob. Because of greed and other sins, he was transfomed by The Spectre into a enormous beast.
Here's a guest towel holder for your bathroom with a wooden, organic, flowy vibe. It fits four towels ( ca. 29x48cm / 11.4 x 19 inches each), folded once and then rolled up. The model is meant to be taped to your tiles or wall. I used…