1,856 models
A must-have for the MK4! The trough of the Z-spindle is protected from falling filament pieces, and thanks to the two halves, it's also easy to install. Absolutely essential for every MK4 owner! With this ingenious accessory, the trough…
Whole balls and half balls included ALL 25% Scale Recemented. 20% infill, the more the heavier These are just for fun, and not intended do be used as real use balls. i use them to throw upwards laying down if i'm bored and thinking of new…
Toolbox socket organizer for 1\2 inch sockets. The base is designed to accept a 10x3mm magnet as the base is printed at a .2 layer height. I printed all of these on a Creality CR-10S and placed a M25 pause between layer 16 and 17 in order…
Good morning, and welcome to the Black Mesa Transit System! Do you remember the time Gordon Freeman making his friends in the Half-Life Series ? I'll bet yes! However, we are all getting older, the first Half-Life was published back in…
Be aware that the printing parameters reflect for only a half sphere! I recommend not to print the whole thing at once to spare you the trouble of printing unnecessary supports and their removal of it. I recommend to print two half…
Info: easy print no supports nice fit on original bricks
Stackable Insertbox 1x1 units in footprint, 1/2 height two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-19 v2.2 initial public…
Was looking for an egg holder for the eggs we get from our chickens, and this was exactly what I was looking for! It was just a bit too big! So I modified the design to hold 6 egg each. Thanks to the original maker:…
Stackable Insertbox 1x2 units in footprint, 1/2 height two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-19 v2.2 initial public…
This is a simple bracket that can be printed as a half-height bracket for single-port Mellanox ConnectX-2 PCI cards. This is a remix of rasarmg's “PCI Bracket Generator” on Thingiverse , and is only a very small addition to it. If you…
The Gen2 system (by Jerrari ) combined with Gridfinity is a flexible storage system. Why waste space when you can use it. So I added an extra column Gridfinity Half Grid (by HuMa ) to the empty space. The Gridfinity bins can have a height…
Stackable Insertbox 1x3 units in footprint, 1/2 height two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-20 v2.2 initial public…
Stackable Insertbox 2x2 units in footprint, 1/2 height, 3x3 grid two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-21 v2.2…
Stackable Insertbox 1x2 units in footprint, 1/2 height, 2x1 grid two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-20 v2.2…
So I had some centaurtaurs , an infinite centaur , and some reverse centaurs but I realized that I was missing this abomination. I am not sorry. I used the classic tumblr post by maariamph as a reference Category: Games
Stackable Insertbox 1x2 units in footprint, 1/2 height, 1x2 grid two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-19 v2.2…
Compatible with the original CFT1 v1, Half Upgrade, and the v2. Use v2 models for Half Upgrade and v2 radio. The v1 case provides a slightly more compact case for the original CFT1 but will not work with the Half Upgrade or v2. The v2…
I would recomend halfing your printspeed if you like to print it in original size. Trust me the model looks way better, if you paint it ;) If you love this design and want to see more fun projects like it, consider joining my club on…
Stackable Insertbox 2x3 units in footprint, 1/2 height, 2x3 grid two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-22 v2.2…
This is just one box of a bigger system with more than 100 variants in size and partition. Find the whole overview here. compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link…
UPDATE 2: I've included two new models for those looking to print the parts individually (and then use a drop of glue to hold together). The files are: Individual-Arrow_Only & Individual-Case_Only (which actually has the arrow hole sized…
Stackable Insertbox 2x3 units in footprint, 1/2 height, 2x5 grid with label holder in each partition two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link…
Stackable Insertbox 2x3 units in footprint, 1/2 height, 3x2 grid with label holder in each partition two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link…
Ported from HL2 zombie torso model, cut the model from its claws and there it is. All supports, size, parts etc. are up to user to tweak and change.
This is just one box of a bigger system with more than 160 variants in size and partition. Find the whole overview here. compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link…
A cap to fit inside the “half” dust covers from the original model(s). Printed in PLA 0.3mm layer height and 0.6mm nozzle without supports on flat side. For a looser fit print in original size, for a tighter fit (e.g. 103% scaling in x…
Credits for the tracks, roller and wheelpins got to IDEA 1.61 . Nice old vintage halftrack with movable wheels and tracks.
Another quick optical illusion motor visualizer. This gives a nice 3d effect, almost Death Star in its' appearance. Like my others with fine details, a 0.25mm nozzle is highly recommended, again the Revo 6 is the way to go on this front.…
I printed it using two color metallic PLA filament and the octagram spiral pattern on the top and bottom. You can obtain the printing setup form the gcode (for Prusa XL) below. The result looks quite good, and given the minimal effort…
Dish Sponge Tray - for IKEA Vattudalen Half-Size-Sink A dish sponge tray with holes for wringing out the sponge. Fits 2 sponges. Length 96 mm, width 75 mm or 1 big sponge 96x150 mm. With holes for excess water or dripping out. Dimensions:…
print without walls and 0 bottom top layers, grid infill, choose infill %, higher for lower space (so no nuts fall)
EN: To indicate that the container is half-full. To identify the half-full reading or position indicator on the display or container. DE: Um anzuzeigen, dass der Behälter halbvoll ist. Zur Identifizierung eines halbvollen Behälters auf…
Unfortunately, the external storage was always just lying around the computer. I thought it would be better to attach it to the side of the computer. It's not a big deal, but I think it's practical.
…Please be sure to hit like & post a make, I'd love to see your prints! EDIT: Finally! STEP file has been added!! Sorry it took so long guys, enjoy!! Add some class to your Voron with this awesome canopy / top hat! If you have a smaller…
Gridfinity Ultra Light Bin Generator Online Check out the Gridfinity Ultra-Light Bin System. With so much to print in the Gridfinity universe, this system helps you save time, filament and money, allowing you to print even more Gridfinity…
Half Moon Planter A half moon shaped planter for indoor plants and succulents. The planter has draining holes and the plate to hold the excess water. For color change, you can change filament at height 10 mm. Easier print which require no…
Talon/half-length nerf magazine designed to be vertically printed in record time. Faster to print, more modular design, more compatibility, more customizability! Print this with 1 wall with a good PLA+ filament and it'll be a strong,…
MegaXL Spigot SCAR The MegaXL Spigot SCAR (or Silly Scar) is a SCAR attachment for 16mm OD aluminum Nerf hobby barrels that stabilizes darts, is easy to attach and detach, is fully air-sealed, and it allows you to fire MegaXL darts off…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
the spring is recomended to print on PETG, mag bott 2 is of a tighter fit, on my print it just snapped right in without any glue needed
For storing and organizing/reorganizing very small hardware, example m2 thru m6 nuts screws washers from sets. Great if you are constantly adding new sizes and types because the double or 5x boxes are a hassle to reorganize if you add one…
The source marked this model as adult content.
Half dragons! Print them with a ton of supports and a raft. Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here:…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here is a 3-Way Elbow designed to…
Máscara de media calavera / Half Skull Mask
I had some spacing next to the gridfinity base plate inside my drawer, so I remixed the incredible Gridfinity base grid with snap connections by Neel and created some spacers. In this version, there is a half grid before the spacer. Maybe…
Printing I printed the bins with both 0.4 mm and 0.6 mm nozzles, both work fine. There are all variations of the bins from 1x1x1 to 7x7x10, in regular- and half-grid variations (although most are obviously untested). Recommended settings…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
NOT TO BE SOLD BY FRONTLINE FOAM OR BLASTERGUYS POTATOFEEDERNERF IS ALLOWED TO SELL OFF REMAINING STOCK UPDATE 29.08.25: added a 55mm neck option UPDATE 09.08.25: updated the .3mf with the newest parts UPDATE 31.07.25: Modified the necks…
Introduction: This 608 roller bearing features a half cage print-in-place design optimized for 3D printing. The rollers have a dynamically changing cross-section, allowing both radial and axial load capabilities. Its unique half-cage…
A half height beer crate to store 14x2 (28 total) CR2032 (or thinner) coin cells. Fully compatible with the original battery beer crate design. The gluable bottom part from the original also fits. Stacking two of these half height crates…
I needed a 1/2 a tile width to finish the wall I was putting my organizer on, so I decided to remix a full one down to size. I created both edge types to fit in vertical and/or horizontal arrangement. Like the full size tile, all edges…
This is a part of the Botanical Collection available in our Printables Club. A geometrical design inspired by plant ornaments and crystal structures. Very easy to print and looks great in modern interiors! Print information: Recommended…
The height of the characters is 14 - 14.5 cm, the other objects are proportional to the characters - sorry for the poor photo quality! Print Settings Notes: You can use the complete figure OR the splitted Files (zip-archiv on Thingiverse)…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are 4-Way and 5-Way Tees…
I like the reduced design language of this bowl. Mostly simple geometries like circles are used to build this bowl. Prints without support. Best results with the following params: Matte PLA Fuzzy Skin (0.5mm point distance, 0.1mm fuzzy…
UPDATES: 20250123 - Added RPi3B Variant but I don't own an rpi3B so check before printing! 20250123 - Added Headrail files since I didn't include them originally Everyone be sure to check out Jeff Geerling's Github and website for more…
A travelling member of the Little Folk. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis seen in one of the images are available…
If you like this model leave a “like” and download it, and also post your make ;) One half of the heart to give to your better half to put on her/his keys or around her/his neck with a necklace and another half for you.…
These nerf dart with break if they are shot with a high power gun at a hard surface. the one with the tapered bottom is for gluing a small ring of foam on to get a better seal with the barrel of the gun to shoot harder and more accurate.
Inspired by the microjig fitfinder, this tool uses a simple geometric principle to find half the thickness of a piece of wood or other material for setting a saw blade or router bit height. This can be used on materials up to 50mm thick.…
Very simple Half-Life inspired phone holder. It resembles Half-Life Lambda logo with minor tweaks to make sure your phone can sit comfortably on it. It's a very simple print so you can slice the model yourself just the way you like it. I…
Check out the Gridfinity Ultra-Light Bin System. With so much to print in the Gridfinity universe, this system helps you save time, filament and money, allowing you to print even more Gridfinity stuff... It all started with the Gridfinity…
This is just a nut and bolt combo. I am including the .sldprt file so it can be modified, or I can modify if someone would want. Just reach out to me.
Simple print to store your brushes. Please activate the tree supports.
A half-orc lass. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The Half-orc ranger seen in…
To use, print both the left and right halves of either the “Low Profile” or the “Flared" versions. Both of these use the internals from the included X-Shot half length adapter, and both will require some cutting of the adapters…
This is a remix of a design on thingiverse by user justinsprecher (linked below). I remixed his dart cutting jig to cut 38mm long half darts instead of the original 36mm length his jig used. I really liked his design, but 38mm darts are…
Custom Coconut shaped cave for fish, shrimp or reptiles. ~15cm X ~15cm X ~9cm. Designed with 2mm walls and meant to be printed with 100% infill and no supports; thin walls in design make the object unsuitable for significant re-sizing…
Generic half pan dimensions: 19 x 16 x 9.5mm Winsor and Newton variant dimensions: 19 x 15.75 x 8.6mm Some of the W&N palettes will only accept their own slightly shorter pan sizes so I've included this variant. I have many other…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here is a 4-Way Elbow designed to…
Take your half-size bread board, and jam it into this here thing, and BOOM, it looks all spiffy. That's all this really does. It does feel nice to hold and you could argue the breadboard itself is now more stable, but mostly I was just…
M3 Half-Track early Dimensions : 185mm x 70mm x 65mm Impression en PLA : 0,1mm et 0,2mm Chenilles et galets mobiles Assemblage des pièces fixe avec de la colle (Pattex Spécial Plastique) Chenille composée de 48 maillons relier par fil de…
The building is 73mm x 97mm. It's modeled after a half-timbered house in Stolberg in the Harz region. I glued together the walls first and used the wall support frame to glue the parts at 90°. After painting the walls the half- timbered…
I needed a smaller one, same thickness but 50% otherwise adjusted hole size to still work with common screws
About the Model: STLs of full body and parts with aligning pins included. making of video: https://youtu.be/7cmkdSqncbo About the Original Sculpture: Ardhanarishvara Tiruvenkadu, Thanjavur District. Height 101 cm. Around 11th Century AD.…
This nerf half dart grenade activates when you pop the cap, has a timer depending on the different barrels you use, and shoots darts in multiple directions using an internal spinning rod powered by rubber slingshot cord. The time delay is…
Credit to original creator: https://www.thingiverse.com/thing:2994853
I liked the model “Nerf Half Dart Cutter” by justinsprecher on thingiverse but actually printed the 2 Dart Version b Insurgent79 at the time. I felt like 5 Darts would be the perfect amount for the workflow of cutting darts though with a…
7mm thickness work perfect with m6/12mm countersunk screw l cut it into a half so it can be print with noraml 3D printer. It can work ever with PLA and PETG, but the ABS is the best for it.
I recently renewed my network setup at home with Unifi devices. That included Unifi Gateway Ultra, Switch Lite 8 POE. At first I stacked them on each other but it would have bad effect like thermal issues and also not good in terms of…
a cool halfpipe for all your tech deck needs
Same dimensions as the other movement tools in Legion, same width and height. Made grooves for painting, if that's desired. Also a 1.5 range tool for use with deployment cards, where all of them require 1.5 range measurements.
Same Half Orc Barbarian in two poses
Halfmoon Mandala Flower Keychain/Earrings 2.0
I needed some chamber flags so I adopted an earlier lollipop design into this non-snag half moon design which also utilizes some recessed lettering that you can blacken out. I used both PLA and ABS, 50% infill and anywhere from .15% to…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are 5-way and 6-way crosses…
I love these stackable crates by "Majrooo" for storing various items, but for flat things you waste a lot of space, because they only exist in one consistent height of 60 mm. Therefore I took the original model and edited it to get a…
Pferdehalfterhalter für Schleich Horse Club Halfter. Gedruckt ohne supports mit 0.16 Layerhöhe Ich habe auch eine Datei ohne Schriftzug hochgeladen. Damit ist der Halfterhalter individualisierbar. Für das Brettermuster habe ich im Slicer…
This is a single piece, half sized version of the cathedral model. I thickened some walls to make sure all features can be sliced properly at this small size. This model also functions as The Hardest Stringing Test Ever. Print Settings…
Half Life Keycap Printed With Black and Orange
Easy to print, tought and compact construction. Without supports. This track is useful with 90° crossing. See picture. v2: fixed Category: Construction Toys
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are reconfigurable 22.5 & 45…
I wanted a wolf riding druid, so I combined a model from MZ4250 and Printed Encounter
Half-Width Gridfinity Divider Bins I use these to organize my small electronic components. Included Divider Bins: 3x.5 1U Divider Bin 3x.5 .5U Divider Bin 2x.5 1U Divider Bin 2x.5 .5U Divider Bin STEP files are also included if you would…
![Nerf Half Length Dart Cutter [30, 36 & 38mm]](https://media.printables.com/media/prints/457744/images/3763999_e2c77853-c925-4696-8b94-84646396f999/img_20230420_224512.jpg)
