Search results: hoops

Sort order

98 models

P
Printablesmotig

Embroidery/cross-stitch display hoops

These hoops were designed to display embroidery and cross-stitch art, mainly by hanging it via the built-in hole at the top, so you can re-use your quality hoops for ongoing projects and not have to purchase a lot of them. You can also…

Print approx. €1.10–€1.34 excl. taxPreliminary estimate for one variant

Downloads
711
Likes
225
Rating
5
P
PrintablesAinon3Dtisk

Hoops for filament paper spools Pro AMS

Hello, Welcome to my profile, full of models and miniatures :-) I have here for you Hoops for paper spools for filament Pro AMS Thanks to it, the spools unwind much better in the AMS system and do not jam. For proper operation, 2 pieces…

Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant

Downloads
63
Likes
6
Rating
0
P
PrintablesMakerMeik

BetaFPV Air Canopy for lower cam angles - For Air65 and Air75 Tinywhoops

This is a canopy for the BetaFPV Air Tinywhoops, like the Air65 and Air75. The longer tail section allows a lower camera angle to be set. I also made a widening in the area of the right holder to additionally fix the antenna connector. I…

Downloads
2,937
Likes
198
Rating
5
P
Printablesaiye

1/18th scale whoops

Some whoops that can be made as long or short as you want them to be. The ends are reversible, and you can add as many middle sections between them as you need. They have holes to add the connectors in to help keep the pieces from moving…

Downloads
1,243
Likes
182
Rating
4.5
P
PrintablesspectrexFPV

WhoopStor V3 Charging Dock

-------------------------------------- V3.1 IS HERE--------------------------------------- C hangelog: [2024/12/31] - v3.1 partial upgrade Improved power input cutout fitment Improved exhaust fan cutout Reduced pusher gap Increased width…

Downloads
742
Likes
128
Rating
5
P
PrintablesMartin

Thicker BetaFPV Air Canopy for lower cam angles - For Air65 and Air75 Tinywhoops

Someone in the comments mentioned that original canopy is too thin for TPU so I added 0.5mm thickness for it

Downloads
710
Likes
73
Rating
5

betafpv c03 ultralight camera mount for 65mm whoops all common angles

the camera mount from the five33 whoop These mounts are designed and used by Team BlueEyes in the Italian Whoop League 30 deg 35 deg 37 deg 40 deg print settings: infill: 100% use tree supports fillament: tpu .2 layer also on thingiverse:…

Downloads
471
Likes
29
Rating
0
P
PrintablesKelly Maguire

Decorative embroidery hoops for finishing work

I created these because I was frustrated by the lack of options for framing finished cross stitch projects. A springy insert provides tension from the inside. They are not really suited for working on a project due to the bracing in the…

Downloads
354
Likes
159
Rating
5
P
PrintablesAndrás Bognár

Unbreakable Propeller Guard for CineWhoops (The Engineer's Approach)

Say hello to never buying another propeller guard for your cinewhoop :) Update 19.05.2024.: See the upgraded, better version here: https://www.printables.com/model/884159-unbreakable-propeller-guard-for-cinewhoops-upgrade A little back…

Downloads
347
Likes
36
Rating
0
P
PrintablesJarda

Garden Plant Support – Plant Support Hoops

Garden Plant Support – Plant Support Hoops Print instructions Plant support hoop with full round shaped hoops. Size: 140x146x4,2mm for .amf .gcode (140%) Size: 80x128x3mm for .stl ( 100%)

Downloads
305
Likes
82
Rating
5
P
PrintablesAndrás Bognár

Unbreakable Propeller Guard for CineWhoops – Upgraded version

After a year of use of my original design I refined it to make the outer ring more flexible but the inner part more rigid and durable. I also shaved off 3 grams! Let me know your experience with these parts in the makes & comments…

Downloads
272
Likes
30
Rating
0
P
PrintablesJimReplicates

Quidditch Pong Hoops (Unofficial)

(Also Quidditch Beirut, for the traditionalists ;) ) This is a simple "Quidditch" hoop set for the increasingly popular Quiddich Pong game. Its basically American Beer Pong with hoops added to the game board for more complex gameplay. I…

Downloads
252
Likes
26
Rating
4.75
P
PrintablesDohara

Basketball earrings Raised stud and hoops

Basketball earrings Raised stud and hoops. Layer color change. I have uploaded the bambu studio 3mf files as well as the stl. I printed in a .2 nozzle on an A1 mini I use bambu studio, add the 2 stls and click yes to load as one object.…

Downloads
241
Likes
39
Rating
0
P
PrintablesSirPrintsALot

Whoops! Backspace Eraser Keycap

Printing Notes: I reduced the perimeters from 3 to 2 to make the text look better. Printed at 0.10mm height. Filament used: Overture Matte Pink PLA Post print additional work: I filled in the lettering with the some nail polish. Make sure…

Downloads
207
Likes
120
Rating
5
P
PrintablesUPVIS

1S LiPo Storage and Vifly WhoopStor 3 Charging Case - 30 LiPos

1S LiPo Storage and Charging Case for up to 30 LiPos. Optimized for the ViFly WhoopStor 3 Charger. Includes a Lid to close it, but I never use it myself. You are fine just using the charging case by itself to organize your LiPos.

Downloads
205
Likes
16
Rating
0

Swimming pool game floating cone and hoops

Better if printed with low infill, random seams, at least 3 walls and ASA with a little coating of epoxy for durability.

Downloads
197
Likes
54
Rating
3

1s 2s 3s Lipo Battery Cases for your Whoops

I love to fly Tiny/Cine Whoops and the small lipo batteries can easily get damaged or lost when not in use. These have been handy and quite rugged! There are options for 1 - 3s sizes. I will be adding more variants as well. I printed them…

Downloads
165
Likes
13
Rating
5
P
Printablesjgonnot

Brother innov'is hoops hook

the hoops take fare less place with this hooks, it's a great organisation improvement. printed with no supports. for the fixation., you need three countersunk screw (head diameter=7mm and thread outer diameter=4mm) printed in PLA one year…

Downloads
155
Likes
36
Rating
0
P
PrintablesDrewLittleFPV

Tiny Whoop and Vifly WhoopStor v3 storage case

I really liked the lower portion of the WhoopDegen Case designed/remixed by Jron2008 on thingiverse, but was not a fan of the outer box/hinge design, the large screw holes not matching the screw size and needing nuts, and the wasted space…

Downloads
151
Likes
36
Rating
5
P
PrintablesMagda j

quidditch hoops for fishtank

just some décor for your fish tank cut two hoops to 8cm lenght

Downloads
141
Likes
14
Rating
5
P
PrintablesCrambambuli

Whoopstor & Toothstore BT2.0 Battery case

Storage for 24 1s 300mAh BT2.0 batteries with integrated Whoopstor v3. ..or 12 450mAh Batteries and the Toothstore. To build this you need one M3x8 and an M3 insert (voron standard). Print without support. (2024.04.03 Modell has been…

Downloads
129
Likes
19
Rating
5
P
PrintablesJoe

Mini Hoops for Dog Agility (Hoopers / NADAC)

This set of miniature hoops is designed for dog agility training, specifically for Hoopers and NADAC courses. The models are scaled at 1:40, making them perfect for creating detailed, small-scale training courses. The hoops can be…

Downloads
121
Likes
6
Rating
0
P
Printablesjgonnot

brother innovis hoops hook V3 screw and skadis fixation

the standard version of this hook need three screws, and the skadis version is compatible with the Ikéa skadis pegboard. if you decide to print the skadis compatible version, you need a hammer to push "gently" the skadis hook in place, be…

Downloads
97
Likes
22
Rating
5
P
PrintablesNotARealDragon

VIFLY WhoopStor charger case

A box for storing a VIFLY WhoopStore 1s LiPo charger (https://www.viflydrone.com/whoopstor.html) together with a short cable (the included USB-C cable or similar). The lid comes in two versions, with and without text ("VIFLY WhoopStor")…

Downloads
96
Likes
14
Rating
0
P
PrintablesDanae

Earring rombo pendant aro easy hoops

This is a model that would be called 'attached to the ear'. The millimeter I used is 6mm, The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10%…

Downloads
94
Likes
22
Rating
0
P
PrintablesZoe Corkhill

Display Embroidery / Cross Stitch Hoops for Ornaments - Remix with Backing Panel

I was designing Christmas ornament designs for 80mm / 3 inch hoops for an Advent Calendar stitch along. on my blog (hence the blurred design - it's a surprise!) and wanted to print some display hoops with an added back piece - so I…

Downloads
84
Likes
25
Rating
0

Case for 65mm brushless Tiny Whoops

I designed this protective case for my BetaFPV Meteor65 Acro with extra space for a TBS Crossfire MiniMortal T Antenna, but I guess you can use this case for any kind of 65mm Tiny Whoop - max. height are 39mm, motor screw height not…

Downloads
82
Likes
5
Rating
0
P
PrintablesUndead

Betafpv Air65/Air75 + Whoopster + batteries snap-on case

I couldn't find a case to fit my Air75 and a v whoopster together. You can also add batteries in rest of the compartment Print suggestions: 15-20% infill Print with flat size at bottom Features: Requires no support. Snap-on fit

Downloads
81
Likes
7
Rating
0
P
PrintablesSenki_86

Zootopia - Judy Hoops

Thank you for downloads, likes... Enjoy the model !

Downloads
74
Likes
11
Rating
5
P
PrintablesJake White

VIFLY Whoopstor 3 case & battery storage

Case for using and storing the Whoopstor 3 charger and 6 batteries. Lid is designed to fit underneath the case when in use and has cutouts for charging port and vents to allow charging in place. The fit is a bit tight (0.25mm) so sanding…

Downloads
62
Likes
9
Rating
0
P

Hooks to hold Mighty Hook Hoops

For both 5.5x5.5 and 10"x10"

Downloads
56
Likes
6
Rating
0
P
Printablesredthemesetup

Ultralight Dipole antenna holder for Whoops

This is an ultralight ultrasecure dipole antenna mount for canopies that just use the front holes on the stack. Works on the air65 frame for sure, but will work on any whoop that you can squeeze an antenna between the back brace and aio.…

Downloads
42
Likes
5
Rating
0
P
PrintablesKidCe

Tressym Joker racing canopy for tinywhoops by edwardsch - With markings

Just added little indicators to easily differentiate between the models

Downloads
41
Likes
4
Rating
0
P
PrintablesRed2Rhombus

vifly whoopstor + 3 65mm whoops hard case box

needs four 3mm height by 6mm diameter circle magnets for magnetic lid also needs four 30mm m3 button head bolt printed on prusa mk4 with mmu3

Downloads
41
Likes
5
Rating
4
P
PrintablesFarki

Whoopstor V2 slim

Simple model to make your Whoopstor ultra slim! Made to fit my Betafpv case insert Assembly: Disassemble the charger Cut down the female-female standoffs to 5.4mm Set aside original bottom plate and 6 other standoffs (will not be needing…

Downloads
40
Likes
10
Rating
0
P
PrintablesHorror-

Punisher with hoops

Girlfriend wanted one of these with some little hoops on it for sewing onto her backpack, so I added them onto it. To cool for school. Cool model. I'm printing at .5 scale in the Z. Original model was thing:463900 from SuperClam, credit…

Downloads
38
Likes
9
Rating
0
P
PrintablesMark

Whoops! Dry Eraser Holder

This is a hook meant to slip over the top of a hanging white board to hold the eraser.

Downloads
38
Likes
5
Rating
0
P
PrintablesLayer2Layer

Replacement Ear hoops

I needed some replacement hoops for some JEM wireless earbuds (specifically the HXEP400B set) and could not find replacements that fit. So i made em. might have to scale up/down for your specific printer but it prints good on my Anet…

Downloads
38
Likes
5
Rating
0
P
PrintablesMaksym Lazun

Plug Vifly Whoopstor 3

Simple one piece plug for Dc and XT60 port for Vifly Whoopstor 3

Downloads
37
Likes
7
Rating
0
P
PrintablesEddieCoast
18+

The source marked this model as adult content.

Downloads
36
Likes
13
Rating
0
P
Printablesstylesuxx

FPV Gates for Whoops and Micros (customizable)

The attached STL's are for a hexagonal (6x corner pieces) gate and wooden strips with the dimensions of 10x5mm the length of the sticks is variable, I used different lengths to see which one I like best and I settled with 170mm. I use m…

Downloads
34
Likes
9
Rating
0
P
Printablesrhaen

VIFLY WhoopStor JST PH 2.0 Dust Protector

Dust Protection Cap for VIFLY WhoopStor – JST PH 2.0 Connectors This model is a simple but effective dust protection cap designed for the JST PH 2.0 ports on the VIFLY WhoopStor charger. It helps prevent dust, dirt, or debris from…

Downloads
33
Likes
5
Rating
5
P
PrintablesJonathan B

A TinyWhoops worst Nightmare

the worst nightmare for a tiny whoop: A FEILD OF LONG GRASS. This is a joke model that tiny whoop enthusiasts can put on their desk. I recommend you to print it with supports but the cool thing is that you dont even have to remove them…

Downloads
32
Likes
5
Rating
0
P
PrintablesTmate

Whoopstar V3 Battery Stabiliser/Holder

Mount with existing screws on the charger. Its quite snug, may need a some convincing push in/out at first with a less tuned printer. Onshape link

Downloads
30
Likes
3
Rating
0
P
PrintablesBURDFAMFPV

04 lite for whoops

whoop canopy re-mixed made it slightly taller so its clears electronics

Downloads
30
Likes
2
Rating
0
P
PrintablesRodrigo Sclosa

Insta360 Go 2 Dual Mount for Toothpicks and Whoops

My remix of https://www.thingiverse.com/thing:4792436 to use Small mount to use with the Toothpick PicklePod2 Insta360 holder ( https://www.thingiverse.com/thing:3944156 ). Print Settings Printer: Delta Rafts: No Supports: Yes Infill: 20…

Downloads
30
Likes
3
Rating
0
P
PrintablesDanae

Earring Star three big hoops

This is a model that would be called 'attached to the ear'. The millimeter I used is 6mm, The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10%…

Downloads
30
Likes
13
Rating
0
P
PrintablesCrambambuli

Batterybox Whoopstore 1s

This is gen 2 of my whoopstore battery holder. The appartment next to Whoopstore is for used batties .. but it is not that practical.. please comment and suggest updates :)

Downloads
28
Likes
7
Rating
5
P
Printablesramity

Embroidery Hoops

4x4 hoop inserts compatible with a Brother embroidery machine.

Downloads
27
Likes
3
Rating
0
P
Printablesmakesomemore

Makesomemore 40mm duct for tinywhoops

40mm duct not unlike the ones seen on jacks3dprinting hope they work well for you! let me know if you need them adjusted

Downloads
24
Likes
3
Rating
0
P
PrintablesAndrey Moskal

vifly whoopstor 3 case

case for vifly whoopstor 3. to speed up the time of preparation for the flight. allows you to charge batteries in the backpack while you get to the spot.

Downloads
23
Likes
5
Rating
0
P
PrintablesSondre Hetland

Dual Tiny Whoop Case for 65mm & 75mm Whoops

Can't decide whether to fly your 65mm or 75mm whoop? Bring both! This hard case keeps them protected and makes them easy to carry wherever you go. Two storage compartments keep your charged and discharged batteries separated.…

Downloads
23
Likes
3
Rating
0
P
Printables3D-Craft

Meteor65 Pro II O4 – Rugged FPV Case | 12× LiPo + VIFLY WhoopStor 3

Meteor65 Pro II O4 – Rugged FPV Case 🚁 Everything you need for your Tiny Whoop adventures! I designed this rugged transport case to keep my BETAFPV Meteor65 Pro II O4 , LiPo batteries, and charging equipment organized and protected in one…

Downloads
23
Likes
4
Rating
0
P
PrintablesLance Goad

Whoopstor 3 1s Battery charger Gridfinity 2x3

So I needed a way to carry my tinywhoop, and I really liked the U.S. General gridfinity setup that Uncle Jessy showed off. This is just one of the bins that I made for my system.

Downloads
22
Likes
3
Rating
0
P
PrintablesmAtoOo

[Better screw-holes] BetaFPV Air Canopy - For Air65 and Air75 Tinywhoops

I had to edit the screw mounts for better grip to the Flight Controller and the Body and also make the camera scew thicker because there was not enough grip and my camera was rotating when printed out of TPU. - Screw holes have a thinner…

Downloads
22
Likes
3
Rating
0
P
Printablesrhaen

Skadis VIFLY WhoopStor 3 / SkyRC B6 Neo+ Charger Mount

Skadis Mount for VIFLY WhoopStor 3 Keep your workspace tidy and your gear right where you need it! This custom mount allows you to securely attach the VIFLY WhoopStor 3 or SkyRC B6 Neo+ charger to an IKEA Skadis pegboard. No more loose…

Downloads
21
Likes
5
Rating
0
P
PrintablesWavz3D

ViFly Whoopstor V2 Case

Case for your ViFly Whoopstor V2. Covers up the side ports to ensure dirt stays out so be sure you only need the top ports to charge.

Downloads
20
Likes
2
Rating
0
P
PrintablesVariety_Dragon

collapsible hoopskirt

Finally after 3 long years it's here! The bell of the ball collapsible hoop skirt revived! Detailed instructions to come later. This is an early release. I recommend printing the hatbox first. You will need it to form the circle shape.…

Downloads
20
Likes
15
Rating
0
P
Printablesjchun

Torus Distorted Hoops Earrings

Designed for 3D printing using AutoDesk Fusion 360 and Tinkercad. Print Settings Printer Brand: Printrbot Printer: Play Rafts: Yes Supports: Yes Category: Earrings

Downloads
18
Likes
2
Rating
0
P
PrintablesSpaceManFPV

65mm Whoopstorv3 Battery case, whoop charging station

used these small but mighty magnets from amazon, a little bit of superglue and a press fit, and they are in there: https://www.amazon.com/dp/B09Q61B559?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 perfect for 65mm 300-32-mah batteries I have…

Downloads
17
Likes
5
Rating
0
P
PrintablesSondre Hetland

Dual Vifly Whoopstor 3 / Toothstor charger holder

I use this model to hold two Vifly chargers and power them in parallel from a single power source. Compatability: Suitable for both Whoopstor 3 and Toothstor chargers. Support my work: All of my models are available for free. If you'd…

Downloads
17
Likes
4
Rating
0
P
PrintablesJJT

Machine embroidery hoops

Embroidery hoops that I attach to an xy table for embroidery experiments with an old sewing machine. Instructions Embroidery hoops that can be attached to an xy table to embroider designs with a sewing machine. I used and old Singer. It…

Downloads
16
Likes
4
Rating
0
P
PrintablesJSugaya

DJI O4 Wide Canopy for Whoops

Simple canopy to the new DJI O4 Wide with a fixed angle, designed for whoops. Use supports! Particularly, I used tree supports, PETG and full infill.

Downloads
16
Likes
1
Rating
0
P
PrintablesJan Chrastina

Axa bunk bed 200 x 80 cm hoops / circles

It is necessary to play with the diameter and width. Each round hole is a slightly different diameter (+- 1 mm). See picture for dimensions used. The outer circle is printed with luminous material so that the holes are visible at night.

Downloads
16
Likes
0
Rating
0
P
Printablesstylesuxx

Whoop Hoops (Micro Quadcopter air gates)

Whoop Hoops Customizable, illuminatable micro quadcopter air gate system. The goal was to build air gates, or hoops for that matter, for my brushed mini quad , keeping the following design goals in mind: as cheap as possible mountable to…

Downloads
14
Likes
3
Rating
0
P
Printablesdax.neal

Whoopstor Dock (Scott Yu-Jan/OVERWERK design)

FREEDOM against stl Nazi tyranny!

Downloads
13
Likes
4
Rating
0
P
PrintablesJessyjones

MFT Whoopsie counter

I noticed that most people had some space on their MFT rails, especially on the side, so I thought of this little motivational sign that fits right into the rail and dogholes. Kept it rather small (2 dogholes) in order to be printable on…

Downloads
13
Likes
7
Rating
0
P
PrintablesRidethe666

Drone launch platform (ideal for Cinewhoops) - No support

Nothing fancy…just a super simple tool to raise your drone when the ground is un-even or you need to raise your props off the ground. You can add pins to the ground to hold it in place, or place rubber bands to hold it to something…

Downloads
13
Likes
5
Rating
0
P
PrintablesUtgardaLokki

Training Pool Hoops

All the credit goes to this video → 3 variations of hoops + 1 mm to radius, + 2 mm to radius and + 3 mm to radius

Downloads
13
Likes
2
Rating
0
P
PrintablesRaybonz

Plant trellis support hoops

Wanted a reusable hoop to support garden plants to a trellis that is easy to add or remove. Designed in FreeCAD and printed with PETG. Designed in 4 sizes but can be scaled as needed.

Downloads
13
Likes
2
Rating
0
P
PrintablesQuadamoose

VIFLY Whoopstor Bottom Plate

Replacement bottom plate for the acrylic bottom plate of the vifly whoopstor

Downloads
13
Likes
3
Rating
0
P
Printablesdax.neal

WhoopStor Model Make Your Own Scott Yu-Jan Dock

WhoopStor Model Make Your Own Scott Yu-Jan Dock. Be free and remix away! Fight the power! Free Dock stl here https://www.quadsensei.com/product-page/free-stl-vifly-whoopstor-charging-dock-scott-yu-jan-design

Downloads
12
Likes
1
Rating
0
P
Printablesdfuruta

brackets for greenhouse bench row cover hoops

Brackets for building a grow tunnel with 1/2" schedule 40 PVC pipe on a greenhouse bench to keep out critters, attach shade cloth or cover, etc. See photos for use and application. Should fit tightly. Drill through the pipe with screws to…

Downloads
12
Likes
11
Rating
0
P
Printablesglenobie

Highlight Maker Hoops Paraphernalia

Can print at 0.3mm layer height. None of the models need supports. Print scoreboard in two colors, changing when text starts. Print sleeve vertically. UPDATE: Added wider versions of the models to accommodate NBA 75 Greatest Players Set.…

Downloads
11
Likes
4
Rating
0
P
PrintablesUseful Items

Customizable Earring Hoops (Free to sell)

This is a simple ear hoop and ear clip that can be worn as is or customized. It weights less that a gram for one, and doesn't really have print info. Please share any pictures of custom earing you made! You are welcome to sell anything…

Downloads
10
Likes
4
Rating
0
P
Printableseried

Led drone gates / rings for microwhoops

Do you need cheap simple led rings/gates for your races? Vitamins PA Nylon Tube Pneumatic Air (10mm external diameter), for a big loop you need about 2 meters (so order 2 pieces of 10x7): https://ebay.us/KynD1p EL strip with battery power…

Downloads
10
Likes
7
Rating
0
P
Printablesboothyboothy

Simple Cable Hoops for the Zonestar P802QR2

Simple thing to provide cables hoops above the motherboard to help tidy the various cables running vertically up the frame. Category: 3D Printer Parts

Downloads
9
Likes
0
Rating
0
P
Printablesknxwbody

HSW - VIFLY WhoopStor 3 / SkyRC B6 Neo 2 Charger Mount (HSW)

This is a HSW compatible storage compartment for A VIFLY WhoopStor 3 or a SkyRC B6 Neo+ or Neo 2 battery charger. @rhaen_3530839's original design is a Skadis mount but I put a Honeycomb mount on it instead. You must use an 'insert-empty'…

Downloads
9
Likes
2
Rating
0
P
PrintablesJames Goulet

Interlocking friction fit hoops

Two nesting hoops with a slight V tape on the outside. Can be used to fix a flexible thin material within the hoop similar to an embroidery hoop. One use might be to make a temporary cover for a bowl of food.

Downloads
8
Likes
2
Rating
0
P
PrintablesD A

VIFLY WhoopStor V3 honeycomb holder

I figured mounting the charger on the wall to charge batteries would be convenient—and it totally is!

Downloads
7
Likes
2
Rating
0
P
Printablesorson80

FPV LED gate for Whoops

ENGLISH BELLOW Makerworld link: https://makerworld.com/en/models/1129625#profileId-1129644 LED branka pro Whoopy Branku můžete přichytit pomocí magnetů, našroubovat na stativ, připevnit vázacími pásky nebo pomocí klipů připojit k další.…

Downloads
6
Likes
7
Rating
0
P
Printablesmakjak

modular embroidery jig for embroidery hoops

A friend asked me to make a jig to set inside embroidery hoops for her machine. I'm honestly not sure of the purpose, but she claims it holds down the backing material. I designed this to be modular so she can add / remove legs as needed…

Downloads
6
Likes
0
Rating
0
P
PrintablesTenta

65mm Whoopster Case inserts & Smaller lid.

Shorter lid will work for when you don't need to carry the charger. The drawer pulls are for easier use of the compartments, no need to dump the whole box to get something.

Downloads
6
Likes
0
Rating
0

GreenHoops

Some glue is required, attach the bin clip to the bottom of the hoop post and the board clip to the back-center of the hoop. The backboard has space for a raspberry pi and LCD counter display . Code for the pi/display can be implemented…

Downloads
6
Likes
0
Rating
0
P
Printablestobey158

Omni Tool (Hoops)

This is Hoops' customized Omni Tool from the video game Grounded. This 3D printable file isn't endorsed by Obsidian Entertainment, Inc. and doesn't reflect the views or opinions of Obsidian Entertainment, Inc. or anyone officially…

Downloads
5
Likes
1
Rating
0
P
Printablessharkman18
Downloads
4
Likes
1
Rating
0
P
PrintablesArthur Both

Polytunnel Hoop Clips - 12 Snap-On Clips for Netting and Fleece on Pipe Hoops, No Supports (OpenSCAD)

Snap-on clips that hold netting, fleece, mesh and polythene onto pipe hoops, cloche tunnels and fruit-cage frames: lay the cover over the hoop and press a clip over both. The flared lips guide it on, and it lets go again when you pull it…

Downloads
4
Likes
1
Rating
0
P
PrintablesFlumen Prints

Tiny TV for Tiny Whoops

A vintage styled TV case for an eyoyo mini monitor that I got from amazon. https://www.amazon.com/dp/B0BNQFYMFS?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1 Plugged a 5.8G Analog receiver from amazon into the monitor. Added…

Downloads
2
Likes
1
Rating
0
P

v1 Whoopstor Adapter

The Beta FPV twincase on Makerworld is great but they only had hold the hexa or whoopstor v3 chargers. We made an adapter to hold the whoopstor V1. Enjoy. Twincase files.…

Downloads
2
Likes
0
Rating
0
P
PrintablesNorgan

Drum hoops - modern flat

I wanted a different colour and style than what is commonly available, so I decided to 3D model a snap and glue design. I used CA glue and light clamping to glue segments, and they seem to hold well. These are a flat modern industrial look.

Downloads
0
Likes
0
Rating
0
P
Printables

1s 2s 3s Lipo Battery Cases for your Whoops

I love to fly Tiny/Cine Whoops and the small lipo batteries can easily get damaged or lost when not in use. These have been handy and quite rugged! There are options for 1 - 3s sizes. I will be adding more variants as well. I printed them…

P
Printables

Tressym Joker racing canopy for tinywhoops

In tinywhoop racing, every last hundredth of a gram counts. But you can't have your camera break in a crash either. You need to find the right balance between durability and weight. That's what the Joker is for. Material: TPU95A. For me,…

P
Printables

Dual Vifly Whoopstor 3 / Toothstor charger holder

I use this model to hold two Vifly chargers and power them in parallel from a single power source. Compatability: Suitable for both Whoopstor 3 and Toothstor chargers. Support my work: All of my models are available for free. If you'd…

P
Printables

modular embroidery jig for embroidery hoops

A friend asked me to make a jig to set inside embroidery hoops for her machine. I'm honestly not sure of the purpose, but she claims it holds down the backing material. I designed this to be modular so she can add / remove legs as needed…

P
Printables

Tiny TV for Tiny Whoops

A vintage styled TV case for an eyoyo mini monitor that I got from amazon. https://www.amazon.com/dp/B0BNQFYMFS?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1 Plugged a 5.8G Analog receiver from amazon into the monitor. Added…

P
Printables

Basketball earrings Raised stud and hoops

Basketball earrings Raised stud and hoops. Layer color change. I have uploaded the bambu studio 3mf files as well as the stl. I printed in a .2 nozzle on an A1 mini I use bambu studio, add the 2 stls and click yes to load as one object.…

P
Printables

HSW - VIFLY WhoopStor 3 / SkyRC B6 Neo 2 Charger Mount (HSW)

This is a HSW compatible storage compartment for A VIFLY WhoopStor 3 or a SkyRC B6 Neo+ or Neo 2 battery charger. @rhaen_3530839's original design is a Skadis mount but I put a Honeycomb mount on it instead. You must use an 'insert-empty'…